KVM: Don't pre-reserve xarray entries when storing empty/NULL attributesgrafted

Skip the xarray reservation loop when clearing all memory attributes, as
storing NULL only erases the entry and never needs to allocate, so no
reservation (and no cleanup of a failed one) is required in that case.

Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: David Ballesteros <davimaba.v@proton.me>
Signed-off-by: Zeng Chi <zengchi@kylinos.cn>
Link: https://patch.msgid.link/20260921102442.1232375-1-zeng_chi911@163.com
[sean: split to separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>

1 files changed, 86 insertions, 0 deletions

diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
new file mode 100644
index 000000000..4611a3716
--- /dev/null
+++ b/drivers/net/arcnet/Kconfig
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Arcnet configuration
+#
+
+menuconfig ARCNET
+	depends on NETDEVICES && PCI && HAS_IOPORT
+	tristate "ARCnet support"
+	help
+	  If you have a network card of this type, say Y and check out the
+	  (arguably) beautiful poetry in
+	  <file:Documentation/networking/arcnet.rst>.
+
+	  You need both this driver, and the driver for the particular ARCnet
+	  chipset of your card.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called arcnet.
+
+if ARCNET
+
+config ARCNET_1201
+	tristate "Enable standard ARCNet packet format (RFC 1201)"
+	help
+	  This allows you to use RFC1201 with your ARCnet card via the virtual
+	  arc0 device.  You need to say Y here to communicate with
+	  industry-standard RFC1201 implementations, like the arcether.com
+	  packet driver or most DOS/Windows ODI drivers.  Please read the
+	  ARCnet documentation in <file:Documentation/networking/arcnet.rst>
+	  for more information about using arc0.
+
+config ARCNET_1051
+	tristate "Enable old ARCNet packet format (RFC 1051)"
+	help
+	  This allows you to use RFC1051 with your ARCnet card via the virtual
+	  arc0s device. You only need arc0s if you want to talk to ARCnet
+	  software complying with the "old" standard, specifically, the DOS
+	  arcnet.com packet driver, Amigas running AmiTCP, and some variants
+	  of NetBSD. You do not need to say Y here to communicate with
+	  industry-standard RFC1201 implementations, like the arcether.com
+	  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
+	  automatically as the arc0 device. Please read the ARCnet
+	  documentation in <file:Documentation/networking/arcnet.rst> for more
+	  information about using arc0e and arc0s.
+
+config ARCNET_RAW
+	tristate "Enable raw mode packet interface"
+	help
+	  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
+	  to work unless talking to a copy of the same Linux arcnet driver,
+	  but perhaps marginally faster in that case.
+
+config ARCNET_CAP
+	tristate "Enable CAP mode packet interface"
+	help
+	  ARCnet "cap mode" packet encapsulation. Used to get the hardware
+	  acknowledge back to userspace. After the initial protocol byte every
+	  packet is stuffed with an extra 4 byte "cookie" which doesn't
+	  actually appear on the network. After transmit the driver will send
+	  back a packet with protocol byte 0 containing the status of the
+	  transmission:
+	     0=no hardware acknowledge
+	     1=excessive nak
+	     2=transmission accepted by the receiver hardware
+
+	  Received packets are also stuffed with the extra 4 bytes but it will
+	  be random data.
+
+	  Cap only listens to protocol 1-8.
+
+config ARCNET_COM20020
+	tristate "ARCnet COM20020 chipset driver"
+	depends on LEDS_CLASS
+	help
+	  This is the driver for the new COM20020 chipset. It supports such
+	  things as promiscuous mode, so packet sniffing is possible, and
+	  extra diagnostic information.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called com20020.
+
+config ARCNET_COM20020_PCI
+	tristate "Support for COM20020 on PCI"
+	depends on ARCNET_COM20020 && PCI
+
+endif # ARCNET