Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 269 insertions, 0 deletions

diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c
new file mode 100644
index 000000000..7a0a79973
--- /dev/null
+++ b/drivers/net/arcnet/capmode.c
@@ -0,0 +1,269 @@
+/*
+ * Linux ARCnet driver - "cap mode" packet encapsulation.
+ * It adds sequence numbers to packets for communicating between a user space
+ * application and the driver. After a transmit it sends a packet with protocol
+ * byte 0 back up to the userspace containing the sequence number of the packet
+ * plus the transmit-status on the ArcNet.
+ *
+ * Written 2002-4 by Esben Nielsen, Vestas Wind Systems A/S
+ * Derived from arc-rawmode.c by Avery Pennarun.
+ * arc-rawmode was in turned based on skeleton.c, see below.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/if_arp.h>
+#include <net/arp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+
+#include "arcdevice.h"
+
+/* packet receiver */
+static void rx(struct net_device *dev, int bufnum,
+	       struct archdr *pkthdr, int length)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct sk_buff *skb;
+	struct archdr *pkt;
+	char *pktbuf, *pkthdrbuf;
+	int ofs;
+
+	arc_printk(D_DURING, dev, "it's a raw(cap) packet (length=%d)\n",
+		   length);
+
+	if (length >= MinTU)
+		ofs = 512 - length;
+	else
+		ofs = 256 - length;
+
+	skb = alloc_skb(length + ARC_HDR_SIZE + sizeof(int), GFP_ATOMIC);
+	if (!skb) {
+		dev->stats.rx_dropped++;
+		return;
+	}
+	skb_put(skb, length + ARC_HDR_SIZE + sizeof(int));
+	skb->dev = dev;
+	skb_reset_mac_header(skb);
+	pkt = (struct archdr *)skb_mac_header(skb);
+	skb_pull(skb, ARC_HDR_SIZE);
+
+	/* up to sizeof(pkt->soft) has already been copied from the card
+	 * squeeze in an int for the cap encapsulation
+	 * use these variables to be sure we count in bytes, not in
+	 * sizeof(struct archdr)
+	 */
+	pktbuf = (char *)pkt;
+	pkthdrbuf = (char *)pkthdr;
+	memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto));
+	memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int),
+	       pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto),
+	       sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto));
+
+	if (length > sizeof(pkt->soft))
+		lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
+				      pkt->soft.raw + sizeof(pkt->soft)
+				      + sizeof(int),
+				      length - sizeof(pkt->soft));
+
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, skb, "rx");
+
+	skb->protocol = cpu_to_be16(ETH_P_ARCNET);
+	netif_rx(skb);
+}
+
+/* Create the ARCnet hard/soft headers for cap mode.
+ * There aren't any soft headers in cap mode - not even the protocol id.
+ */
+static int build_header(struct sk_buff *skb,
+			struct net_device *dev,
+			unsigned short type,
+			uint8_t daddr)
+{
+	int hdr_size = ARC_HDR_SIZE;
+	struct archdr *pkt = skb_push(skb, hdr_size);
+
+	arc_printk(D_PROTO, dev, "Preparing header for cap packet %x.\n",
+		   *((int *)&pkt->soft.cap.cookie[0]));
+
+	/* Set the source hardware address.
+	 *
+	 * This is pretty pointless for most purposes, but it can help in
+	 * debugging.  ARCnet does not allow us to change the source address in
+	 * the actual packet sent)
+	 */
+	pkt->hard.source = *dev->dev_addr;
+
+	/* see linux/net/ethernet/eth.c to see where I got the following */
+
+	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
+		/* FIXME: fill in the last byte of the dest ipaddr here to
+		 * better comply with RFC1051 in "noarp" mode.
