objtool: Validate disassembler headers in libopcodes probegrafted

commit 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries")
tested for libopcodes availability by linking a test snippet with a forward
declaration of disassemble_init_for_target().

However, testing symbol linkage with an extern declaration only verifies
the presence of the library (.so/.a) and bypasses checking for development
headers (binutils-dev). On systems where libopcodes is present without
development headers installed, the probe succeeds, enabling BUILD_DISAS.
Subsequent compilation of objtool then fails:

  fatal error: 'bfd.h' file not found
    113 | #include <bfd.h>

Additionally, the probe invokes $(HOSTCC) without $(HOSTCFLAGS), ignoring
any sysroot or include flags specified for the host compiler.

Fix this by including <bfd.h> and <dis-asm.h> directly in the test snippet,
passing $(HOSTCFLAGS) so host compiler options are respected, and defining
PACKAGE="objtool" to satisfy the configuration check in <bfd.h>.

Fixes: 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries")
Fixes: 436326bc525d ("objtool: fix build failure due to missing libopcodes check")
Reported-by: Alice Ryhl <aliceryhl@google.com>
Assisted-by: Antigravity:Gemini-Next
Signed-off-by: Ulises Mendez Martinez <umendez@google.com>
Link: https://patch.msgid.link/20260904150710.2997558-1-umendez@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>

1 files changed, 83 insertions, 0 deletions

diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig
new file mode 100644
index 000000000..a0f2ae668
--- /dev/null
+++ b/drivers/net/pse-pd/Kconfig
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Ethernet Power Sourcing Equipment drivers
+#
+
+menuconfig PSE_CONTROLLER
+	bool "Ethernet Power Sourcing Equipment Support"
+	depends on REGULATOR
+	help
+	  Generic Power Sourcing Equipment Controller support.
+
+	  If unsure, say no.
+
+if PSE_CONTROLLER
+
+config PSE_REALTEK_MCU
+	tristate
+	help
+	  Shared core for the Realtek PSE MCU driver. This is selected
+	  automatically by the transport options below.
+
+config PSE_REALTEK_MCU_I2C
+	tristate "Realtek PSE MCU driver (I2C transport)"
+	depends on I2C
+	select PSE_REALTEK_MCU
+	help
+	  Driver for the microcontroller (MCU) that fronts the PSE
+	  hardware on various Realtek-based managed switches, attached
+	  via I2C/SMBus. The MCU exposes a message-based protocol; the actual
+	  PSE silicon is not accessed directly. To compile this driver as a
+	  module, choose M here: the module will be called realtek-pse-mcu-i2c.
+
+config PSE_REALTEK_MCU_UART
+	tristate "Realtek PSE MCU driver (UART transport)"
+	depends on SERIAL_DEV_BUS
+	select PSE_REALTEK_MCU
+	help
+	  Driver for the microcontroller (MCU) that fronts the PSE
+	  hardware on various Realtek-based managed switches, attached
+	  via UART. The MCU exposes a message-based protocol; the actual PSE
+	  silicon is not accessed directly. To compile this driver as a
+	  module, choose M here: the module will be called realtek-pse-mcu-uart.
+
+config PSE_REGULATOR
+	tristate "Regulator based PSE controller"
+	help
+	  This module provides support for simple regulator based Ethernet Power
+	  Sourcing Equipment without automatic classification support. For
+	  example for basic implementation of PoDL (802.3bu) specification.
+
+config PSE_PD692X0
+	tristate "PD692X0 PSE controller"
+	depends on I2C
+	select FW_LOADER
+	select FW_UPLOAD
+	help
+	  This module provides support for PD692x0 regulator based Ethernet
+	  Power Sourcing Equipment.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pd692x0.
+
+config PSE_SI3474
+	tristate "Si3474 PSE controller"
+	depends on I2C
+	help
+	  This module provides support for Si3474 regulator based Ethernet
+	  Power Sourcing Equipment.
+	  Only 4-pair PSE configurations are supported.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called si3474.
+
+config PSE_TPS23881
+	tristate "TPS23881 PSE controller"
+	depends on I2C
+	help
+	  This module provides support for TPS23881 regulator based Ethernet
+	  Power Sourcing Equipment.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps23881.
+endif