Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 168 insertions, 0 deletions

diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
new file mode 100644
index 000000000..d88b1999d
--- /dev/null
+++ b/drivers/net/phy/dp83848.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Texas Instruments DP83848 PHY
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define TI_DP83848C_PHY_ID		0x20005ca0
+#define TI_DP83620_PHY_ID		0x20005ce0
+#define NS_DP83848C_PHY_ID		0x20005c90
+#define TLK10X_PHY_ID			0x2000a210
+
+/* Registers */
+#define DP83848_MICR			0x11 /* MII Interrupt Control Register */
+#define DP83848_MISR			0x12 /* MII Interrupt Status Register */
+
+/* MICR Register Fields */
+#define DP83848_MICR_INT_OE		BIT(0) /* Interrupt Output Enable */
+#define DP83848_MICR_INTEN		BIT(1) /* Interrupt Enable */
+
+/* MISR Register Fields */
+#define DP83848_MISR_RHF_INT_EN		BIT(0) /* Receive Error Counter */
+#define DP83848_MISR_FHF_INT_EN		BIT(1) /* False Carrier Counter */
+#define DP83848_MISR_ANC_INT_EN		BIT(2) /* Auto-negotiation complete */
+#define DP83848_MISR_DUP_INT_EN		BIT(3) /* Duplex Status */
+#define DP83848_MISR_SPD_INT_EN		BIT(4) /* Speed status */
+#define DP83848_MISR_LINK_INT_EN	BIT(5) /* Link status */
+#define DP83848_MISR_ED_INT_EN		BIT(6) /* Energy detect */
+#define DP83848_MISR_LQM_INT_EN		BIT(7) /* Link Quality Monitor */
+
+#define DP83848_INT_EN_MASK		\
+	(DP83848_MISR_ANC_INT_EN |	\
+	 DP83848_MISR_DUP_INT_EN |	\
+	 DP83848_MISR_SPD_INT_EN |	\
+	 DP83848_MISR_LINK_INT_EN)
+
+#define DP83848_MISR_RHF_INT		BIT(8)
+#define DP83848_MISR_FHF_INT		BIT(9)
+#define DP83848_MISR_ANC_INT		BIT(10)
+#define DP83848_MISR_DUP_INT		BIT(11)
+#define DP83848_MISR_SPD_INT		BIT(12)
+#define DP83848_MISR_LINK_INT		BIT(13)
+#define DP83848_MISR_ED_INT		BIT(14)
+
+#define DP83848_INT_MASK		\
+	(DP83848_MISR_ANC_INT |	\
+	 DP83848_MISR_DUP_INT |	\
+	 DP83848_MISR_SPD_INT |	\
+	 DP83848_MISR_LINK_INT)
+
+static int dp83848_ack_interrupt(struct phy_device *phydev)
+{
+	int err = phy_read(phydev, DP83848_MISR);
+
+	return err < 0 ? err : 0;
+}
+
+static int dp83848_config_intr(struct phy_device *phydev)
+{
+	int control, ret;
+
+	control = phy_read(phydev, DP83848_MICR);
+	if (control < 0)
+		return control;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		ret = dp83848_ack_interrupt(phydev);
+		if (ret)
+			return ret;
+
+		control |= DP83848_MICR_INT_OE;
+		control |= DP83848_MICR_INTEN;
+
+		ret = phy_write(phydev, DP83848_MISR, DP83848_INT_EN_MASK);
+		if (ret < 0)
+			return ret;
+
+		ret = phy_write(phydev, DP83848_MICR, control);
+	} else {
+		control &= ~DP83848_MICR_INTEN;
+		ret = phy_write(phydev, DP83848_MICR, control);
+		if (ret)
+			return ret;
+
+		ret = dp83848_ack_interrupt(phydev);
+	}
+
+	return ret;
+}
+
+static irqreturn_t dp83848_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, DP83848_MISR);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & DP83848_INT_MASK))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int dp83848_config_init(struct phy_device *phydev)
+{
+	int val;
+
+	/* DP83620 always reports Auto Negotiation Ability on BMSR. Instead,
+	 * we check initial value of BMCR Auto negotiation enable bit
+	 */
+	val = phy_read(phydev, MII_BMCR);
+	if (!(val & BMCR_ANENABLE))
+		phydev->autoneg = AUTONEG_DISABLE;
+
+	return 0;
+}
+
+static const struct mdio_device_id __maybe_unused dp83848_tbl[] = {
+	{ TI_DP83848C_PHY_ID, 0xfffffff0 },
+	{ NS_DP83848C_PHY_ID, 0xfffffff0 },
+	{ TI_DP83620_PHY_ID, 0xfffffff0 },
+	{ TLK10X_PHY_ID, 0xfffffff0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
+
+#define DP83848_PHY_DRIVER(_id, _name, _config_init)		\
+	{							\
+		.phy_id		= _id,				\
+		.phy_id_mask	= 0xfffffff0,			\
+		.name		= _name,			\
+		/* PHY_BASIC_FEATURES */			\
+								\
+		.soft_reset	= genphy_soft_reset,		\
+		.config_init	= _config_init,			\
+		.suspend	= genphy_suspend,		\
+		.resume		= genphy_resume,		\
+								\
+		/* IRQ related */				\
+		.config_intr	= dp83848_config_intr,		\
+		.handle_interrupt = dp83848_handle_interrupt,	\
+								\
+		.flags		= PHY_RST_AFTER_CLK_EN,		\
+	}
+
+static struct phy_driver dp83848_driver[] = {
+	DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",
+			   NULL),
+	DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
+			   NULL),
+	DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
+			   dp83848_config_init),
+	DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
+			   NULL),
+};
+module_phy_driver(dp83848_driver);
+
+MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_LICENSE("GPL v2");