Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 435 insertions, 0 deletions

diff --git a/drivers/misc/lkdtm/refcount.c b/drivers/misc/lkdtm/refcount.c
new file mode 100644
index 000000000..8f744bee6
--- /dev/null
+++ b/drivers/misc/lkdtm/refcount.c
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This is for all the tests related to refcount bugs (e.g. overflow,
+ * underflow, reaching zero untested, etc).
+ */
+#include "lkdtm.h"
+#include <linux/refcount.h>
+
+static void overflow_check(refcount_t *ref)
+{
+	switch (refcount_read(ref)) {
+	case REFCOUNT_SATURATED:
+		pr_info("Overflow detected: saturated\n");
+		break;
+	case REFCOUNT_MAX:
+		pr_warn("Overflow detected: unsafely reset to max\n");
+		break;
+	default:
+		pr_err("Fail: refcount wrapped to %d\n", refcount_read(ref));
+	}
+}
+
+/*
+ * A refcount_inc() above the maximum value of the refcount implementation,
+ * should at least saturate, and at most also WARN.
+ */
+static void lkdtm_REFCOUNT_INC_OVERFLOW(void)
+{
+	refcount_t over = REFCOUNT_INIT(REFCOUNT_MAX - 1);
+
+	pr_info("attempting good refcount_inc() without overflow\n");
+	refcount_dec(&over);
+	refcount_inc(&over);
+
+	pr_info("attempting bad refcount_inc() overflow\n");
+	refcount_inc(&over);
+	refcount_inc(&over);
+
+	overflow_check(&over);
+}
+
+/* refcount_add() should behave just like refcount_inc() above. */
+static void lkdtm_REFCOUNT_ADD_OVERFLOW(void)
+{
+	refcount_t over = REFCOUNT_INIT(REFCOUNT_MAX - 1);
+
+	pr_info("attempting good refcount_add() without overflow\n");
+	refcount_dec(&over);
+	refcount_dec(&over);
+	refcount_dec(&over);
+	refcount_dec(&over);
+	refcount_add(4, &over);
+
+	pr_info("attempting bad refcount_add() overflow\n");
+	refcount_add(4, &over);
+
+	overflow_check(&over);
+}
+
+/* refcount_inc_not_zero() should behave just like refcount_inc() above. */
+static void lkdtm_REFCOUNT_INC_NOT_ZERO_OVERFLOW(void)
+{
+	refcount_t over = REFCOUNT_INIT(REFCOUNT_MAX);
+
+	pr_info("attempting bad refcount_inc_not_zero() overflow\n");
+	if (!refcount_inc_not_zero(&over))
+		pr_warn("Weird: refcount_inc_not_zero() reported zero\n");
+
+	overflow_check(&over);
+}
+
+/* refcount_add_not_zero() should behave just like refcount_inc() above. */
+static void lkdtm_REFCOUNT_ADD_NOT_ZERO_OVERFLOW(void)
+{
+	refcount_t over = REFCOUNT_INIT(REFCOUNT_MAX);
+
+	pr_info("attempting bad refcount_add_not_zero() overflow\n");
+	if (!refcount_add_not_zero(6, &over))
+		pr_warn("Weird: refcount_add_not_zero() reported zero\n");
+
+	overflow_check(&over);
+}
+
+static void check_zero(refcount_t *ref)
+{
+	switch (refcount_read(ref)) {
+	case REFCOUNT_SATURATED:
+		pr_info("Zero detected: saturated\n");
+		break;
+	case REFCOUNT_MAX:
+		pr_warn("Zero detected: unsafely reset to max\n");
+		break;
+	case 0:
+		pr_warn("Still at zero: refcount_inc/add() must not inc-from-0\n");
+		break;
+	default:
+		pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref));
+	}
+}
+
+/*
+ * A refcount_dec(), as opposed to a refcount_dec_and_test(), when it hits
+ * zero it should either saturate (when inc-from-zero isn't protected)
+ * or stay at zero (when inc-from-zero is protected) and should WARN for both.
