bpf: mark a NULL kfunc argument precisegrafted

check_kfunc_arg() allows bpf_register_is_null() for nullable arguments
w/o marking the underlying scalar register precise. Hence a checkpoint
created on such a path would prune against arbitrary scalar value.

Fixes: 3bda08b63670 ("bpf: Allow NULL buffers in bpf_dynptr_slice(_rw)")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260904-register-is-null-precise-fixes-v1-5-0f5a360ff15d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

1 files changed, 136 insertions, 0 deletions

diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig
new file mode 100644
index 000000000..31974c7dd
--- /dev/null
+++ b/drivers/nvme/host/Kconfig
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NVME_CORE
+	tristate
+
+config BLK_DEV_NVME
+	tristate "NVM Express block device"
+	depends on PCI && BLOCK
+	select NVME_CORE
+	help
+	  The NVM Express driver is for solid state drives directly
+	  connected to the PCI or PCI Express bus.  If you know you
+	  don't have one of these, it is safe to answer N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvme.
+
+config NVME_MULTIPATH
+	bool "NVMe multipath support"
+	depends on NVME_CORE
+	help
+	  This option controls support for multipath access to NVMe
+	  subsystems. If this option is enabled support for NVMe multipath
+	  access is included in the kernel. If this option is disabled support
+	  for NVMe multipath access is excluded from the kernel. When this
+	  option is disabled each controller/namespace receives its
+	  own /dev/nvmeXnY device entry and NVMe multipath access is
+	  not supported.
+
+	  If unsure, say Y.
+
+config NVME_VERBOSE_ERRORS
+	bool "NVMe verbose error reporting"
+	depends on NVME_CORE
+	help
+	   This option enables verbose reporting for NVMe errors. The
+	   error translation table will grow the kernel image size by
+	   about 4 KB.
+
+config NVME_HWMON
+	bool "NVMe hardware monitoring"
+	depends on (NVME_CORE=y && HWMON=y) || (NVME_CORE=m && HWMON)
+	help
+	  This provides support for NVMe hardware monitoring. If enabled,
+	  a hardware monitoring device will be created for each NVMe drive
+	  in the system.
+
+config NVME_FABRICS
+	select NVME_CORE
+	select NVME_KEYRING if NVME_TCP_TLS
+	tristate
+
+config NVME_RDMA
+	tristate "NVM Express over Fabrics RDMA host driver"
+	depends on INFINIBAND && INFINIBAND_ADDR_TRANS && BLOCK
+	select NVME_FABRICS
+	select SG_POOL
+	help
+	  This provides support for the NVMe over Fabrics protocol using
+	  the RDMA (Infiniband, RoCE, iWarp) transport.  This allows you
+	  to use remote block devices exported using the NVMe protocol set.
+
+	  To configure a NVMe over Fabrics controller use the nvme-cli tool
+	  from https://github.com/linux-nvme/nvme-cli.
+
+	  If unsure, say N.
+
+config NVME_FC
+	tristate "NVM Express over Fabrics FC host driver"
+	depends on BLOCK
+	depends on HAS_DMA
+	select NVME_FABRICS
+	select SG_POOL
+	help
+	  This provides support for the NVMe over Fabrics protocol using
+	  the FC transport.  This allows you to use remote block devices
+	  exported using the NVMe protocol set.
+
+	  To configure a NVMe over Fabrics controller use the nvme-cli tool
+	  from https://github.com/linux-nvme/nvme-cli.
+
+	  If unsure, say N.
+
+config NVME_TCP
+	tristate "NVM Express over Fabrics TCP host driver"
+	depends on INET
+	depends on BLOCK
+	select CRC32
+	select NET_CRC32C
+	select NVME_FABRICS
+	help
+	  This provides support for the NVMe over Fabrics protocol using
+	  the TCP transport.  This allows you to use remote block devices
+	  exported using the NVMe protocol set.
+
+	  To configure a NVMe over Fabrics controller use the nvme-cli tool
+	  from https://github.com/linux-nvme/nvme-cli.
+
+	  If unsure, say N.
+
+config NVME_TCP_TLS
+	bool "NVMe over Fabrics TCP TLS encryption support"
+	depends on NVME_TCP
+	select NET_HANDSHAKE
+	select KEYS
+	select TLS
+	help
+	  Enables TLS encryption for NVMe TCP using the netlink handshake API.
+
+	  The TLS handshake daemon is available at
+	  https://github.com/oracle/ktls-utils.
+
+	  If unsure, say N.
+
+config NVME_HOST_AUTH
+	bool "NVMe over Fabrics In-Band Authentication in host side"
+	depends on NVME_CORE
+	select NVME_AUTH
+	select NVME_KEYRING
+	help
+	  This provides support for NVMe over Fabrics In-Band Authentication in
+	  host side.
+
+	  If unsure, say N.
+
+config NVME_APPLE
+	tristate "Apple ANS2 NVM Express host driver"
+	depends on OF && BLOCK
+	depends on APPLE_RTKIT && APPLE_SART
+	depends on ARCH_APPLE || COMPILE_TEST
+	select NVME_CORE
+	help
+	  This provides support for the NVMe controller embedded in Apple SoCs
+	  such as the M1.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvme-apple.