Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Fix error output of boot instance creation failure

   Currently if a boot instance creation fails, instead of printing out
   the name of the instance that failed, it prints "(null)". That is
   because it prints "cur_str" that had already been processed by
   strsep(). Print the saved name instead.

   While at it, print the error code of the failure.

 - Fix use-after-free for same named historgrams

   Histograms can be named so that they can be used in multiple events.
   But if the named histogram has a variable attached, the second event
   that uses the named histogram which duplicates it and needs to free
   the original after duplication leaves the old variable in place and
   still visible. If another histogram uses than variable, it will use
   the stale one which will try to reference the freed duplicate
   histogram and crash the kernel.

   Free the duplicate variables along with the duplicated histogram
   data.

 - Check return value of kthread_run() in event self test

   The events self tests uses a kthread for testing but does not check
   if it succeeded in creating a kthread. If the kthread creation were
   to fail, the code will still try to call kthread_stop() on the error
   returned.

 - Fix race between reading trace_pipe and updating subbuffer size

   If a user is reading the trace_pipe file at the same time they update
   the ring buffer sub-buffer size, can cause the trace_pipe read to
   read stale data. Add trace_access_lock() around updating the ring
   buffer sub-buffer size.

 - Fix eventfs_inode on failure path in creation of the events directory

   In the creation of the "events" directory, if after allocating the
   eventfs_inode a failure is detected, it calls cleanup_ei() which
   calls free_ei(). The free_ei() will test if eventfs_inode being freed
   has no children. It is a bug if it does. But on the failure case of
   the creation of the "events" directory, the children lists have not
   yet been initialized and the free will trigger a warning because
   list_empty() on an uninitialized list returns false.

   Move the initialization into init_ei() where it makes more sense and
   makes sure that a created eventfs_inode has its lists initialized
   upon creation.

 - Check return value of kthread_run() in ftrace direct sample code

   The sample code that shows how to use the ftrace direct calls does
   not test the return of kthread_run() to see if it succeeds. Return a
   failure if the kthread_run() doesn't succeed.

 - Clear user events state on fork in case of alloc failure

   On fork, the child gets a pointer to the parent's user events state.
   It makes a copy of it then updates the child's pointer to it. But if
   the allocation fails, the duplication function leaves the child with
   a pointer to its parent's descriptor. When the child cleans up its
   data, it will free the parent's descriptor while the parent is still
   using it.

   In the duplication function, set the child's user_event_mm to NULL
   before testing if the allocation succeeded, and when it exits it will
   not free the parent's descriptor.

 - Fix retry exhaustion in simple ring buffer reader swap

   simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
   post-decrements it only after a failed link replacement. On the final
   attempt, a successful replacement leaves retry at zero, while a
   failed replacement leaves it at -1.

   But the check for success expects the retry value to be non-zero and
   exits with an error on zero. This is the opposite result. Fix it.

 - Fail nicely when the remote swap_reader_page() returns an error

   Currently, if the swap_reader_page() of a remote buffer fails, it
   triggers a WARN_ON_ONCE() and continues normally. Instead, have it
   exit with an error and a pr_warn() print instead of a full WARNING.

* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Stop remote reader update when page swap fails
  tracing: Fix retry exhaustion in simple ring buffer reader swap
  tracing/user_events: Clear copied tracing state before fork duplication
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
  eventfs: Initialize ei->children and ei->list in init_ei()
  tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
  tracing: Fix crash passing ERR_PTR to kthread_stop()
  tracing: Fix use-after-free with same-name named triggers
  tracing: Fix logged instance name on creation failure

