arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 83 insertions, 0 deletions

diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig
new file mode 100644
index 000000000..a0f2ae668
--- /dev/null
+++ b/drivers/net/pse-pd/Kconfig
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Ethernet Power Sourcing Equipment drivers
+#
+
+menuconfig PSE_CONTROLLER
+	bool "Ethernet Power Sourcing Equipment Support"
+	depends on REGULATOR
+	help
+	  Generic Power Sourcing Equipment Controller support.
+
+	  If unsure, say no.
+
+if PSE_CONTROLLER
+
+config PSE_REALTEK_MCU
+	tristate
+	help
+	  Shared core for the Realtek PSE MCU driver. This is selected
+	  automatically by the transport options below.
+
+config PSE_REALTEK_MCU_I2C
+	tristate "Realtek PSE MCU driver (I2C transport)"
+	depends on I2C
+	select PSE_REALTEK_MCU
+	help
+	  Driver for the microcontroller (MCU) that fronts the PSE
+	  hardware on various Realtek-based managed switches, attached
+	  via I2C/SMBus. The MCU exposes a message-based protocol; the actual
+	  PSE silicon is not accessed directly. To compile this driver as a
+	  module, choose M here: the module will be called realtek-pse-mcu-i2c.
+
+config PSE_REALTEK_MCU_UART
+	tristate "Realtek PSE MCU driver (UART transport)"
+	depends on SERIAL_DEV_BUS
+	select PSE_REALTEK_MCU
+	help
+	  Driver for the microcontroller (MCU) that fronts the PSE
+	  hardware on various Realtek-based managed switches, attached
+	  via UART. The MCU exposes a message-based protocol; the actual PSE
+	  silicon is not accessed directly. To compile this driver as a
+	  module, choose M here: the module will be called realtek-pse-mcu-uart.
+
+config PSE_REGULATOR
+	tristate "Regulator based PSE controller"
+	help
+	  This module provides support for simple regulator based Ethernet Power
+	  Sourcing Equipment without automatic classification support. For
+	  example for basic implementation of PoDL (802.3bu) specification.
+
+config PSE_PD692X0
+	tristate "PD692X0 PSE controller"
+	depends on I2C
+	select FW_LOADER
+	select FW_UPLOAD
+	help
+	  This module provides support for PD692x0 regulator based Ethernet
+	  Power Sourcing Equipment.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pd692x0.
+
+config PSE_SI3474
+	tristate "Si3474 PSE controller"
+	depends on I2C
+	help
+	  This module provides support for Si3474 regulator based Ethernet
+	  Power Sourcing Equipment.
+	  Only 4-pair PSE configurations are supported.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called si3474.
+
+config PSE_TPS23881
+	tristate "TPS23881 PSE controller"
+	depends on I2C
+	help
+	  This module provides support for TPS23881 regulator based Ethernet
+	  Power Sourcing Equipment.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps23881.
+endif