+ */
+static void lkdtm_REFCOUNT_DEC_ZERO(void)
+{
+	refcount_t zero = REFCOUNT_INIT(2);
+
+	pr_info("attempting good refcount_dec()\n");
+	refcount_dec(&zero);
+
+	pr_info("attempting bad refcount_dec() to zero\n");
+	refcount_dec(&zero);
+
+	check_zero(&zero);
+}
+
+static void check_negative(refcount_t *ref, int start)
+{
+	/*
+	 * refcount_t refuses to move a refcount at all on an
+	 * over-sub, so we have to track our starting position instead of
+	 * looking only at zero-pinning.
+	 */
+	if (refcount_read(ref) == start) {
+		pr_warn("Still at %d: refcount_inc/add() must not inc-from-0\n",
+			start);
+		return;
+	}
+
+	switch (refcount_read(ref)) {
+	case REFCOUNT_SATURATED:
+		pr_info("Negative detected: saturated\n");
+		break;
+	case REFCOUNT_MAX:
+		pr_warn("Negative detected: unsafely reset to max\n");
+		break;
+	default:
+		pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref));
+	}
+}
+
+/* A refcount_dec() going negative should saturate and may WARN. */
+static void lkdtm_REFCOUNT_DEC_NEGATIVE(void)
+{
+	refcount_t neg = REFCOUNT_INIT(0);
+
+	pr_info("attempting bad refcount_dec() below zero\n");
+	refcount_dec(&neg);
+
+	check_negative(&neg, 0);
+}
+
+/*
+ * A refcount_dec_and_test() should act like refcount_dec() above when
+ * going negative.
+ */
+static void lkdtm_REFCOUNT_DEC_AND_TEST_NEGATIVE(void)
+{
+	refcount_t neg = REFCOUNT_INIT(0);
+
+	pr_info("attempting bad refcount_dec_and_test() below zero\n");
+	if (refcount_dec_and_test(&neg))
+		pr_warn("Weird: refcount_dec_and_test() reported zero\n");
+
+	check_negative(&neg, 0);
+}
+
+/*
+ * A refcount_sub_and_test() should act like refcount_dec_and_test()
+ * above when going negative.
+ */
+static void lkdtm_REFCOUNT_SUB_AND_TEST_NEGATIVE(void)
+{
+	refcount_t neg = REFCOUNT_INIT(3);
+
+	pr_info("attempting bad refcount_sub_and_test() below zero\n");
+	if (refcount_sub_and_test(5, &neg))
+		pr_warn("Weird: refcount_sub_and_test() reported zero\n");
+
+	check_negative(&neg, 3);
+}
+
+/*
+ * A refcount_sub_and_test() by zero when the counter is at zero should act like
+ * refcount_sub_and_test() above when going negative.
+ */
+static void lkdtm_REFCOUNT_SUB_AND_TEST_ZERO(void)
+{
+	refcount_t neg = REFCOUNT_INIT(0);
+
+	pr_info("attempting bad refcount_sub_and_test() at zero\n");
+	if (refcount_sub_and_test(0, &neg))
+		pr_warn("Weird: refcount_sub_and_test() reported zero\n");
+
+	check_negative(&neg, 0);
+}
+
+static void check_from_zero(refcount_t *ref)
+{
+	switch (refcount_read(ref)) {
+	case 0:
+		pr_info("Zero detected: stayed at zero\n");
+		break;
+	case REFCOUNT_SATURATED:
+		pr_info("Zero detected: saturated\n");
+		break;
+	case REFCOUNT_MAX:
+		pr_warn("Zero detected: unsafely reset to max\n");
+		break;
+	default:
+		pr_info("Fail: zero not detected, incremented to %d\n",
+			refcount_read(ref));
+	}
+}
+
+/*
+ * A refcount_inc() from zero should pin to zero or saturate and may WARN.
