Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 418 insertions, 0 deletions

diff --git a/drivers/mtd/tests/speedtest.c b/drivers/mtd/tests/speedtest.c
new file mode 100644
index 000000000..075bce32c
--- /dev/null
+++ b/drivers/mtd/tests/speedtest.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Test read and write speed of a MTD device.
+ *
+ * Author: Adrian Hunter <adrian.hunter@nokia.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/err.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/random.h>
+
+#include "mtd_test.h"
+
+static int dev = -EINVAL;
+module_param(dev, int, S_IRUGO);
+MODULE_PARM_DESC(dev, "MTD device number to use");
+
+static int count;
+module_param(count, int, S_IRUGO);
+MODULE_PARM_DESC(count, "Maximum number of eraseblocks to use "
+			"(0 means use all)");
+
+static struct mtd_info *mtd;
+static unsigned char *iobuf;
+static unsigned char *bbt;
+
+static int pgsize;
+static int ebcnt;
+static int pgcnt;
+static int goodebcnt;
+static ktime_t start, finish;
+
+static int multiblock_erase(int ebnum, int blocks)
+{
+	int err;
+	struct erase_info ei;
+	loff_t addr = (loff_t)ebnum * mtd->erasesize;
+
+	memset(&ei, 0, sizeof(struct erase_info));
+	ei.addr = addr;
+	ei.len  = mtd->erasesize * blocks;
+
+	err = mtd_erase(mtd, &ei);
+	if (err) {
+		pr_err("error %d while erasing EB %d, blocks %d\n",
+		       err, ebnum, blocks);
+		return err;
+	}
+
+	return 0;
+}
+
+static int write_eraseblock(int ebnum)
+{
+	loff_t addr = (loff_t)ebnum * mtd->erasesize;
+
+	return mtdtest_write(mtd, addr, mtd->erasesize, iobuf);
+}
+
+static int write_eraseblock_by_page(int ebnum)
+{
+	int i, err = 0;
+	loff_t addr = (loff_t)ebnum * mtd->erasesize;
+	void *buf = iobuf;
+
+	for (i = 0; i < pgcnt; i++) {
+		err = mtdtest_write(mtd, addr, pgsize, buf);
+		if (err)
+			break;
+		addr += pgsize;
+		buf += pgsize;
+	}
+
+	return err;
+}
+
+static int write_eraseblock_by_2pages(int ebnum)
+{
+	size_t sz = pgsize * 2;
+	int i, n = pgcnt / 2, err = 0;
+	loff_t addr = (loff_t)ebnum * mtd->erasesize;
+	void *buf = iobuf;
+
+	for (i = 0; i < n; i++) {
+		err = mtdtest_write(mtd, addr, sz, buf);
+		if (err)
+			return err;
+		addr += sz;
+		buf += sz;
+	}
+	if (pgcnt % 2)
+		err = mtdtest_write(mtd, addr, pgsize, buf);
+
+	return err;
+}
+
+static int read_eraseblock(int ebnum)
+{
+	loff_t addr = (loff_t)ebnum * mtd->erasesize;
+
+	return mtdtest_read(mtd, addr, mtd->erasesize, iobuf);
+}
+
+static int read_eraseblock_by_page(int ebnum)
+{
+	int i, err = 0;
+	loff_t addr = (loff_t)ebnum * mtd->erasesize;
+	void *buf = iobuf;
+
+	for (i = 0; i < pgcnt; i++) {
+		err = mtdtest_read(mtd, addr, pgsize, buf);
+		if (err)
+			break;
+		addr += pgsize;
+		buf += pgsize;
+	}
+
+	return err;
+}
+
+static int read_eraseblock_by_2pages(int ebnum)
+{
+	size_t sz = pgsize * 2;
+	int i, n = pgcnt / 2, err = 0;
+	loff_t addr = (loff_t)ebnum * mtd->erasesize;
+	void *buf = iobuf;
+
+	for (i = 0; i < n; i++) {
+		err = mtdtest_read(mtd, addr, sz, buf);
+		if (err)
+			return err;
+		addr += sz;
+		buf += sz;
+	}
+	if (pgcnt % 2)
+		err = mtdtest_read(mtd, addr, pgsize, buf);
+
+	return err;
+}
+
+static inline void start_timing(void)
+{
+	start = ktime_get();
+}
+
+static inline void stop_timing(void)
+{
+	finish = ktime_get();
+}
+
+static long calc_speed(void)
+{
+	uint64_t k, us;
+
+	us = ktime_us_delta(finish, start);
+	if (us == 0)
+		return 0;
+	k = (uint64_t)goodebcnt * (mtd->erasesize / 1024) * 1000000;
+	do_div(k, us);
+	return k;
+}
+
+static int __init mtd_speedtest_init(void)
+{
+	int err, i, blocks, j, k;
+	long speed;
+	uint64_t tmp;
+
+	printk(KERN_INFO "\n");
+	printk(KERN_INFO "=================================================\n");
+
+	if (dev < 0) {
+		pr_info("Please specify a valid mtd-device via module parameter\n");
+		pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
+	if (count)
+		pr_info("MTD device: %d    count: %d\n", dev, count);
+	else
+		pr_info("MTD device: %d\n", dev);
+
+	mtd = get_mtd_device(NULL, dev);
+	if (IS_ERR(mtd)) {
+		err = PTR_ERR(mtd);
+		pr_err("error: cannot get MTD device\n");
+		return err;
+	}
+
+	if (mtd->writesize == 1) {
+		pr_info("not NAND flash, assume page size is 512 "
+		       "bytes.\n");
+		pgsize = 512;
+	} else
+		pgsize = mtd->writesize;
+
+	tmp = mtd->size;
+	do_div(tmp, mtd->erasesize);
+	ebcnt = tmp;
+	pgcnt = mtd->erasesize / pgsize;
+
+	pr_info("MTD device size %llu, eraseblock size %u, "
