drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 362 insertions, 0 deletions

diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
new file mode 100644
index 000000000..21a7fcdd2
--- /dev/null
+++ b/drivers/mfd/syscon.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * System Control Driver
+ *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Linaro Ltd.
+ *
+ * Author: Dong Aisheng <dong.aisheng@linaro.org>
+ */
+
+#include <linux/cleanup.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/hwspinlock.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+static DEFINE_MUTEX(syscon_list_lock);
+static LIST_HEAD(syscon_list);
+
+struct syscon {
+	struct device_node *np;
+	struct regmap *regmap;
+	struct reset_control *reset;
+	struct list_head list;
+};
+
+static const struct regmap_config syscon_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static struct syscon *of_syscon_register(struct device_node *np, bool check_res)
+{
+	struct clk *clk;
+	struct regmap *regmap;
+	void __iomem *base;
+	u32 reg_io_width;
+	int ret;
+	struct regmap_config syscon_config = syscon_regmap_config;
+	struct resource res;
+	struct reset_control *reset;
+	resource_size_t res_size;
+
+	WARN_ON(!mutex_is_locked(&syscon_list_lock));
+
+	struct syscon *syscon __free(kfree) = kzalloc_obj(*syscon);
+	if (!syscon)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_address_to_resource(np, 0, &res))
+		return ERR_PTR(-ENOMEM);
+
+	base = of_iomap(np, 0);
+	if (!base)
+		return ERR_PTR(-ENOMEM);
+
+	/* Parse the device's DT node for an endianness specification */
+	if (of_property_read_bool(np, "big-endian"))
+		syscon_config.val_format_endian = REGMAP_ENDIAN_BIG;
+	else if (of_property_read_bool(np, "little-endian"))
+		syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
+	else if (of_property_read_bool(np, "native-endian"))
+		syscon_config.val_format_endian = REGMAP_ENDIAN_NATIVE;
+
+	/*
+	 * search for reg-io-width property in DT. If it is not provided,
+	 * default to 4 bytes. regmap_init_mmio will return an error if values
+	 * are invalid so there is no need to check them here.
+	 */
+	ret = of_property_read_u32(np, "reg-io-width", &reg_io_width);
+	if (ret)
+		reg_io_width = 4;
+
+	ret = of_hwspin_lock_get_id(np, 0);
+	if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0)) {
+		syscon_config.use_hwlock = true;
+		syscon_config.hwlock_id = ret;
+		syscon_config.hwlock_mode = HWLOCK_IRQSTATE;
+	} else if (ret < 0) {
+		switch (ret) {
+		case -ENOENT:
+			/* Ignore missing hwlock, it's optional. */
+			break;
+		default:
+			pr_err("Failed to retrieve valid hwlock: %d\n", ret);
+			fallthrough;
+		case -EPROBE_DEFER:
+			goto err_regmap;
+		}
+	}
+
+	res_size = resource_size(&res);
+	if (res_size < reg_io_width) {
+		ret = -EFAULT;
+		goto err_regmap;
+	}
+
+	syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%pa", np, &res.start);
+	if (!syscon_config.name) {
+		ret = -ENOMEM;
+		goto err_regmap;
+	}
+	syscon_config.reg_stride = reg_io_width;
+	syscon_config.val_bits = reg_io_width * 8;
+	syscon_config.max_register = res_size - reg_io_width;
+	if (!syscon_config.max_register)
+		syscon_config.max_register_is_0 = true;
+
+	regmap = regmap_init_mmio(NULL, base, &syscon_config);
+	kfree(syscon_config.name);
+	if (IS_ERR(regmap)) {
+		pr_err("regmap init failed\n");
+		ret = PTR_ERR(regmap);
+		goto err_regmap;
+	}
+
+	if (check_res) {
+		clk = of_clk_get(np, 0);
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
+			/* clock is optional */
+			if (ret != -ENOENT)
+				goto err_clk;
+		} else {
+			ret = regmap_mmio_attach_clk(regmap, clk);
+			if (ret)
+				goto err_attach_clk;
+		}
+
+		reset = of_reset_control_get_optional_exclusive(np, NULL);
+		if (IS_ERR(reset)) {
+			ret = PTR_ERR(reset);
+			goto err_attach_clk;
+		}
+
+		ret = reset_control_deassert(reset);
+		if (ret)
+			goto err_reset;
+	}
+
+	syscon->regmap = regmap;
+	syscon->np = np;
+
+	list_add_tail(&syscon->list, &syscon_list);
+
+	return_ptr(syscon);
+
+err_reset:
+	reset_control_put(reset);
+err_attach_clk:
+	if (!IS_ERR(clk))
+		clk_put(clk);
+err_clk:
+	regmap_exit(regmap);
+err_regmap:
+	iounmap(base);
+	return ERR_PTR(ret);
+}
+
+static struct regmap *device_node_get_regmap(struct device_node *np,
+					     bool create_regmap,
+					     bool check_res)
+{
+	struct syscon *entry, *syscon = NULL;
+
+	mutex_lock(&syscon_list_lock);
+
+	list_for_each_entry(entry, &syscon_list, list)
+		if (entry->np == np) {
+			syscon = entry;
+			break;
+		}
+
+	if (!syscon) {
+		if (create_regmap)
+			syscon = of_syscon_register(np, check_res);
+		else
+			syscon = ERR_PTR(-EPROBE_DEFER);
+	}
+	mutex_unlock(&syscon_list_lock);
