x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 119 insertions, 0 deletions

diff --git a/drivers/mfd/rt4831.c b/drivers/mfd/rt4831.c
new file mode 100644
index 000000000..1ab8870e4
--- /dev/null
+++ b/drivers/mfd/rt4831.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Richtek Technology Corp.
+ *
+ * Author: ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define RT4831_REG_REVISION	0x01
+#define RT4831_REG_ENABLE	0x08
+#define RT4831_REG_I2CPROT	0x15
+
+#define RICHTEK_VENDOR_ID	0x03
+#define RT4831_VID_MASK		GENMASK(1, 0)
+#define RT4831_RESET_MASK	BIT(7)
+#define RT4831_I2CSAFETMR_MASK	BIT(0)
+
+static const struct mfd_cell rt4831_subdevs[] = {
+	MFD_CELL_OF("rt4831-backlight", NULL, NULL, 0, 0, "richtek,rt4831-backlight"),
+	MFD_CELL_NAME("rt4831-regulator")
+};
+
+static bool rt4831_is_accessible_reg(struct device *dev, unsigned int reg)
+{
+	if (reg >= RT4831_REG_REVISION && reg <= RT4831_REG_I2CPROT)
+		return true;
+	return false;
+}
+
+static const struct regmap_config rt4831_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RT4831_REG_I2CPROT,
+
+	.readable_reg = rt4831_is_accessible_reg,
+	.writeable_reg = rt4831_is_accessible_reg,
+};
+
+static int rt4831_probe(struct i2c_client *client)
+{
+	struct gpio_desc *enable_gpio;
+	struct regmap *regmap;
+	unsigned int chip_id;
+	int ret;
+
+	enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_HIGH);
+	if (IS_ERR(enable_gpio)) {
+		dev_err(&client->dev, "Failed to get 'enable' GPIO\n");
+		return PTR_ERR(enable_gpio);
+	}
+
+	regmap = devm_regmap_init_i2c(client, &rt4831_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to initialize regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	ret = regmap_read(regmap, RT4831_REG_REVISION, &chip_id);
+	if (ret) {
+		dev_err(&client->dev, "Failed to get H/W revision\n");
+		return ret;
+	}
+
+	if ((chip_id & RT4831_VID_MASK) != RICHTEK_VENDOR_ID) {
+		dev_err(&client->dev, "Chip vendor ID 0x%02x not matched\n", chip_id);
+		return -ENODEV;
+	}
+
+	/*
+	 * Used to prevent the abnormal shutdown.
+	 * If SCL/SDA both keep low for one second to reset HW.
+	 */
+	ret = regmap_update_bits(regmap, RT4831_REG_I2CPROT, RT4831_I2CSAFETMR_MASK,
+				 RT4831_I2CSAFETMR_MASK);
+	if (ret) {
+		dev_err(&client->dev, "Failed to enable I2C safety timer\n");
+		return ret;
+	}
+
+	return devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, rt4831_subdevs,
+				    ARRAY_SIZE(rt4831_subdevs), NULL, 0, NULL);
+}
+
+static void rt4831_remove(struct i2c_client *client)
+{
+	struct regmap *regmap = dev_get_regmap(&client->dev, NULL);
+	int ret;
+
+	/* Disable WLED and DSV outputs */
+	ret = regmap_update_bits(regmap, RT4831_REG_ENABLE, RT4831_RESET_MASK, RT4831_RESET_MASK);
+	if (ret)
+		dev_warn(&client->dev, "Failed to disable outputs (%pe)\n", ERR_PTR(ret));
+}
+
+static const struct of_device_id __maybe_unused rt4831_of_match[] = {
+	{ .compatible = "richtek,rt4831", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rt4831_of_match);
+
+static struct i2c_driver rt4831_driver = {
+	.driver = {
+		.name = "rt4831",
+		.of_match_table = rt4831_of_match,
+	},
+	.probe = rt4831_probe,
+	.remove = rt4831_remove,
+};
+module_i2c_driver(rt4831_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RT4831 core driver");
+MODULE_LICENSE("GPL v2");