drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 359 insertions, 0 deletions

diff --git a/drivers/misc/keba/lan9252.c b/drivers/misc/keba/lan9252.c
new file mode 100644
index 000000000..874dd50fa
--- /dev/null
+++ b/drivers/misc/keba/lan9252.c
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) KEBA Industrial Automation Gmbh 2024
+ *
+ * Driver for LAN9252 on KEBA CP500 devices
+ *
+ * This driver is used for updating the configuration of the LAN9252 controller
+ * on KEBA CP500 devices. The LAN9252 is connected over SPI, which is also named
+ * PDI.
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/mii.h>
+
+/* SPI commands */
+#define LAN9252_SPI_READ	0x3
+#define LAN9252_SPI_WRITE	0x2
+
+struct lan9252_read_cmd {
+	u8 cmd;
+	u8 addr_0;
+	u8 addr_1;
+} __packed;
+
+struct lan9252_write_cmd {
+	u8 cmd;
+	u8 addr_0;
+	u8 addr_1;
+	u32 data;
+} __packed;
+
+/* byte test register */
+#define LAN9252_BYTE_TEST		0x64
+#define   LAN9252_BYTE_TEST_VALUE	0x87654321
+
+/* hardware configuration register */
+#define LAN9252_HW_CFG		0x74
+#define   LAN9252_HW_CFG_READY	0x08000000
+
+/* EtherCAT CSR interface data register */
+#define LAN9252_ECAT_CSR_DATA	0x300
+
+/* EtherCAT CSR interface command register */
+#define LAN9252_ECAT_CSR_CMD	0x304
+#define   LAN9252_ECAT_CSR_BUSY	0x80000000
+#define   LAN9252_ECAT_CSR_READ	0x40000000
+
+/* EtherCAT slave controller MII register */
+#define LAN9252_ESC_MII			0x510
+#define   LAN9252_ESC_MII_BUSY		0x8000
+#define   LAN9252_ESC_MII_CMD_ERR	0x4000
+#define   LAN9252_ESC_MII_READ_ERR	0x2000
+#define   LAN9252_ESC_MII_ERR_MASK	(LAN9252_ESC_MII_CMD_ERR | \
+					 LAN9252_ESC_MII_READ_ERR)
+#define   LAN9252_ESC_MII_WRITE		0x0200
+#define   LAN9252_ESC_MII_READ		0x0100
+
+/* EtherCAT slave controller PHY address register */
+#define LAN9252_ESC_PHY_ADDR		0x512
+
+/* EtherCAT slave controller PHY register address register */
+#define LAN9252_ESC_PHY_REG_ADDR	0x513
+
+/* EtherCAT slave controller PHY data register */
+#define LAN9252_ESC_PHY_DATA		0x514
+
+/* EtherCAT slave controller PDI access state register */
+#define LAN9252_ESC_MII_PDI		0x517
+#define   LAN9252_ESC_MII_ACCESS_PDI	0x01
+#define   LAN9252_ESC_MII_ACCESS_ECAT	0x00
+
+/* PHY address */
+#define PHY_ADDRESS	2
+
+#define SPI_RETRY_COUNT		10
+#define SPI_WAIT_US		100
+#define SPI_CSR_WAIT_US		500
+
+static int lan9252_spi_read(struct spi_device *spi, u16 addr, u32 *data)
+{
+	struct lan9252_read_cmd cmd;
+
+	cmd.cmd = LAN9252_SPI_READ;
+	cmd.addr_0 = (addr >> 8) & 0xFF;
+	cmd.addr_1 = addr & 0xFF;
+
+	return spi_write_then_read(spi, (u8 *)&cmd,
+				   sizeof(struct lan9252_read_cmd),
+				   (u8 *)data, sizeof(u32));
+}
+
+static int lan9252_spi_write(struct spi_device *spi, u16 addr, u32 data)
+{
+	struct lan9252_write_cmd cmd;
+
+	cmd.cmd = LAN9252_SPI_WRITE;
+	cmd.addr_0 = (addr >> 8) & 0xFF;
+	cmd.addr_1 = addr & 0xFF;
+	cmd.data = data;
+
