drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 122 insertions, 0 deletions

diff --git a/drivers/mfd/rt5120.c b/drivers/mfd/rt5120.c
new file mode 100644
index 000000000..a229eb292
--- /dev/null
+++ b/drivers/mfd/rt5120.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ * Author: ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define RT5120_REG_INTENABLE	0x1D
+#define RT5120_REG_INTSTAT	0x1E
+#define RT5120_REG_FZCMODE	0x44
+
+#define RT5120_INT_HOTDIE	0
+#define RT5120_INT_PWRKEY_REL	5
+#define RT5120_INT_PWRKEY_PRESS	6
+
+static const struct regmap_range rt5120_rd_yes_ranges[] = {
+	regmap_reg_range(0x03, 0x13),
+	regmap_reg_range(0x1c, 0x20),
+	regmap_reg_range(0x44, 0x44),
+};
+
+static const struct regmap_range rt5120_wr_yes_ranges[] = {
+	regmap_reg_range(0x06, 0x13),
+	regmap_reg_range(0x1c, 0x20),
+	regmap_reg_range(0x44, 0x44),
+};
+
+static const struct regmap_access_table rt5120_rd_table = {
+	.yes_ranges = rt5120_rd_yes_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rt5120_rd_yes_ranges),
+};
+
+static const struct regmap_access_table rt5120_wr_table = {
+	.yes_ranges = rt5120_wr_yes_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rt5120_wr_yes_ranges),
+};
+
+static const struct regmap_config rt5120_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RT5120_REG_FZCMODE,
+
+	.wr_table = &rt5120_wr_table,
+	.rd_table = &rt5120_rd_table,
+};
+
+static const struct regmap_irq rt5120_irqs[] = {
+	REGMAP_IRQ_REG_LINE(RT5120_INT_HOTDIE, 8),
+	REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_REL, 8),
+	REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_PRESS, 8),
+};
+
+static const struct regmap_irq_chip rt5120_irq_chip = {
+	.name = "rt5120-pmic",
+	.status_base = RT5120_REG_INTSTAT,
+	.unmask_base = RT5120_REG_INTENABLE,
+	.ack_base = RT5120_REG_INTSTAT,
+	.use_ack = true,
+	.num_regs = 1,
+	.irqs = rt5120_irqs,
+	.num_irqs = ARRAY_SIZE(rt5120_irqs),
+};
+
+static const struct resource rt5120_regulator_resources[] = {
+	DEFINE_RES_IRQ(RT5120_INT_HOTDIE),
+};
+
+static const struct resource rt5120_pwrkey_resources[] = {
+	DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_PRESS, "pwrkey-press"),
+	DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_REL, "pwrkey-release"),
+};
+
+static const struct mfd_cell rt5120_devs[] = {
+	MFD_CELL_RES("rt5120-regulator", rt5120_regulator_resources),
+	MFD_CELL_OF("rt5120-pwrkey", rt5120_pwrkey_resources, NULL, 0, 0, "richtek,rt5120-pwrkey"),
+};
+
+static int rt5120_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *irq_data;
+	int ret;
+
+	regmap = devm_regmap_init_i2c(i2c, &rt5120_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "Failed to init regmap\n");
+
+	ret = devm_regmap_add_irq_chip(dev, regmap, i2c->irq, IRQF_ONESHOT, 0,
+				       &rt5120_irq_chip, &irq_data);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add IRQ chip\n");
+
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, rt5120_devs,
+				    ARRAY_SIZE(rt5120_devs), NULL, 0,
+				    regmap_irq_get_domain(irq_data));
+}
+
+static const struct of_device_id rt5120_device_match_table[] = {
+	{ .compatible = "richtek,rt5120" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rt5120_device_match_table);
+
+static struct i2c_driver rt5120_driver = {
+	.driver = {
+		.name = "rt5120",
+		.of_match_table = rt5120_device_match_table,
+	},
+	.probe = rt5120_probe,
+};
+module_i2c_driver(rt5120_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RT5120 I2C driver");
+MODULE_LICENSE("GPL v2");