Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 206 insertions, 0 deletions

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
new file mode 100644
index 000000000..19f3b7d12
--- /dev/null
+++ b/drivers/phy/Kconfig
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PHY
+#
+
+menu "PHY Subsystem"
+
+config PHY_COMMON_PROPS
+	bool "PHY common properties" if KUNIT_ALL_TESTS
+	help
+	  This parses properties common between generic PHYs and Ethernet PHYs.
+
+	  Select this from consumer drivers to gain access to helpers for
+	  parsing properties from the
+	  Documentation/devicetree/bindings/phy/phy-common-props.yaml schema.
+
+config PHY_COMMON_PROPS_TEST
+	tristate "KUnit tests for PHY common props" if !KUNIT_ALL_TESTS
+	depends on KUNIT && PHY_COMMON_PROPS
+	default KUNIT_ALL_TESTS
+	help
+	  This builds KUnit tests for the PHY common property API.
+
+	  For more information on KUnit and unit tests in general,
+	  please refer to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  When in doubt, say N.
+
+config GENERIC_PHY
+	bool "PHY Core"
+	help
+	  Generic PHY support.
+
+	  This framework is designed to provide a generic interface for PHY
+	  devices present in the kernel. This layer will have the generic
+	  API by which phy drivers can create PHY using the phy framework and
+	  phy users can obtain reference to the PHY. All the users of this
+	  framework should select this config.
+
+config GENERIC_PHY_MIPI_DPHY
+	bool
+	select GENERIC_PHY
+	help
+	  Generic MIPI D-PHY support.
+
+	  Provides a number of helpers a core functions for MIPI D-PHY
+	  drivers to us.
+
+config PHY_AIROHA_PCIE
+	tristate "Airoha PCIe-PHY Driver"
+	depends on ARCH_AIROHA || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say Y here to add support for Airoha PCIe PHY driver.
+	  This driver create the basic PHY instance and provides initialize
+	  callback for PCIe GEN3 port.
+
+config PHY_CAN_TRANSCEIVER
+	tristate "CAN transceiver PHY"
+	select GENERIC_PHY
+	select MULTIPLEXER
+	help
+	  This option enables support for CAN transceivers as a PHY. This
+	  driver provides function for putting the transceivers in various
+	  functional modes using gpios and sets the attribute max link
+	  rate, for CAN drivers.
+
+config PHY_EYEQ5_ETH
+	tristate "Ethernet PHY Driver on EyeQ5"
+	depends on OF
+	depends on MACH_EYEQ5 || COMPILE_TEST
+	select AUXILIARY_BUS
+	select GENERIC_PHY
+	default MACH_EYEQ5
+	help
+	  Enable this to support the Ethernet PHY integrated on EyeQ5.
+	  It supports both RGMII and SGMII. Registers are located in a
+	  shared register region called OLB. If M is selected, the
+	  module will be called phy-eyeq5-eth.
+
+config PHY_ECONET_PCIE
+	tristate "EcoNet PCIe-PHY Driver"
+	depends on ECONET || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Say Y here to add support for EcoNet PCIe PHY driver.
+	  This driver create the basic PHY instance and provides initialize
+	  callback for PCIe GEN1 and GEN2 ports. This PHY is found on
+	  EcoNet SoCs including EN751221 and EN7528.
+
+config PHY_GOOGLE_USB
+	tristate "Google Tensor SoC USB PHY driver"
+	select GENERIC_PHY
+	depends on TYPEC
+	help
+	  Enable support for the USB PHY on Google Tensor SoCs, starting with
+	  the G5 generation (Laguna). This driver provides the PHY interfaces
+	  to interact with the SNPS eUSB2 and USB 3.2/DisplayPort Combo PHY,
+	  both of which are integrated with the DWC3 USB DRD controller.
+	  This driver currently supports USB high-speed.
