Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Fix error output of boot instance creation failure

   Currently if a boot instance creation fails, instead of printing out
   the name of the instance that failed, it prints "(null)". That is
   because it prints "cur_str" that had already been processed by
   strsep(). Print the saved name instead.

   While at it, print the error code of the failure.

 - Fix use-after-free for same named historgrams

   Histograms can be named so that they can be used in multiple events.
   But if the named histogram has a variable attached, the second event
   that uses the named histogram which duplicates it and needs to free
   the original after duplication leaves the old variable in place and
   still visible. If another histogram uses than variable, it will use
   the stale one which will try to reference the freed duplicate
   histogram and crash the kernel.

   Free the duplicate variables along with the duplicated histogram
   data.

 - Check return value of kthread_run() in event self test

   The events self tests uses a kthread for testing but does not check
   if it succeeded in creating a kthread. If the kthread creation were
   to fail, the code will still try to call kthread_stop() on the error
   returned.

 - Fix race between reading trace_pipe and updating subbuffer size

   If a user is reading the trace_pipe file at the same time they update
   the ring buffer sub-buffer size, can cause the trace_pipe read to
   read stale data. Add trace_access_lock() around updating the ring
   buffer sub-buffer size.

 - Fix eventfs_inode on failure path in creation of the events directory

   In the creation of the "events" directory, if after allocating the
   eventfs_inode a failure is detected, it calls cleanup_ei() which
   calls free_ei(). The free_ei() will test if eventfs_inode being freed
   has no children. It is a bug if it does. But on the failure case of
   the creation of the "events" directory, the children lists have not
   yet been initialized and the free will trigger a warning because
   list_empty() on an uninitialized list returns false.

   Move the initialization into init_ei() where it makes more sense and
   makes sure that a created eventfs_inode has its lists initialized
   upon creation.

 - Check return value of kthread_run() in ftrace direct sample code

   The sample code that shows how to use the ftrace direct calls does
   not test the return of kthread_run() to see if it succeeds. Return a
   failure if the kthread_run() doesn't succeed.

 - Clear user events state on fork in case of alloc failure

   On fork, the child gets a pointer to the parent's user events state.
   It makes a copy of it then updates the child's pointer to it. But if
   the allocation fails, the duplication function leaves the child with
   a pointer to its parent's descriptor. When the child cleans up its
   data, it will free the parent's descriptor while the parent is still
   using it.

   In the duplication function, set the child's user_event_mm to NULL
   before testing if the allocation succeeded, and when it exits it will
   not free the parent's descriptor.

 - Fix retry exhaustion in simple ring buffer reader swap

   simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
   post-decrements it only after a failed link replacement. On the final
   attempt, a successful replacement leaves retry at zero, while a
   failed replacement leaves it at -1.

   But the check for success expects the retry value to be non-zero and
   exits with an error on zero. This is the opposite result. Fix it.

 - Fail nicely when the remote swap_reader_page() returns an error

   Currently, if the swap_reader_page() of a remote buffer fails, it
   triggers a WARN_ON_ONCE() and continues normally. Instead, have it
   exit with an error and a pr_warn() print instead of a full WARNING.

* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Stop remote reader update when page swap fails
  tracing: Fix retry exhaustion in simple ring buffer reader swap
  tracing/user_events: Clear copied tracing state before fork duplication
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
  eventfs: Initialize ei->children and ei->list in init_ei()
  tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
  tracing: Fix crash passing ERR_PTR to kthread_stop()
  tracing: Fix use-after-free with same-name named triggers
  tracing: Fix logged instance name on creation failure

