Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 226 insertions, 0 deletions

diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c
new file mode 100644
index 000000000..c288aeec1
--- /dev/null
+++ b/drivers/misc/isl29020.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * isl29020.c - Intersil  ALS Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Data sheet at: http://www.intersil.com/data/fn/fn6505.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/pm_runtime.h>
+
+static DEFINE_MUTEX(mutex);
+
+static ssize_t als_sensing_range_show(struct device *dev,
+			struct device_attribute *attr,  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int  val;
+
+	val = i2c_smbus_read_byte_data(client, 0x00);
+
+	if (val < 0)
+		return val;
+	return sprintf(buf, "%d000\n", 1 << (2 * (val & 3)));
+
+}
+
+static ssize_t als_lux_input_data_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val, val;
+	unsigned long int lux;
+	int temp;
+
+	pm_runtime_get_sync(dev);
+	msleep(100);
+
+	mutex_lock(&mutex);
+	temp = i2c_smbus_read_byte_data(client, 0x02); /* MSB data */
+	if (temp < 0) {
+		pm_runtime_put_sync(dev);
+		mutex_unlock(&mutex);
+		return temp;
+	}
+
+	ret_val = i2c_smbus_read_byte_data(client, 0x01); /* LSB data */
+	mutex_unlock(&mutex);
+
+	if (ret_val < 0) {
+		pm_runtime_put_sync(dev);
+		return ret_val;
+	}
+
+	ret_val |= temp << 8;
+	val = i2c_smbus_read_byte_data(client, 0x00);
+	pm_runtime_put_sync(dev);
+	if (val < 0)
+		return val;
+	lux = ((((1 << (2 * (val & 3))))*1000) * ret_val) / 65536;
+	return sprintf(buf, "%lu\n", lux);
+}
+
+static ssize_t als_sensing_range_store(struct device *dev,
+		struct device_attribute *attr, const  char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val;
+	unsigned long val;
+
+	ret_val = kstrtoul(buf, 10, &val);
+	if (ret_val)
+		return ret_val;
+
+	if (val < 1 || val > 64000)
+		return -EINVAL;
+
+	/* Pick the smallest sensor range that will meet our requirements */
+	if (val <= 1000)
+		val = 1;
+	else if (val <= 4000)
+		val = 2;
+	else if (val <= 16000)
+		val = 3;
+	else
+		val = 4;
+
+	ret_val = i2c_smbus_read_byte_data(client, 0x00);
+	if (ret_val < 0)
+		return ret_val;
+
+	ret_val &= 0xFC; /*reset the bit before setting them */
+	ret_val |= val - 1;
+	ret_val = i2c_smbus_write_byte_data(client, 0x00, ret_val);
+
+	if (ret_val < 0)
+		return ret_val;
+	return count;
+}
+
+static void als_set_power_state(struct i2c_client *client, int enable)
+{
+	int ret_val;
+
+	ret_val = i2c_smbus_read_byte_data(client, 0x00);
+	if (ret_val < 0)
+		return;
+
+	if (enable)
+		ret_val |= 0x80;
+	else
+		ret_val &= 0x7F;
+
+	i2c_smbus_write_byte_data(client, 0x00, ret_val);
+}
+
+static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR,
+	als_sensing_range_show, als_sensing_range_store);
+static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux_input_data_show, NULL);
+
+static struct attribute *mid_att_als[] = {
+	&dev_attr_lux0_sensor_range.attr,
+	&dev_attr_lux0_input.attr,
+	NULL
+};
+
+static const struct attribute_group m_als_gr = {
+	.name = "isl29020",
+	.attrs = mid_att_als
+};
+
+static int als_set_default_config(struct i2c_client *client)
+{
+	int retval;
+
+	retval = i2c_smbus_write_byte_data(client, 0x00, 0xc0);
+	if (retval < 0) {
+		dev_err(&client->dev, "default write failed.");
+		return retval;
+	}
+	return 0;
+}
+
+static int  isl29020_probe(struct i2c_client *client)
+{
+	int res;
+
+	res = als_set_default_config(client);
+	if (res <  0)
+		return res;
+
+	res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
+	if (res) {
+		dev_err(&client->dev, "isl29020: device create file failed\n");
+		return res;
+	}
+	dev_info(&client->dev, "%s isl29020: ALS chip found\n", client->name);
+	als_set_power_state(client, 0);
+	pm_runtime_enable(&client->dev);
+	return res;
+}
+
+static void isl29020_remove(struct i2c_client *client)
+{
+	pm_runtime_disable(&client->dev);
+	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+}
+
+static const struct i2c_device_id isl29020_id[] = {
+	{ "isl29020" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, isl29020_id);
+
+#ifdef CONFIG_PM
+
+static int isl29020_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	als_set_power_state(client, 0);
+	return 0;
+}
+
+static int isl29020_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	als_set_power_state(client, 1);
+	return 0;
+}
+
+static const struct dev_pm_ops isl29020_pm_ops = {
+	.runtime_suspend = isl29020_runtime_suspend,
+	.runtime_resume = isl29020_runtime_resume,
+};
+
+#define ISL29020_PM_OPS (&isl29020_pm_ops)
+#else	/* CONFIG_PM */
+#define ISL29020_PM_OPS NULL
+#endif	/* CONFIG_PM */
+
+static struct i2c_driver isl29020_driver = {
+	.driver = {
+		.name = "isl29020",
+		.pm = ISL29020_PM_OPS,
+	},
+	.probe = isl29020_probe,
+	.remove = isl29020_remove,
+	.id_table = isl29020_id,
+};
+
+module_i2c_driver(isl29020_driver);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>");
+MODULE_DESCRIPTION("Intersil isl29020 ALS Driver");
+MODULE_LICENSE("GPL v2");