KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 152 insertions, 0 deletions

diff --git a/drivers/mfd/max77714.c b/drivers/mfd/max77714.c
new file mode 100644
index 000000000..c618605a3
--- /dev/null
+++ b/drivers/mfd/max77714.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Maxim MAX77714 Core Driver
+ *
+ * Copyright (C) 2022 Luca Ceresoli
+ * Author: Luca Ceresoli <luca.ceresoli@bootlin.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77714.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell max77714_cells[] = {
+	{ .name = "max77714-watchdog" },
+	{ .name = "max77714-rtc" },
+};
+
+static const struct regmap_range max77714_readable_ranges[] = {
+	regmap_reg_range(MAX77714_INT_TOP,     MAX77714_INT_TOP),
+	regmap_reg_range(MAX77714_INT_TOPM,    MAX77714_INT_TOPM),
+	regmap_reg_range(MAX77714_32K_STATUS,  MAX77714_32K_CONFIG),
+	regmap_reg_range(MAX77714_CNFG_GLBL2,  MAX77714_CNFG2_ONOFF),
+};
+
+static const struct regmap_range max77714_writable_ranges[] = {
+	regmap_reg_range(MAX77714_INT_TOPM,    MAX77714_INT_TOPM),
+	regmap_reg_range(MAX77714_32K_CONFIG,  MAX77714_32K_CONFIG),
+	regmap_reg_range(MAX77714_CNFG_GLBL2,  MAX77714_CNFG2_ONOFF),
+};
+
+static const struct regmap_access_table max77714_readable_table = {
+	.yes_ranges = max77714_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max77714_readable_ranges),
+};
+
+static const struct regmap_access_table max77714_writable_table = {
+	.yes_ranges = max77714_writable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max77714_writable_ranges),
+};
+
+static const struct regmap_config max77714_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77714_CNFG2_ONOFF,
+	.rd_table = &max77714_readable_table,
+	.wr_table = &max77714_writable_table,
+};
+
+static const struct regmap_irq max77714_top_irqs[] = {
+	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_ONOFF,   0, MAX77714_INT_TOP_ONOFF),
+	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_RTC,     0, MAX77714_INT_TOP_RTC),
+	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GPIO,    0, MAX77714_INT_TOP_GPIO),
+	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_LDO,     0, MAX77714_INT_TOP_LDO),
+	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_SD,      0, MAX77714_INT_TOP_SD),
+	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GLBL,    0, MAX77714_INT_TOP_GLBL),
+};
+
+static const struct regmap_irq_chip max77714_irq_chip = {
+	.name			= "max77714-pmic",
+	.status_base		= MAX77714_INT_TOP,
+	.mask_base		= MAX77714_INT_TOPM,
+	.num_regs		= 1,
+	.irqs			= max77714_top_irqs,
+	.num_irqs		= ARRAY_SIZE(max77714_top_irqs),
+};
+
+/*
+ * MAX77714 initially uses the internal, low precision oscillator. Enable
+ * the external oscillator by setting the XOSC_RETRY bit. If the external
+ * oscillator is not OK (probably not installed) this has no effect.
+ */
+static int max77714_setup_xosc(struct device *dev, struct regmap *regmap)
+{
+	/* Internal Crystal Load Capacitance, indexed by value of 32KLOAD bits */
+	static const unsigned int load_cap[4] = {0, 10, 12, 22}; /* pF */
+	unsigned int load_cap_idx;
+	unsigned int status;
+	int err;
+
+	err = regmap_update_bits(regmap, MAX77714_32K_CONFIG,
+				 MAX77714_32K_CONFIG_XOSC_RETRY,
+				 MAX77714_32K_CONFIG_XOSC_RETRY);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to configure the external oscillator\n");
+
+	err = regmap_read(regmap, MAX77714_32K_STATUS, &status);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to read external oscillator status\n");
+
+	load_cap_idx = (status >> MAX77714_32K_STATUS_32KLOAD_SHF)
+		& MAX77714_32K_STATUS_32KLOAD_MSK;
+
+	dev_info(dev, "Using %s oscillator, %d pF load cap\n",
+		 status & MAX77714_32K_STATUS_32KSOURCE ? "internal" : "external",
+		 load_cap[load_cap_idx]);
+
+	return 0;
+}
+
+static int max77714_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *irq_data;
+	int err;
+
+	regmap = devm_regmap_init_i2c(client, &max77714_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "Failed to initialise regmap\n");
+
+	err = max77714_setup_xosc(dev, regmap);
+	if (err)
+		return err;
+
+	err = devm_regmap_add_irq_chip(dev, regmap, client->irq,
+				       IRQF_ONESHOT | IRQF_SHARED, 0,
+				       &max77714_irq_chip, &irq_data);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to add PMIC IRQ chip\n");
+
+	err =  devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				    max77714_cells, ARRAY_SIZE(max77714_cells),
+				    NULL, 0, NULL);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to register child devices\n");
+
+	return 0;
+}
+
+static const struct of_device_id max77714_dt_match[] = {
+	{ .compatible = "maxim,max77714" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, max77714_dt_match);
+
+static struct i2c_driver max77714_driver = {
+	.driver = {
+		.name = "max77714",
+		.of_match_table = max77714_dt_match,
+	},
+	.probe = max77714_probe,
+};
+module_i2c_driver(max77714_driver);
+
+MODULE_DESCRIPTION("Maxim MAX77714 MFD core driver");
+MODULE_AUTHOR("Luca Ceresoli <luca.ceresoli@bootlin.com>");
+MODULE_LICENSE("GPL");