11 files changed, 2744 insertions, 0 deletions

diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
new file mode 100644
index 000000000..ce7ba3eb2
--- /dev/null
+++ b/drivers/phy/amlogic/Kconfig
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Amlogic platforms
+#
+config PHY_MESON8_HDMI_TX
+	tristate "Meson8, Meson8b and Meson8m2 HDMI TX PHY driver"
+	depends on (ARCH_MESON && ARM) || COMPILE_TEST
+	depends on OF
+	select MFD_SYSCON
+	help
+	  Enable this to support the HDMI TX PHYs found in Meson8,
+	  Meson8b and Meson8m2 SoCs.
+	  If unsure, say N.
+
+config PHY_MESON8B_USB2
+	tristate "Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	depends on USB_SUPPORT
+	select USB_COMMON
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson USB2 PHYs found in Meson8,
+	  Meson8b and GXBB SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_GXL_USB2
+	tristate "Meson GXL and GXM USB2 PHY drivers"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson USB2 PHYs found in Meson
+	  GXL and GXM SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_G12A_MIPI_DPHY_ANALOG
+	tristate "Meson G12A MIPI Analog DPHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select MFD_SYSCON
+	select GENERIC_PHY_MIPI_DPHY
+	help
+	  Enable this to support the Meson MIPI Analog DPHY found in Meson G12A
+	  SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_G12A_USB2
+	tristate "Meson G12A USB2 PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson USB2 PHYs found in Meson
+	  G12A SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_G12A_USB3_PCIE
+	tristate "Meson G12A USB3+PCIE Combo PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson USB3 + PCIE Combo PHY found
+	  in Meson G12A SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_AXG_PCIE
+	tristate "Meson AXG PCIE PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson MIPI + PCIE PHY found
+	  in Meson AXG SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_AXG_MIPI_PCIE_ANALOG
+	tristate "Meson AXG MIPI + PCIE analog PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	select GENERIC_PHY_MIPI_DPHY
+	help
+	  Enable this to support the Meson MIPI + PCIE analog PHY
+	  found in Meson AXG SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_AXG_MIPI_DPHY
+	tristate "Meson AXG MIPI DPHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	select GENERIC_PHY_MIPI_DPHY
+	help
+	  Enable this to support the Meson MIPI DPHY found in Meson AXG
+	  SoCs.
+	  If unsure, say N.
diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
new file mode 100644
index 000000000..91e3b9790
--- /dev/null
+++ b/drivers/phy/amlogic/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_MESON8_HDMI_TX)		+= phy-meson8-hdmi-tx.o
+obj-$(CONFIG_PHY_MESON8B_USB2)			+= phy-meson8b-usb2.o
+obj-$(CONFIG_PHY_MESON_GXL_USB2)		+= phy-meson-gxl-usb2.o
+obj-$(CONFIG_PHY_MESON_G12A_USB2)		+= phy-meson-g12a-usb2.o
+obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE)		+= phy-meson-g12a-usb3-pcie.o
+obj-$(CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG)	+= phy-meson-g12a-mipi-dphy-analog.o
+obj-$(CONFIG_PHY_MESON_AXG_PCIE)		+= phy-meson-axg-pcie.o
+obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG)	+= phy-meson-axg-mipi-pcie-analog.o
+obj-$(CONFIG_PHY_MESON_AXG_MIPI_DPHY)		+= phy-meson-axg-mipi-dphy.o
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
new file mode 100644
index 000000000..5e2b7d93b
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Meson AXG MIPI DPHY driver
+ *
+ * Copyright (C) 2018 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* [31] soft reset for the phy.
+ *		1: reset. 0: dessert the reset.
+ * [30] clock lane soft reset.
+ * [29] data byte lane 3 soft reset.
+ * [28] data byte lane 2 soft reset.
+ * [27] data byte lane 1 soft reset.
+ * [26] data byte lane 0 soft reset.
+ * [25] mipi dsi pll clock selection.
+ *		1:  clock from fixed 850Mhz clock source. 0: from VID2 PLL.
+ * [12] mipi HSbyteclk enable.
+ * [11] mipi divider clk selection.
+ *		1: select the mipi DDRCLKHS from clock divider.
+ *		0: from PLL clock.
+ * [10] mipi clock divider control.
+ *		1: /4. 0: /2.
+ * [9]  mipi divider output enable.
+ * [8]  mipi divider counter enable.
+ * [7]  PLL clock enable.
+ * [5]  LPDT data endian.
+ *		1 = transfer the high bit first. 0 : transfer the low bit first.
+ * [4]  HS data endian.
+ * [3]  force data byte lane in stop mode.
+ * [2]  force data byte lane 0 in receiver mode.
+ * [1]  write 1 to sync the txclkesc input. the internal logic have to
+ *	use txclkesc to decide Txvalid and Txready.
+ * [0]  enalbe the MIPI DPHY TxDDRClk.
+ */
+#define MIPI_DSI_PHY_CTRL				0x0
+
+/* [31] clk lane tx_hs_en control selection.
+ *		1: from register. 0: use clk lane state machine.
+ * [30] register bit for clock lane tx_hs_en.
+ * [29] clk lane tx_lp_en contrl selection.
+ *		1: from register. 0: from clk lane state machine.
+ * [28] register bit for clock lane tx_lp_en.
+ * [27] chan0 tx_hs_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [26] register bit for chan0 tx_hs_en.
+ * [25] chan0 tx_lp_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [24] register bit from chan0 tx_lp_en.
+ * [23] chan0 rx_lp_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [22] register bit from chan0 rx_lp_en.
+ * [21] chan0 contention detection enable control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [20] register bit from chan0 contention dectection enable.
+ * [19] chan1 tx_hs_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [18] register bit for chan1 tx_hs_en.
+ * [17] chan1 tx_lp_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [16] register bit from chan1 tx_lp_en.
+ * [15] chan2 tx_hs_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [14] register bit for chan2 tx_hs_en.
+ * [13] chan2 tx_lp_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [12] register bit from chan2 tx_lp_en.
+ * [11] chan3 tx_hs_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [10] register bit for chan3 tx_hs_en.
+ * [9]  chan3 tx_lp_en control selection.
+ *		1: from register. 0: from chan0 state machine.
+ * [8]  register bit from chan3 tx_lp_en.
+ * [4]  clk chan power down. this bit is also used as the power down
+ *	of the whole MIPI_DSI_PHY.
+ * [3]  chan3 power down.
+ * [2]  chan2 power down.
+ * [1]  chan1 power down.
+ * [0]  chan0 power down.
+ */
+#define MIPI_DSI_CHAN_CTRL				0x4
+
+/* [24]   rx turn watch dog triggered.
+ * [23]   rx esc watchdog  triggered.
+ * [22]   mbias ready.
+ * [21]   txclkesc  synced and ready.
+ * [20:17] clk lane state. {mbias_ready, tx_stop, tx_ulps, tx_hs_active}
+ * [16:13] chan3 state{0, tx_stop, tx_ulps, tx_hs_active}
+ * [12:9]  chan2 state.{0, tx_stop, tx_ulps, tx_hs_active}
+ * [8:5]   chan1 state. {0, tx_stop, tx_ulps, tx_hs_active}
+ * [4:0]   chan0 state. {TX_STOP, tx_ULPS, hs_active, direction, rxulpsesc}
+ */
+#define MIPI_DSI_CHAN_STS				0x8
+
+/* [31:24] TCLK_PREPARE.
+ * [23:16] TCLK_ZERO.
+ * [15:8]  TCLK_POST.
+ * [7:0]   TCLK_TRAIL.
+ */
+#define MIPI_DSI_CLK_TIM				0xc
+
+/* [31:24] THS_PREPARE.
+ * [23:16] THS_ZERO.
+ * [15:8]  THS_TRAIL.
+ * [7:0]   THS_EXIT.
+ */
+#define MIPI_DSI_HS_TIM					0x10
+
+/* [31:24] tTA_GET.
+ * [23:16] tTA_GO.
+ * [15:8]  tTA_SURE.
+ * [7:0]   tLPX.
+ */
+#define MIPI_DSI_LP_TIM					0x14
+
+/* wait time to  MIPI DIS analog ready. */
+#define MIPI_DSI_ANA_UP_TIM				0x18
+
+/* TINIT. */
+#define MIPI_DSI_INIT_TIM				0x1c
+
+/* TWAKEUP. */
+#define MIPI_DSI_WAKEUP_TIM				0x20
+
+/* when in RxULPS check state, after the logic enable the analog,
+ *	how long we should wait to check the lP state .
+ */
+#define MIPI_DSI_LPOK_TIM				0x24
+
+/* Watchdog for RX low power state no finished. */
+#define MIPI_DSI_LP_WCHDOG				0x28
+
+/* tMBIAS,  after send power up signals to analog,
+ *	how long we should wait for analog powered up.
+ */
+#define MIPI_DSI_ANA_CTRL				0x2c
+
+/* [31:8]  reserved for future.
+ * [7:0]   tCLK_PRE.
+ */
+#define MIPI_DSI_CLK_TIM1				0x30
+
+/* watchdog for turn around waiting time. */
+#define MIPI_DSI_TURN_WCHDOG				0x34
+
+/* When in RxULPS state, how frequency we should to check
+ *	if the TX side out of ULPS state.
+ */
+#define MIPI_DSI_ULPS_CHECK				0x38
+#define MIPI_DSI_TEST_CTRL0				0x3c
+#define MIPI_DSI_TEST_CTRL1				0x40
+
+struct phy_meson_axg_mipi_dphy_priv {
+	struct device				*dev;
+	struct regmap				*regmap;
+	struct clk				*clk;
+	struct reset_control			*reset;
+	struct phy				*analog;
+	struct phy_configure_opts_mipi_dphy	config;
+};
+
+static const struct regmap_config phy_meson_axg_mipi_dphy_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = MIPI_DSI_TEST_CTRL1,
+};
+
+static int phy_meson_axg_mipi_dphy_init(struct phy *phy)
+{
+	struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_init(priv->analog);
+	if (ret)
+		return ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_meson_axg_mipi_dphy_configure(struct phy *phy,
+					      union phy_configure_opts *opts)
+{
+	struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
+	if (ret)
+		return ret;
+
+	ret = phy_configure(priv->analog, opts);
+	if (ret)
+		return ret;
+
+	memcpy(&priv->config, opts, sizeof(priv->config));
+
+	return 0;
+}
+
+static int phy_meson_axg_mipi_dphy_power_on(struct phy *phy)
+{
+	struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+	unsigned long temp;
+
+	ret = phy_power_on(priv->analog);
+	if (ret)
+		return ret;
+
+	/* enable phy clock */
+	regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL,  0x1);
+	regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL,
+		     BIT(0) | /* enable the DSI PLL clock . */
+		     BIT(7) | /* enable pll clock which connected to DDR clock path */
+		     BIT(8)); /* enable the clock divider counter */
+
+	/* enable the divider clock out */
+	regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(9), BIT(9));
+
+	/* enable the byte clock generation. */
