diff options
| author | Steven Rostedt <rostedt@goodmis.org> | 2026-09-02 09:55:01 -0400 |
|---|---|---|
| committer | Steven Rostedt <rostedt@goodmis.org> | 2026-09-02 11:08:21 -0400 |
| commit | 4617721c502b2ddaa4e324e86da4997edf738fa5 (patch) | |
| tree | 350aa83b47da0b574a814795392b20b0bed83cbc /drivers/mfd/timberdale.h | |
| download | linux-stable-4617721c502b2ddaa4e324e86da4997edf738fa5.tar.gz linux-stable-4617721c502b2ddaa4e324e86da4997edf738fa5.zip | |
ftrace: Synchronize the initialization of ftrace_opsgrafted
There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.
Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Diffstat (limited to 'drivers/mfd/timberdale.h')
| -rw-r--r-- | drivers/mfd/timberdale.h | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/drivers/mfd/timberdale.h b/drivers/mfd/timberdale.h new file mode 100644 index 000000000..db7b434f7 --- /dev/null +++ b/drivers/mfd/timberdale.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * timberdale.h timberdale FPGA MFD driver defines + * Copyright (c) 2009 Intel Corporation + */ + +/* Supports: + * Timberdale FPGA + */ + +#ifndef MFD_TIMBERDALE_H +#define MFD_TIMBERDALE_H + +#define DRV_VERSION "0.3" + +/* This driver only support versions >= 3.8 and < 4.0 */ +#define TIMB_SUPPORTED_MAJOR 3 + +/* This driver only support minor >= 8 */ +#define TIMB_REQUIRED_MINOR 8 + +/* Registers of the control area */ +#define TIMB_REV_MAJOR 0x00 +#define TIMB_REV_MINOR 0x04 +#define TIMB_HW_CONFIG 0x08 +#define TIMB_SW_RST 0x40 + +/* bits in the TIMB_HW_CONFIG register */ +#define TIMB_HW_CONFIG_SPI_8BIT 0x80 + +#define TIMB_HW_VER_MASK 0x0f +#define TIMB_HW_VER0 0x00 +#define TIMB_HW_VER1 0x01 +#define TIMB_HW_VER2 0x02 +#define TIMB_HW_VER3 0x03 + +#define OCORESOFFSET 0x0 +#define OCORESEND 0x1f + +#define SPIOFFSET 0x80 +#define SPIEND 0xff + +#define UARTLITEOFFSET 0x100 +#define UARTLITEEND 0x10f + +#define RDSOFFSET 0x180 +#define RDSEND 0x183 + +#define ETHOFFSET 0x300 +#define ETHEND 0x3ff + +#define GPIOOFFSET 0x400 +#define GPIOEND 0x7ff + +#define CHIPCTLOFFSET 0x800 +#define CHIPCTLEND 0x8ff +#define CHIPCTLSIZE (CHIPCTLEND - CHIPCTLOFFSET + 1) + +#define INTCOFFSET 0xc00 +#define INTCEND 0xfff +#define INTCSIZE (INTCEND - INTCOFFSET) + +#define MOSTOFFSET 0x1000 +#define MOSTEND 0x13ff + +#define UARTOFFSET 0x1400 +#define UARTEND 0x17ff + +#define XIICOFFSET 0x1800 +#define XIICEND 0x19ff + +#define I2SOFFSET 0x1C00 +#define I2SEND 0x1fff + +#define LOGIWOFFSET 0x30000 +#define LOGIWEND 0x37fff + +#define MLCOREOFFSET 0x40000 +#define MLCOREEND 0x43fff + +#define DMAOFFSET 0x01000000 +#define DMAEND 0x013fffff + +/* SDHC0 is placed in PCI bar 1 */ +#define SDHC0OFFSET 0x00 +#define SDHC0END 0xff + +/* SDHC1 is placed in PCI bar 2 */ +#define SDHC1OFFSET 0x00 +#define SDHC1END 0xff + +#define PCI_VENDOR_ID_TIMB 0x10ee +#define PCI_DEVICE_ID_TIMB 0xa123 + +#define IRQ_TIMBERDALE_INIC 0 +#define IRQ_TIMBERDALE_MLB 1 +#define IRQ_TIMBERDALE_GPIO 2 +#define IRQ_TIMBERDALE_I2C 3 +#define IRQ_TIMBERDALE_UART 4 +#define IRQ_TIMBERDALE_DMA 5 +#define IRQ_TIMBERDALE_I2S 6 +#define IRQ_TIMBERDALE_TSC_INT 7 +#define IRQ_TIMBERDALE_SDHC 8 +#define IRQ_TIMBERDALE_ADV7180 9 +#define IRQ_TIMBERDALE_ETHSW_IF 10 +#define IRQ_TIMBERDALE_SPI 11 +#define IRQ_TIMBERDALE_UARTLITE 12 +#define IRQ_TIMBERDALE_MLCORE 13 +#define IRQ_TIMBERDALE_MLCORE_BUF 14 +#define IRQ_TIMBERDALE_RDS 15 +#define TIMBERDALE_NR_IRQS 16 + +#define GPIO_PIN_ASCB 8 +#define GPIO_PIN_INIC_RST 14 +#define GPIO_PIN_BT_RST 15 + +/* DMA Channels */ +#define DMA_UART_RX 0 +#define DMA_UART_TX 1 +#define DMA_MLB_RX 2 +#define DMA_MLB_TX 3 +#define DMA_VIDEO_RX 4 +#define DMA_VIDEO_DROP 5 +#define DMA_SDHCI_RX 6 +#define DMA_SDHCI_TX 7 +#define DMA_ETH_RX 8 +#define DMA_ETH_TX 9 + +#endif |
