ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 243 insertions, 0 deletions

diff --git a/drivers/net/arcnet/rfc1051.c b/drivers/net/arcnet/rfc1051.c
new file mode 100644
index 000000000..46519ca63
--- /dev/null
+++ b/drivers/net/arcnet/rfc1051.c
@@ -0,0 +1,243 @@
+/*
+ * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
+ *
+ * Written 1994-1999 by Avery Pennarun.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ *  for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/if_arp.h>
+#include <net/arp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+
+#include "arcdevice.h"
+
+static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
+static void rx(struct net_device *dev, int bufnum,
+	       struct archdr *pkthdr, int length);
+static int build_header(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, uint8_t daddr);
+static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
+		      int bufnum);
+
+static struct ArcProto rfc1051_proto = {
+	.suffix		= 's',
+	.mtu		= XMTU - RFC1051_HDR_SIZE,
+	.is_ip          = 1,
+	.rx		= rx,
+	.build_header	= build_header,
+	.prepare_tx	= prepare_tx,
+	.continue_tx    = NULL,
+	.ack_tx         = NULL
+};
+
+static int __init arcnet_rfc1051_init(void)
+{
+	pr_info("%s\n", "RFC1051 \"simple standard\" (`s') encapsulation support loaded");
+
+	arc_proto_map[ARC_P_IP_RFC1051]
+	    = arc_proto_map[ARC_P_ARP_RFC1051]
+	    = &rfc1051_proto;
+
+	/* if someone else already owns the broadcast, we won't take it */
+	if (arc_bcast_proto == arc_proto_default)
+		arc_bcast_proto = &rfc1051_proto;
+
+	return 0;
+}
+
+static void __exit arcnet_rfc1051_exit(void)
+{
+	arcnet_unregister_proto(&rfc1051_proto);
+}
+
+module_init(arcnet_rfc1051_init);
+module_exit(arcnet_rfc1051_exit);
+
+MODULE_DESCRIPTION("ARCNet packet format (RFC 1051) module");
+MODULE_LICENSE("GPL");
+
+/* Determine a packet's protocol ID.
+ *
+ * With ARCnet we have to convert everything to Ethernet-style stuff.
+ */
+static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
+{
+	struct archdr *pkt = (struct archdr *)skb->data;
+	struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
+	int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
+
+	/* Pull off the arcnet header. */
+	skb_reset_mac_header(skb);
+	skb_pull(skb, hdr_size);
+
+	if (pkt->hard.dest == 0) {
+		skb->pkt_type = PACKET_BROADCAST;
+	} else if (dev->flags & IFF_PROMISC) {
+		/* if we're not sending to ourselves :) */
+		if (pkt->hard.dest != dev->dev_addr[0])
+			skb->pkt_type = PACKET_OTHERHOST;
+	}
+	/* now return the protocol number */
+	switch (soft->proto) {
+	case ARC_P_IP_RFC1051:
+		return htons(ETH_P_IP);
+	case ARC_P_ARP_RFC1051:
+		return htons(ETH_P_ARP);
+
+	default:
+		dev->stats.rx_errors++;
+		dev->stats.rx_crc_errors++;
+		return 0;
+	}
+
+	return htons(ETH_P_IP);
+}
+
+/* packet receiver */
+static void rx(struct net_device *dev, int bufnum,
+	       struct archdr *pkthdr, int length)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct sk_buff *skb;
+	struct archdr *pkt = pkthdr;
+	int ofs;
+
+	arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length);
+
+	if (length >= MinTU)
+		ofs = 512 - length;
+	else
+		ofs = 256 - length;
+
+	skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
+	if (!skb) {
+		dev->stats.rx_dropped++;
+		return;
+	}
+	skb_put(skb, length + ARC_HDR_SIZE);
+	skb->dev = dev;
+
+	pkt = (struct archdr *)skb->data;
+
+	/* up to sizeof(pkt->soft) has already been copied from the card */
+	memcpy(pkt, pkthdr, sizeof(struct archdr));
+	if (length > sizeof(pkt->soft))
+		lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
+				      pkt->soft.raw + sizeof(pkt->soft),
+				      length - sizeof(pkt->soft));
+
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, skb, "rx");
+
+	skb->protocol = type_trans(skb, dev);
+	netif_rx(skb);
+}
+
+/* Create the ARCnet hard/soft headers for RFC1051 */
+static int build_header(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, uint8_t daddr)
+{
+	int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
+	struct archdr *pkt = skb_push(skb, hdr_size);
+	struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
+
+	/* set the protocol ID according to RFC1051 */
+	switch (type) {
+	case ETH_P_IP:
+		soft->proto = ARC_P_IP_RFC1051;
+		break;
+	case ETH_P_ARP:
+		soft->proto = ARC_P_ARP_RFC1051;
+		break;
+	default:
+		arc_printk(D_NORMAL, dev, "RFC1051: I don't understand protocol %d (%Xh)\n",
+			   type, type);
+		dev->stats.tx_errors++;
+		dev->stats.tx_aborted_errors++;
+		return 0;
+	}
+
+	/* Set the source hardware address.
+	 *
+	 * This is pretty pointless for most purposes, but it can help in
+	 * debugging.  ARCnet does not allow us to change the source address
+	 * in the actual packet sent.
+	 */
+	pkt->hard.source = *dev->dev_addr;
+
+	/* see linux/net/ethernet/eth.c to see where I got the following */
+
+	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
+		/* FIXME: fill in the last byte of the dest ipaddr here to
+		 * better comply with RFC1051 in "noarp" mode.
+		 */
+		pkt->hard.dest = 0;
+		return hdr_size;
+	}
+	/* otherwise, just fill it in and go! */
+	pkt->hard.dest = daddr;
+
+	return hdr_size;	/* success */
+}
+
+static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
+		      int bufnum)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct arc_hardware *hard = &pkt->hard;
+	int ofs;
+
+	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+		   lp->next_tx, lp->cur_tx, bufnum);
+
+	/* hard header is not included in packet length */
+	length -= ARC_HDR_SIZE;
+
+	if (length > XMTU) {
+		/* should never happen! other people already check for this. */
+		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n",
+			   length, XMTU);
+		length = XMTU;
+	}
+	if (length > MinTU) {
+		hard->offset[0] = 0;
+		hard->offset[1] = ofs = 512 - length;
+	} else if (length > MTU) {
+		hard->offset[0] = 0;
+		hard->offset[1] = ofs = 512 - length - 3;
+	} else {
+		hard->offset[0] = ofs = 256 - length;
+	}
+
+	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
+	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
+
+	lp->lastload_dest = hard->dest;
+
+	return 1;		/* done */
+}