dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()grafted

When dma_device_put() drops the last reference on chan->device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.

dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:

	slab-use-after-free in dma_chan_put+0x3e6/0x4c0
	Read of size 8 by task insmod/6319
	Freed by task 6319:
	  kfree+0x225/0x470
	  dma_chan_put+0x395/0x4c0
	  dmaengine_put+0xf8/0x160

Cache the module owner in dma_chan_put() before the put so the trailing
module_put() does not need chan->device.

Fixes: 8ad342a86359 ("dmaengine: Add reference counting to dma_device struct")
Suggested-by: Sashiko <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260518-dmaengine-kref-fix-v1-1-4d6125048fb7@amd.com
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Link: https://patch.msgid.link/20260822-dmaengine-kref-fix-v5-3-d4a4ee47d927@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

1 files changed, 83 insertions, 0 deletions

diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig
new file mode 100644
index 000000000..a0f2ae668
--- /dev/null
+++ b/drivers/net/pse-pd/Kconfig
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Ethernet Power Sourcing Equipment drivers
+#
+
+menuconfig PSE_CONTROLLER
+	bool "Ethernet Power Sourcing Equipment Support"
+	depends on REGULATOR
+	help
+	  Generic Power Sourcing Equipment Controller support.
+
+	  If unsure, say no.
+
+if PSE_CONTROLLER
+
+config PSE_REALTEK_MCU
+	tristate
+	help
+	  Shared core for the Realtek PSE MCU driver. This is selected
+	  automatically by the transport options below.
+
+config PSE_REALTEK_MCU_I2C
+	tristate "Realtek PSE MCU driver (I2C transport)"
+	depends on I2C
+	select PSE_REALTEK_MCU
+	help
+	  Driver for the microcontroller (MCU) that fronts the PSE
+	  hardware on various Realtek-based managed switches, attached
+	  via I2C/SMBus. The MCU exposes a message-based protocol; the actual
+	  PSE silicon is not accessed directly. To compile this driver as a
+	  module, choose M here: the module will be called realtek-pse-mcu-i2c.
+
+config PSE_REALTEK_MCU_UART
+	tristate "Realtek PSE MCU driver (UART transport)"
+	depends on SERIAL_DEV_BUS
+	select PSE_REALTEK_MCU
+	help
+	  Driver for the microcontroller (MCU) that fronts the PSE
+	  hardware on various Realtek-based managed switches, attached
+	  via UART. The MCU exposes a message-based protocol; the actual PSE
+	  silicon is not accessed directly. To compile this driver as a
+	  module, choose M here: the module will be called realtek-pse-mcu-uart.
+
+config PSE_REGULATOR
+	tristate "Regulator based PSE controller"
+	help
+	  This module provides support for simple regulator based Ethernet Power
+	  Sourcing Equipment without automatic classification support. For
+	  example for basic implementation of PoDL (802.3bu) specification.
+
+config PSE_PD692X0
+	tristate "PD692X0 PSE controller"
+	depends on I2C
+	select FW_LOADER
+	select FW_UPLOAD
+	help
+	  This module provides support for PD692x0 regulator based Ethernet
+	  Power Sourcing Equipment.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pd692x0.
+
+config PSE_SI3474
+	tristate "Si3474 PSE controller"
+	depends on I2C
+	help
+	  This module provides support for Si3474 regulator based Ethernet
+	  Power Sourcing Equipment.
+	  Only 4-pair PSE configurations are supported.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called si3474.
+
+config PSE_TPS23881
+	tristate "TPS23881 PSE controller"
+	depends on I2C
+	help
+	  This module provides support for TPS23881 regulator based Ethernet
+	  Power Sourcing Equipment.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps23881.
+endif