+		 */
+		pkt->hard.dest = 0;
+		return hdr_size;
+	}
+	/* otherwise, just fill it in and go! */
+	pkt->hard.dest = daddr;
+
+	return hdr_size;	/* success */
+}
+
+static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
+		      int bufnum)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct arc_hardware *hard = &pkt->hard;
+	int ofs;
+
+	/* hard header is not included in packet length */
+	length -= ARC_HDR_SIZE;
+	/* And neither is the cookie field */
+	length -= sizeof(int);
+
+	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+		   lp->next_tx, lp->cur_tx, bufnum);
+
+	arc_printk(D_PROTO, dev, "Sending for cap packet %x.\n",
+		   *((int *)&pkt->soft.cap.cookie[0]));
+
+	if (length > XMTU) {
+		/* should never happen! other people already check for this. */
+		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n",
+			   length, XMTU);
+		length = XMTU;
+	}
+	if (length > MinTU) {
+		hard->offset[0] = 0;
+		hard->offset[1] = ofs = 512 - length;
+	} else if (length > MTU) {
+		hard->offset[0] = 0;
+		hard->offset[1] = ofs = 512 - length - 3;
+	} else {
+		hard->offset[0] = ofs = 256 - length;
+	}
+
+	arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n",
+		   length, ofs);
+
+	/* Copy the arcnet-header + the protocol byte down: */
+	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
+	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft.cap.proto,
+			    sizeof(pkt->soft.cap.proto));
+
+	/* Skip the extra integer we have written into it as a cookie
+	 * but write the rest of the message:
+	 */
+	lp->hw.copy_to_card(dev, bufnum, ofs + 1,
+			    ((unsigned char *)&pkt->soft.cap.mes), length - 1);
+
+	lp->lastload_dest = hard->dest;
+
+	return 1;	/* done */
+}
+
+static int ack_tx(struct net_device *dev, int acked)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct sk_buff *ackskb;
+	struct archdr *ackpkt;
+	int length = sizeof(struct arc_cap);
+
+	arc_printk(D_DURING, dev, "capmode: ack_tx: protocol: %x: result: %d\n",
+		   lp->outgoing.skb->protocol, acked);
+
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx");
+
+	/* Now alloc a skb to send back up through the layers: */
+	ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
+	if (!ackskb)
+		goto free_outskb;
+
+	skb_put(ackskb, length + ARC_HDR_SIZE);
+	ackskb->dev = dev;
+
+	skb_reset_mac_header(ackskb);
+	ackpkt = (struct archdr *)skb_mac_header(ackskb);
+	/* skb_pull(ackskb, ARC_HDR_SIZE); */
+
+	skb_copy_from_linear_data(lp->outgoing.skb, ackpkt,
+				  ARC_HDR_SIZE + sizeof(struct arc_cap));
+	ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */
+	ackpkt->soft.cap.mes.ack = acked;
+
+	arc_printk(D_PROTO, dev, "Acknowledge for cap packet %x.\n",
+		   *((int *)&ackpkt->soft.cap.cookie[0]));
+
+	ackskb->protocol = cpu_to_be16(ETH_P_ARCNET);
+
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, ackskb, "ack_tx_recv");
+	netif_rx(ackskb);
+
+free_outskb:
+	dev_kfree_skb_irq(lp->outgoing.skb);
+	lp->outgoing.proto = NULL;
+			/* We are always finished when in this protocol */
+
+	return 0;
+}
+
+static struct ArcProto capmode_proto = {
+	.suffix		= 'r',
+	.mtu		= XMTU,
+	.rx		= rx,
+	.build_header	= build_header,
+	.prepare_tx	= prepare_tx,
+	.ack_tx		= ack_tx
+};
+
+static int __init capmode_module_init(void)
+{
+	int count;
+
+	pr_info("cap mode (`c') encapsulation support loaded\n");
+
+	for (count = 1; count <= 8; count++)
+		if (arc_proto_map[count] == arc_proto_default)
+			arc_proto_map[count] = &capmode_proto;
+
+	/* for cap mode, we only set the bcast proto if there's no better one */
+	if (arc_bcast_proto == arc_proto_default)
+		arc_bcast_proto = &capmode_proto;
+
+	arc_proto_default = &capmode_proto;
+	arc_raw_proto = &capmode_proto;
+
+	return 0;
+}
+
+static void __exit capmode_module_exit(void)
+{
+	arcnet_unregister_proto(&capmode_proto);
+}
+module_init(capmode_module_init);
+module_exit(capmode_module_exit);
+
+MODULE_DESCRIPTION("ARCnet CAP mode packet interface module");
+MODULE_LICENSE("GPL");