KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 170 insertions, 0 deletions

diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c
new file mode 100644
index 000000000..52fffed0c
--- /dev/null
+++ b/drivers/mfd/max7360.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Maxim MAX7360 Core Driver
+ *
+ * Copyright 2025 Bootlin
+ *
+ * Authors:
+ *    Kamel Bouhara <kamel.bouhara@bootlin.com>
+ *    Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/device/devres.h>
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max7360.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+static const struct mfd_cell max7360_cells[] = {
+	{ .name           = "max7360-pinctrl" },
+	{ .name           = "max7360-pwm" },
+	{ .name           = "max7360-keypad" },
+	{ .name           = "max7360-rotary" },
+	{
+		.name           = "max7360-gpo",
+		.of_compatible	= "maxim,max7360-gpo",
+	},
+	{
+		.name           = "max7360-gpio",
+		.of_compatible	= "maxim,max7360-gpio",
+	},
+};
+
+static const struct regmap_range max7360_volatile_ranges[] = {
+	regmap_reg_range(MAX7360_REG_KEYFIFO, MAX7360_REG_KEYFIFO),
+	regmap_reg_range(MAX7360_REG_I2C_TIMEOUT, MAX7360_REG_RTR_CNT),
+};
+
+static const struct regmap_access_table max7360_volatile_table = {
+	.yes_ranges = max7360_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges),
+};
+
+static const struct regmap_config max7360_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX7360_REG_PWMCFG(MAX7360_PORT_PWM_COUNT - 1),
+	.volatile_table = &max7360_volatile_table,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+static int max7360_mask_irqs(struct regmap *regmap)
+{
+	struct device *dev = regmap_get_device(regmap);
+	unsigned int val;
+	int ret;
+
+	/*
+	 * GPIO/PWM interrupts are not masked on reset: as the MAX7360 "INTI"
+	 * interrupt line is shared between GPIOs and rotary encoder, this could
+	 * result in repeated spurious interrupts on the rotary encoder driver
+	 * if the GPIO driver is not loaded. Mask them now to avoid this
+	 * situation.
+	 */
+	for (unsigned int i = 0; i < MAX7360_PORT_PWM_COUNT; i++) {
+		ret = regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i),
+					MAX7360_PORT_CFG_INTERRUPT_MASK,
+					MAX7360_PORT_CFG_INTERRUPT_MASK);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to write MAX7360 port configuration\n");
+	}
+
+	/* Read GPIO in register, to ACK any pending IRQ. */
+	ret = regmap_read(regmap, MAX7360_REG_GPIOIN, &val);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to read GPIO values\n");
+
+	return 0;
+}
+
+static int max7360_reset(struct regmap *regmap)
+{
+	struct device *dev = regmap_get_device(regmap);
+	int ret;
+
+	ret = regmap_write(regmap, MAX7360_REG_GPIOCFG, MAX7360_GPIO_CFG_GPIO_RST);
+	if (ret) {
+		dev_err(dev, "Failed to reset GPIO configuration: %x\n", ret);
+		return ret;
+	}
+
+	ret = regcache_drop_region(regmap, MAX7360_REG_GPIOCFG, MAX7360_REG_GPIO_LAST);
+	if (ret) {
+		dev_err(dev, "Failed to drop regmap cache: %x\n", ret);
+		return ret;
+	}
+
+	ret = regmap_write(regmap, MAX7360_REG_SLEEP, 0);
+	if (ret) {
+		dev_err(dev, "Failed to reset autosleep configuration: %x\n", ret);
+		return ret;
+	}
+
+	ret = regmap_write(regmap, MAX7360_REG_DEBOUNCE, 0);
+	if (ret)
+		dev_err(dev, "Failed to reset GPO port count: %x\n", ret);
+
+	return ret;
+}
+
+static int max7360_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+	int ret;
+
+	regmap = devm_regmap_init_i2c(client, &max7360_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialise regmap\n");
+
+	ret = max7360_reset(regmap);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to reset device\n");
+
+	/* Get the device out of shutdown mode. */
+	ret = regmap_write_bits(regmap, MAX7360_REG_GPIOCFG,
+				MAX7360_GPIO_CFG_GPIO_EN,
+				MAX7360_GPIO_CFG_GPIO_EN);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable GPIO and PWM module\n");
+
+	ret = max7360_mask_irqs(regmap);
+	if (ret)
+		return dev_err_probe(dev, ret, "Could not mask interrupts\n");
+
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				   max7360_cells, ARRAY_SIZE(max7360_cells),
+				   NULL, 0, NULL);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register child devices\n");
+
+	return 0;
+}
+
+static const struct of_device_id max7360_dt_match[] = {
+	{ .compatible = "maxim,max7360" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, max7360_dt_match);
+
+static struct i2c_driver max7360_driver = {
+	.driver = {
+		.name = "max7360",
+		.of_match_table = max7360_dt_match,
+	},
+	.probe = max7360_probe,
+};
+module_i2c_driver(max7360_driver);
+
+MODULE_DESCRIPTION("Maxim MAX7360 I2C IO Expander core driver");
+MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>");
+MODULE_LICENSE("GPL");