+ */
+static void lkdtm_REFCOUNT_INC_ZERO(void)
+{
+	refcount_t zero = REFCOUNT_INIT(0);
+
+	pr_info("attempting safe refcount_inc_not_zero() from zero\n");
+	if (!refcount_inc_not_zero(&zero)) {
+		pr_info("Good: zero detected\n");
+		if (refcount_read(&zero) == 0)
+			pr_info("Correctly stayed at zero\n");
+		else
+			pr_err("Fail: refcount went past zero!\n");
+	} else {
+		pr_err("Fail: Zero not detected!?\n");
+	}
+
+	pr_info("attempting bad refcount_inc() from zero\n");
+	refcount_inc(&zero);
+
+	check_from_zero(&zero);
+}
+
+/*
+ * A refcount_add() should act like refcount_inc() above when starting
+ * at zero.
+ */
+static void lkdtm_REFCOUNT_ADD_ZERO(void)
+{
+	refcount_t zero = REFCOUNT_INIT(0);
+
+	pr_info("attempting safe refcount_add_not_zero() from zero\n");
+	if (!refcount_add_not_zero(3, &zero)) {
+		pr_info("Good: zero detected\n");
+		if (refcount_read(&zero) == 0)
+			pr_info("Correctly stayed at zero\n");
+		else
+			pr_err("Fail: refcount went past zero\n");
+	} else {
+		pr_err("Fail: Zero not detected!?\n");
+	}
+
+	pr_info("attempting bad refcount_add() from zero\n");
+	refcount_add(3, &zero);
+
+	check_from_zero(&zero);
+}
+
+static void check_saturated(refcount_t *ref)
+{
+	switch (refcount_read(ref)) {
+	case REFCOUNT_SATURATED:
+		pr_info("Saturation detected: still saturated\n");
+		break;
+	case REFCOUNT_MAX:
+		pr_warn("Saturation detected: unsafely reset to max\n");
+		break;
+	default:
+		pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref));
+	}
+}
+
+/*
+ * A refcount_inc() from a saturated value should at most warn about
+ * being saturated already.
+ */
+static void lkdtm_REFCOUNT_INC_SATURATED(void)
+{
+	refcount_t sat = REFCOUNT_INIT(REFCOUNT_SATURATED);
+
+	pr_info("attempting bad refcount_inc() from saturated\n");
+	refcount_inc(&sat);
+
+	check_saturated(&sat);
+}
+
+/* Should act like refcount_inc() above from saturated. */
+static void lkdtm_REFCOUNT_DEC_SATURATED(void)
+{
+	refcount_t sat = REFCOUNT_INIT(REFCOUNT_SATURATED);
+
+	pr_info("attempting bad refcount_dec() from saturated\n");
+	refcount_dec(&sat);
+
+	check_saturated(&sat);
+}
+
+/* Should act like refcount_inc() above from saturated. */
+static void lkdtm_REFCOUNT_ADD_SATURATED(void)
+{
+	refcount_t sat = REFCOUNT_INIT(REFCOUNT_SATURATED);
+
+	pr_info("attempting bad refcount_dec() from saturated\n");
+	refcount_add(8, &sat);
+
+	check_saturated(&sat);
+}
+
+/* Should act like refcount_inc() above from saturated. */
+static void lkdtm_REFCOUNT_INC_NOT_ZERO_SATURATED(void)
+{
+	refcount_t sat = REFCOUNT_INIT(REFCOUNT_SATURATED);
+
+	pr_info("attempting bad refcount_inc_not_zero() from saturated\n");
+	if (!refcount_inc_not_zero(&sat))
+		pr_warn("Weird: refcount_inc_not_zero() reported zero\n");
+
+	check_saturated(&sat);
+}
+
+/* Should act like refcount_inc() above from saturated. */
+static void lkdtm_REFCOUNT_ADD_NOT_ZERO_SATURATED(void)
+{
+	refcount_t sat = REFCOUNT_INIT(REFCOUNT_SATURATED);
+
+	pr_info("attempting bad refcount_add_not_zero() from saturated\n");
