Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 213 insertions, 0 deletions

diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
new file mode 100644
index 000000000..974197703
--- /dev/null
+++ b/drivers/mfd/as3711.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AS3711 PMIC MFC driver
+ *
+ * Copyright (C) 2012 Renesas Electronics Corporation
+ * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/as3711.h>
+#include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+enum {
+	AS3711_REGULATOR,
+	AS3711_BACKLIGHT,
+};
+
+/*
+ * Ok to have it static: it is only used during probing and multiple I2C devices
+ * cannot be probed simultaneously. Just make sure to avoid stale data.
+ */
+static struct mfd_cell as3711_subdevs[] = {
+	[AS3711_REGULATOR] = {.name = "as3711-regulator",},
+	[AS3711_BACKLIGHT] = {.name = "as3711-backlight",},
+};
+
+static bool as3711_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case AS3711_GPIO_SIGNAL_IN:
+	case AS3711_INTERRUPT_STATUS_1:
+	case AS3711_INTERRUPT_STATUS_2:
+	case AS3711_INTERRUPT_STATUS_3:
+	case AS3711_CHARGER_STATUS_1:
+	case AS3711_CHARGER_STATUS_2:
+	case AS3711_REG_STATUS:
+		return true;
+	}
+	return false;
+}
+
+static bool as3711_precious_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case AS3711_INTERRUPT_STATUS_1:
+	case AS3711_INTERRUPT_STATUS_2:
+	case AS3711_INTERRUPT_STATUS_3:
+		return true;
+	}
+	return false;
+}
+
+static bool as3711_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case AS3711_SD_1_VOLTAGE:
+	case AS3711_SD_2_VOLTAGE:
+	case AS3711_SD_3_VOLTAGE:
+	case AS3711_SD_4_VOLTAGE:
+	case AS3711_LDO_1_VOLTAGE:
+	case AS3711_LDO_2_VOLTAGE:
+	case AS3711_LDO_3_VOLTAGE:
+	case AS3711_LDO_4_VOLTAGE:
+	case AS3711_LDO_5_VOLTAGE:
+	case AS3711_LDO_6_VOLTAGE:
+	case AS3711_LDO_7_VOLTAGE:
+	case AS3711_LDO_8_VOLTAGE:
+	case AS3711_SD_CONTROL:
+	case AS3711_GPIO_SIGNAL_OUT:
+	case AS3711_GPIO_SIGNAL_IN:
+	case AS3711_SD_CONTROL_1:
+	case AS3711_SD_CONTROL_2:
+	case AS3711_CURR_CONTROL:
+	case AS3711_CURR1_VALUE:
+	case AS3711_CURR2_VALUE:
+	case AS3711_CURR3_VALUE:
+	case AS3711_STEPUP_CONTROL_1:
+	case AS3711_STEPUP_CONTROL_2:
+	case AS3711_STEPUP_CONTROL_4:
+	case AS3711_STEPUP_CONTROL_5:
+	case AS3711_REG_STATUS:
+	case AS3711_INTERRUPT_STATUS_1:
+	case AS3711_INTERRUPT_STATUS_2:
+	case AS3711_INTERRUPT_STATUS_3:
+	case AS3711_CHARGER_STATUS_1:
+	case AS3711_CHARGER_STATUS_2:
+	case AS3711_ASIC_ID_1:
+	case AS3711_ASIC_ID_2:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config as3711_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = as3711_volatile_reg,
+	.readable_reg = as3711_readable_reg,
+	.precious_reg = as3711_precious_reg,
+	.max_register = AS3711_MAX_REG,
+	.num_reg_defaults_raw = AS3711_NUM_REGS,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id as3711_of_match[] = {
+	{.compatible = "ams,as3711",},
+	{}
+};
+#endif
+
+static int as3711_i2c_probe(struct i2c_client *client)
+{
+	struct as3711 *as3711;
+	struct as3711_platform_data *pdata;
+	unsigned int id1, id2;
+	int ret;
+
+	if (!client->dev.of_node) {
+		pdata = dev_get_platdata(&client->dev);
+		if (!pdata)
+			dev_dbg(&client->dev, "Platform data not found\n");
+	} else {
+		pdata = devm_kzalloc(&client->dev,
+				     sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+	}
+
+	as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
+	if (!as3711)
+		return -ENOMEM;
+
+	as3711->dev = &client->dev;
+	i2c_set_clientdata(client, as3711);
+
+	if (client->irq)
+		dev_notice(&client->dev, "IRQ not supported yet\n");
+
+	as3711->regmap = devm_regmap_init_i2c(client, &as3711_regmap_config);
+	if (IS_ERR(as3711->regmap)) {
+		ret = PTR_ERR(as3711->regmap);
+		dev_err(&client->dev,
+			"regmap initialization failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_1, &id1);
+	if (!ret)
+		ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_2, &id2);
+	if (ret < 0) {
+		dev_err(&client->dev, "regmap_read() failed: %d\n", ret);
+		return ret;
+	}
+	if (id1 != 0x8b)
+		return -ENODEV;
+	dev_info(as3711->dev, "AS3711 detected: %x:%x\n", id1, id2);
+
+	/*
+	 * We can reuse as3711_subdevs[],
+	 * it will be copied in mfd_add_devices()
+	 */
+	if (pdata) {
+		as3711_subdevs[AS3711_REGULATOR].platform_data =
+			&pdata->regulator;
+		as3711_subdevs[AS3711_REGULATOR].pdata_size =
+			sizeof(pdata->regulator);
+		as3711_subdevs[AS3711_BACKLIGHT].platform_data =
+			&pdata->backlight;
+		as3711_subdevs[AS3711_BACKLIGHT].pdata_size =
+			sizeof(pdata->backlight);
+	} else {
+		as3711_subdevs[AS3711_REGULATOR].platform_data = NULL;
+		as3711_subdevs[AS3711_REGULATOR].pdata_size = 0;
+		as3711_subdevs[AS3711_BACKLIGHT].platform_data = NULL;
+		as3711_subdevs[AS3711_BACKLIGHT].pdata_size = 0;
+	}
+
+	ret = devm_mfd_add_devices(as3711->dev, -1, as3711_subdevs,
+				   ARRAY_SIZE(as3711_subdevs), NULL, 0, NULL);
+	if (ret < 0)
+		dev_err(&client->dev, "add mfd devices failed: %d\n", ret);
+
+	return ret;
+}
+
+static const struct i2c_device_id as3711_i2c_id[] = {
+	{.name = "as3711", .driver_data = 0},
+	{}
+};
+
+static struct i2c_driver as3711_i2c_driver = {
+	.driver = {
+		   .name = "as3711",
+		   .of_match_table = of_match_ptr(as3711_of_match),
+	},
+	.probe = as3711_i2c_probe,
+	.id_table = as3711_i2c_id,
+};
+
+static int __init as3711_i2c_init(void)
+{
+	return i2c_add_driver(&as3711_i2c_driver);
+}
+/* Initialise early */
+subsys_initcall(as3711_i2c_init);