objtool: Validate disassembler headers in libopcodes probegrafted

commit 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries")
tested for libopcodes availability by linking a test snippet with a forward
declaration of disassemble_init_for_target().

However, testing symbol linkage with an extern declaration only verifies
the presence of the library (.so/.a) and bypasses checking for development
headers (binutils-dev). On systems where libopcodes is present without
development headers installed, the probe succeeds, enabling BUILD_DISAS.
Subsequent compilation of objtool then fails:

  fatal error: 'bfd.h' file not found
    113 | #include <bfd.h>

Additionally, the probe invokes $(HOSTCC) without $(HOSTCFLAGS), ignoring
any sysroot or include flags specified for the host compiler.

Fix this by including <bfd.h> and <dis-asm.h> directly in the test snippet,
passing $(HOSTCFLAGS) so host compiler options are respected, and defining
PACKAGE="objtool" to satisfy the configuration check in <bfd.h>.

Fixes: 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries")
Fixes: 436326bc525d ("objtool: fix build failure due to missing libopcodes check")
Reported-by: Alice Ryhl <aliceryhl@google.com>
Assisted-by: Antigravity:Gemini-Next
Signed-off-by: Ulises Mendez Martinez <umendez@google.com>
Link: https://patch.msgid.link/20260904150710.2997558-1-umendez@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>

1 files changed, 65 insertions, 0 deletions

diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
new file mode 100644
index 000000000..00e9b7ee1
--- /dev/null
+++ b/drivers/net/wan/Makefile
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux network (wan) device drivers.
+#
+# 3 Aug 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+obj-$(CONFIG_HDLC)		+= hdlc.o
+obj-$(CONFIG_HDLC_RAW)		+= hdlc_raw.o
+obj-$(CONFIG_HDLC_RAW_ETH)	+= hdlc_raw_eth.o
+obj-$(CONFIG_HDLC_CISCO)	+= hdlc_cisco.o
+obj-$(CONFIG_HDLC_FR)		+= hdlc_fr.o
+obj-$(CONFIG_HDLC_PPP)		+= hdlc_ppp.o
+obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o
+
+obj-y				+= framer/
+
+obj-$(CONFIG_FARSYNC)		+= farsync.o
+
+obj-$(CONFIG_LAPBETHER)		+= lapbether.o
+obj-$(CONFIG_N2)		+= n2.o
+obj-$(CONFIG_C101)		+= c101.o
+obj-$(CONFIG_WANXL)		+= wanxl.o
+obj-$(CONFIG_PCI200SYN)		+= pci200syn.o
+obj-$(CONFIG_PC300TOO)		+= pc300too.o
+obj-$(CONFIG_IXP4XX_HSS)	+= ixp4xx_hss.o
+obj-$(CONFIG_FSL_QMC_HDLC)	+= fsl_qmc_hdlc.o
+obj-$(CONFIG_FSL_UCC_HDLC)	+= fsl_ucc_hdlc.o
+obj-$(CONFIG_SLIC_DS26522)	+= slic_ds26522.o
+
+clean-files := wanxlfw.inc
+$(obj)/wanxl.o:	$(obj)/wanxlfw.inc
+
+CROSS_COMPILE_M68K = m68k-linux-gnu-
+
+ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
+ifeq ($(ARCH),m68k)
+  M68KCC = $(CC)
+  M68KLD = $(LD)
+else
+  M68KCC = $(CROSS_COMPILE_M68K)gcc
+  M68KLD = $(CROSS_COMPILE_M68K)ld
+endif
+
+quiet_cmd_build_wanxlfw = BLDFW   $@
+      cmd_build_wanxlfw = hexdump -ve '"\n" 16/1 "0x%02X,"' $< | \
+	sed 's/0x  ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' > $@
+
+$(obj)/wanxlfw.inc: $(obj)/wanxlfw.bin FORCE
+	$(call if_changed,build_wanxlfw)
+
+quiet_cmd_m68kld_bin_o = M68KLD  $@
+      cmd_m68kld_bin_o = $(M68KLD) --oformat binary -Ttext 0x1000 $< -o $@
+
+$(obj)/wanxlfw.bin: $(obj)/wanxlfw.o FORCE
+	$(call if_changed,m68kld_bin_o)
+
+quiet_cmd_m68kas_o_S = M68KAS  $@
+      cmd_m68kas_o_S = $(M68KCC) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi -c -o $@ $<
+
+$(obj)/wanxlfw.o: $(src)/wanxlfw.S FORCE
+	$(call if_changed_dep,m68kas_o_S)
+endif
+targets += wanxlfw.inc wanxlfw.bin wanxlfw.o