+	return spi_write(spi, (u8 *)&cmd, sizeof(struct lan9252_write_cmd));
+}
+
+static bool lan9252_init(struct spi_device *spi)
+{
+	u32 data;
+	int ret;
+
+	ret = lan9252_spi_read(spi, LAN9252_BYTE_TEST, &data);
+	if (ret || data != LAN9252_BYTE_TEST_VALUE)
+		return false;
+
+	ret = lan9252_spi_read(spi, LAN9252_HW_CFG, &data);
+	if (ret || !(data & LAN9252_HW_CFG_READY))
+		return false;
+
+	return true;
+}
+
+static u8 lan9252_esc_get_size(u16 addr)
+{
+	if (addr == LAN9252_ESC_MII || addr == LAN9252_ESC_PHY_DATA)
+		return 2;
+
+	return 1;
+}
+
+static int lan9252_esc_wait(struct spi_device *spi)
+{
+	ktime_t timeout = ktime_add_us(ktime_get(), SPI_WAIT_US);
+	u32 data;
+	int ret;
+
+	/* wait while CSR command is busy */
+	for (;;) {
+		ret = lan9252_spi_read(spi, LAN9252_ECAT_CSR_CMD, &data);
+		if (ret)
+			return ret;
+		if (!(data & LAN9252_ECAT_CSR_BUSY))
+			return 0;
+
+		if (ktime_compare(ktime_get(), timeout) > 0) {
+			ret = lan9252_spi_read(spi, LAN9252_ECAT_CSR_CMD, &data);
+			if (ret)
+				return ret;
+			break;
+		}
+	}
+
+	return (!(data & LAN9252_ECAT_CSR_BUSY)) ? 0 : -ETIMEDOUT;
+}
+
+static int lan9252_esc_read(struct spi_device *spi, u16 addr, u32 *data)
+{
+	u32 csr_cmd;
+	u8 size;
+	int ret;
+
+	size = lan9252_esc_get_size(addr);
+	csr_cmd = LAN9252_ECAT_CSR_BUSY | LAN9252_ECAT_CSR_READ;
+	csr_cmd |= (size << 16) | addr;
+	ret = lan9252_spi_write(spi, LAN9252_ECAT_CSR_CMD, csr_cmd);
+	if (ret)
+		return ret;
+
+	ret = lan9252_esc_wait(spi);
+	if (ret)
+		return ret;
+
+	ret = lan9252_spi_read(spi, LAN9252_ECAT_CSR_DATA, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int lan9252_esc_write(struct spi_device *spi, u16 addr, u32 data)
+{
+	u32 csr_cmd;
+	u8 size;
+	int ret;
+
+	ret = lan9252_spi_write(spi, LAN9252_ECAT_CSR_DATA, data);
+	if (ret)
+		return ret;
+
+	size = lan9252_esc_get_size(addr);
+	csr_cmd = LAN9252_ECAT_CSR_BUSY;
+	csr_cmd |= (size << 16) | addr;
+	ret = lan9252_spi_write(spi, LAN9252_ECAT_CSR_CMD, csr_cmd);
+	if (ret)
+		return ret;
+
+	ret = lan9252_esc_wait(spi);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int lan9252_access_mii(struct spi_device *spi, bool access)
+{
+	u32 data;
+
+	if (access)
+		data = LAN9252_ESC_MII_ACCESS_PDI;
+	else
+		data = LAN9252_ESC_MII_ACCESS_ECAT;
+
+	return lan9252_esc_write(spi, LAN9252_ESC_MII_PDI, data);
+}
+
+static int lan9252_mii_wait(struct spi_device *spi)
+{
+	ktime_t timeout = ktime_add_us(ktime_get(), SPI_CSR_WAIT_US);
+	u32 data;
+	int ret;
+
+	/* wait while MII control state machine is busy */
+	for (;;) {
+		ret = lan9252_esc_read(spi, LAN9252_ESC_MII, &data);
+		if (ret)
+			return ret;
+		if (data & LAN9252_ESC_MII_ERR_MASK)
+			return -EIO;
+		if (!(data & LAN9252_ESC_MII_BUSY))
+			return 0;
+
+		if (ktime_compare(ktime_get(), timeout) > 0) {
+			ret = lan9252_esc_read(spi, LAN9252_ESC_MII, &data);
+			if (ret)
+				return ret;
+			if (data & LAN9252_ESC_MII_ERR_MASK)