1 files changed, 243 insertions, 0 deletions

diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
new file mode 100644
index 000000000..19726ebd9
--- /dev/null
+++ b/drivers/mtd/chips/Kconfig
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "RAM/ROM/Flash chip drivers"
+	depends on MTD!=n
+
+config MTD_CFI
+	tristate "Detect flash chips by Common Flash Interface (CFI) probe"
+	select MTD_GEN_PROBE
+	select MTD_CFI_UTIL
+	help
+	  The Common Flash Interface specification was developed by Intel,
+	  AMD and other flash manufactures that provides a universal method
+	  for probing the capabilities of flash devices. If you wish to
+	  support any device that is CFI-compliant, you need to enable this
+	  option. Visit <https://www.amd.com/products/nvd/overview/cfi.html>
+	  for more information on CFI.
+
+config MTD_JEDECPROBE
+	tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
+	select MTD_GEN_PROBE
+	select MTD_CFI_UTIL
+	help
+	  This option enables JEDEC-style probing of flash chips which are not
+	  compatible with the Common Flash Interface, but will use the common
+	  CFI-targeted flash drivers for any chips which are identified which
+	  are in fact compatible in all but the probe method. This actually
+	  covers most AMD/Fujitsu-compatible chips and also non-CFI
+	  Intel chips.
+
+config MTD_GEN_PROBE
+	tristate
+
+config MTD_CFI_ADV_OPTIONS
+	bool "Flash chip driver advanced configuration options"
+	depends on MTD_GEN_PROBE
+	help
+	  If you need to specify a specific endianness for access to flash
+	  chips, or if you wish to reduce the size of the kernel by including
+	  support for only specific arrangements of flash chips, say 'Y'. This
+	  option does not directly affect the code, but will enable other
+	  configuration options which allow you to do so.
+
+	  If unsure, say 'N'.
+
+choice
+	prompt "Flash cmd/query data swapping"
+	depends on MTD_CFI_ADV_OPTIONS
+	default MTD_CFI_NOSWAP
+	help
+	  This option defines the way in which the CPU attempts to arrange
+	  data bits when writing the 'magic' commands to the chips. Saying
+	  'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't
+	  enabled, means that the CPU will not do any swapping; the chips
+	  are expected to be wired to the CPU in 'host-endian' form.
+	  Specific arrangements are possible with the BIG_ENDIAN_BYTE and
+	  LITTLE_ENDIAN_BYTE, if the bytes are reversed.
+
+config MTD_CFI_NOSWAP
+	depends on !ARCH_IXP4XX || CPU_BIG_ENDIAN
+	bool "NO"
+
+config MTD_CFI_BE_BYTE_SWAP
+	bool "BIG_ENDIAN_BYTE"
+
+config MTD_CFI_LE_BYTE_SWAP
+	depends on !ARCH_IXP4XX
+	bool "LITTLE_ENDIAN_BYTE"
+
+endchoice
+
+config MTD_CFI_GEOMETRY
+	bool "Specific CFI Flash geometry selection"
+	depends on MTD_CFI_ADV_OPTIONS
+	select MTD_MAP_BANK_WIDTH_1 if  !(MTD_MAP_BANK_WIDTH_2 || \
+		 MTD_MAP_BANK_WIDTH_4  || MTD_MAP_BANK_WIDTH_8 || \
+		 MTD_MAP_BANK_WIDTH_16 || MTD_MAP_BANK_WIDTH_32)
+	select MTD_CFI_I1 if !(MTD_CFI_I2 || MTD_CFI_I4 || MTD_CFI_I8)
+	help
+	  This option does not affect the code directly, but will enable
+	  some other configuration options which would allow you to reduce
+	  the size of the kernel by including support for only certain
+	  arrangements of CFI chips. If unsure, say 'N' and all options
+	  which are supported by the current code will be enabled.
+
+config MTD_MAP_BANK_WIDTH_1
+	bool "Support  8-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  8 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_2
+	bool "Support 16-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  16 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_4
+	bool "Support 32-bit buswidth" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  32 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_8
+	bool "Support 64-bit buswidth" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  64 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_16
+	bool "Support 128-bit buswidth" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  128 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_32
+	bool "Support 256-bit buswidth" if MTD_CFI_GEOMETRY
+	select MTD_COMPLEX_MAPPINGS if HAS_IOMEM
+	default n
+	help
+	  If you wish to support CFI devices on a physical bus which is
+	  256 bits wide, say 'Y'.
