Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 190 insertions, 0 deletions

diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c
new file mode 100644
index 000000000..57f172906
--- /dev/null
+++ b/drivers/net/arcnet/arc-rawmode.c
@@ -0,0 +1,190 @@
+/*
+ * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
+ *
+ * Written 1994-1999 by Avery Pennarun.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ *  for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/if_arp.h>
+#include <net/arp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include "arcdevice.h"
+
+/* packet receiver */
+static void rx(struct net_device *dev, int bufnum,
+	       struct archdr *pkthdr, int length)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct sk_buff *skb;
+	struct archdr *pkt = pkthdr;
+	int ofs;
+
+	arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length);
+
+	if (length > MTU)
+		ofs = 512 - length;
+	else
+		ofs = 256 - length;
+
+	skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
+	if (!skb) {
+		dev->stats.rx_dropped++;
+		return;
+	}
+	skb_put(skb, length + ARC_HDR_SIZE);
+	skb->dev = dev;
+
+	pkt = (struct archdr *)skb->data;
+
+	skb_reset_mac_header(skb);
+	skb_pull(skb, ARC_HDR_SIZE);
+
+	/* up to sizeof(pkt->soft) has already been copied from the card */
+	memcpy(pkt, pkthdr, sizeof(struct archdr));
+	if (length > sizeof(pkt->soft))
+		lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
+				      pkt->soft.raw + sizeof(pkt->soft),
+				      length - sizeof(pkt->soft));
+
+	if (BUGLVL(D_SKB))
+		arcnet_dump_skb(dev, skb, "rx");
+
+	skb->protocol = cpu_to_be16(ETH_P_ARCNET);
+	netif_rx(skb);
+}
+
+/* Create the ARCnet hard/soft headers for raw mode.
+ * There aren't any soft headers in raw mode - not even the protocol id.
+ */
+static int build_header(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, uint8_t daddr)
+{
+	int hdr_size = ARC_HDR_SIZE;
+	struct archdr *pkt = skb_push(skb, hdr_size);
+
+	/* Set the source hardware address.
+	 *
+	 * This is pretty pointless for most purposes, but it can help in
+	 * debugging.  ARCnet does not allow us to change the source address
+	 * in the actual packet sent.
+	 */
+	pkt->hard.source = *dev->dev_addr;
+
+	/* see linux/net/ethernet/eth.c to see where I got the following */
+
+	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
+		/* FIXME: fill in the last byte of the dest ipaddr here
+		 * to better comply with RFC1051 in "noarp" mode.
+		 */
+		pkt->hard.dest = 0;
+		return hdr_size;
+	}
+	/* otherwise, just fill it in and go! */
+	pkt->hard.dest = daddr;
+
+	return hdr_size;	/* success */
+}
+
+static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
+		      int bufnum)
+{
+	struct arcnet_local *lp = netdev_priv(dev);
+	struct arc_hardware *hard = &pkt->hard;
+	int ofs;
+
+	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+		   lp->next_tx, lp->cur_tx, bufnum);
+
+	/* hard header is not included in packet length */
+	length -= ARC_HDR_SIZE;
+
+	if (length > XMTU) {
+		/* should never happen! other people already check for this. */
+		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n",
+			   length, XMTU);
+		length = XMTU;
+	}
+	if (length >= MinTU) {
+		hard->offset[0] = 0;
+		hard->offset[1] = ofs = 512 - length;
+	} else if (length > MTU) {
+		hard->offset[0] = 0;
+		hard->offset[1] = ofs = 512 - length - 3;
+	} else {
+		hard->offset[0] = ofs = 256 - length;
+	}
+
+	arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n",
+		   length, ofs);
+
+	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
+	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
+
+	lp->lastload_dest = hard->dest;
+
+	return 1;		/* done */
+}
+
+static struct ArcProto rawmode_proto = {
+	.suffix		= 'r',
+	.mtu		= XMTU,
+	.rx		= rx,
+	.build_header	= build_header,
+	.prepare_tx	= prepare_tx,
+	.continue_tx    = NULL,
+	.ack_tx         = NULL
+};
+
+static int __init arcnet_raw_init(void)
+{
+	int count;
+
+	pr_info("raw mode (`r') encapsulation support loaded\n");
+
+	for (count = 0; count < 256; count++)
+		if (arc_proto_map[count] == arc_proto_default)
+			arc_proto_map[count] = &rawmode_proto;
+
+	/* for raw mode, we only set the bcast proto if there's no better one */
+	if (arc_bcast_proto == arc_proto_default)
+		arc_bcast_proto = &rawmode_proto;
+
+	arc_proto_default = &rawmode_proto;
+	return 0;
+}
+
+static void __exit arcnet_raw_exit(void)
+{
+	arcnet_unregister_proto(&rawmode_proto);
+}
+
+module_init(arcnet_raw_init);
+module_exit(arcnet_raw_exit);
+
+MODULE_DESCRIPTION("ARCnet raw mode packet interface module");
+MODULE_LICENSE("GPL");