+
+	if (IS_ERR(syscon))
+		return ERR_CAST(syscon);
+
+	return syscon->regmap;
+}
+
+/**
+ * of_syscon_register_regmap() - Register regmap for specified device node
+ * @np: Device tree node
+ * @regmap: Pointer to regmap object
+ *
+ * Register an externally created regmap object with syscon for the specified
+ * device tree node. This regmap will then be returned to client drivers using
+ * the syscon_regmap_lookup_by_phandle() API.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int of_syscon_register_regmap(struct device_node *np, struct regmap *regmap)
+{
+	struct syscon *entry, *syscon = NULL;
+	int ret;
+
+	if (!np || !regmap)
+		return -EINVAL;
+
+	syscon = kzalloc_obj(*syscon);
+	if (!syscon)
+		return -ENOMEM;
+
+	/* check if syscon entry already exists */
+	mutex_lock(&syscon_list_lock);
+
+	list_for_each_entry(entry, &syscon_list, list)
+		if (entry->np == np) {
+			ret = -EEXIST;
+			goto err_unlock;
+		}
+
+	syscon->regmap = regmap;
+	syscon->np = np;
+
+	/* register the regmap in syscon list */
+	list_add_tail(&syscon->list, &syscon_list);
+	mutex_unlock(&syscon_list_lock);
+
+	return 0;
+
+err_unlock:
+	mutex_unlock(&syscon_list_lock);
+	kfree(syscon);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(of_syscon_register_regmap);
+
+/**
+ * device_node_to_regmap() - Get or create a regmap for specified device node
+ * @np: Device tree node
+ *
+ * Get a regmap for the specified device node. If there's not an existing
+ * regmap, then one is instantiated. This function should not be used if the
+ * device node has a custom regmap driver or has resources (clocks, resets) to
+ * be managed. Use syscon_node_to_regmap() instead for those cases.
+ *
+ * Return: regmap ptr on success, negative error code on failure.
+ */
+struct regmap *device_node_to_regmap(struct device_node *np)
+{
+	return device_node_get_regmap(np, true, false);
+}
+EXPORT_SYMBOL_GPL(device_node_to_regmap);
+
+/**
+ * syscon_node_to_regmap() - Get or create a regmap for specified syscon device node
+ * @np: Device tree node
+ *
+ * Get a regmap for the specified device node. If there's not an existing
+ * regmap, then one is instantiated if the node is a generic "syscon". This
+ * function is safe to use for a syscon registered with
+ * of_syscon_register_regmap().
+ *
+ * Return: regmap ptr on success, negative error code on failure.
+ */
+struct regmap *syscon_node_to_regmap(struct device_node *np)
+{
+	return device_node_get_regmap(np, of_device_is_compatible(np, "syscon"), true);
+}
+EXPORT_SYMBOL_GPL(syscon_node_to_regmap);
+
+struct regmap *syscon_regmap_lookup_by_compatible(const char *s)
+{
+	struct device_node *syscon_np;
+	struct regmap *regmap;
+
+	syscon_np = of_find_compatible_node(NULL, NULL, s);
+	if (!syscon_np)
+		return ERR_PTR(-ENODEV);
+
+	regmap = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
+
+	return regmap;
+}
+EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_compatible);
+
+struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
+					const char *property)
+{
+	struct device_node *syscon_np;
+	struct regmap *regmap;
+
+	if (property)
+		syscon_np = of_parse_phandle(np, property, 0);
+	else
+		syscon_np = np;
+
+	if (!syscon_np)
+		return ERR_PTR(-ENODEV);
+
+	regmap = syscon_node_to_regmap(syscon_np);
+
+	if (property)
+		of_node_put(syscon_np);
+
+	return regmap;
+}
+EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle);
+
+struct regmap *syscon_regmap_lookup_by_phandle_args(struct device_node *np,
+					const char *property,
+					int arg_count,
+					unsigned int *out_args)
+{
+	struct device_node *syscon_np;
+	struct of_phandle_args args;
+	struct regmap *regmap;
+	unsigned int index;
+	int rc;
+
+	rc = of_parse_phandle_with_fixed_args(np, property, arg_count,
+			0, &args);
+	if (rc)
+		return ERR_PTR(rc);
+
+	syscon_np = args.np;
+	if (!syscon_np)
+		return ERR_PTR(-ENODEV);
+
+	regmap = syscon_node_to_regmap(syscon_np);
+	for (index = 0; index < arg_count; index++)
+		out_args[index] = args.args[index];
+	of_node_put(syscon_np);
+
+	return regmap;
+}
+EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle_args);
+
+/*
+ * It behaves the same as syscon_regmap_lookup_by_phandle() except where
+ * there is no regmap phandle. In this case, instead of returning -ENODEV,
+ * the function returns NULL.
+ */
+struct regmap *syscon_regmap_lookup_by_phandle_optional(struct device_node *np,
+					const char *property)
+{
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_phandle(np, property);
+	if (IS_ERR(regmap) && PTR_ERR(regmap) == -ENODEV)
+		return NULL;
+
+	return regmap;
+}
+EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle_optional);