Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 179 insertions, 0 deletions

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
new file mode 100644
index 000000000..676fb7dff
--- /dev/null
+++ b/drivers/net/dsa/Kconfig
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Distributed Switch Architecture drivers"
+	depends on NET_DSA
+
+source "drivers/net/dsa/b53/Kconfig"
+
+config NET_DSA_BCM_SF2
+	tristate "Broadcom Starfighter 2 Ethernet switch support"
+	depends on HAS_IOMEM
+	select NET_DSA_TAG_BRCM
+	select FIXED_PHY
+	select BCM7XXX_PHY
+	select MDIO_BCM_UNIMAC
+	select B53
+	help
+	  This enables support for the Broadcom Starfighter 2 Ethernet
+	  switch chips.
+
+config NET_DSA_LOOP
+	tristate "DSA mock-up Ethernet switch chip support"
+	select NET_DSA_TAG_NONE
+	select FIXED_PHY
+	help
+	  This enables support for a fake mock-up switch chip which
+	  exercises the DSA APIs.
+
+source "drivers/net/dsa/hirschmann/Kconfig"
+
+source "drivers/net/dsa/lantiq/Kconfig"
+
+config NET_DSA_MT7530
+	tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
+	select NET_DSA_TAG_MTK
+	select REGMAP_IRQ
+	imply NET_DSA_MT7530_MDIO
+	imply NET_DSA_MT7530_MMIO
+	help
+	  This enables support for the MediaTek MT7530 and MT7531 Ethernet
+	  switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
+	  MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
+	  supported as well.
+
+config NET_DSA_MT7530_MDIO
+	tristate "MediaTek MT7530 MDIO interface driver"
+	depends on NET_DSA_MT7530
+	select MEDIATEK_GE_PHY
+	select PCS_MTK_LYNXI
+	help
+	  This enables support for the MediaTek MT7530 and MT7531 switch
+	  chips which are connected via MDIO, as well as multi-chip
+	  module MT7530 which can be found in the MT7621AT, MT7621DAT,
+	  MT7621ST and MT7623AI SoCs.
+
+config NET_DSA_MT7530_MMIO
+	tristate "MediaTek MT7530 MMIO interface driver"
+	depends on NET_DSA_MT7530
+	depends on HAS_IOMEM
+	imply MEDIATEK_GE_SOC_PHY
+	help
+	  This enables support for the built-in Ethernet switch found
+	  in the MediaTek MT7988 SoC.
+	  The switch is a similar design as MT7531, but the switch registers
+	  are directly mapped into the SoCs register space rather than being
+	  accessible via MDIO.
+
+config NET_DSA_MT7628
+	tristate "MediaTek MT7628 Embedded Ethernet switch support"
+	depends on HAS_IOMEM && (SOC_MT7620 || COMPILE_TEST)
+	select NET_DSA_TAG_MT7628
+	select MEDIATEK_FE_SOC_PHY
+	select REGMAP_MMIO
+	help
+	  This enables support for the built-in Ethernet switch found
+	  in the MT7628 SoC.
+
+config NET_DSA_MV88E6060
+	tristate "Marvell 88E6060 ethernet switch chip support"
+	select NET_DSA_TAG_TRAILER
+	help
+	  This enables support for the Marvell 88E6060 ethernet switch
+	  chip.
+
+source "drivers/net/dsa/microchip/Kconfig"
+
+source "drivers/net/dsa/mv88e6xxx/Kconfig"
+
+source "drivers/net/dsa/mxl862xx/Kconfig"
+
+source "drivers/net/dsa/netc/Kconfig"
+
+source "drivers/net/dsa/ocelot/Kconfig"
+
+source "drivers/net/dsa/qca/Kconfig"
+
+source "drivers/net/dsa/sja1105/Kconfig"
+
+source "drivers/net/dsa/xrs700x/Kconfig"
+
+source "drivers/net/dsa/realtek/Kconfig"
+
+config NET_DSA_RZN1_A5PSW
+	tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
+	depends on OF && (ARCH_RZN1 || COMPILE_TEST)
+	select NET_DSA_TAG_RZN1_A5PSW
+	select PCS_RZN1_MIIC
+	help
+	  This driver supports the A5PSW switch, which is embedded in Renesas
+	  RZ/N1 SoC.
+
+config NET_DSA_KS8995
+	tristate "Micrel KS8995 family 5-ports 10/100 Ethernet switches"
+	depends on SPI
+	select NET_DSA_TAG_NONE
+	help
+	  This driver supports the Micrel KS8995 family of 10/100 Mbit ethernet
+	  switches, managed over SPI.
+
+config NET_DSA_SMSC_LAN9303
+	tristate
+	select NET_DSA_TAG_LAN9303
+	select REGMAP
+	imply SMSC_PHY
+	help
+	  This enables support for the Microchip LAN9303/LAN9354 3 port ethernet
+	  switch chips.
+
+config NET_DSA_SMSC_LAN9303_I2C
+	tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
+	depends on I2C
+	depends on VLAN_8021Q || VLAN_8021Q=n
+	select NET_DSA_SMSC_LAN9303
+	select REGMAP_I2C
+	help
+	  Enable access functions if the SMSC/Microchip LAN9303 is configured
+	  for I2C managed mode.
+
+config NET_DSA_SMSC_LAN9303_MDIO
+	tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode"
+	select NET_DSA_SMSC_LAN9303
+	depends on VLAN_8021Q || VLAN_8021Q=n
+	help
+	  Enable access functions if the Microchip LAN9303/LAN9354 is configured
+	  for MDIO managed mode.
+
+config NET_DSA_VITESSE_VSC73XX
+	tristate
+	select NET_DSA_TAG_VSC73XX_8021Q
+	select FIXED_PHY
+	select VITESSE_PHY
+	select GPIOLIB
+	help
+	  This enables support for the Vitesse VSC7385, VSC7388,
+	  VSC7395 and VSC7398 SparX integrated ethernet switches.
+
+config NET_DSA_VITESSE_VSC73XX_SPI
+	tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
+	depends on SPI
+	select NET_DSA_VITESSE_VSC73XX
+	help
+	  This enables support for the Vitesse VSC7385, VSC7388, VSC7395
+	  and VSC7398 SparX integrated ethernet switches in SPI managed mode.
+
+config NET_DSA_VITESSE_VSC73XX_PLATFORM
+	tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
+	depends on HAS_IOMEM
+	select NET_DSA_VITESSE_VSC73XX
+	help
+	  This enables support for the Vitesse VSC7385, VSC7388, VSC7395
+	  and VSC7398 SparX integrated ethernet switches, connected over
+	  a CPU-attached address bus and work in memory-mapped I/O mode.
+
+config NET_DSA_YT921X
+	tristate "Motorcomm YT9215 ethernet switch chip support"
+	select NET_DSA_TAG_YT921X
+	select NET_IEEE8021Q_HELPERS if DCB
+	help
+	  This enables support for the Motorcomm YT9215 ethernet switch
+	  chip.
+endmenu