drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 188 insertions, 0 deletions

diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
new file mode 100644
index 000000000..d069165f9
--- /dev/null
+++ b/drivers/mfd/lpc_sch.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  lpc_sch.c - LPC interface for Intel Poulsbo SCH
+ *
+ *  LPC bridge function of the Intel SCH contains many other
+ *  functional units, such as Interrupt controllers, Timers,
+ *  Power Management, System Management, GPIO, RTC, and LPC
+ *  Configuration Registers.
+ *
+ *  Copyright (c) 2010 CompuLab Ltd
+ *  Copyright (c) 2014 Intel Corp.
+ *  Author: Denis Turischev <denis@compulab.co.il>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/mfd/core.h>
+
+#define SMBASE		0x40
+#define SMBUS_IO_SIZE	64
+
+#define GPIO_BASE	0x44
+#define GPIO_IO_SIZE	64
+#define GPIO_IO_SIZE_CENTERTON	128
+
+#define WDTBASE		0x84
+#define WDT_IO_SIZE	64
+
+enum sch_chipsets {
+	LPC_SCH = 0,		/* Intel Poulsbo SCH */
+	LPC_ITC,		/* Intel Tunnel Creek */
+	LPC_CENTERTON,		/* Intel Centerton */
+	LPC_QUARK_X1000,	/* Intel Quark X1000 */
+};
+
+struct lpc_sch_info {
+	unsigned int io_size_smbus;
+	unsigned int io_size_gpio;
+	unsigned int io_size_wdt;
+};
+
+static struct lpc_sch_info sch_chipset_info[] = {
+	[LPC_SCH] = {
+		.io_size_smbus = SMBUS_IO_SIZE,
+		.io_size_gpio = GPIO_IO_SIZE,
+	},
+	[LPC_ITC] = {
+		.io_size_smbus = SMBUS_IO_SIZE,
+		.io_size_gpio = GPIO_IO_SIZE,
+		.io_size_wdt = WDT_IO_SIZE,
+	},
+	[LPC_CENTERTON] = {
+		.io_size_smbus = SMBUS_IO_SIZE,
+		.io_size_gpio = GPIO_IO_SIZE_CENTERTON,
+		.io_size_wdt = WDT_IO_SIZE,
+	},
+	[LPC_QUARK_X1000] = {
+		.io_size_gpio = GPIO_IO_SIZE,
+		.io_size_wdt = WDT_IO_SIZE,
+	},
+};
+
+static const struct pci_device_id lpc_sch_ids[] = {
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC), .driver_data = LPC_SCH },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC), .driver_data = LPC_ITC },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB), .driver_data = LPC_CENTERTON },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB), .driver_data = LPC_QUARK_X1000 },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, lpc_sch_ids);
+
+#define LPC_NO_RESOURCE		1
+#define LPC_SKIP_RESOURCE	2
+
+static int lpc_sch_get_io(struct pci_dev *pdev, int where, const char *name,
+			  struct resource *res, int size)
+{
+	unsigned int base_addr_cfg;
+	unsigned short base_addr;
+
+	if (size == 0)
+		return LPC_NO_RESOURCE;
+
+	pci_read_config_dword(pdev, where, &base_addr_cfg);
+	base_addr = 0;
+	if (!(base_addr_cfg & (1 << 31)))
+		dev_warn(&pdev->dev, "Decode of the %s I/O range disabled\n",
+			 name);
+	else
+		base_addr = (unsigned short)base_addr_cfg;
+
+	if (base_addr == 0) {
+		dev_warn(&pdev->dev, "I/O space for %s uninitialized\n", name);
+		return LPC_SKIP_RESOURCE;
+	}
+
+	res->start = base_addr;
+	res->end = base_addr + size - 1;
+	res->flags = IORESOURCE_IO;
+
+	return 0;
+}
+
+static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
+				 const char *name, int size, int id,
+				 struct mfd_cell *cell)
+{
+	struct resource *res;
+	int ret;
+
+	res = devm_kzalloc(&pdev->dev, sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return -ENOMEM;
+
+	ret = lpc_sch_get_io(pdev, where, name, res, size);
+	if (ret)
+		return ret;
+
+	memset(cell, 0, sizeof(*cell));
+
+	cell->name = name;
+	cell->resources = res;
+	cell->num_resources = 1;
+	cell->ignore_resource_conflicts = true;
+	cell->id = id;
+
+	return 0;
+}
+
+static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct mfd_cell lpc_sch_cells[3];
+	struct lpc_sch_info *info = &sch_chipset_info[id->driver_data];
+	unsigned int cells = 0;
+	int ret;
+
+	ret = lpc_sch_populate_cell(dev, SMBASE, "isch_smbus",
+				    info->io_size_smbus,
+				    id->device, &lpc_sch_cells[cells]);
+	if (ret < 0)
+		return ret;
+	if (ret == 0)
+		cells++;
+
+	ret = lpc_sch_populate_cell(dev, GPIO_BASE, "sch_gpio",
+				    info->io_size_gpio,
+				    id->device, &lpc_sch_cells[cells]);
+	if (ret < 0)
+		return ret;
+	if (ret == 0)
+		cells++;
+
+	ret = lpc_sch_populate_cell(dev, WDTBASE, "ie6xx_wdt",
+				    info->io_size_wdt,
+				    id->device, &lpc_sch_cells[cells]);
+	if (ret < 0)
+		return ret;
+	if (ret == 0)
+		cells++;
+
+	if (cells == 0) {
+		dev_err(&dev->dev, "All decode registers disabled.\n");
+		return -ENODEV;
+	}
+
+	return mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
+}
+
+static void lpc_sch_remove(struct pci_dev *dev)
+{
+	mfd_remove_devices(&dev->dev);
+}
+
+static struct pci_driver lpc_sch_driver = {
+	.name		= "lpc_sch",
+	.id_table	= lpc_sch_ids,
+	.probe		= lpc_sch_probe,
+	.remove		= lpc_sch_remove,
+};
+
+module_pci_driver(lpc_sch_driver);
+
+MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
+MODULE_DESCRIPTION("LPC interface for Intel Poulsbo SCH");
+MODULE_LICENSE("GPL");