+	regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(12), BIT(12));
+	regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31), BIT(31));
+	regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31), 0);
+
+	/* Calculate lanebyteclk period in ps */
+	temp = (1000000 * 100) / (priv->config.hs_clk_rate / 1000);
+	temp = temp * 8 * 10;
+
+	regmap_write(priv->regmap, MIPI_DSI_CLK_TIM,
+		     DIV_ROUND_UP(priv->config.clk_trail, temp) |
+		     (DIV_ROUND_UP(priv->config.clk_post +
+				   priv->config.hs_trail, temp) << 8) |
+		     (DIV_ROUND_UP(priv->config.clk_zero, temp) << 16) |
+		     (DIV_ROUND_UP(priv->config.clk_prepare, temp) << 24));
+	regmap_write(priv->regmap, MIPI_DSI_CLK_TIM1,
+		     DIV_ROUND_UP(priv->config.clk_pre, BITS_PER_BYTE));
+
+	regmap_write(priv->regmap, MIPI_DSI_HS_TIM,
+		     DIV_ROUND_UP(priv->config.hs_exit, temp) |
+		     (DIV_ROUND_UP(priv->config.hs_trail, temp) << 8) |
+		     (DIV_ROUND_UP(priv->config.hs_zero, temp) << 16) |
+		     (DIV_ROUND_UP(priv->config.hs_prepare, temp) << 24));
+
+	regmap_write(priv->regmap, MIPI_DSI_LP_TIM,
+		     DIV_ROUND_UP(priv->config.lpx, temp) |
+		     (DIV_ROUND_UP(priv->config.ta_sure, temp) << 8) |
+		     (DIV_ROUND_UP(priv->config.ta_go, temp) << 16) |
+		     (DIV_ROUND_UP(priv->config.ta_get, temp) << 24));
+
+	regmap_write(priv->regmap, MIPI_DSI_ANA_UP_TIM, 0x0100);
+	regmap_write(priv->regmap, MIPI_DSI_INIT_TIM,
+		     DIV_ROUND_UP(priv->config.init * NSEC_PER_MSEC, temp));
+	regmap_write(priv->regmap, MIPI_DSI_WAKEUP_TIM,
+		     DIV_ROUND_UP(priv->config.wakeup * NSEC_PER_MSEC, temp));
+	regmap_write(priv->regmap, MIPI_DSI_LPOK_TIM, 0x7C);
+	regmap_write(priv->regmap, MIPI_DSI_ULPS_CHECK, 0x927C);
+	regmap_write(priv->regmap, MIPI_DSI_LP_WCHDOG, 0x1000);
+	regmap_write(priv->regmap, MIPI_DSI_TURN_WCHDOG, 0x1000);
+
+	/* Powerup the analog circuit */
+	switch (priv->config.lanes) {
+	case 1:
+		regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xe);
+		break;
+	case 2:
+		regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xc);
+		break;
+	case 3:
+		regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0x8);
+		break;
+	case 4:
+	default:
+		regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0);
+		break;
+	}
+
+	/* Trigger a sync active for esc_clk */
+	regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(1), BIT(1));
+
+	return 0;
+}
+
+static int phy_meson_axg_mipi_dphy_power_off(struct phy *phy)
+{
+	struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+
+	regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xf);
+	regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31));
+
+	phy_power_off(priv->analog);
+
+	return 0;
+}
+
+static int phy_meson_axg_mipi_dphy_exit(struct phy *phy)
+{
+	struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_exit(priv->analog);
+	if (ret)
+		return ret;
+
+	return reset_control_reset(priv->reset);
+}
+
+static const struct phy_ops phy_meson_axg_mipi_dphy_ops = {
+	.configure	= phy_meson_axg_mipi_dphy_configure,
+	.init		= phy_meson_axg_mipi_dphy_init,
+	.exit		= phy_meson_axg_mipi_dphy_exit,
+	.power_on	= phy_meson_axg_mipi_dphy_power_on,
+	.power_off	= phy_meson_axg_mipi_dphy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson_axg_mipi_dphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct phy_meson_axg_mipi_dphy_priv *priv;
+	struct phy *phy;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					&phy_meson_axg_mipi_dphy_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->clk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->reset = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	priv->analog = devm_phy_get(dev, "analog");
+	if (IS_ERR(priv->analog))
+		return PTR_ERR(priv->analog);
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return ret;
+
+	phy = devm_phy_create(dev, NULL, &phy_meson_axg_mipi_dphy_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(dev, PTR_ERR(phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_axg_mipi_dphy_of_match[] = {
+	{ .compatible = "amlogic,axg-mipi-dphy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_axg_mipi_dphy_of_match);
+
+static struct platform_driver phy_meson_axg_mipi_dphy_driver = {
+	.probe	= phy_meson_axg_mipi_dphy_probe,
+	.driver	= {
+		.name		= "phy-meson-axg-mipi-dphy",
+		.of_match_table	= phy_meson_axg_mipi_dphy_of_match,
+	},
+};
+module_platform_driver(phy_meson_axg_mipi_dphy_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Meson AXG MIPI DPHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
new file mode 100644
index 000000000..c0ba2852d
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic AXG MIPI + PCIE analog PHY driver
+ *
+ * Copyright (C) 2019 Remi Pommarel <repk@triplefau.lt>
+ */
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#define HHI_MIPI_CNTL0 0x00
+#define		HHI_MIPI_CNTL0_COMMON_BLOCK	GENMASK(31, 28)
+#define		HHI_MIPI_CNTL0_ENABLE		BIT(29)
+#define		HHI_MIPI_CNTL0_BANDGAP		BIT(26)
+#define		HHI_MIPI_CNTL0_DIF_REF_CTL1	GENMASK(25, 16)
+#define		HHI_MIPI_CNTL0_DIF_REF_CTL0	GENMASK(15, 0)
+
+#define HHI_MIPI_CNTL1 0x04
+#define		HHI_MIPI_CNTL1_CH0_CML_PDR_EN	BIT(12)
+#define		HHI_MIPI_CNTL1_LP_ABILITY	GENMASK(5, 4)
+#define		HHI_MIPI_CNTL1_LP_RESISTER	BIT(3)
+#define		HHI_MIPI_CNTL1_INPUT_SETTING	BIT(2)
+#define		HHI_MIPI_CNTL1_INPUT_SEL	BIT(1)
+#define		HHI_MIPI_CNTL1_PRBS7_EN		BIT(0)
+
+#define HHI_MIPI_CNTL2 0x08
+#define		HHI_MIPI_CNTL2_CH_PU		GENMASK(31, 25)
+#define		HHI_MIPI_CNTL2_CH_CTL		GENMASK(24, 19)
+#define		HHI_MIPI_CNTL2_CH0_DIGDR_EN	BIT(18)
+#define		HHI_MIPI_CNTL2_CH_DIGDR_EN	BIT(17)
+#define		HHI_MIPI_CNTL2_LPULPS_EN	BIT(16)
+#define		HHI_MIPI_CNTL2_CH_EN		GENMASK(15, 11)
+#define		HHI_MIPI_CNTL2_CH0_LP_CTL	GENMASK(10, 1)
+
+#define DSI_LANE_0              BIT(4)
+#define DSI_LANE_1              BIT(3)
+#define DSI_LANE_CLK            BIT(2)
+#define DSI_LANE_2              BIT(1)
+#define DSI_LANE_3              BIT(0)
+
+struct phy_axg_mipi_pcie_analog_priv {
+	struct phy *phy;
+	struct regmap *regmap;
+	bool dsi_configured;
+	bool dsi_enabled;
+	bool powered;
+	struct phy_configure_opts_mipi_dphy config;
+};
+
+static void phy_bandgap_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
+{
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
+}
+
+static void phy_bandgap_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
+{
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			HHI_MIPI_CNTL0_BANDGAP, 0);
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			HHI_MIPI_CNTL0_ENABLE, 0);
+}
+
+static void phy_dsi_analog_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
+{
+	u32 reg;
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   HHI_MIPI_CNTL0_DIF_REF_CTL1,
+			   FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0x1b8));
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   BIT(31), BIT(31));
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   HHI_MIPI_CNTL0_DIF_REF_CTL0,
+			   FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8));
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x001e);
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL2,
+		     (0x26e0 << 16) | (0x459 << 0));
+
+	reg = DSI_LANE_CLK;
+	switch (priv->config.lanes) {
+	case 4:
+		reg |= DSI_LANE_3;
+		fallthrough;
+	case 3:
+		reg |= DSI_LANE_2;
+		fallthrough;
+	case 2:
+		reg |= DSI_LANE_1;
+		fallthrough;
+	case 1:
+		reg |= DSI_LANE_0;
+		break;
+	default:
+		reg = 0;
+	}
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2,
+			   HHI_MIPI_CNTL2_CH_EN,
+			   FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg));
+
+	priv->dsi_enabled = true;
+}
+
+static void phy_dsi_analog_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
+{
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			HHI_MIPI_CNTL0_DIF_REF_CTL1,
+			FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0));
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, BIT(31), 0);
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			HHI_MIPI_CNTL0_DIF_REF_CTL1, 0);
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x6);
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0x00200000);
+
+	priv->dsi_enabled = false;
+}
+
+static int phy_axg_mipi_pcie_analog_configure(struct phy *phy,
+					      union phy_configure_opts *opts)
+{
+	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
+	if (ret)
+		return ret;
+
+	memcpy(&priv->config, opts, sizeof(priv->config));
+
+	priv->dsi_configured = true;
+
+	/* If PHY was already powered on, setup the DSI analog part */
+	if (priv->powered) {
+		/* If reconfiguring, disable & reconfigure */
+		if (priv->dsi_enabled)
+			phy_dsi_analog_disable(priv);
+
+		usleep_range(100, 200);
+
+		phy_dsi_analog_enable(priv);
+	}
+
+	return 0;
+}
+
+static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
+{
+	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+
+	phy_bandgap_enable(priv);
+
+	if (priv->dsi_configured)
+		phy_dsi_analog_enable(priv);
+
+	priv->powered = true;
+
+	return 0;
+}
+
+static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
+{
+	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+
+	phy_bandgap_disable(priv);
+
+	if (priv->dsi_enabled)
+		phy_dsi_analog_disable(priv);
+
+	priv->powered = false;
+
+	return 0;
+}
+
+static const struct phy_ops phy_axg_mipi_pcie_analog_ops = {
+	.configure = phy_axg_mipi_pcie_analog_configure,
+	.power_on = phy_axg_mipi_pcie_analog_power_on,
+	.power_off = phy_axg_mipi_pcie_analog_power_off,
+	.owner = THIS_MODULE,
+};
+
+static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy;
+	struct device *dev = &pdev->dev;
+	struct phy_axg_mipi_pcie_analog_priv *priv;
+	struct device_node *np = dev->of_node, *parent_np;
+	struct regmap *map;
+
+	priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Get the hhi system controller node */
+	parent_np = of_get_parent(dev->of_node);
+	map = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
+	if (IS_ERR(map)) {
