Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

3 files changed, 229 insertions, 0 deletions

diff --git a/drivers/phy/axiado/Kconfig b/drivers/phy/axiado/Kconfig
new file mode 100644
index 000000000..d159e0345
--- /dev/null
+++ b/drivers/phy/axiado/Kconfig
@@ -0,0 +1,11 @@
+#
+# PHY drivers for Axiado platforms
+#
+
+config PHY_AX3000_EMMC
+	tristate "Axiado eMMC PHY driver"
+	depends on OF && (ARCH_AXIADO || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enables this to support for the AX3000 EMMC PHY driver.
+	  If unsure, say N.
diff --git a/drivers/phy/axiado/Makefile b/drivers/phy/axiado/Makefile
new file mode 100644
index 000000000..1e2b1ba01
--- /dev/null
+++ b/drivers/phy/axiado/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PHY_AX3000_EMMC)		+= phy-axiado-emmc.o
diff --git a/drivers/phy/axiado/phy-axiado-emmc.c b/drivers/phy/axiado/phy-axiado-emmc.c
new file mode 100644
index 000000000..e0e217477
--- /dev/null
+++ b/drivers/phy/axiado/phy-axiado-emmc.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Axiado eMMC PHY driver
+ *
+ * Copyright (C) 2017 Arasan Chip Systems Inc.
+ * Copyright (C) 2022-2026 Axiado Corporation (or its affiliates).
+ *
+ * Based on Arasan Driver (sdhci-pci-arasan.c)
+ * sdhci-pci-arasan.c - Driver for Arasan PCI Controller with integrated phy.
+ */
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* Arasan eMMC 5.1 - PHY configuration registers */
+#define CAP_REG_IN_S1_MSB		0x04
+#define PHY_CTRL_1			0x38
+#define PHY_CTRL_2			0x3c
+#define PHY_CTRL_3			0x40
+#define STATUS				0x50
+
+#define DLL_ENBL	BIT(26)
+#define RTRIM_EN	BIT(21)
+#define PDB_ENBL	BIT(23)
+#define RETB_ENBL	BIT(1)
+
+#define REN_STRB	BIT(27)
+#define REN_CMD_EN	GENMASK(20, 12)
+
+/* Pull-UP Enable on CMD Line */
+#define PU_CMD_EN	GENMASK(11, 3)
+
+/* Selection value for the optimum delay from 1-32 output tap lines */
+#define OTAP_DLY	0x02
+/* DLL charge pump current trim default [1000] */
+#define DLL_TRM_ICP	0x08
+/* Select the frequency range of DLL Operation */
+#define FRQ_SEL	0x01
+
+#define OTAP_SEL_MASK		GENMASK(10, 7)
+#define DLL_TRM_MASK		GENMASK(25, 22)
+#define DLL_FRQSEL_MASK		GENMASK(27, 25)
+
+#define OTAP_SEL(x)		(FIELD_PREP(OTAP_SEL_MASK, x) | OTAPDLY_EN)
+#define DLL_TRM(x)		(FIELD_PREP(DLL_TRM_MASK, x) | DLL_ENBL)
+#define DLL_FRQSEL(x)	FIELD_PREP(DLL_FRQSEL_MASK, x)
+
+#define OTAPDLY_EN	BIT(11)
+
+#define SEL_DLY_RXCLK	BIT(18)
+#define SEL_DLY_TXCLK	BIT(19)
+
+#define CALDONE_MASK	0x40
+#define DLL_RDY_MASK	0x1
+#define MAX_CLK_BUF0	BIT(20)
+#define MAX_CLK_BUF1	BIT(21)
+#define MAX_CLK_BUF2	BIT(22)
+
+#define CLK_MULTIPLIER	0xc008e
+#define POLL_TIMEOUT_MS	3000
+#define POLL_DELAY_US	100
+
+struct axiado_emmc_phy {
+	void __iomem *reg_base;
+	struct device *dev;
+};
+
+static int axiado_emmc_phy_init(struct phy *phy)
+{
+	struct axiado_emmc_phy *ax_phy = phy_get_drvdata(phy);
+	struct device *dev = ax_phy->dev;
+	u32 val;
+	int ret;
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	writel(val | RETB_ENBL | RTRIM_EN, ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | PDB_ENBL, ax_phy->reg_base + PHY_CTRL_3);
+
+	ret = readl_poll_timeout(ax_phy->reg_base + STATUS, val,
+				 val & CALDONE_MASK, POLL_DELAY_US,
+				 POLL_TIMEOUT_MS * 1000);
+	if (ret) {
