staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 83 insertions, 0 deletions

diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig
new file mode 100644
index 000000000..a0f2ae668
--- /dev/null
+++ b/drivers/net/pse-pd/Kconfig
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Ethernet Power Sourcing Equipment drivers
+#
+
+menuconfig PSE_CONTROLLER
+	bool "Ethernet Power Sourcing Equipment Support"
+	depends on REGULATOR
+	help
+	  Generic Power Sourcing Equipment Controller support.
+
+	  If unsure, say no.
+
+if PSE_CONTROLLER
+
+config PSE_REALTEK_MCU
+	tristate
+	help
+	  Shared core for the Realtek PSE MCU driver. This is selected
+	  automatically by the transport options below.
+
+config PSE_REALTEK_MCU_I2C
+	tristate "Realtek PSE MCU driver (I2C transport)"
+	depends on I2C
+	select PSE_REALTEK_MCU
+	help
+	  Driver for the microcontroller (MCU) that fronts the PSE
+	  hardware on various Realtek-based managed switches, attached
+	  via I2C/SMBus. The MCU exposes a message-based protocol; the actual
+	  PSE silicon is not accessed directly. To compile this driver as a
+	  module, choose M here: the module will be called realtek-pse-mcu-i2c.
+
+config PSE_REALTEK_MCU_UART
+	tristate "Realtek PSE MCU driver (UART transport)"
+	depends on SERIAL_DEV_BUS
+	select PSE_REALTEK_MCU
+	help
+	  Driver for the microcontroller (MCU) that fronts the PSE
+	  hardware on various Realtek-based managed switches, attached
+	  via UART. The MCU exposes a message-based protocol; the actual PSE
+	  silicon is not accessed directly. To compile this driver as a
+	  module, choose M here: the module will be called realtek-pse-mcu-uart.
+
+config PSE_REGULATOR
+	tristate "Regulator based PSE controller"
+	help
+	  This module provides support for simple regulator based Ethernet Power
+	  Sourcing Equipment without automatic classification support. For
+	  example for basic implementation of PoDL (802.3bu) specification.
+
+config PSE_PD692X0
+	tristate "PD692X0 PSE controller"
+	depends on I2C
+	select FW_LOADER
+	select FW_UPLOAD
+	help
+	  This module provides support for PD692x0 regulator based Ethernet
+	  Power Sourcing Equipment.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pd692x0.
+
+config PSE_SI3474
+	tristate "Si3474 PSE controller"
+	depends on I2C
+	help
+	  This module provides support for Si3474 regulator based Ethernet
+	  Power Sourcing Equipment.
+	  Only 4-pair PSE configurations are supported.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called si3474.
+
+config PSE_TPS23881
+	tristate "TPS23881 PSE controller"
+	depends on I2C
+	help
+	  This module provides support for TPS23881 regulator based Ethernet
+	  Power Sourcing Equipment.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps23881.
+endif