+		dev_err(dev,
+			"failed to get HHI regmap\n");
+		return PTR_ERR(map);
+	}
+
+	priv->regmap = map;
+
+	priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops);
+	if (IS_ERR(priv->phy))
+		return dev_err_probe(dev, PTR_ERR(priv->phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+
+	phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy);
+}
+
+static const struct of_device_id phy_axg_mipi_pcie_analog_of_match[] = {
+	{
+		.compatible = "amlogic,axg-mipi-pcie-analog-phy",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_axg_mipi_pcie_analog_of_match);
+
+static struct platform_driver phy_axg_mipi_pcie_analog_driver = {
+	.probe = phy_axg_mipi_pcie_analog_probe,
+	.driver = {
+		.name = "phy-axg-mipi-pcie-analog",
+		.of_match_table = phy_axg_mipi_pcie_analog_of_match,
+	},
+};
+module_platform_driver(phy_axg_mipi_pcie_analog_driver);
+
+MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>");
+MODULE_DESCRIPTION("Amlogic AXG MIPI + PCIE analog PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c
new file mode 100644
index 000000000..136687646
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic AXG PCIE PHY driver
+ *
+ * Copyright (C) 2020 Remi Pommarel <repk@triplefau.lt>
+ */
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+#include <linux/bitfield.h>
+#include <dt-bindings/phy/phy.h>
+
+#define MESON_PCIE_REG0 0x00
+#define		MESON_PCIE_COMMON_CLK	BIT(4)
+#define		MESON_PCIE_PORT_SEL	GENMASK(3, 2)
+#define		MESON_PCIE_CLK		BIT(1)
+#define		MESON_PCIE_POWERDOWN	BIT(0)
+
+#define MESON_PCIE_TWO_X1		FIELD_PREP(MESON_PCIE_PORT_SEL, 0x3)
+#define MESON_PCIE_COMMON_REF_CLK	FIELD_PREP(MESON_PCIE_COMMON_CLK, 0x1)
+#define MESON_PCIE_PHY_INIT		(MESON_PCIE_TWO_X1 |		\
+					 MESON_PCIE_COMMON_REF_CLK)
+#define MESON_PCIE_RESET_DELAY		500
+
+struct phy_axg_pcie_priv {
+	struct phy *phy;
+	struct phy *analog;
+	struct regmap *regmap;
+	struct reset_control *reset;
+};
+
+static const struct regmap_config phy_axg_pcie_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = MESON_PCIE_REG0,
+};
+
+static int phy_axg_pcie_power_on(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_power_on(priv->analog);
+	if (ret != 0)
+		return ret;
+
+	regmap_update_bits(priv->regmap, MESON_PCIE_REG0,
+			   MESON_PCIE_POWERDOWN, 0);
+	return 0;
+}
+
+static int phy_axg_pcie_power_off(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_power_off(priv->analog);
+	if (ret != 0)
+		return ret;
+
+	regmap_update_bits(priv->regmap, MESON_PCIE_REG0,
+			   MESON_PCIE_POWERDOWN, 1);
+	return 0;
+}
+
+static int phy_axg_pcie_init(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_init(priv->analog);
+	if (ret != 0)
+		return ret;
+
+	regmap_write(priv->regmap, MESON_PCIE_REG0, MESON_PCIE_PHY_INIT);
+	return reset_control_reset(priv->reset);
+}
+
+static int phy_axg_pcie_exit(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_exit(priv->analog);
+	if (ret != 0)
+		return ret;
+
+	return reset_control_reset(priv->reset);
+}
+
+static int phy_axg_pcie_reset(struct phy *phy)
+{
+	struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret = 0;
+
+	ret = phy_reset(priv->analog);
+	if (ret != 0)
+		goto out;
+
+	ret = reset_control_assert(priv->reset);
+	if (ret != 0)
+		goto out;
+	udelay(MESON_PCIE_RESET_DELAY);
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret != 0)
+		goto out;
+	udelay(MESON_PCIE_RESET_DELAY);
+
+out:
+	return ret;
+}
+
+static const struct phy_ops phy_axg_pcie_ops = {
+	.init = phy_axg_pcie_init,
+	.exit = phy_axg_pcie_exit,
+	.power_on = phy_axg_pcie_power_on,
+	.power_off = phy_axg_pcie_power_off,
+	.reset = phy_axg_pcie_reset,
+	.owner = THIS_MODULE,
+};
+
+static int phy_axg_pcie_probe(struct platform_device *pdev)
+{
+	struct phy_provider *pphy;
+	struct device *dev = &pdev->dev;
+	struct phy_axg_pcie_priv *priv;
+	struct device_node *np = dev->of_node;
+	void __iomem *base;
+
+	priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_axg_pcie_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->reset = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	priv->analog = devm_phy_get(dev, "analog");
+	if (IS_ERR(priv->analog))
+		return PTR_ERR(priv->analog);
+
+	priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops);
+	if (IS_ERR(priv->phy))
+		return dev_err_probe(dev, PTR_ERR(priv->phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+	pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(pphy);
+}
+
+static const struct of_device_id phy_axg_pcie_of_match[] = {
+	{
+		.compatible = "amlogic,axg-pcie-phy",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_axg_pcie_of_match);
+
+static struct platform_driver phy_axg_pcie_driver = {
+	.probe = phy_axg_pcie_probe,
+	.driver = {
+		.name = "phy-axg-pcie",
+		.of_match_table = phy_axg_pcie_of_match,
+	},
+};
+module_platform_driver(phy_axg_pcie_driver);
+
+MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>");
+MODULE_DESCRIPTION("Amlogic AXG PCIE PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
new file mode 100644
index 000000000..46e5f7e7e
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Meson G12A MIPI DSI Analog PHY
+ *
+ * Copyright (C) 2018 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2022 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#define HHI_MIPI_CNTL0 0x00
+#define		HHI_MIPI_CNTL0_DIF_REF_CTL1	GENMASK(31, 16)
+#define		HHI_MIPI_CNTL0_DIF_REF_CTL0	GENMASK(15, 0)
+
+#define HHI_MIPI_CNTL1 0x04
+#define		HHI_MIPI_CNTL1_BANDGAP		BIT(16)
+#define		HHI_MIPI_CNTL2_DIF_REF_CTL2	GENMASK(15, 0)
+
+#define HHI_MIPI_CNTL2 0x08
+#define		HHI_MIPI_CNTL2_DIF_TX_CTL1	GENMASK(31, 16)
+#define		HHI_MIPI_CNTL2_CH_EN		GENMASK(15, 11)
+#define		HHI_MIPI_CNTL2_DIF_TX_CTL0	GENMASK(10, 0)
+
+#define DSI_LANE_0				BIT(4)
+#define DSI_LANE_1				BIT(3)
+#define DSI_LANE_CLK				BIT(2)
+#define DSI_LANE_2				BIT(1)
+#define DSI_LANE_3				BIT(0)
+
+struct phy_g12a_mipi_dphy_analog_priv {
+	struct phy *phy;
+	struct regmap *regmap;
+	struct phy_configure_opts_mipi_dphy config;
+};
+
+static int phy_g12a_mipi_dphy_analog_configure(struct phy *phy,
+					       union phy_configure_opts *opts)
+{
+	struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
+	if (ret)
+		return ret;
+
+	memcpy(&priv->config, opts, sizeof(priv->config));
+
+	return 0;
+}
+
+static int phy_g12a_mipi_dphy_analog_power_on(struct phy *phy)
+{
+	struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
+	unsigned int reg;
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL0,
+		     FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8) |
+		     FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0xa487));
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL1,
+		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_REF_CTL2, 0x2e) |
+		     HHI_MIPI_CNTL1_BANDGAP);
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL2,
+		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL0, 0x45a) |
+		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL1, 0x2680));
+
+	reg = DSI_LANE_CLK;
+	switch (priv->config.lanes) {
+	case 4:
+		reg |= DSI_LANE_3;
+		fallthrough;
+	case 3:
+		reg |= DSI_LANE_2;
+		fallthrough;
+	case 2:
+		reg |= DSI_LANE_1;
+		fallthrough;
+	case 1:
+		reg |= DSI_LANE_0;
+		break;
+	default:
+		reg = 0;
+	}
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2,
+			   HHI_MIPI_CNTL2_CH_EN,
+			   FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg));
+
+	return 0;
+}
+
+static int phy_g12a_mipi_dphy_analog_power_off(struct phy *phy)
+{
+	struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL0, 0);
+	regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0);
+	regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0);
+
+	return 0;
+}
+
+static const struct phy_ops phy_g12a_mipi_dphy_analog_ops = {
+	.configure = phy_g12a_mipi_dphy_analog_configure,
+	.power_on = phy_g12a_mipi_dphy_analog_power_on,
+	.power_off = phy_g12a_mipi_dphy_analog_power_off,
+	.owner = THIS_MODULE,
+};
+
+static int phy_g12a_mipi_dphy_analog_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy;
+	struct device *dev = &pdev->dev;
+	struct phy_g12a_mipi_dphy_analog_priv *priv;
+	struct device_node *np = dev->of_node, *parent_np;
+	struct regmap *map;
+
+	priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Get the hhi system controller node */
+	parent_np = of_get_parent(np);
+	map = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
+	if (IS_ERR(map))
+		return dev_err_probe(dev, PTR_ERR(map), "failed to get HHI regmap\n");
+
+	priv->regmap = map;
+
+	priv->phy = devm_phy_create(dev, np, &phy_g12a_mipi_dphy_analog_ops);
+	if (IS_ERR(priv->phy))
+		return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n");
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+
+	phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy);
+}
+
+static const struct of_device_id phy_g12a_mipi_dphy_analog_of_match[] = {
+	{
+		.compatible = "amlogic,g12a-mipi-dphy-analog",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, phy_g12a_mipi_dphy_analog_of_match);
+
+static struct platform_driver phy_g12a_mipi_dphy_analog_driver = {
+	.probe = phy_g12a_mipi_dphy_analog_probe,
+	.driver = {
+		.name = "phy-meson-g12a-mipi-dphy-analog",
+		.of_match_table = phy_g12a_mipi_dphy_analog_of_match,
+	},
+};
+module_platform_driver(phy_g12a_mipi_dphy_analog_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Meson G12A MIPI Analog D-PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
new file mode 100644
index 000000000..66bf0b7ef
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Meson G12A USB2 PHY driver
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PHY_CTRL_R0						0x0
+#define PHY_CTRL_R1						0x4
+#define PHY_CTRL_R2						0x8
+#define PHY_CTRL_R3						0xc
+	#define PHY_CTRL_R3_SQUELCH_REF				GENMASK(1, 0)
+	#define PHY_CTRL_R3_HSDIC_REF				GENMASK(3, 2)
+	#define PHY_CTRL_R3_DISC_THRESH				GENMASK(7, 4)
+
+#define PHY_CTRL_R4						0x10
