drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 133 insertions, 0 deletions

diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c
new file mode 100644
index 000000000..072fd4447
--- /dev/null
+++ b/drivers/mfd/rt5033.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for the Richtek RT5033.
+ *
+ * RT5033 comprises multiple sub-devices switcing charger, fuel gauge,
+ * flash LED, current source, LDO and BUCK regulators.
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+
+static const struct regmap_irq rt5033_irqs[] = {
+	{ .mask = RT5033_PMIC_IRQ_BUCKOCP, },
+	{ .mask = RT5033_PMIC_IRQ_BUCKLV, },
+	{ .mask = RT5033_PMIC_IRQ_SAFELDOLV, },
+	{ .mask = RT5033_PMIC_IRQ_LDOLV, },
+	{ .mask = RT5033_PMIC_IRQ_OT, },
+	{ .mask = RT5033_PMIC_IRQ_VDDA_UV, },
+};
+
+static const struct regmap_irq_chip rt5033_irq_chip = {
+	.name		= "rt5033",
+	.status_base	= RT5033_REG_PMIC_IRQ_STAT,
+	.unmask_base	= RT5033_REG_PMIC_IRQ_CTRL,
+	.num_regs	= 1,
+	.irqs		= rt5033_irqs,
+	.num_irqs	= ARRAY_SIZE(rt5033_irqs),
+};
+
+static const struct mfd_cell rt5033_devs[] = {
+	{ .name = "rt5033-regulator", },
+	{
+		.name = "rt5033-charger",
+		.of_compatible = "richtek,rt5033-charger",
+	}, {
+		.name = "rt5033-led",
+		.of_compatible = "richtek,rt5033-led",
+	},
+};
+
+static const struct regmap_config rt5033_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= RT5033_REG_END,
+};
+
+static int rt5033_i2c_probe(struct i2c_client *i2c)
+{
+	struct rt5033_dev *rt5033;
+	unsigned int dev_id, chip_rev;
+	int ret;
+
+	rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL);
+	if (!rt5033)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, rt5033);
+	rt5033->dev = &i2c->dev;
+	rt5033->irq = i2c->irq;
+	rt5033->wakeup = true;
+
+	rt5033->regmap = devm_regmap_init_i2c(i2c, &rt5033_regmap_config);
+	if (IS_ERR(rt5033->regmap)) {
+		dev_err(&i2c->dev, "Failed to allocate register map.\n");
+		return PTR_ERR(rt5033->regmap);
+	}
+
+	ret = regmap_read(rt5033->regmap, RT5033_REG_DEVICE_ID, &dev_id);
+	if (ret) {
+		dev_err(&i2c->dev, "Device not found\n");
+		return -ENODEV;
+	}
+	chip_rev = dev_id & RT5033_CHIP_REV_MASK;
+	dev_info(&i2c->dev, "Device found (rev. %d)\n", chip_rev);
+
+	ret = devm_regmap_add_irq_chip(rt5033->dev, rt5033->regmap,
+			rt5033->irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			0, &rt5033_irq_chip, &rt5033->irq_data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
+							rt5033->irq, ret);
+		return ret;
+	}
+
+	ret = devm_mfd_add_devices(rt5033->dev, -1, rt5033_devs,
+				   ARRAY_SIZE(rt5033_devs), NULL, 0,
+				   regmap_irq_get_domain(rt5033->irq_data));
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to add RT5033 child devices.\n");
+		return ret;
+	}
+
+	if (rt5033->wakeup) {
+		ret = devm_device_init_wakeup(rt5033->dev);
+		if (ret)
+			return dev_err_probe(rt5033->dev, ret, "Failed to init wakeup\n");
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id rt5033_i2c_id[] = {
+	{ "rt5033", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rt5033_i2c_id);
+
+static const struct of_device_id rt5033_dt_match[] = {
+	{ .compatible = "richtek,rt5033", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rt5033_dt_match);
+
+static struct i2c_driver rt5033_driver = {
+	.driver = {
+		.name = "rt5033",
+		.of_match_table = rt5033_dt_match,
+	},
+	.probe = rt5033_i2c_probe,
+	.id_table = rt5033_i2c_id,
+};
+module_i2c_driver(rt5033_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 multi-function core driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");