openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

1 files changed, 98 insertions, 0 deletions

diff --git a/drivers/net/phy/uPD60620.c b/drivers/net/phy/uPD60620.c
new file mode 100644
index 000000000..900cb756c
--- /dev/null
+++ b/drivers/net/phy/uPD60620.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the Renesas PHY uPD60620.
+ *
+ * Copyright (C) 2015 Softing Industrial Automation GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define UPD60620_PHY_ID    0xb8242824
+
+/* Extended Registers and values */
+/* PHY Special Control/Status    */
+#define PHY_PHYSCR         0x1F      /* PHY.31 */
+#define PHY_PHYSCR_10MB    0x0004    /* PHY speed = 10mb */
+#define PHY_PHYSCR_100MB   0x0008    /* PHY speed = 100mb */
+#define PHY_PHYSCR_DUPLEX  0x0010    /* PHY Duplex */
+
+/* PHY Special Modes */
+#define PHY_SPM            0x12      /* PHY.18 */
+
+/* Init PHY */
+
+static int upd60620_config_init(struct phy_device *phydev)
+{
+	/* Enable support for passive HUBs (could be a strap option) */
+	/* PHYMODE: All speeds, HD in parallel detect */
+	return phy_write(phydev, PHY_SPM, 0x0180 | phydev->mdio.addr);
+}
+
+/* Get PHY status from common registers */
+
+static int upd60620_read_status(struct phy_device *phydev)
+{
+	int phy_state;
+
+	/* Read negotiated state */
+	phy_state = phy_read(phydev, MII_BMSR);
+	if (phy_state < 0)
+		return phy_state;
+
+	phydev->link = 0;
+	linkmode_zero(phydev->lp_advertising);
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	if (phy_state & (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
+		phy_state = phy_read(phydev, PHY_PHYSCR);
+		if (phy_state < 0)
+			return phy_state;
+
+		if (phy_state & (PHY_PHYSCR_10MB | PHY_PHYSCR_100MB)) {
+			phydev->link = 1;
+			phydev->speed = SPEED_10;
+			phydev->duplex = DUPLEX_HALF;
+
+			if (phy_state & PHY_PHYSCR_100MB)
+				phydev->speed = SPEED_100;
+			if (phy_state & PHY_PHYSCR_DUPLEX)
+				phydev->duplex = DUPLEX_FULL;
+
+			phy_state = phy_read(phydev, MII_LPA);
+			if (phy_state < 0)
+				return phy_state;
+
+			mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising,
+						  phy_state);
+
+			phy_resolve_aneg_pause(phydev);
+		}
+	}
+	return 0;
+}
+
+MODULE_DESCRIPTION("Renesas uPD60620 PHY driver");
+MODULE_AUTHOR("Bernd Edlinger <bernd.edlinger@hotmail.de>");
+MODULE_LICENSE("GPL");
+
+static struct phy_driver upd60620_driver[1] = { {
+	.phy_id         = UPD60620_PHY_ID,
+	.phy_id_mask    = 0xfffffffe,
+	.name           = "Renesas uPD60620",
+	/* PHY_BASIC_FEATURES */
+	.flags          = 0,
+	.config_init    = upd60620_config_init,
+	.read_status    = upd60620_read_status,
+} };
+
+module_phy_driver(upd60620_driver);
+
+static const struct mdio_device_id __maybe_unused upd60620_tbl[] = {
+	{ UPD60620_PHY_ID, 0xfffffffe },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, upd60620_tbl);