+				return -EIO;
+			break;
+		}
+	}
+
+	return (!(data & LAN9252_ESC_MII_BUSY)) ? 0 : -ETIMEDOUT;
+}
+
+static int lan9252_mii_read(struct spi_device *spi, u8 phy_addr, u8 reg_addr,
+			    u32 *data)
+{
+	int ret;
+
+	ret = lan9252_esc_write(spi, LAN9252_ESC_PHY_ADDR, phy_addr);
+	if (ret)
+		return ret;
+	ret = lan9252_esc_write(spi, LAN9252_ESC_PHY_REG_ADDR, reg_addr);
+	if (ret)
+		return ret;
+
+	ret = lan9252_esc_write(spi, LAN9252_ESC_MII, LAN9252_ESC_MII_READ);
+	if (ret)
+		return ret;
+
+	ret = lan9252_mii_wait(spi);
+	if (ret)
+		return ret;
+
+	return lan9252_esc_read(spi, LAN9252_ESC_PHY_DATA, data);
+}
+
+static int lan9252_mii_write(struct spi_device *spi, u8 phy_addr, u8 reg_addr,
+			     u32 data)
+{
+	int ret;
+
+	ret = lan9252_esc_write(spi, LAN9252_ESC_PHY_ADDR, phy_addr);
+	if (ret)
+		return ret;
+	ret = lan9252_esc_write(spi, LAN9252_ESC_PHY_REG_ADDR, reg_addr);
+	if (ret)
+		return ret;
+	ret = lan9252_esc_write(spi, LAN9252_ESC_PHY_DATA, data);
+	if (ret)
+		return ret;
+
+	ret = lan9252_esc_write(spi, LAN9252_ESC_MII, LAN9252_ESC_MII_WRITE);
+	if (ret)
+		return ret;
+
+	return lan9252_mii_wait(spi);
+}
+
+static int lan9252_probe(struct spi_device *spi)
+{
+	u32 data;
+	int retry = SPI_RETRY_COUNT;
+	int ret;
+
+	/* execute specified initialization sequence */
+	while (retry && !lan9252_init(spi))
+		retry--;
+	if (retry == 0) {
+		dev_err(&spi->dev,
+			"Can't initialize LAN9252 SPI communication!");
+		return -EIO;
+	}
+
+	/* enable access to MII management for PDI */
+	ret = lan9252_access_mii(spi, true);
+	if (ret) {
+		dev_err(&spi->dev, "Can't enable access to MII management!");
+		return ret;
+	}
+
+	/*
+	 * check PHY configuration and configure if necessary
+	 *	- full duplex
+	 *	- auto negotiation disabled
+	 *	- 100 Mbps
+	 */
+	ret = lan9252_mii_read(spi, PHY_ADDRESS, MII_BMCR, &data);
+	if (ret) {
+		dev_err(&spi->dev, "Can't read LAN9252 configuration!");
+		goto out;
+	}
+	if (!(data & BMCR_FULLDPLX) || (data & BMCR_ANENABLE) ||
+	    !(data & BMCR_SPEED100)) {
+		/*
+		 */
+		data &= ~(BMCR_ANENABLE);
+		data |= (BMCR_FULLDPLX | BMCR_SPEED100);
+		ret = lan9252_mii_write(spi, PHY_ADDRESS, MII_BMCR, data);
+		if (ret)
+			dev_err(&spi->dev,
+				"Can't write LAN9252 configuration!");
+	}
+
+	dev_info(&spi->dev, "LAN9252 PHY configuration");
+
+out:
+	/* disable access to MII management for PDI */
+	lan9252_access_mii(spi, false);
+
+	return ret;
+}
+
+static const struct spi_device_id lan9252_id[] = {
+	{ .name = "lan9252" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, lan9252_id);
+
+static struct spi_driver lan9252_driver = {
+	.driver = {
+		.name	= "lan9252",
+	},
+	.probe		= lan9252_probe,
+	.id_table	= lan9252_id,
+};
+module_spi_driver(lan9252_driver);
+
+MODULE_AUTHOR("Petar Bojanic <boja@keba.com>");
+MODULE_AUTHOR("Gerhard Engleder <eg@keba.com>");
+MODULE_DESCRIPTION("KEBA LAN9252 driver");
+MODULE_LICENSE("GPL");