Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 279 insertions, 0 deletions

diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
new file mode 100644
index 000000000..60204cc9a
--- /dev/null
+++ b/drivers/mfd/qcom-pm8008.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define I2C_INTR_STATUS_BASE		0x0550
+#define INT_RT_STS_OFFSET		0x10
+#define INT_SET_TYPE_OFFSET		0x11
+#define INT_POL_HIGH_OFFSET		0x12
+#define INT_POL_LOW_OFFSET		0x13
+#define INT_LATCHED_CLR_OFFSET		0x14
+#define INT_EN_SET_OFFSET		0x15
+#define INT_EN_CLR_OFFSET		0x16
+#define INT_LATCHED_STS_OFFSET		0x18
+
+enum {
+	PM8008_MISC,
+	PM8008_TEMP_ALARM,
+	PM8008_GPIO1,
+	PM8008_GPIO2,
+	PM8008_NUM_PERIPHS,
+};
+
+#define PM8008_PERIPH_0_BASE	0x900
+#define PM8008_PERIPH_1_BASE	0x2400
+#define PM8008_PERIPH_2_BASE	0xc000
+#define PM8008_PERIPH_3_BASE	0xc100
+
+#define PM8008_TEMP_ALARM_ADDR	PM8008_PERIPH_1_BASE
+#define PM8008_GPIO1_ADDR	PM8008_PERIPH_2_BASE
+#define PM8008_GPIO2_ADDR	PM8008_PERIPH_3_BASE
+
+/* PM8008 IRQ numbers */
+#define PM8008_IRQ_MISC_UVLO	0
+#define PM8008_IRQ_MISC_OVLO	1
+#define PM8008_IRQ_MISC_OTST2	2
+#define PM8008_IRQ_MISC_OTST3	3
+#define PM8008_IRQ_MISC_LDO_OCP	4
+#define PM8008_IRQ_TEMP_ALARM	5
+#define PM8008_IRQ_GPIO1	6
+#define PM8008_IRQ_GPIO2	7
+
+enum {
+	SET_TYPE_INDEX,
+	POLARITY_HI_INDEX,
+	POLARITY_LO_INDEX,
+};
+
+static const unsigned int pm8008_config_regs[] = {
+	INT_SET_TYPE_OFFSET,
+	INT_POL_HIGH_OFFSET,
+	INT_POL_LOW_OFFSET,
+};
+
+#define _IRQ(_irq, _off, _mask, _types)			\
+	[_irq] = {					\
+		.reg_offset = (_off),			\
+		.mask = (_mask),			\
+		.type = {				\
+			.type_reg_offset = (_off),	\
+			.types_supported = (_types),	\
+		},					\
+	}
+
+static const struct regmap_irq pm8008_irqs[] = {
+	_IRQ(PM8008_IRQ_MISC_UVLO,    PM8008_MISC,	BIT(0), IRQ_TYPE_EDGE_RISING),
+	_IRQ(PM8008_IRQ_MISC_OVLO,    PM8008_MISC,	BIT(1), IRQ_TYPE_EDGE_RISING),
+	_IRQ(PM8008_IRQ_MISC_OTST2,   PM8008_MISC,	BIT(2), IRQ_TYPE_EDGE_RISING),
+	_IRQ(PM8008_IRQ_MISC_OTST3,   PM8008_MISC,	BIT(3), IRQ_TYPE_EDGE_RISING),
+	_IRQ(PM8008_IRQ_MISC_LDO_OCP, PM8008_MISC,	BIT(4), IRQ_TYPE_EDGE_RISING),
+	_IRQ(PM8008_IRQ_TEMP_ALARM,   PM8008_TEMP_ALARM,BIT(0), IRQ_TYPE_SENSE_MASK),
+	_IRQ(PM8008_IRQ_GPIO1,	      PM8008_GPIO1,	BIT(0), IRQ_TYPE_SENSE_MASK),
+	_IRQ(PM8008_IRQ_GPIO2,	      PM8008_GPIO2,	BIT(0), IRQ_TYPE_SENSE_MASK),
+};
+
+static const unsigned int pm8008_periph_base[] = {
+	PM8008_PERIPH_0_BASE,
+	PM8008_PERIPH_1_BASE,
+	PM8008_PERIPH_2_BASE,
+	PM8008_PERIPH_3_BASE,
+};
+
+static unsigned int pm8008_get_irq_reg(struct regmap_irq_chip_data *data,
+				       unsigned int base, int index)
+{
+	/* Simple linear addressing for the main status register */
+	if (base == I2C_INTR_STATUS_BASE)
+		return base + index;
+
+	return pm8008_periph_base[index] + base;
+}
+
+static int pm8008_set_type_config(unsigned int **buf, unsigned int type,
+				  const struct regmap_irq *irq_data, int idx,
+				  void *irq_drv_data)
+{
+	switch (type) {
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		buf[POLARITY_HI_INDEX][idx] &= ~irq_data->mask;
+		buf[POLARITY_LO_INDEX][idx] |= irq_data->mask;
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		buf[POLARITY_HI_INDEX][idx] |= irq_data->mask;
+		buf[POLARITY_LO_INDEX][idx] &= ~irq_data->mask;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		buf[POLARITY_HI_INDEX][idx] |= irq_data->mask;
+		buf[POLARITY_LO_INDEX][idx] |= irq_data->mask;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		buf[SET_TYPE_INDEX][idx] |= irq_data->mask;
+	else
+		buf[SET_TYPE_INDEX][idx] &= ~irq_data->mask;
+
+	return 0;
+}
+