+	#define PHY_CTRL_R4_CALIB_CODE_7_0			GENMASK(7, 0)
+	#define PHY_CTRL_R4_CALIB_CODE_15_8			GENMASK(15, 8)
+	#define PHY_CTRL_R4_CALIB_CODE_23_16			GENMASK(23, 16)
+	#define PHY_CTRL_R4_I_C2L_CAL_EN			BIT(24)
+	#define PHY_CTRL_R4_I_C2L_CAL_RESET_N			BIT(25)
+	#define PHY_CTRL_R4_I_C2L_CAL_DONE			BIT(26)
+	#define PHY_CTRL_R4_TEST_BYPASS_MODE_EN			BIT(27)
+	#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0			GENMASK(29, 28)
+	#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2			GENMASK(31, 30)
+
+#define PHY_CTRL_R5						0x14
+#define PHY_CTRL_R6						0x18
+#define PHY_CTRL_R7						0x1c
+#define PHY_CTRL_R8						0x20
+#define PHY_CTRL_R9						0x24
+#define PHY_CTRL_R10						0x28
+#define PHY_CTRL_R11						0x2c
+#define PHY_CTRL_R12						0x30
+#define PHY_CTRL_R13						0x34
+	#define PHY_CTRL_R13_CUSTOM_PATTERN_19			GENMASK(7, 0)
+	#define PHY_CTRL_R13_LOAD_STAT				BIT(14)
+	#define PHY_CTRL_R13_UPDATE_PMA_SIGNALS			BIT(15)
+	#define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET		GENMASK(20, 16)
+	#define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT		BIT(21)
+	#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL		BIT(22)
+	#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN		BIT(23)
+	#define PHY_CTRL_R13_I_C2L_HS_EN			BIT(24)
+	#define PHY_CTRL_R13_I_C2L_FS_EN			BIT(25)
+	#define PHY_CTRL_R13_I_C2L_LS_EN			BIT(26)
+	#define PHY_CTRL_R13_I_C2L_HS_OE			BIT(27)
+	#define PHY_CTRL_R13_I_C2L_FS_OE			BIT(28)
+	#define PHY_CTRL_R13_I_C2L_HS_RX_EN			BIT(29)
+	#define PHY_CTRL_R13_I_C2L_FSLS_RX_EN			BIT(30)
+
+#define PHY_CTRL_R14						0x38
+	#define PHY_CTRL_R14_I_RDP_EN				BIT(0)
+	#define PHY_CTRL_R14_I_RPU_SW1_EN			BIT(1)
+	#define PHY_CTRL_R14_I_RPU_SW2_EN			GENMASK(3, 2)
+	#define PHY_CTRL_R14_PG_RSTN				BIT(4)
+	#define PHY_CTRL_R14_I_C2L_DATA_16_8			BIT(5)
+	#define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO	BIT(6)
+	#define PHY_CTRL_R14_BYPASS_CTRL_7_0			GENMASK(15, 8)
+	#define PHY_CTRL_R14_BYPASS_CTRL_15_8			GENMASK(23, 16)
+
+#define PHY_CTRL_R15						0x3c
+#define PHY_CTRL_R16						0x40
+	#define PHY_CTRL_R16_MPLL_M				GENMASK(8, 0)
+	#define PHY_CTRL_R16_MPLL_N				GENMASK(14, 10)
+	#define PHY_CTRL_R16_MPLL_TDC_MODE			BIT(20)
+	#define PHY_CTRL_R16_MPLL_SDM_EN			BIT(21)
+	#define PHY_CTRL_R16_MPLL_LOAD				BIT(22)
+	#define PHY_CTRL_R16_MPLL_DCO_SDM_EN			BIT(23)
+	#define PHY_CTRL_R16_MPLL_LOCK_LONG			GENMASK(25, 24)
+	#define PHY_CTRL_R16_MPLL_LOCK_F			BIT(26)
+	#define PHY_CTRL_R16_MPLL_FAST_LOCK			BIT(27)
+	#define PHY_CTRL_R16_MPLL_EN				BIT(28)
+	#define PHY_CTRL_R16_MPLL_RESET				BIT(29)
+	#define PHY_CTRL_R16_MPLL_LOCK				BIT(30)
+	#define PHY_CTRL_R16_MPLL_LOCK_DIG			BIT(31)
+
+#define PHY_CTRL_R17						0x44
+	#define PHY_CTRL_R17_MPLL_FRAC_IN			GENMASK(13, 0)
+	#define PHY_CTRL_R17_MPLL_FIX_EN			BIT(16)
+	#define PHY_CTRL_R17_MPLL_LAMBDA1			GENMASK(19, 17)
+	#define PHY_CTRL_R17_MPLL_LAMBDA0			GENMASK(22, 20)
+	#define PHY_CTRL_R17_MPLL_FILTER_MODE			BIT(23)
+	#define PHY_CTRL_R17_MPLL_FILTER_PVT2			GENMASK(27, 24)
+	#define PHY_CTRL_R17_MPLL_FILTER_PVT1			GENMASK(31, 28)
+
+#define PHY_CTRL_R18						0x48
+	#define PHY_CTRL_R18_MPLL_LKW_SEL			GENMASK(1, 0)
+	#define PHY_CTRL_R18_MPLL_LK_W				GENMASK(5, 2)
+	#define PHY_CTRL_R18_MPLL_LK_S				GENMASK(11, 6)
+	#define PHY_CTRL_R18_MPLL_DCO_M_EN			BIT(12)
+	#define PHY_CTRL_R18_MPLL_DCO_CLK_SEL			BIT(13)
+	#define PHY_CTRL_R18_MPLL_PFD_GAIN			GENMASK(15, 14)
+	#define PHY_CTRL_R18_MPLL_ROU				GENMASK(18, 16)
+	#define PHY_CTRL_R18_MPLL_DATA_SEL			GENMASK(21, 19)
+	#define PHY_CTRL_R18_MPLL_BIAS_ADJ			GENMASK(23, 22)
+	#define PHY_CTRL_R18_MPLL_BB_MODE			GENMASK(25, 24)
+	#define PHY_CTRL_R18_MPLL_ALPHA				GENMASK(28, 26)
+	#define PHY_CTRL_R18_MPLL_ADJ_LDO			GENMASK(30, 29)
+	#define PHY_CTRL_R18_MPLL_ACG_RANGE			BIT(31)
+
+#define PHY_CTRL_R19						0x4c
+#define PHY_CTRL_R20						0x50
+	#define PHY_CTRL_R20_USB2_IDDET_EN			BIT(0)
+	#define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0		GENMASK(3, 1)
+	#define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN		BIT(4)
+	#define PHY_CTRL_R20_USB2_AMON_EN			BIT(5)
+	#define PHY_CTRL_R20_USB2_CAL_CODE_R5			BIT(6)
+	#define PHY_CTRL_R20_BYPASS_OTG_DET			BIT(7)
+	#define PHY_CTRL_R20_USB2_DMON_EN			BIT(8)
+	#define PHY_CTRL_R20_USB2_DMON_SEL_3_0			GENMASK(12, 9)
+	#define PHY_CTRL_R20_USB2_EDGE_DRV_EN			BIT(13)
+	#define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0		GENMASK(15, 14)
+	#define PHY_CTRL_R20_USB2_BGR_ADJ_4_0			GENMASK(20, 16)
+	#define PHY_CTRL_R20_USB2_BGR_START			BIT(21)
+	#define PHY_CTRL_R20_USB2_BGR_VREF_4_0			GENMASK(28, 24)
+	#define PHY_CTRL_R20_USB2_BGR_DBG_1_0			GENMASK(30, 29)
+	#define PHY_CTRL_R20_BYPASS_CAL_DONE_R5			BIT(31)
+
+#define PHY_CTRL_R21						0x54
+	#define PHY_CTRL_R21_USB2_BGR_FORCE			BIT(0)
+	#define PHY_CTRL_R21_USB2_CAL_ACK_EN			BIT(1)
+	#define PHY_CTRL_R21_USB2_OTG_ACA_EN			BIT(2)
+	#define PHY_CTRL_R21_USB2_TX_STRG_PD			BIT(3)
+	#define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0		GENMASK(5, 4)
+	#define PHY_CTRL_R21_BYPASS_UTMI_CNTR			GENMASK(15, 6)
+	#define PHY_CTRL_R21_BYPASS_UTMI_REG			GENMASK(25, 20)
+
+#define PHY_CTRL_R22						0x58
+#define PHY_CTRL_R23						0x5c
+
+#define RESET_COMPLETE_TIME					1000
+#define PLL_RESET_COMPLETE_TIME					100
+
+enum meson_soc_id {
+	MESON_SOC_G12A  = 0,
+	MESON_SOC_A1,
+};
+
+struct phy_meson_g12a_usb2_priv {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct clk		*clk;
+	struct reset_control	*reset;
+	int                     soc_id;
+};
+
+static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PHY_CTRL_R23,
+};
+
+static int phy_meson_g12a_usb2_init(struct phy *phy)
+{
+	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+	unsigned int value;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret) {
+		clk_disable_unprepare(priv->clk);
+		return ret;
+	}
+
+	udelay(RESET_COMPLETE_TIME);
+
+	/* usb2_otg_aca_en == 0 */
+	regmap_update_bits(priv->regmap, PHY_CTRL_R21,
+			   PHY_CTRL_R21_USB2_OTG_ACA_EN, 0);
+
+	/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
+	regmap_write(priv->regmap, PHY_CTRL_R16,
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
+		     PHY_CTRL_R16_MPLL_LOAD |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
+		     PHY_CTRL_R16_MPLL_FAST_LOCK |
+		     PHY_CTRL_R16_MPLL_EN |
+		     PHY_CTRL_R16_MPLL_RESET);
+
+	regmap_write(priv->regmap, PHY_CTRL_R17,
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN, 0) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1, 7) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0, 7) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
+
+	value = FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
+		PHY_CTRL_R18_MPLL_ACG_RANGE;
+
+	if (priv->soc_id == MESON_SOC_A1)
+		value |= PHY_CTRL_R18_MPLL_DCO_CLK_SEL;
+
+	regmap_write(priv->regmap, PHY_CTRL_R18, value);
+
+	udelay(PLL_RESET_COMPLETE_TIME);
+
+	/* UnReset PLL */
+	regmap_write(priv->regmap, PHY_CTRL_R16,
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
+		     PHY_CTRL_R16_MPLL_LOAD |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
+		     PHY_CTRL_R16_MPLL_FAST_LOCK |
+		     PHY_CTRL_R16_MPLL_EN);
+
+	/* PHY Tuning */
+	regmap_write(priv->regmap, PHY_CTRL_R20,
+		     FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0, 4) |
+		     PHY_CTRL_R20_USB2_OTG_VBUSDET_EN |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0, 15) |
+		     PHY_CTRL_R20_USB2_EDGE_DRV_EN |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0, 3) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0, 0) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
+
+	if (priv->soc_id == MESON_SOC_G12A)
+		regmap_write(priv->regmap, PHY_CTRL_R4,
+			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
+			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
+			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
+			     PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
+			     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
+			     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+	else if (priv->soc_id == MESON_SOC_A1) {
+		regmap_write(priv->regmap, PHY_CTRL_R21,
+			     PHY_CTRL_R21_USB2_CAL_ACK_EN |
+			     PHY_CTRL_R21_USB2_TX_STRG_PD |
+			     FIELD_PREP(PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0, 2));
+
+		/* Analog Settings */
+		regmap_write(priv->regmap, PHY_CTRL_R13,
+			     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+	}
+
+	/* Tuning Disconnect Threshold */
+	regmap_write(priv->regmap, PHY_CTRL_R3,
+		     FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF, 0) |
+		     FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) |
+		     FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
+
+	if (priv->soc_id == MESON_SOC_G12A) {
+		/* Analog Settings */
+		regmap_write(priv->regmap, PHY_CTRL_R14, 0);
+		regmap_write(priv->regmap, PHY_CTRL_R13,
+			     PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
+			     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+	}
+
+	return 0;
+}
+
+static int phy_meson_g12a_usb2_exit(struct phy *phy)
+{
+	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (!ret)
+		clk_disable_unprepare(priv->clk);
+
+	return ret;
+}
+
+/* set_mode is not needed, mode setting is handled via the UTMI bus */
+static const struct phy_ops phy_meson_g12a_usb2_ops = {
+	.init		= phy_meson_g12a_usb2_init,
+	.exit		= phy_meson_g12a_usb2_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct phy_meson_g12a_usb2_priv *priv;
+	struct phy *phy;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->soc_id = (uintptr_t)of_device_get_match_data(&pdev->dev);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_meson_g12a_usb2_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->clk = devm_clk_get(dev, "xtal");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->reset = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return ret;
+
