x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 127 insertions, 0 deletions

diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
new file mode 100644
index 000000000..9e8e3dcf4
--- /dev/null
+++ b/drivers/mfd/bcm2835-pm.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PM MFD driver for Broadcom BCM2835
+ *
+ * This driver binds to the PM block and creates the MFD device for
+ * the WDT and power drivers.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/bcm2835-pm.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+static const struct mfd_cell bcm2835_pm_devs[] = {
+	{ .name = "bcm2835-wdt" },
+};
+
+static const struct mfd_cell bcm2835_power_devs[] = {
+	{ .name = "bcm2835-power" },
+};
+
+static int bcm2835_pm_get_pdata(struct platform_device *pdev,
+				struct bcm2835_pm *pm)
+{
+	if (of_property_present(pm->dev->of_node, "reg-names")) {
+		struct resource *res;
+
+		pm->base = devm_platform_ioremap_resource_byname(pdev, "pm");
+		if (IS_ERR(pm->base))
+			return PTR_ERR(pm->base);
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "asb");
+		if (res) {
+			pm->asb = devm_ioremap_resource(&pdev->dev, res);
+			if (IS_ERR(pm->asb))
+				pm->asb = NULL;
+		}
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						    "rpivid_asb");
+		if (res) {
+			pm->rpivid_asb = devm_ioremap_resource(&pdev->dev, res);
+			if (IS_ERR(pm->rpivid_asb))
+				pm->rpivid_asb = NULL;
+		}
+
+		return 0;
+	}
+
+	/* If no 'reg-names' property is found we can assume we're using old DTB. */
+	pm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pm->base))
+		return PTR_ERR(pm->base);
+
+	pm->asb = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(pm->asb))
+		pm->asb = NULL;
+
+	pm->rpivid_asb = devm_platform_ioremap_resource(pdev, 2);
+	if (IS_ERR(pm->rpivid_asb))
+		pm->rpivid_asb = NULL;
+
+	return 0;
+}
+
+static int bcm2835_pm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm2835_pm *pm;
+	int ret;
+
+	pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL);
+	if (!pm)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, pm);
+
+	pm->dev = dev;
+	pm->soc = (uintptr_t)device_get_match_data(dev);
+
+	ret = bcm2835_pm_get_pdata(pdev, pm);
+	if (ret)
+		return ret;
+
+	ret = devm_mfd_add_devices(dev, -1,
+				   bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
+				   NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	/*
+	 * We'll use the presence of the AXI ASB regs in the
+	 * bcm2835-pm binding as the key for whether we can reference
+	 * the full PM register range and support power domains.
+	 */
+	if (pm->asb || pm->soc == BCM2835_PM_SOC_BCM2712)
+		return devm_mfd_add_devices(dev, -1, bcm2835_power_devs,
+					    ARRAY_SIZE(bcm2835_power_devs),
+					    NULL, 0, NULL);
+	return 0;
+}
+
+static const struct of_device_id bcm2835_pm_of_match[] = {
+	{ .compatible = "brcm,bcm2835-pm-wdt", },
+	{ .compatible = "brcm,bcm2835-pm", .data = (void *)BCM2835_PM_SOC_BCM2835 },
+	{ .compatible = "brcm,bcm2711-pm", .data = (void *)BCM2835_PM_SOC_BCM2711 },
+	{ .compatible = "brcm,bcm2712-pm", .data = (void *)BCM2835_PM_SOC_BCM2712 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
+
+static struct platform_driver bcm2835_pm_driver = {
+	.probe		= bcm2835_pm_probe,
+	.driver = {
+		.name =	"bcm2835-pm",
+		.of_match_table = bcm2835_pm_of_match,
+	},
+};
+module_platform_driver(bcm2835_pm_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM MFD");