drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 170 insertions, 0 deletions

diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
new file mode 100644
index 000000000..9c0262228
--- /dev/null
+++ b/drivers/mfd/altera-a10sr.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Altera Arria10 DevKit System Resource MFD Driver
+ *
+ * Author: Thor Thayer <tthayer@opensource.altera.com>
+ *
+ * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
+ *
+ * SPI access for Altera Arria10 MAX5 System Resource Chip
+ *
+ * Adapted from DA9052
+ */
+
+#include <linux/mfd/altera-a10sr.h>
+#include <linux/mfd/core.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+static const struct mfd_cell altr_a10sr_subdev_info[] = {
+	{
+		.name = "altr_a10sr_gpio",
+		.of_compatible = "altr,a10sr-gpio",
+	},
+	{
+		.name = "altr_a10sr_reset",
+		.of_compatible = "altr,a10sr-reset",
+	},
+};
+
+static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ALTR_A10SR_VERSION_READ:
+	case ALTR_A10SR_LED_REG:
+	case ALTR_A10SR_PBDSW_REG:
+	case ALTR_A10SR_PBDSW_IRQ_REG:
+	case ALTR_A10SR_PWR_GOOD1_REG:
+	case ALTR_A10SR_PWR_GOOD2_REG:
+	case ALTR_A10SR_PWR_GOOD3_REG:
+	case ALTR_A10SR_FMCAB_REG:
+	case ALTR_A10SR_HPS_RST_REG:
+	case ALTR_A10SR_USB_QSPI_REG:
+	case ALTR_A10SR_SFPA_REG:
+	case ALTR_A10SR_SFPB_REG:
+	case ALTR_A10SR_I2C_M_REG:
+	case ALTR_A10SR_WARM_RST_REG:
+	case ALTR_A10SR_WR_KEY_REG:
+	case ALTR_A10SR_PMBUS_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool altr_a10sr_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ALTR_A10SR_LED_REG:
+	case ALTR_A10SR_PBDSW_IRQ_REG:
+	case ALTR_A10SR_FMCAB_REG:
+	case ALTR_A10SR_HPS_RST_REG:
+	case ALTR_A10SR_USB_QSPI_REG:
+	case ALTR_A10SR_SFPA_REG:
+	case ALTR_A10SR_SFPB_REG:
+	case ALTR_A10SR_WARM_RST_REG:
+	case ALTR_A10SR_WR_KEY_REG:
+	case ALTR_A10SR_PMBUS_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool altr_a10sr_reg_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ALTR_A10SR_PBDSW_REG:
+	case ALTR_A10SR_PBDSW_IRQ_REG:
+	case ALTR_A10SR_PWR_GOOD1_REG:
+	case ALTR_A10SR_PWR_GOOD2_REG:
+	case ALTR_A10SR_PWR_GOOD3_REG:
+	case ALTR_A10SR_HPS_RST_REG:
+	case ALTR_A10SR_I2C_M_REG:
+	case ALTR_A10SR_WARM_RST_REG:
+	case ALTR_A10SR_WR_KEY_REG:
+	case ALTR_A10SR_PMBUS_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config altr_a10sr_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.cache_type = REGCACHE_NONE,
+
+	.use_single_read = true,
+	.use_single_write = true,
+	.read_flag_mask = 1,
+	.write_flag_mask = 0,
+
+	.max_register = ALTR_A10SR_WR_KEY_REG,
+	.readable_reg = altr_a10sr_reg_readable,
+	.writeable_reg = altr_a10sr_reg_writeable,
+	.volatile_reg = altr_a10sr_reg_volatile,
+
+};
+
+static int altr_a10sr_spi_probe(struct spi_device *spi)
+{
+	int ret;
+	struct altr_a10sr *a10sr;
+
+	a10sr = devm_kzalloc(&spi->dev, sizeof(*a10sr),
+			     GFP_KERNEL);
+	if (!a10sr)
+		return -ENOMEM;
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	a10sr->dev = &spi->dev;
+
+	spi_set_drvdata(spi, a10sr);
+
+	a10sr->regmap = devm_regmap_init_spi(spi, &altr_a10sr_regmap_config);
+	if (IS_ERR(a10sr->regmap)) {
+		ret = PTR_ERR(a10sr->regmap);
+		dev_err(&spi->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = devm_mfd_add_devices(a10sr->dev, PLATFORM_DEVID_AUTO,
+				   altr_a10sr_subdev_info,
+				   ARRAY_SIZE(altr_a10sr_subdev_info),
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(a10sr->dev, "Failed to register sub-devices: %d\n",
+			ret);
+
+	return ret;
+}
+
+static const struct of_device_id altr_a10sr_spi_of_match[] = {
+	{ .compatible = "altr,a10sr" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, altr_a10sr_spi_of_match);
+
+static const struct spi_device_id altr_a10sr_spi_ids[] = {
+	{ .name = "a10sr" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, altr_a10sr_spi_ids);
+
+static struct spi_driver altr_a10sr_spi_driver = {
+	.probe = altr_a10sr_spi_probe,
+	.driver = {
+		.name = "altr_a10sr",
+		.of_match_table = altr_a10sr_spi_of_match,
+	},
+	.id_table = altr_a10sr_spi_ids,
+};
+builtin_driver(altr_a10sr_spi_driver, spi_register_driver)