Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 144 insertions, 0 deletions

diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
new file mode 100644
index 000000000..ef3ce4bdf
--- /dev/null
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Simple MFD - I2C
+ *
+ * Author(s):
+ * 	Michael Walle <michael@walle.cc>
+ * 	Lee Jones <lee.jones@linaro.org>
+ *
+ * This driver creates a single register map with the intention for it to be
+ * shared by all sub-devices.  Children can use their parent's device structure
+ * (dev.parent) in order to reference it.
+ *
+ * Once the register map has been successfully initialised, any sub-devices
+ * represented by child nodes in Device Tree or via the MFD cells in this file
+ * will be subsequently registered.
+ */
+
+#include <linux/array_size.h>
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/stddef.h>
+
+#include "simple-mfd-i2c.h"
+
+static const struct regmap_config regmap_config_8r_8v = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int simple_mfd_i2c_probe(struct i2c_client *i2c)
+{
+	const struct simple_mfd_data *simple_mfd_data;
+	const struct regmap_config *regmap_config;
+	struct regmap *regmap;
+	int ret;
+
+	simple_mfd_data = device_get_match_data(&i2c->dev);
+
+	/* If no regmap_config is specified, use the default 8reg and 8val bits */
+	if (!simple_mfd_data || !simple_mfd_data->regmap_config)
+		regmap_config = &regmap_config_8r_8v;
+	else
+		regmap_config = simple_mfd_data->regmap_config;
+
+	regmap = devm_regmap_init_i2c(i2c, regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/* If no MFD cells are specified, register using the DT child nodes instead */
+	if (!simple_mfd_data || !simple_mfd_data->mfd_cell)
+		return devm_of_platform_populate(&i2c->dev);
+
+	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+				   simple_mfd_data->mfd_cell,
+				   simple_mfd_data->mfd_cell_size,
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(&i2c->dev, "Failed to add child devices\n");
+
+	return ret;
+}
+
+static const struct mfd_cell sy7636a_cells[] = {
+	{ .name = "sy7636a-regulator", },
+	{ .name = "sy7636a-temperature", },
+};
+
+static const struct simple_mfd_data silergy_sy7636a = {
+	.mfd_cell = sy7636a_cells,
+	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
+};
+
+static const struct mfd_cell max5970_cells[] = {
+	{ .name = "max5970-regulator", },
+	{ .name = "max5970-iio", },
+	{ .name = "max5970-led", },
+};
+
+static const struct simple_mfd_data maxim_max5970 = {
+	.mfd_cell = max5970_cells,
+	.mfd_cell_size = ARRAY_SIZE(max5970_cells),
+};
+
+static const struct mfd_cell max77705_sensor_cells[] = {
+	{ .name = "max77705-battery" },
+	{ .name = "max77705-hwmon", },
+};
+
+static const struct simple_mfd_data maxim_mon_max77705 = {
+	.mfd_cell = max77705_sensor_cells,
+	.mfd_cell_size = ARRAY_SIZE(max77705_sensor_cells),
+};
+
+static const struct regmap_config spacemit_p1_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct mfd_cell spacemit_p1_cells[] = {
+	{ .name = "spacemit-p1-reboot", },
+	{ .name = "spacemit-p1-regulator", },
+	{ .name = "spacemit-p1-rtc", },
+};
+
+static const struct simple_mfd_data spacemit_p1 = {
+	.regmap_config = &spacemit_p1_regmap_config,
+	.mfd_cell = spacemit_p1_cells,
+	.mfd_cell_size = ARRAY_SIZE(spacemit_p1_cells),
+};
+
+static const struct of_device_id simple_mfd_i2c_of_match[] = {
+	{ .compatible = "delta,tn48m-cpld" },
+	{ .compatible = "fsl,ls1028aqds-fpga" },
+	{ .compatible = "fsl,lx2160aqds-fpga" },
+	{ .compatible = "fsl,lx2160ardb-fpga" },
+	{ .compatible = "kontron,sl28cpld" },
+	{ .compatible = "maxim,max5970", .data = &maxim_max5970 },
+	{ .compatible = "maxim,max5978", .data = &maxim_max5970 },
+	{ .compatible = "maxim,max77705-battery", .data = &maxim_mon_max77705 },
+	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a },
+	{ .compatible = "spacemit,p1", .data = &spacemit_p1 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
+
+static struct i2c_driver simple_mfd_i2c_driver = {
+	.probe = simple_mfd_i2c_probe,
+	.driver = {
+		.name = "simple-mfd-i2c",
+		.of_match_table = simple_mfd_i2c_of_match,
+	},
+};
+module_i2c_driver(simple_mfd_i2c_driver);
+
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_DESCRIPTION("Simple MFD - I2C driver");
+MODULE_LICENSE("GPL v2");