diff options
| author | Donggeun Yoo <donggeunyoo.kernel@gmail.com> | 2026-09-02 00:21:26 +0900 |
|---|---|---|
| committer | Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> | 2026-09-07 02:24:53 +0100 |
| commit | e24328974a88aa8541e94e8bb8dfa2ade1b3c45d (patch) | |
| tree | 43a2533acc955d11f5cb8be1ecba0ab8ba4cbb1e /drivers/mtd/devices/Makefile | |
| download | linux-stable-e24328974a88aa8541e94e8bb8dfa2ade1b3c45d.tar.gz linux-stable-e24328974a88aa8541e94e8bb8dfa2ade1b3c45d.zip | |
iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted
vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.
The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.
Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.
Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Diffstat (limited to 'drivers/mtd/devices/Makefile')
| -rw-r--r-- | drivers/mtd/devices/Makefile | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile new file mode 100644 index 000000000..9fe4ce9cf --- /dev/null +++ b/drivers/mtd/devices/Makefile @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# linux/drivers/mtd/devices/Makefile +# + +obj-$(CONFIG_MTD_DOCG3) += docg3.o +obj-$(CONFIG_MTD_SLRAM) += slram.o +obj-$(CONFIG_MTD_PHRAM) += phram.o +obj-$(CONFIG_MTD_PMC551) += pmc551.o +obj-$(CONFIG_MTD_MS02NV) += ms02-nv.o +obj-$(CONFIG_MTD_MTDRAM) += mtdram.o +obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o +obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o +obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o +obj-$(CONFIG_MTD_MCHP48L640) += mchp48l640.o +obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o +obj-$(CONFIG_MTD_SST25L) += sst25l.o +obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o +obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o +obj-$(CONFIG_MTD_POWERNV_FLASH) += powernv_flash.o +obj-$(CONFIG_MTD_INTEL_DG) += mtd_intel_dg.o + + +CFLAGS_docg3.o += -I$(src) |