+	if (!refcount_add_not_zero(7, &sat))
+		pr_warn("Weird: refcount_add_not_zero() reported zero\n");
+
+	check_saturated(&sat);
+}
+
+/* Should act like refcount_inc() above from saturated. */
+static void lkdtm_REFCOUNT_DEC_AND_TEST_SATURATED(void)
+{
+	refcount_t sat = REFCOUNT_INIT(REFCOUNT_SATURATED);
+
+	pr_info("attempting bad refcount_dec_and_test() from saturated\n");
+	if (refcount_dec_and_test(&sat))
+		pr_warn("Weird: refcount_dec_and_test() reported zero\n");
+
+	check_saturated(&sat);
+}
+
+/* Should act like refcount_inc() above from saturated. */
+static void lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED(void)
+{
+	refcount_t sat = REFCOUNT_INIT(REFCOUNT_SATURATED);
+
+	pr_info("attempting bad refcount_sub_and_test() from saturated\n");
+	if (refcount_sub_and_test(8, &sat))
+		pr_warn("Weird: refcount_sub_and_test() reported zero\n");
+
+	check_saturated(&sat);
+}
+
+/* Used to time the existing atomic_t when used for reference counting */
+static void lkdtm_ATOMIC_TIMING(void)
+{
+	unsigned int i;
+	atomic_t count = ATOMIC_INIT(1);
+
+	for (i = 0; i < INT_MAX - 1; i++)
+		atomic_inc(&count);
+
+	for (i = INT_MAX; i > 0; i--)
+		if (atomic_dec_and_test(&count))
+			break;
+
+	if (i != 1)
+		pr_err("atomic timing: out of sync up/down cycle: %u\n", i - 1);
+	else
+		pr_info("atomic timing: done\n");
+}
+
+/*
+ * This can be compared to ATOMIC_TIMING when implementing fast refcount
+ * protections. Looking at the number of CPU cycles tells the real story
+ * about performance. For example:
+ *    cd /sys/kernel/debug/provoke-crash
+ *    perf stat -B -- cat <(echo REFCOUNT_TIMING) > DIRECT
+ */
+static void lkdtm_REFCOUNT_TIMING(void)
+{
+	unsigned int i;
+	refcount_t count = REFCOUNT_INIT(1);
+
+	for (i = 0; i < INT_MAX - 1; i++)
+		refcount_inc(&count);
+
+	for (i = INT_MAX; i > 0; i--)
+		if (refcount_dec_and_test(&count))
+			break;
+
+	if (i != 1)
+		pr_err("refcount: out of sync up/down cycle: %u\n", i - 1);
+	else
+		pr_info("refcount timing: done\n");
+}
+
+static struct crashtype crashtypes[] = {
+	CRASHTYPE(REFCOUNT_INC_OVERFLOW),
+	CRASHTYPE(REFCOUNT_ADD_OVERFLOW),
+	CRASHTYPE(REFCOUNT_INC_NOT_ZERO_OVERFLOW),
+	CRASHTYPE(REFCOUNT_ADD_NOT_ZERO_OVERFLOW),
+	CRASHTYPE(REFCOUNT_DEC_ZERO),
+	CRASHTYPE(REFCOUNT_DEC_NEGATIVE),
+	CRASHTYPE(REFCOUNT_DEC_AND_TEST_NEGATIVE),
+	CRASHTYPE(REFCOUNT_SUB_AND_TEST_NEGATIVE),
+	CRASHTYPE(REFCOUNT_SUB_AND_TEST_ZERO),
+	CRASHTYPE(REFCOUNT_INC_ZERO),
+	CRASHTYPE(REFCOUNT_ADD_ZERO),
+	CRASHTYPE(REFCOUNT_INC_SATURATED),
+	CRASHTYPE(REFCOUNT_DEC_SATURATED),
+	CRASHTYPE(REFCOUNT_ADD_SATURATED),
+	CRASHTYPE(REFCOUNT_INC_NOT_ZERO_SATURATED),
+	CRASHTYPE(REFCOUNT_ADD_NOT_ZERO_SATURATED),
+	CRASHTYPE(REFCOUNT_DEC_AND_TEST_SATURATED),
+	CRASHTYPE(REFCOUNT_SUB_AND_TEST_SATURATED),
+	CRASHTYPE(ATOMIC_TIMING),
+	CRASHTYPE(REFCOUNT_TIMING),
+};
+
+struct crashtype_category refcount_crashtypes = {
+	.crashtypes = crashtypes,
+	.len	    = ARRAY_SIZE(crashtypes),
+};