treewide: refresh kmalloc_obj() conversionsgrafted

This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci

This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.

Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.

Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>

1 files changed, 227 insertions, 0 deletions

diff --git a/drivers/net/phy/nxp-cbtx.c b/drivers/net/phy/nxp-cbtx.c
new file mode 100644
index 000000000..3286fcb4f
--- /dev/null
+++ b/drivers/net/phy/nxp-cbtx.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for 100BASE-TX PHY embedded into NXP SJA1110 switch
+ *
+ * Copyright 2022-2023 NXP
+ */
+
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define PHY_ID_CBTX_SJA1110			0x001bb020
+
+/* Registers */
+#define  CBTX_MODE_CTRL_STAT			0x11
+#define  CBTX_PDOWN_CTRL			0x18
+#define  CBTX_RX_ERR_COUNTER			0x1a
+#define  CBTX_IRQ_STAT				0x1d
+#define  CBTX_IRQ_ENABLE			0x1e
+
+/* Fields */
+#define CBTX_MODE_CTRL_STAT_AUTO_MDIX_EN	BIT(7)
+#define CBTX_MODE_CTRL_STAT_MDIX_MODE		BIT(6)
+
+#define CBTX_PDOWN_CTL_TRUE_PDOWN		BIT(0)
+
+#define CBTX_IRQ_ENERGYON			BIT(7)
+#define CBTX_IRQ_AN_COMPLETE			BIT(6)
+#define CBTX_IRQ_REM_FAULT			BIT(5)
+#define CBTX_IRQ_LINK_DOWN			BIT(4)
+#define CBTX_IRQ_AN_LP_ACK			BIT(3)
+#define CBTX_IRQ_PARALLEL_DETECT_FAULT		BIT(2)
+#define CBTX_IRQ_AN_PAGE_RECV			BIT(1)
+
+static int cbtx_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Can't soft reset unless we remove PHY from true power down mode */
+	ret = phy_clear_bits(phydev, CBTX_PDOWN_CTRL,
+			     CBTX_PDOWN_CTL_TRUE_PDOWN);
+	if (ret)
+		return ret;
+
+	return genphy_soft_reset(phydev);
+}
+
+static int cbtx_config_init(struct phy_device *phydev)
+{
+	/* Wait for cbtx_config_aneg() to kick in and apply this */
+	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+
+	return 0;
+}
+
+static int cbtx_mdix_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, CBTX_MODE_CTRL_STAT);
+	if (ret < 0)
+		return ret;
+
+	if (ret & CBTX_MODE_CTRL_STAT_MDIX_MODE)
+		phydev->mdix = ETH_TP_MDI_X;
+	else
+		phydev->mdix = ETH_TP_MDI;
+
+	return 0;
+}
+
+static int cbtx_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = cbtx_mdix_status(phydev);
+	if (ret)
+		return ret;
+
+	return genphy_read_status(phydev);
+}
+
+static int cbtx_mdix_config(struct phy_device *phydev)
+{
+	int ret;
+
+	switch (phydev->mdix_ctrl) {
+	case ETH_TP_MDI_AUTO:
+		return phy_set_bits(phydev, CBTX_MODE_CTRL_STAT,
+				    CBTX_MODE_CTRL_STAT_AUTO_MDIX_EN);
+	case ETH_TP_MDI:
+		ret = phy_clear_bits(phydev, CBTX_MODE_CTRL_STAT,
+				     CBTX_MODE_CTRL_STAT_AUTO_MDIX_EN);
+		if (ret)
+			return ret;
+
+		return phy_clear_bits(phydev, CBTX_MODE_CTRL_STAT,
+				      CBTX_MODE_CTRL_STAT_MDIX_MODE);
+	case ETH_TP_MDI_X:
+		ret = phy_clear_bits(phydev, CBTX_MODE_CTRL_STAT,
+				     CBTX_MODE_CTRL_STAT_AUTO_MDIX_EN);
+		if (ret)
+			return ret;
+
+		return phy_set_bits(phydev, CBTX_MODE_CTRL_STAT,
+				    CBTX_MODE_CTRL_STAT_MDIX_MODE);
+	}
+
+	return 0;
+}
+
+static int cbtx_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = cbtx_mdix_config(phydev);
+	if (ret)
+		return ret;
+
+	return genphy_config_aneg(phydev);
+}
+
+static int cbtx_ack_interrupts(struct phy_device *phydev)
+{
+	return phy_read(phydev, CBTX_IRQ_STAT);
+}
+
+static int cbtx_config_intr(struct phy_device *phydev)
+{
+	int ret;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		ret = cbtx_ack_interrupts(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = phy_write(phydev, CBTX_IRQ_ENABLE, CBTX_IRQ_LINK_DOWN |
+				CBTX_IRQ_AN_COMPLETE | CBTX_IRQ_ENERGYON);
+		if (ret)
+			return ret;
+	} else {
+		ret = phy_write(phydev, CBTX_IRQ_ENABLE, 0);
+		if (ret)
+			return ret;
+
+		ret = cbtx_ack_interrupts(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t cbtx_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_stat, irq_enabled;
+
+	irq_stat = cbtx_ack_interrupts(phydev);
+	if (irq_stat < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	irq_enabled = phy_read(phydev, CBTX_IRQ_ENABLE);
+	if (irq_enabled < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_enabled & irq_stat))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int cbtx_get_sset_count(struct phy_device *phydev)
+{
+	return 1;
+}
+
+static void cbtx_get_strings(struct phy_device *phydev, u8 *data)
+{
+	ethtool_puts(&data, "100btx_rx_err");
+}
+
+static void cbtx_get_stats(struct phy_device *phydev,
+			   struct ethtool_stats *stats, u64 *data)
+{
+	int ret;
+
+	ret = phy_read(phydev, CBTX_RX_ERR_COUNTER);
+	data[0] = (ret < 0) ? U64_MAX : ret;
+}
+
+static struct phy_driver cbtx_driver[] = {
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_CBTX_SJA1110),
+		.name			= "NXP CBTX (SJA1110)",
+		/* PHY_BASIC_FEATURES */
+		.soft_reset		= cbtx_soft_reset,
+		.config_init		= cbtx_config_init,
+		.suspend		= genphy_suspend,
+		.resume			= genphy_resume,
+		.config_intr		= cbtx_config_intr,
+		.handle_interrupt	= cbtx_handle_interrupt,
+		.read_status		= cbtx_read_status,
+		.config_aneg		= cbtx_config_aneg,
+		.get_sset_count		= cbtx_get_sset_count,
+		.get_strings		= cbtx_get_strings,
+		.get_stats		= cbtx_get_stats,
+	},
+};
+
+module_phy_driver(cbtx_driver);
+
+static const struct mdio_device_id __maybe_unused cbtx_tbl[] = {
+	{ PHY_ID_MATCH_MODEL(PHY_ID_CBTX_SJA1110) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(mdio, cbtx_tbl);
+
+MODULE_AUTHOR("Vladimir Oltean <vladimir.oltean@nxp.com>");
+MODULE_DESCRIPTION("NXP CBTX PHY driver");
+MODULE_LICENSE("GPL");