+	       "page size %u, count of eraseblocks %u, pages per "
+	       "eraseblock %u, OOB size %u\n",
+	       (unsigned long long)mtd->size, mtd->erasesize,
+	       pgsize, ebcnt, pgcnt, mtd->oobsize);
+
+	if (count > 0 && count < ebcnt)
+		ebcnt = count;
+
+	err = -ENOMEM;
+	iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
+	if (!iobuf)
+		goto out;
+
+	get_random_bytes(iobuf, mtd->erasesize);
+
+	bbt = kzalloc(ebcnt, GFP_KERNEL);
+	if (!bbt)
+		goto out;
+	err = mtdtest_scan_for_bad_eraseblocks(mtd, bbt, 0, ebcnt);
+	if (err)
+		goto out;
+	for (i = 0; i < ebcnt; i++) {
+		if (!bbt[i])
+			goodebcnt++;
+	}
+
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
+	if (err)
+		goto out;
+
+	/* Write all eraseblocks, 1 eraseblock at a time */
+	pr_info("testing eraseblock write speed\n");
+	start_timing();
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = write_eraseblock(i);
+		if (err)
+			goto out;
+
+		err = mtdtest_relax();
+		if (err)
+			goto out;
+	}
+	stop_timing();
+	speed = calc_speed();
+	pr_info("eraseblock write speed is %ld KiB/s\n", speed);
+
+	/* Read all eraseblocks, 1 eraseblock at a time */
+	pr_info("testing eraseblock read speed\n");
+	start_timing();
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = read_eraseblock(i);
+		if (err)
+			goto out;
+
+		err = mtdtest_relax();
+		if (err)
+			goto out;
+	}
+	stop_timing();
+	speed = calc_speed();
+	pr_info("eraseblock read speed is %ld KiB/s\n", speed);
+
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
+	if (err)
+		goto out;
+
+	/* Write all eraseblocks, 1 page at a time */
+	pr_info("testing page write speed\n");
+	start_timing();
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = write_eraseblock_by_page(i);
+		if (err)
+			goto out;
+
+		err = mtdtest_relax();
+		if (err)
+			goto out;
+	}
+	stop_timing();
+	speed = calc_speed();
+	pr_info("page write speed is %ld KiB/s\n", speed);
+
+	/* Read all eraseblocks, 1 page at a time */
+	pr_info("testing page read speed\n");
+	start_timing();
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = read_eraseblock_by_page(i);
+		if (err)
+			goto out;
+
+		err = mtdtest_relax();
+		if (err)
+			goto out;
+	}
+	stop_timing();
+	speed = calc_speed();
+	pr_info("page read speed is %ld KiB/s\n", speed);
+
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
+	if (err)
+		goto out;
+
+	/* Write all eraseblocks, 2 pages at a time */
+	pr_info("testing 2 page write speed\n");
+	start_timing();
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = write_eraseblock_by_2pages(i);
+		if (err)
+			goto out;
+
+		err = mtdtest_relax();
+		if (err)
+			goto out;
+	}
+	stop_timing();
+	speed = calc_speed();
+	pr_info("2 page write speed is %ld KiB/s\n", speed);
+
+	/* Read all eraseblocks, 2 pages at a time */
+	pr_info("testing 2 page read speed\n");
+	start_timing();
+	for (i = 0; i < ebcnt; ++i) {
+		if (bbt[i])
+			continue;
+		err = read_eraseblock_by_2pages(i);
+		if (err)
+			goto out;
+
+		err = mtdtest_relax();
+		if (err)
+			goto out;
+	}
+	stop_timing();
+	speed = calc_speed();
+	pr_info("2 page read speed is %ld KiB/s\n", speed);
+
+	/* Erase all eraseblocks */
+	pr_info("Testing erase speed\n");
+	start_timing();
+	err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt);
+	if (err)
+		goto out;
+	stop_timing();
+	speed = calc_speed();
+	pr_info("erase speed is %ld KiB/s\n", speed);
+
+	/* Multi-block erase all eraseblocks */
+	for (k = 1; k < 7; k++) {
+		blocks = 1 << k;
+		pr_info("Testing %dx multi-block erase speed\n",
+		       blocks);
+		start_timing();
+		for (i = 0; i < ebcnt; ) {
+			for (j = 0; j < blocks && (i + j) < ebcnt; j++)
+				if (bbt[i + j])
+					break;
+			if (j < 1) {
+				i++;
+				continue;
+			}
+			err = multiblock_erase(i, j);
+			if (err)
+				goto out;
+
+			err = mtdtest_relax();
+			if (err)
+				goto out;
+
+			i += j;
+		}
+		stop_timing();
+		speed = calc_speed();
+		pr_info("%dx multi-block erase speed is %ld KiB/s\n",
+		       blocks, speed);
+	}
+	pr_info("finished\n");
+out:
+	kfree(iobuf);
+	kfree(bbt);
+	put_mtd_device(mtd);
+	if (err)
+		pr_info("error %d occurred\n", err);
+	printk(KERN_INFO "=================================================\n");
+	return err;
+}
+module_init(mtd_speedtest_init);
+
+static void __exit mtd_speedtest_exit(void)
+{
+	return;
+}
+module_exit(mtd_speedtest_exit);
+
+MODULE_DESCRIPTION("Speed test module");
+MODULE_AUTHOR("Adrian Hunter");
+MODULE_LICENSE("GPL");