selftests/bpf: Reject graph kptr use after RCU unlockgrafted

Add a sleepable verifier test that loads a graph-node local kptr in an
explicit RCU read-side critical section, then passes its node to
bpf_rbtree_remove() after the section ends.

Before the verifier fix, the stale NON_OWN_REF flag makes the node look like
a live borrowed reference and the program is accepted. After the fix, the
pointer is demoted without NON_OWN_REF and the graph kfunc argument is
rejected.

Also exercise a graph kptr loaded while a spin lock provides implicit RCU
protection. The pointer must be invalidated when the lock is released, which
guards the required ordering between non-owning-reference invalidation and
RCU demotion.

Update the existing fault-protected load test state description. The
post-unlock pointer no longer carries NON_OWN_REF, but remains readable
because the load is rewritten to use BPF_PROBE_MEM.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260904084325.52250-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

1 files changed, 129 insertions, 0 deletions

diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
new file mode 100644
index 000000000..bba94ce96
--- /dev/null
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ */
+
+#ifndef _LINUX_BCM_PHY_LIB_H
+#define _LINUX_BCM_PHY_LIB_H
+
+#include <linux/brcmphy.h>
+#include <linux/phy.h>
+#include <linux/interrupt.h>
+
+struct ethtool_wolinfo;
+
+/* 28nm only register definitions */
+#define MISC_ADDR(base, channel)	base, channel
+
+#define DSP_TAP10			MISC_ADDR(0x0a, 0)
+#define PLL_PLLCTRL_1			MISC_ADDR(0x32, 1)
+#define PLL_PLLCTRL_2			MISC_ADDR(0x32, 2)
+#define PLL_PLLCTRL_4			MISC_ADDR(0x33, 0)
+
+#define AFE_RXCONFIG_0			MISC_ADDR(0x38, 0)
+#define AFE_RXCONFIG_1			MISC_ADDR(0x38, 1)
+#define AFE_RXCONFIG_2			MISC_ADDR(0x38, 2)
+#define AFE_RX_LP_COUNTER		MISC_ADDR(0x38, 3)
+#define AFE_TX_CONFIG			MISC_ADDR(0x39, 0)
+#define AFE_VDCA_ICTRL_0		MISC_ADDR(0x39, 1)
+#define AFE_VDAC_OTHERS_0		MISC_ADDR(0x39, 3)
+#define AFE_HPF_TRIM_OTHERS		MISC_ADDR(0x3a, 0)
+
+
+int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
+int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set);
+int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set);
+
+static inline int bcm_phy_write_exp_sel(struct phy_device *phydev,
+					u16 reg, u16 val)
+{
+	return bcm_phy_write_exp(phydev, reg | MII_BCM54XX_EXP_SEL_ER, val);
+}
+
+static inline int bcm_phy_read_exp_sel(struct phy_device *phydev, u16 reg)
+{
+	return bcm_phy_read_exp(phydev, reg | MII_BCM54XX_EXP_SEL_ER);
+}
+
+int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val);
+int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum);
+
+int bcm_phy_write_misc(struct phy_device *phydev,
+		       u16 reg, u16 chl, u16 value);
+int bcm_phy_read_misc(struct phy_device *phydev,
+		      u16 reg, u16 chl);
+
+int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
+			 u16 val);
+int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow);
+
+int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val);
+int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val);
+int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb);
+int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb);
+int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask,
+			 u16 set);
+int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask,
+		       u16 set);
+
+int bcm_phy_ack_intr(struct phy_device *phydev);
+int bcm_phy_config_intr(struct phy_device *phydev);
+irqreturn_t bcm_phy_handle_interrupt(struct phy_device *phydev);
+
+int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down);
+
+int bcm_phy_set_eee(struct phy_device *phydev, bool enable);
+
+int bcm_phy_downshift_get(struct phy_device *phydev, u8 *count);
+
+int bcm_phy_downshift_set(struct phy_device *phydev, u8 count);
+
+int bcm_phy_get_sset_count(struct phy_device *phydev);
+void bcm_phy_get_strings(struct phy_device *phydev, u8 *data);
+void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
+		       struct ethtool_stats *stats, u64 *data);
+void bcm_phy_update_stats_shadow(struct phy_device *phydev, u64 *shadow);
+void bcm_phy_r_rc_cal_reset(struct phy_device *phydev);
+int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev);
+int bcm_phy_enable_jumbo(struct phy_device *phydev);
+
+int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev,
+				      bool *finished);
+int bcm_phy_cable_test_start_rdb(struct phy_device *phydev);
+int bcm_phy_cable_test_start(struct phy_device *phydev);
+int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished);
+
+#if IS_ENABLED(CONFIG_BCM_NET_PHYPTP)
+struct bcm_ptp_private *bcm_ptp_probe(struct phy_device *phydev);
+void bcm_ptp_config_init(struct phy_device *phydev);
+void bcm_ptp_stop(struct bcm_ptp_private *priv);
+#else
+static inline struct bcm_ptp_private *bcm_ptp_probe(struct phy_device *phydev)
+{
+	return NULL;
+}
+
+static inline void bcm_ptp_config_init(struct phy_device *phydev)
+{
+}
+
+static inline void bcm_ptp_stop(struct bcm_ptp_private *priv)
+{
+}
+#endif
+
+int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
+void bcm_phy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
+irqreturn_t bcm_phy_wol_isr(int irq, void *dev_id);
+
+int bcm_phy_led_brightness_set(struct phy_device *phydev,
+			       u8 index, enum led_brightness value);
+
+int bcm_setup_lre_master_slave(struct phy_device *phydev);
+int bcm_config_lre_aneg(struct phy_device *phydev, bool changed);
+int bcm_config_lre_advert(struct phy_device *phydev);
+
+#endif /* _LINUX_BCM_PHY_LIB_H */