+		dev_err(dev, "PHY calibration timeout\n");
+		return ret;
+	}
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	writel(val | REN_CMD_EN | PU_CMD_EN, ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_2);
+	writel(val | REN_STRB, ax_phy->reg_base + PHY_CTRL_2);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | MAX_CLK_BUF0 | MAX_CLK_BUF1 | MAX_CLK_BUF2,
+	       ax_phy->reg_base + PHY_CTRL_3);
+
+	writel(CLK_MULTIPLIER, ax_phy->reg_base + CAP_REG_IN_S1_MSB);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | SEL_DLY_RXCLK | SEL_DLY_TXCLK,
+	       ax_phy->reg_base + PHY_CTRL_3);
+
+	return 0;
+}
+
+static int axiado_emmc_phy_power_on(struct phy *phy)
+{
+	struct axiado_emmc_phy *ax_phy = phy_get_drvdata(phy);
+	struct device *dev = ax_phy->dev;
+	u32 val;
+	int ret;
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	writel(val | RETB_ENBL, ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | PDB_ENBL, ax_phy->reg_base + PHY_CTRL_3);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_2);
+	writel(val | OTAP_SEL(OTAP_DLY), ax_phy->reg_base + PHY_CTRL_2);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	writel(val | DLL_TRM(DLL_TRM_ICP), ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	writel(val | DLL_FRQSEL(FRQ_SEL), ax_phy->reg_base + PHY_CTRL_3);
+
+	ret = read_poll_timeout(readl, val, val & DLL_RDY_MASK, POLL_DELAY_US,
+				POLL_TIMEOUT_MS * 1000, false,
+				ax_phy->reg_base + STATUS);
+	if (ret) {
+		dev_err(dev, "DLL ready timeout\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int axiado_emmc_phy_power_off(struct phy *phy)
+{
+	struct axiado_emmc_phy *ax_phy = phy_get_drvdata(phy);
+	u32 val;
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_1);
+	val &= ~(DLL_TRM_MASK | DLL_ENBL);
+	writel(val, ax_phy->reg_base + PHY_CTRL_1);
+
+	val = readl(ax_phy->reg_base + PHY_CTRL_3);
+	val &= ~(DLL_FRQSEL_MASK | PDB_ENBL);
+	writel(val, ax_phy->reg_base + PHY_CTRL_3);
+
+	return 0;
+}
+
+static const struct phy_ops axiado_emmc_phy_ops = {
+	.init = axiado_emmc_phy_init,
+	.power_on = axiado_emmc_phy_power_on,
+	.power_off = axiado_emmc_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id axiado_emmc_phy_of_match[] = {
+	{ .compatible = "axiado,ax3000-emmc-phy" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, axiado_emmc_phy_of_match);
+
+static int axiado_emmc_phy_probe(struct platform_device *pdev)
+{
+	struct axiado_emmc_phy *ax_phy;
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	ax_phy = devm_kzalloc(dev, sizeof(*ax_phy), GFP_KERNEL);
+	if (!ax_phy)
+		return -ENOMEM;
+
+	ax_phy->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ax_phy->reg_base))
+		return PTR_ERR(ax_phy->reg_base);
+
+	ax_phy->dev = dev;
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &axiado_emmc_phy_ops);
+	if (IS_ERR(generic_phy))
+		return dev_err_probe(dev, PTR_ERR(generic_phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(generic_phy, ax_phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver axiado_emmc_phy_driver = {
+	.probe = axiado_emmc_phy_probe,
+	.driver = {
+		.name = "axiado-emmc-phy",
+		.of_match_table = axiado_emmc_phy_of_match,
+	},
+};
+module_platform_driver(axiado_emmc_phy_driver);
+
+MODULE_DESCRIPTION("AX3000 eMMC PHY Driver");
+MODULE_AUTHOR("Axiado Corporation");
+MODULE_LICENSE("GPL");