+	phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(dev, PTR_ERR(phy),
+				     "failed to create PHY\n");
+
+	phy_set_bus_width(phy, 8);
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_g12a_usb2_of_match[] = {
+	{
+		.compatible = "amlogic,g12a-usb2-phy",
+		.data = (void *)MESON_SOC_G12A,
+	},
+	{
+		.compatible = "amlogic,a1-usb2-phy",
+		.data = (void *)MESON_SOC_A1,
+	},
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match);
+
+static struct platform_driver phy_meson_g12a_usb2_driver = {
+	.probe	= phy_meson_g12a_usb2_probe,
+	.driver	= {
+		.name		= "phy-meson-g12a-usb2",
+		.of_match_table	= phy_meson_g12a_usb2_of_match,
+	},
+};
+module_platform_driver(phy_meson_g12a_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Meson G12A USB2 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
new file mode 100644
index 000000000..5468831d6
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic G12A USB3 + PCIE Combo PHY driver
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#define PHY_R0							0x00
+	#define PHY_R0_PCIE_POWER_STATE				GENMASK(4, 0)
+	#define PHY_R0_PCIE_USB3_SWITCH				GENMASK(6, 5)
+
+#define PHY_R1							0x04
+	#define PHY_R1_PHY_TX1_TERM_OFFSET			GENMASK(4, 0)
+	#define PHY_R1_PHY_TX0_TERM_OFFSET			GENMASK(9, 5)
+	#define PHY_R1_PHY_RX1_EQ				GENMASK(12, 10)
+	#define PHY_R1_PHY_RX0_EQ				GENMASK(15, 13)
+	#define PHY_R1_PHY_LOS_LEVEL				GENMASK(20, 16)
+	#define PHY_R1_PHY_LOS_BIAS				GENMASK(23, 21)
+	#define PHY_R1_PHY_REF_CLKDIV2				BIT(24)
+	#define PHY_R1_PHY_MPLL_MULTIPLIER			GENMASK(31, 25)
+
+#define PHY_R2							0x08
+	#define PHY_R2_PCS_TX_DEEMPH_GEN2_6DB			GENMASK(5, 0)
+	#define PHY_R2_PCS_TX_DEEMPH_GEN2_3P5DB			GENMASK(11, 6)
+	#define PHY_R2_PCS_TX_DEEMPH_GEN1			GENMASK(17, 12)
+	#define PHY_R2_PHY_TX_VBOOST_LVL			GENMASK(20, 18)
+
+#define PHY_R4							0x10
+	#define PHY_R4_PHY_CR_WRITE				BIT(0)
+	#define PHY_R4_PHY_CR_READ				BIT(1)
+	#define PHY_R4_PHY_CR_DATA_IN				GENMASK(17, 2)
+	#define PHY_R4_PHY_CR_CAP_DATA				BIT(18)
+	#define PHY_R4_PHY_CR_CAP_ADDR				BIT(19)
+
+#define PHY_R5							0x14
+	#define PHY_R5_PHY_CR_DATA_OUT				GENMASK(15, 0)
+	#define PHY_R5_PHY_CR_ACK				BIT(16)
+	#define PHY_R5_PHY_BS_OUT				BIT(17)
+
+#define PCIE_RESET_DELAY					500
+
+struct phy_g12a_usb3_pcie_priv {
+	struct regmap		*regmap;
+	struct regmap		*regmap_cr;
+	struct clk		*clk_ref;
+	struct reset_control	*reset;
+	struct phy		*phy;
+	unsigned int		mode;
+};
+
+static const struct regmap_config phy_g12a_usb3_pcie_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PHY_R5,
+};
+
+static int phy_g12a_usb3_pcie_cr_bus_addr(struct phy_g12a_usb3_pcie_priv *priv,
+					  unsigned int addr)
+{
+	unsigned int val, reg;
+	int ret;
+
+	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, addr);
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_ADDR);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       !(val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_cr_bus_read(void *context, unsigned int addr,
+					  unsigned int *data)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = context;
+	unsigned int val;
+	int ret;
+
+	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, 0);
+	regmap_write(priv->regmap, PHY_R4, PHY_R4_PHY_CR_READ);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	*data = FIELD_GET(PHY_R5_PHY_CR_DATA_OUT, val);
+
+	regmap_write(priv->regmap, PHY_R4, 0);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       !(val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_cr_bus_write(void *context, unsigned int addr,
+					   unsigned int data)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = context;
+	unsigned int val, reg;
+	int ret;
+
+	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
+	if (ret)
+		return ret;
+
+	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, data);
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_DATA);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK) == 0,
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_WRITE);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK) == 0,
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
+	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
+	.max_register = 0xffff,
+	.disable_locking = true,
+};
+
+static int phy_g12a_usb3_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+	int data, ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	/* Switch PHY to USB3 */
+	/* TODO figure out how to handle when PCIe was set in the bootloader */
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_USB3_SWITCH,
+			   PHY_R0_PCIE_USB3_SWITCH);
+
+	/*
+	 * WORKAROUND: There is SSPHY suspend bug due to
+	 * which USB enumerates
+	 * in HS mode instead of SS mode. Workaround it by asserting
+	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus
+	 * mode
+	 */
+	ret = regmap_update_bits(priv->regmap_cr, 0x102d, BIT(7), BIT(7));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap_cr, 0x1010, 0xff0, 20);
+	if (ret)
+		return ret;
+
+	/*
+	 * Fix RX Equalization setting as follows
+	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
+	 */
+	ret = regmap_read(priv->regmap_cr, 0x1006, &data);
+	if (ret)
+		return ret;
+
+	data &= ~BIT(6);
+	data |= BIT(7);
+	data &= ~(0x7 << 8);
+	data |= (0x3 << 8);
+	data |= (1 << 11);
+	ret = regmap_write(priv->regmap_cr, 0x1006, data);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set EQ and TX launch amplitudes as follows
+	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
+	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
+	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
+	 */
+	ret = regmap_read(priv->regmap_cr, 0x1002, &data);
+	if (ret)
+		return ret;
+
+	data &= ~0x3f80;
+	data |= (0x16 << 7);
+	data &= ~0x7f;
+	data |= (0x7f | BIT(14));
+	ret = regmap_write(priv->regmap_cr, 0x1002, data);
+	if (ret)
+		return ret;
+
+	/* MPLL_LOOP_CTL.PROP_CNTRL = 8 */
+	ret = regmap_update_bits(priv->regmap_cr, 0x30, 0xf << 4, 8 << 4);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->regmap, PHY_R2,
+			PHY_R2_PHY_TX_VBOOST_LVL,
+			FIELD_PREP(PHY_R2_PHY_TX_VBOOST_LVL, 0x4));
+
+	regmap_update_bits(priv->regmap, PHY_R1,
+			PHY_R1_PHY_LOS_BIAS | PHY_R1_PHY_LOS_LEVEL,
+			FIELD_PREP(PHY_R1_PHY_LOS_BIAS, 4) |
+			FIELD_PREP(PHY_R1_PHY_LOS_LEVEL, 9));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_power_on(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_POWER_STATE,
+			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_power_off(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_POWER_STATE,
+			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1d));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_reset(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	ret = reset_control_assert(priv->reset);
+	if (ret)
+		return ret;
+
+	udelay(PCIE_RESET_DELAY);
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return ret;
+
+	udelay(PCIE_RESET_DELAY);
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return phy_g12a_usb3_init(phy);
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_exit(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return reset_control_reset(priv->reset);
+
+	return 0;
+}
+
+static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
+					    const struct of_phandle_args *args)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = dev_get_drvdata(dev);
+	unsigned int mode;
+
+	if (args->args_count < 1) {
+		dev_err(dev, "invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	mode = args->args[0];
+
+	if (mode != PHY_TYPE_USB3 && mode != PHY_TYPE_PCIE) {
+		dev_err(dev, "invalid phy mode select argument\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	priv->mode = mode;
+
+	return priv->phy;
+}
+
+static const struct phy_ops phy_g12a_usb3_pcie_ops = {
+	.init		= phy_g12a_usb3_pcie_init,
+	.exit		= phy_g12a_usb3_pcie_exit,
+	.power_on	= phy_g12a_usb3_pcie_power_on,
+	.power_off	= phy_g12a_usb3_pcie_power_off,
+	.reset		= phy_g12a_usb3_pcie_reset,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_g12a_usb3_pcie_priv *priv;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_g12a_usb3_pcie_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->regmap_cr = devm_regmap_init(dev, NULL, priv,
+					   &phy_g12a_usb3_pcie_cr_regmap_conf);
+	if (IS_ERR(priv->regmap_cr))
+		return PTR_ERR(priv->regmap_cr);
+
+	priv->clk_ref = devm_clk_get_enabled(dev, "ref_clk");
+	if (IS_ERR(priv->clk_ref))
+		return PTR_ERR(priv->clk_ref);
+
+	priv->reset = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops);
+	if (IS_ERR(priv->phy))
+		return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n");
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+						     phy_g12a_usb3_pcie_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_g12a_usb3_pcie_of_match[] = {
+	{ .compatible = "amlogic,g12a-usb3-pcie-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_g12a_usb3_pcie_of_match);
+
+static struct platform_driver phy_g12a_usb3_pcie_driver = {
+	.probe	= phy_g12a_usb3_pcie_probe,
+	.driver	= {
+		.name		= "phy-g12a-usb3-pcie",
+		.of_match_table	= phy_g12a_usb3_pcie_of_match,
+	},
+};
+module_platform_driver(phy_g12a_usb3_pcie_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic G12A USB3 + PCIE Combo PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
new file mode 100644
index 000000000..f6bc0ca24
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Meson GXL and GXM USB2 PHY driver
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* bits [31:27] are read-only */
+#define U2P_R0							0x0
+	#define U2P_R0_BYPASS_SEL				BIT(0)
+	#define U2P_R0_BYPASS_DM_EN				BIT(1)
+	#define U2P_R0_BYPASS_DP_EN				BIT(2)
+	#define U2P_R0_TXBITSTUFF_ENH				BIT(3)
+	#define U2P_R0_TXBITSTUFF_EN				BIT(4)
+	#define U2P_R0_DM_PULLDOWN				BIT(5)
+	#define U2P_R0_DP_PULLDOWN				BIT(6)
+	#define U2P_R0_DP_VBUS_VLD_EXT_SEL			BIT(7)
+	#define U2P_R0_DP_VBUS_VLD_EXT				BIT(8)