+static const struct regmap_irq_chip pm8008_irq_chip = {
+	.name			= "pm8008",
+	.main_status		= I2C_INTR_STATUS_BASE,
+	.num_main_regs		= 1,
+	.irqs			= pm8008_irqs,
+	.num_irqs		= ARRAY_SIZE(pm8008_irqs),
+	.num_regs		= PM8008_NUM_PERIPHS,
+	.status_base		= INT_LATCHED_STS_OFFSET,
+	.mask_base		= INT_EN_CLR_OFFSET,
+	.unmask_base		= INT_EN_SET_OFFSET,
+	.mask_unmask_non_inverted = true,
+	.ack_base		= INT_LATCHED_CLR_OFFSET,
+	.config_base		= pm8008_config_regs,
+	.num_config_bases	= ARRAY_SIZE(pm8008_config_regs),
+	.num_config_regs	= PM8008_NUM_PERIPHS,
+	.set_type_config	= pm8008_set_type_config,
+	.get_irq_reg		= pm8008_get_irq_reg,
+};
+
+static const struct regmap_config qcom_mfd_regmap_cfg = {
+	.name		= "primary",
+	.reg_bits	= 16,
+	.val_bits	= 8,
+	.max_register	= 0xffff,
+};
+
+static const struct regmap_config pm8008_regmap_cfg_2 = {
+	.name		= "secondary",
+	.reg_bits	= 16,
+	.val_bits	= 8,
+	.max_register	= 0xffff,
+};
+
+static const struct resource pm8008_temp_res[] = {
+	DEFINE_RES_MEM(PM8008_TEMP_ALARM_ADDR, 0x100),
+	DEFINE_RES_IRQ(PM8008_IRQ_TEMP_ALARM),
+};
+
+static const struct mfd_cell pm8008_cells[] = {
+	MFD_CELL_NAME("pm8008-regulator"),
+	MFD_CELL_RES("qpnp-temp-alarm", pm8008_temp_res),
+	MFD_CELL_NAME("pm8008-gpio"),
+};
+
+static void devm_irq_domain_fwnode_release(void *data)
+{
+	struct fwnode_handle *fwnode = data;
+
+	irq_domain_free_fwnode(fwnode);
+}
+
+static int pm8008_probe(struct i2c_client *client)
+{
+	struct regmap_irq_chip_data *irq_data;
+	struct device *dev = &client->dev;
+	struct regmap *regmap, *regmap2;
+	struct fwnode_handle *fwnode;
+	struct i2c_client *dummy;
+	struct gpio_desc *reset;
+	char *name;
+	int ret;
+
+	dummy = devm_i2c_new_dummy_device(dev, client->adapter, client->addr + 1);
+	if (IS_ERR(dummy)) {
+		ret = PTR_ERR(dummy);
+		dev_err(dev, "failed to claim second address: %d\n", ret);
+		return ret;
+	}
+
+	regmap2 = devm_regmap_init_i2c(dummy, &qcom_mfd_regmap_cfg);
+	if (IS_ERR(regmap2))
+		return PTR_ERR(regmap2);
+
+	ret = regmap_attach_dev(dev, regmap2, &pm8008_regmap_cfg_2);
+	if (ret)
+		return ret;
+
+	/* Default regmap must be attached last. */
+	regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+
+	/*
+	 * The PMIC does not appear to require a post-reset delay, but wait
+	 * for a millisecond for now anyway.
+	 */
+	usleep_range(1000, 2000);
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "%pOF-internal", dev->of_node);
+	if (!name)
+		return -ENOMEM;
+
+	name = strreplace(name, '/', ':');
+
+	fwnode = irq_domain_alloc_named_fwnode(name);
+	if (!fwnode)
+		return -ENOMEM;
+
+	ret = devm_add_action_or_reset(dev, devm_irq_domain_fwnode_release, fwnode);
+	if (ret)
+		return ret;
+
+	ret = devm_regmap_add_irq_chip_fwnode(dev, fwnode, regmap, client->irq,
+				IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data);
+	if (ret) {
+		dev_err(dev, "failed to add IRQ chip: %d\n", ret);
+		return ret;
+	}
+
+	/* Needed by GPIO driver. */
+	dev_set_drvdata(dev, regmap_irq_get_domain(irq_data));
+
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, pm8008_cells,
+				ARRAY_SIZE(pm8008_cells), NULL, 0,
+				regmap_irq_get_domain(irq_data));
+}
+
+static const struct of_device_id pm8008_match[] = {
+	{ .compatible = "qcom,pm8008", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pm8008_match);
+
+static struct i2c_driver pm8008_mfd_driver = {
+	.driver = {
+		.name = "pm8008",
+		.of_match_table = pm8008_match,
+	},
+	.probe = pm8008_probe,
+};
+module_i2c_driver(pm8008_mfd_driver);
+
+MODULE_DESCRIPTION("QCOM PM8008 Power Management IC driver");
+MODULE_LICENSE("GPL v2");