+
+config USB_LGM_PHY
+	tristate "INTEL Lightning Mountain USB PHY Driver"
+	depends on USB_SUPPORT
+	depends on X86 || COMPILE_TEST
+	select USB_PHY
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
+	help
+	  Enable this to support Intel DWC3 PHY USB phy. This driver provides
+	  interface to interact with USB GEN-II and USB 3.x PHY that is part
+	  of the Intel network SOC.
+
+config PHY_LPC18XX_USB_OTG
+	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	depends on MFD_SYSCON
+	select GENERIC_PHY
+	help
+	  Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
+
+	  This driver is need for USB0 support on LPC18xx/43xx and takes
+	  care of enabling and clock setup.
+
+config PHY_NXP_PTN3222
+	tristate "NXP PTN3222 1-port eUSB2 to USB2 redriver"
+	depends on I2C
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Enable this to support NXP PTN3222 1-port eUSB2 to USB2 Redriver.
+	  This redriver performs translation between eUSB2 and USB2 signalling
+	  schemes. It supports all three USB 2.0 data rates: Low Speed, Full
+	  Speed and High Speed.
+
+config PHY_NXP_TJA1145
+	tristate "NXP TJA1145 CAN transceiver PHY"
+	select GENERIC_PHY
+	select REGMAP_SPI
+	depends on SPI
+	help
+	  This option enables support for NXPs TJA1145 CAN transceiver as a PHY.
+	  This driver provides function for putting the transceiver in various
+	  functional modes using SPI commands.
+
+config PHY_PISTACHIO_USB
+	tristate "IMG Pistachio USB2.0 PHY driver"
+	depends on MIPS || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
+
+config PHY_SNPS_EUSB2
+	tristate "SNPS eUSB2 PHY Driver"
+	depends on OF && (ARCH_EXYNOS || ARCH_QCOM || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enable support for the USB high-speed SNPS eUSB2 phy on select
+	  SoCs. The PHY is usually paired with a Synopsys DWC3 USB controller.
+
+config PHY_XGENE
+	tristate "APM X-Gene 15Gbps PHY support"
+	depends on HAS_IOMEM && OF && (ARCH_XGENE || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  This option enables support for APM X-Gene SoC multi-purpose PHY.
+
+source "drivers/phy/allwinner/Kconfig"
+source "drivers/phy/amlogic/Kconfig"
+source "drivers/phy/apple/Kconfig"
+source "drivers/phy/axiado/Kconfig"
+source "drivers/phy/broadcom/Kconfig"
+source "drivers/phy/cadence/Kconfig"
+source "drivers/phy/canaan/Kconfig"
+source "drivers/phy/eswin/Kconfig"
+source "drivers/phy/freescale/Kconfig"
+source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/ingenic/Kconfig"
+source "drivers/phy/intel/Kconfig"
+source "drivers/phy/lantiq/Kconfig"
+source "drivers/phy/marvell/Kconfig"
+source "drivers/phy/mediatek/Kconfig"
+source "drivers/phy/microchip/Kconfig"
+source "drivers/phy/motorola/Kconfig"
+source "drivers/phy/mscc/Kconfig"
+source "drivers/phy/nuvoton/Kconfig"
+source "drivers/phy/qualcomm/Kconfig"
+source "drivers/phy/ralink/Kconfig"
+source "drivers/phy/realtek/Kconfig"
+source "drivers/phy/renesas/Kconfig"
+source "drivers/phy/rockchip/Kconfig"
+source "drivers/phy/samsung/Kconfig"
+source "drivers/phy/socionext/Kconfig"
+source "drivers/phy/sophgo/Kconfig"
+source "drivers/phy/spacemit/Kconfig"
+source "drivers/phy/st/Kconfig"
+source "drivers/phy/starfive/Kconfig"
+source "drivers/phy/sunplus/Kconfig"
+source "drivers/phy/tegra/Kconfig"
+source "drivers/phy/ti/Kconfig"
+source "drivers/phy/xilinx/Kconfig"
+
+endmenu