+	#define U2P_R0_ADP_PRB_EN				BIT(9)
+	#define U2P_R0_ADP_DISCHARGE				BIT(10)
+	#define U2P_R0_ADP_CHARGE				BIT(11)
+	#define U2P_R0_DRV_VBUS					BIT(12)
+	#define U2P_R0_ID_PULLUP				BIT(13)
+	#define U2P_R0_LOOPBACK_EN_B				BIT(14)
+	#define U2P_R0_OTG_DISABLE				BIT(15)
+	#define U2P_R0_COMMON_ONN				BIT(16)
+	#define U2P_R0_FSEL_MASK				GENMASK(19, 17)
+	#define U2P_R0_REF_CLK_SEL_MASK				GENMASK(21, 20)
+	#define U2P_R0_POWER_ON_RESET				BIT(22)
+	#define U2P_R0_V_ATE_TEST_EN_B_MASK			GENMASK(24, 23)
+	#define U2P_R0_ID_SET_ID_DQ				BIT(25)
+	#define U2P_R0_ATE_RESET				BIT(26)
+	#define U2P_R0_FSV_MINUS				BIT(27)
+	#define U2P_R0_FSV_PLUS					BIT(28)
+	#define U2P_R0_BYPASS_DM_DATA				BIT(29)
+	#define U2P_R0_BYPASS_DP_DATA				BIT(30)
+
+#define U2P_R1							0x4
+	#define U2P_R1_BURN_IN_TEST				BIT(0)
+	#define U2P_R1_ACA_ENABLE				BIT(1)
+	#define U2P_R1_DCD_ENABLE				BIT(2)
+	#define U2P_R1_VDAT_SRC_EN_B				BIT(3)
+	#define U2P_R1_VDAT_DET_EN_B				BIT(4)
+	#define U2P_R1_CHARGES_SEL				BIT(5)
+	#define U2P_R1_TX_PREEMP_PULSE_TUNE			BIT(6)
+	#define U2P_R1_TX_PREEMP_AMP_TUNE_MASK			GENMASK(8, 7)
+	#define U2P_R1_TX_RES_TUNE_MASK				GENMASK(10, 9)
+	#define U2P_R1_TX_RISE_TUNE_MASK			GENMASK(12, 11)
+	#define U2P_R1_TX_VREF_TUNE_MASK			GENMASK(16, 13)
+	#define U2P_R1_TX_FSLS_TUNE_MASK			GENMASK(20, 17)
+	#define U2P_R1_TX_HSXV_TUNE_MASK			GENMASK(22, 21)
+	#define U2P_R1_OTG_TUNE_MASK				GENMASK(25, 23)
+	#define U2P_R1_SQRX_TUNE_MASK				GENMASK(28, 26)
+	#define U2P_R1_COMP_DIS_TUNE_MASK			GENMASK(31, 29)
+
+/* bits [31:14] are read-only */
+#define U2P_R2							0x8
+	#define U2P_R2_TESTDATA_IN_MASK				GENMASK(7, 0)
+	#define U2P_R2_TESTADDR_MASK				GENMASK(11, 8)
+	#define U2P_R2_TESTDATA_OUT_SEL				BIT(12)
+	#define U2P_R2_TESTCLK					BIT(13)
+	#define U2P_R2_TESTDATA_OUT_MASK			GENMASK(17, 14)
+	#define U2P_R2_ACA_PIN_RANGE_C				BIT(18)
+	#define U2P_R2_ACA_PIN_RANGE_B				BIT(19)
+	#define U2P_R2_ACA_PIN_RANGE_A				BIT(20)
+	#define U2P_R2_ACA_PIN_GND				BIT(21)
+	#define U2P_R2_ACA_PIN_FLOAT				BIT(22)
+	#define U2P_R2_CHARGE_DETECT				BIT(23)
+	#define U2P_R2_DEVICE_SESSION_VALID			BIT(24)
+	#define U2P_R2_ADP_PROBE				BIT(25)
+	#define U2P_R2_ADP_SENSE				BIT(26)
+	#define U2P_R2_SESSION_END				BIT(27)
+	#define U2P_R2_VBUS_VALID				BIT(28)
+	#define U2P_R2_B_VALID					BIT(29)
+	#define U2P_R2_A_VALID					BIT(30)
+	#define U2P_R2_ID_DIG					BIT(31)
+
+#define U2P_R3							0xc
+
+#define RESET_COMPLETE_TIME				500
+
+struct phy_meson_gxl_usb2_priv {
+	struct regmap		*regmap;
+	enum phy_mode		mode;
+	int			is_enabled;
+	struct clk		*clk;
+	struct reset_control	*reset;
+};
+
+static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = U2P_R3,
+};
+
+static int phy_meson_gxl_usb2_init(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		reset_control_rearm(priv->reset);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_exit(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(priv->clk);
+	reset_control_rearm(priv->reset);
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_reset(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->is_enabled) {
+		/* reset the PHY and wait until settings are stabilized */
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+				   U2P_R0_POWER_ON_RESET);
+		udelay(RESET_COMPLETE_TIME);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+				   0);
+		udelay(RESET_COMPLETE_TIME);
+	}
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
+				       enum phy_mode mode, int submode)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:
+	case PHY_MODE_USB_OTG:
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
+				   U2P_R0_DM_PULLDOWN);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
+				   U2P_R0_DP_PULLDOWN);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
+				   U2P_R0_ID_PULLUP);
+		break;
+
+	case PHY_MODE_USB_DEVICE:
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
+				   0);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
+				   0);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
+				   U2P_R0_ID_PULLUP);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	phy_meson_gxl_usb2_reset(phy);
+
+	priv->mode = mode;
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_power_off(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+	priv->is_enabled = 0;
+
+	/* power off the PHY by putting it into reset mode */
+	regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+			   U2P_R0_POWER_ON_RESET);
+
+	return 0;
+}
+
+static int phy_meson_gxl_usb2_power_on(struct phy *phy)
+{
+	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	priv->is_enabled = 1;
+
+	/* power on the PHY by taking it out of reset mode */
+	regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0);
+
+	ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode, 0);
+	if (ret) {
+		phy_meson_gxl_usb2_power_off(phy);
+
+		dev_err(&phy->dev, "Failed to initialize PHY with mode %d\n",
+			priv->mode);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct phy_ops phy_meson_gxl_usb2_ops = {
+	.init		= phy_meson_gxl_usb2_init,
+	.exit		= phy_meson_gxl_usb2_exit,
+	.power_on	= phy_meson_gxl_usb2_power_on,
+	.power_off	= phy_meson_gxl_usb2_power_off,
+	.set_mode	= phy_meson_gxl_usb2_set_mode,
+	.reset		= phy_meson_gxl_usb2_reset,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct phy_meson_gxl_usb2_priv *priv;
+	struct phy *phy;
+	void __iomem *base;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* start in host mode */
+	priv->mode = PHY_MODE_USB_HOST;
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_meson_gxl_usb2_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->clk = devm_clk_get_optional(dev, "phy");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(dev, PTR_ERR(phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_gxl_usb2_of_match[] = {
+	{ .compatible = "amlogic,meson-gxl-usb2-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb2_of_match);
+
+static struct platform_driver phy_meson_gxl_usb2_driver = {
+	.probe	= phy_meson_gxl_usb2_probe,
+	.driver	= {
+		.name		= "phy-meson-gxl-usb2",
+		.of_match_table	= phy_meson_gxl_usb2_of_match,
+	},
+};
+module_platform_driver(phy_meson_gxl_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Meson GXL and GXM USB2 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson8-hdmi-tx.c b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
new file mode 100644
index 000000000..2617f7f6c
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Meson8, Meson8b and Meson8m2 HDMI TX PHY.
+ *
+ * Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+/*
+ * Unfortunately there is no detailed documentation available for the
+ * HHI_HDMI_PHY_CNTL0 register. CTL0 and CTL1 is all we know about.
+ * Magic register values in the driver below are taken from the vendor
+ * BSP / kernel.
+ */
+#define HHI_HDMI_PHY_CNTL0				0x3a0
+	#define HHI_HDMI_PHY_CNTL0_HDMI_CTL1		GENMASK(31, 16)
+	#define HHI_HDMI_PHY_CNTL0_HDMI_CTL0		GENMASK(15, 0)
+
+#define HHI_HDMI_PHY_CNTL1				0x3a4
+	#define HHI_HDMI_PHY_CNTL1_CLOCK_ENABLE		BIT(1)
+	#define HHI_HDMI_PHY_CNTL1_SOFT_RESET		BIT(0)
+
+#define HHI_HDMI_PHY_CNTL2				0x3a8
+
+struct phy_meson8_hdmi_tx_priv {
+	struct regmap		*hhi;
+	struct clk		*tmds_clk;
+};
+
+static int phy_meson8_hdmi_tx_init(struct phy *phy)
+{
+	struct phy_meson8_hdmi_tx_priv *priv = phy_get_drvdata(phy);
+
+	return clk_prepare_enable(priv->tmds_clk);
+}
+
+static int phy_meson8_hdmi_tx_exit(struct phy *phy)
+{
+	struct phy_meson8_hdmi_tx_priv *priv = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(priv->tmds_clk);
+
+	return 0;
+}
+
+static int phy_meson8_hdmi_tx_power_on(struct phy *phy)
+{
+	struct phy_meson8_hdmi_tx_priv *priv = phy_get_drvdata(phy);
+	unsigned int i;
+	u16 hdmi_ctl0;
+
+	if (clk_get_rate(priv->tmds_clk) >= 2970UL * 1000 * 1000)
+		hdmi_ctl0 = 0x1e8b;
+	else
+		hdmi_ctl0 = 0x4d0b;
+
+	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0,
+		     FIELD_PREP(HHI_HDMI_PHY_CNTL0_HDMI_CTL1, 0x08c3) |
+		     FIELD_PREP(HHI_HDMI_PHY_CNTL0_HDMI_CTL0, hdmi_ctl0));
+
+	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1, 0x0);
+
+	/* Reset three times, just like the vendor driver does */
+	for (i = 0; i < 3; i++) {
+		regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1,
+			     HHI_HDMI_PHY_CNTL1_CLOCK_ENABLE |
+			     HHI_HDMI_PHY_CNTL1_SOFT_RESET);
+		usleep_range(1000, 2000);
+
+		regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1,
+			     HHI_HDMI_PHY_CNTL1_CLOCK_ENABLE);
+		usleep_range(1000, 2000);
+	}
+
+	return 0;
+}
+
+static int phy_meson8_hdmi_tx_power_off(struct phy *phy)
+{
+	struct phy_meson8_hdmi_tx_priv *priv = phy_get_drvdata(phy);
+
+	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0,
+		     FIELD_PREP(HHI_HDMI_PHY_CNTL0_HDMI_CTL1, 0x0841) |
+		     FIELD_PREP(HHI_HDMI_PHY_CNTL0_HDMI_CTL0, 0x8d00));
+
+	return 0;
+}
+
+static const struct phy_ops phy_meson8_hdmi_tx_ops = {
+	.init		= phy_meson8_hdmi_tx_init,
+	.exit		= phy_meson8_hdmi_tx_exit,
+	.power_on	= phy_meson8_hdmi_tx_power_on,
+	.power_off	= phy_meson8_hdmi_tx_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson8_hdmi_tx_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct phy_meson8_hdmi_tx_priv *priv;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	struct phy *phy;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->hhi = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(priv->hhi))
+		return PTR_ERR(priv->hhi);
+
+	priv->tmds_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->tmds_clk))
+		return PTR_ERR(priv->tmds_clk);
+
+	phy = devm_phy_create(&pdev->dev, np, &phy_meson8_hdmi_tx_ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(&pdev->dev,
+						     of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson8_hdmi_tx_of_match[] = {
+	{ .compatible = "amlogic,meson8-hdmi-tx-phy" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, phy_meson8_hdmi_tx_of_match);