+
+config MTD_CFI_I1
+	bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If your flash chips are not interleaved - i.e. you only have one
+	  flash chip addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I2
+	bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY
+	default y
+	help
+	  If your flash chips are interleaved in pairs - i.e. you have two
+	  flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I4
+	bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If your flash chips are interleaved in fours - i.e. you have four
+	  flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I8
+	bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY
+	default n
+	help
+	  If your flash chips are interleaved in eights - i.e. you have eight
+	  flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_OTP
+	bool "Protection Registers aka one-time programmable (OTP) bits"
+	depends on MTD_CFI_ADV_OPTIONS
+	default n
+	help
+	  This enables support for reading, writing and locking so called
+	  "Protection Registers" present on some flash chips.
+	  A subset of them are pre-programmed at the factory with a
+	  unique set of values. The rest is user-programmable.
+
+	  The user-programmable Protection Registers contain one-time
+	  programmable (OTP) bits; when programmed, register bits cannot be
+	  erased. Each Protection Register can be accessed multiple times to
+	  program individual bits, as long as the register remains unlocked.
+
+	  Each Protection Register has an associated Lock Register bit. When a
+	  Lock Register bit is programmed, the associated Protection Register
+	  can only be read; it can no longer be programmed. Additionally,
+	  because the Lock Register bits themselves are OTP, when programmed,
+	  Lock Register bits cannot be erased. Therefore, when a Protection
+	  Register is locked, it cannot be unlocked.
+
+	  This feature should therefore be used with extreme care. Any mistake
+	  in the programming of OTP bits will waste them.
+
+config MTD_CFI_INTELEXT
+	tristate "Support for CFI command set 0001 (Intel/Sharp chips)"
+	depends on MTD_GEN_PROBE
+	select MTD_CFI_UTIL
+	help
+	  The Common Flash Interface defines a number of different command
+	  sets which a CFI-compliant chip may claim to implement. This code
+	  provides support for command set 0001, used on Intel StrataFlash
+	  and other parts.
+
+config MTD_CFI_AMDSTD
+	tristate "Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips)"
+	depends on MTD_GEN_PROBE
+	select MTD_CFI_UTIL
+	help
+	  The Common Flash Interface defines a number of different command
+	  sets which a CFI-compliant chip may claim to implement. This code
+	  provides support for command set 0002, used on chips including
+	  the AMD Am29LV320.
+
+config MTD_CFI_STAA
+	tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)"
+	depends on MTD_GEN_PROBE
+	select MTD_CFI_UTIL
+	help
+	  The Common Flash Interface defines a number of different command
+	  sets which a CFI-compliant chip may claim to implement. This code
+	  provides support for command set 0020.
+
+config MTD_CFI_UTIL
+	tristate
+
+config MTD_RAM
+	tristate "Support for RAM chips in bus mapping"
+	help
+	  This option enables basic support for RAM chips accessed through
+	  a bus mapping driver.
+
+config MTD_ROM
+	tristate "Support for ROM chips in bus mapping"
+	help
+	  This option enables basic support for ROM chips accessed through
+	  a bus mapping driver.
+
+config MTD_ABSENT
+	tristate "Support for absent chips in bus mapping"
+	help
+	  This option enables support for a dummy probing driver used to
+	  allocated placeholder MTD devices on systems that have socketed
+	  or removable media.  Use of this driver as a fallback chip probe
+	  preserves the expected registration order of MTD device nodes on
+	  the system regardless of media presence.  Device nodes created
+	  with this driver will return -ENODEV upon access.
+
+config MTD_XIP
+	bool "XIP aware MTD support"
+	depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && ARCH_MTD_XIP
+	default y if XIP_KERNEL
+	help
+	  This allows MTD support to work with flash memory which is also
+	  used for XIP purposes.  If you're not sure what this is all about
+	  then say N.
+
+endmenu