+
+static struct platform_driver phy_meson8_hdmi_tx_driver = {
+	.probe	= phy_meson8_hdmi_tx_probe,
+	.driver	= {
+		.name		= "phy-meson8-hdmi-tx",
+		.of_match_table	= phy_meson8_hdmi_tx_of_match,
+	},
+};
+module_platform_driver(phy_meson8_hdmi_tx_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Meson8, Meson8b and Meson8m2 HDMI TX PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
new file mode 100644
index 000000000..71e5e281f
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Meson8, Meson8b and GXBB USB2 PHY driver
+ *
+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/of.h>
+
+#define REG_CONFIG					0x00
+	#define REG_CONFIG_CLK_EN			BIT(0)
+	#define REG_CONFIG_CLK_SEL_MASK			GENMASK(3, 1)
+	#define REG_CONFIG_CLK_DIV_MASK			GENMASK(10, 4)
+	#define REG_CONFIG_CLK_32k_ALTSEL		BIT(15)
+	#define REG_CONFIG_TEST_TRIG			BIT(31)
+
+#define REG_CTRL					0x04
+	#define REG_CTRL_SOFT_PRST			BIT(0)
+	#define REG_CTRL_SOFT_HRESET			BIT(1)
+	#define REG_CTRL_SS_SCALEDOWN_MODE_MASK		GENMASK(3, 2)
+	#define REG_CTRL_CLK_DET_RST			BIT(4)
+	#define REG_CTRL_INTR_SEL			BIT(5)
+	#define REG_CTRL_CLK_DETECTED			BIT(8)
+	#define REG_CTRL_SOF_SENT_RCVD_TGL		BIT(9)
+	#define REG_CTRL_SOF_TOGGLE_OUT			BIT(10)
+	#define REG_CTRL_POWER_ON_RESET			BIT(15)
+	#define REG_CTRL_SLEEPM				BIT(16)
+	#define REG_CTRL_TX_BITSTUFF_ENN_H		BIT(17)
+	#define REG_CTRL_TX_BITSTUFF_ENN		BIT(18)
+	#define REG_CTRL_COMMON_ON			BIT(19)
+	#define REG_CTRL_REF_CLK_SEL_MASK		GENMASK(21, 20)
+	#define REG_CTRL_FSEL_MASK			GENMASK(24, 22)
+	#define REG_CTRL_PORT_RESET			BIT(25)
+	#define REG_CTRL_THREAD_ID_MASK			GENMASK(31, 26)
+
+#define REG_ENDP_INTR					0x08
+
+/* bits [31:26], [24:21] and [15:3] seem to be read-only */
+#define REG_ADP_BC					0x0c
+	#define REG_ADP_BC_VBUS_VLD_EXT_SEL		BIT(0)
+	#define REG_ADP_BC_VBUS_VLD_EXT			BIT(1)
+	#define REG_ADP_BC_OTG_DISABLE			BIT(2)
+	#define REG_ADP_BC_ID_PULLUP			BIT(3)
+	#define REG_ADP_BC_DRV_VBUS			BIT(4)
+	#define REG_ADP_BC_ADP_PRB_EN			BIT(5)
+	#define REG_ADP_BC_ADP_DISCHARGE		BIT(6)
+	#define REG_ADP_BC_ADP_CHARGE			BIT(7)
+	#define REG_ADP_BC_SESS_END			BIT(8)
+	#define REG_ADP_BC_DEVICE_SESS_VLD		BIT(9)
+	#define REG_ADP_BC_B_VALID			BIT(10)
+	#define REG_ADP_BC_A_VALID			BIT(11)
+	#define REG_ADP_BC_ID_DIG			BIT(12)
+	#define REG_ADP_BC_VBUS_VALID			BIT(13)
+	#define REG_ADP_BC_ADP_PROBE			BIT(14)
+	#define REG_ADP_BC_ADP_SENSE			BIT(15)
+	#define REG_ADP_BC_ACA_ENABLE			BIT(16)
+	#define REG_ADP_BC_DCD_ENABLE			BIT(17)
+	#define REG_ADP_BC_VDAT_DET_EN_B		BIT(18)
+	#define REG_ADP_BC_VDAT_SRC_EN_B		BIT(19)
+	#define REG_ADP_BC_CHARGE_SEL			BIT(20)
+	#define REG_ADP_BC_CHARGE_DETECT		BIT(21)
+	#define REG_ADP_BC_ACA_PIN_RANGE_C		BIT(22)
+	#define REG_ADP_BC_ACA_PIN_RANGE_B		BIT(23)
+	#define REG_ADP_BC_ACA_PIN_RANGE_A		BIT(24)
+	#define REG_ADP_BC_ACA_PIN_GND			BIT(25)
+	#define REG_ADP_BC_ACA_PIN_FLOAT		BIT(26)
+
+#define REG_DBG_UART					0x10
+	#define REG_DBG_UART_BYPASS_SEL			BIT(0)
+	#define REG_DBG_UART_BYPASS_DM_EN		BIT(1)
+	#define REG_DBG_UART_BYPASS_DP_EN		BIT(2)
+	#define REG_DBG_UART_BYPASS_DM_DATA		BIT(3)
+	#define REG_DBG_UART_BYPASS_DP_DATA		BIT(4)
+	#define REG_DBG_UART_FSV_MINUS			BIT(5)
+	#define REG_DBG_UART_FSV_PLUS			BIT(6)
+	#define REG_DBG_UART_FSV_BURN_IN_TEST		BIT(7)
+	#define REG_DBG_UART_LOOPBACK_EN_B		BIT(8)
+	#define REG_DBG_UART_SET_IDDQ			BIT(9)
+	#define REG_DBG_UART_ATE_RESET			BIT(10)
+
+#define REG_TEST					0x14
+	#define REG_TEST_DATA_IN_MASK			GENMASK(3, 0)
+	#define REG_TEST_EN_MASK			GENMASK(7, 4)
+	#define REG_TEST_ADDR_MASK			GENMASK(11, 8)
+	#define REG_TEST_DATA_OUT_SEL			BIT(12)
+	#define REG_TEST_CLK				BIT(13)
+	#define REG_TEST_VA_TEST_EN_B_MASK		GENMASK(15, 14)
+	#define REG_TEST_DATA_OUT_MASK			GENMASK(19, 16)
+	#define REG_TEST_DISABLE_ID_PULLUP		BIT(20)
+
+#define REG_TUNE					0x18
+	#define REG_TUNE_TX_RES_TUNE_MASK		GENMASK(1, 0)
+	#define REG_TUNE_TX_HSXV_TUNE_MASK		GENMASK(3, 2)
+	#define REG_TUNE_TX_VREF_TUNE_MASK		GENMASK(7, 4)
+	#define REG_TUNE_TX_RISE_TUNE_MASK		GENMASK(9, 8)
+	#define REG_TUNE_TX_PREEMP_PULSE_TUNE		BIT(10)
+	#define REG_TUNE_TX_PREEMP_AMP_TUNE_MASK	GENMASK(12, 11)
+	#define REG_TUNE_TX_FSLS_TUNE_MASK		GENMASK(16, 13)
+	#define REG_TUNE_SQRX_TUNE_MASK			GENMASK(19, 17)
+	#define REG_TUNE_OTG_TUNE			GENMASK(22, 20)
+	#define REG_TUNE_COMP_DIS_TUNE			GENMASK(25, 23)
+	#define REG_TUNE_HOST_DM_PULLDOWN		BIT(26)
+	#define REG_TUNE_HOST_DP_PULLDOWN		BIT(27)
+
+#define RESET_COMPLETE_TIME				500
+#define ACA_ENABLE_COMPLETE_TIME			50
+
+struct phy_meson8b_usb2_match_data {
+	bool			host_enable_aca;
+};
+
+struct phy_meson8b_usb2_priv {
+	struct regmap					*regmap;
+	enum usb_dr_mode				dr_mode;
+	struct clk					*clk_usb_general;
+	struct clk					*clk_usb;
+	struct reset_control				*reset;
+	const struct phy_meson8b_usb2_match_data	*match;
+};
+
+static const struct regmap_config phy_meson8b_usb2_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = REG_TUNE,
+};
+
+static int phy_meson8b_usb2_power_on(struct phy *phy)
+{
+	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
+	u32 reg;
+	int ret;
+
+	if (!IS_ERR_OR_NULL(priv->reset)) {
+		ret = reset_control_reset(priv->reset);
+		if (ret) {
+			dev_err(&phy->dev, "Failed to trigger USB reset\n");
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(priv->clk_usb_general);
+	if (ret) {
+		dev_err(&phy->dev, "Failed to enable USB general clock\n");
+		reset_control_rearm(priv->reset);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(priv->clk_usb);
+	if (ret) {
+		dev_err(&phy->dev, "Failed to enable USB DDR clock\n");
+		clk_disable_unprepare(priv->clk_usb_general);
+		reset_control_rearm(priv->reset);
+		return ret;
+	}
+
+	regmap_set_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL);
+
+	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
+			   FIELD_PREP(REG_CTRL_REF_CLK_SEL_MASK, 0x2));
+
+	regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK,
+			   FIELD_PREP(REG_CTRL_FSEL_MASK, 0x5));
+
+	/* reset the PHY */
+	regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET);
+	udelay(RESET_COMPLETE_TIME);
+	regmap_clear_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET);
+	udelay(RESET_COMPLETE_TIME);
+
+	regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT);
+
+	if (priv->dr_mode == USB_DR_MODE_HOST) {
+		regmap_clear_bits(priv->regmap, REG_DBG_UART,
+				  REG_DBG_UART_SET_IDDQ);
+
+		if (priv->match->host_enable_aca) {
+			regmap_set_bits(priv->regmap, REG_ADP_BC,
+					REG_ADP_BC_ACA_ENABLE);
+
+			udelay(ACA_ENABLE_COMPLETE_TIME);
+
+			regmap_read(priv->regmap, REG_ADP_BC, &reg);
+			if (reg & REG_ADP_BC_ACA_PIN_FLOAT) {
+				dev_warn(&phy->dev, "USB ID detect failed!\n");
+				clk_disable_unprepare(priv->clk_usb);
+				clk_disable_unprepare(priv->clk_usb_general);
+				reset_control_rearm(priv->reset);
+				return -EINVAL;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int phy_meson8b_usb2_power_off(struct phy *phy)
+{
+	struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->dr_mode == USB_DR_MODE_HOST)
+		regmap_set_bits(priv->regmap, REG_DBG_UART,
+				REG_DBG_UART_SET_IDDQ);
+
+	clk_disable_unprepare(priv->clk_usb);
+	clk_disable_unprepare(priv->clk_usb_general);
+	reset_control_rearm(priv->reset);
+
+	/* power off the PHY by putting it into reset mode */
+	regmap_set_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET);
+
+	return 0;
+}
+
+static const struct phy_ops phy_meson8b_usb2_ops = {
+	.power_on	= phy_meson8b_usb2_power_on,
+	.power_off	= phy_meson8b_usb2_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson8b_usb2_probe(struct platform_device *pdev)
+{
+	struct phy_meson8b_usb2_priv *priv;
+	struct phy *phy;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->match = device_get_match_data(&pdev->dev);
+	if (!priv->match)
+		return -ENODEV;
+
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					     &phy_meson8b_usb2_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general");
+	if (IS_ERR(priv->clk_usb_general))
+		return PTR_ERR(priv->clk_usb_general);
+
+	priv->clk_usb = devm_clk_get(&pdev->dev, "usb");
+	if (IS_ERR(priv->clk_usb))
+		return PTR_ERR(priv->clk_usb);
+
+	priv->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+	if (IS_ERR(priv->reset))
+		return dev_err_probe(&pdev->dev, PTR_ERR(priv->reset),
+				     "Failed to get the reset line");
+
+	priv->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
+	if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
+		dev_err(&pdev->dev,
+			"missing dual role configuration of the controller\n");
+		return -EINVAL;
+	}
+
+	phy = devm_phy_create(&pdev->dev, NULL, &phy_meson8b_usb2_ops);
+	if (IS_ERR(phy)) {
+		return dev_err_probe(&pdev->dev, PTR_ERR(phy),
+				     "failed to create PHY\n");
+	}
+
+	phy_set_drvdata(phy, priv);
+
+	phy_provider =
+		devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct phy_meson8b_usb2_match_data phy_meson8_usb2_match_data = {
+	.host_enable_aca = false,
+};
+
+static const struct phy_meson8b_usb2_match_data phy_meson8b_usb2_match_data = {
+	.host_enable_aca = true,
+};
+
+static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+	{
+		.compatible = "amlogic,meson8-usb2-phy",
+		.data = &phy_meson8_usb2_match_data
+	},
+	{
+		.compatible = "amlogic,meson8b-usb2-phy",
+		.data = &phy_meson8b_usb2_match_data
+	},
+	{
+		.compatible = "amlogic,meson8m2-usb2-phy",
+		.data = &phy_meson8b_usb2_match_data
+	},
+	{
+		.compatible = "amlogic,meson-gxbb-usb2-phy",
+		.data = &phy_meson8b_usb2_match_data
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, phy_meson8b_usb2_of_match);
+
+static struct platform_driver phy_meson8b_usb2_driver = {
+	.probe	= phy_meson8b_usb2_probe,
+	.driver	= {
+		.name		= "phy-meson-usb2",
+		.of_match_table	= phy_meson8b_usb2_of_match,
+	},
+};
+module_platform_driver(phy_meson8b_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY driver");
+MODULE_LICENSE("GPL");