drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
new file mode 100644
index 000000000..b6b44e2e3
--- /dev/null
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AB8500 system control driver
+ *
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> for ST Ericsson.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/reboot.h>
+#include <linux/signal.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-sysctrl.h>
+
+/* RtcCtrl bits */
+#define AB8500_ALARM_MIN_LOW  0x08
+#define AB8500_ALARM_MIN_MID 0x09
+#define RTC_CTRL 0x0B
+#define RTC_ALARM_ENABLE 0x4
+
+static struct device *sysctrl_dev;
+
+static void ab8500_power_off(void)
+{
+	sigset_t old;
+	sigset_t all;
+	static const char * const pss[] = {"ab8500_ac", "ab8500_usb"};
+	int i;
+	bool charger_present = false;
+	union power_supply_propval val;
+	struct power_supply *psy;
+	int ret;
+
+	if (sysctrl_dev == NULL) {
+		pr_err("%s: sysctrl not initialized\n", __func__);
+		return;
+	}
+
+	/*
+	 * If we have a charger connected and we're powering off,
+	 * reboot into charge-only mode.
+	 */
+
+	for (i = 0; i < ARRAY_SIZE(pss); i++) {
+		psy = power_supply_get_by_name(pss[i]);
+		if (!psy)
+			continue;
+
+		ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE,
+				&val);
+		power_supply_put(psy);
+
+		if (!ret && val.intval) {
+			charger_present = true;
+			break;
+		}
+	}
+
+	if (!charger_present)
+		goto shutdown;
+
+	/* Check if battery is known */
+	psy = power_supply_get_by_name("ab8500_btemp");
+	if (psy) {
+		ret = power_supply_get_property(psy,
+				POWER_SUPPLY_PROP_TECHNOLOGY, &val);
+		if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) {
+			pr_info("Charger '%s' is connected with known battery",
+				pss[i]);
+			pr_info(" - Rebooting.\n");
+			machine_restart("charging");
+		}
+		power_supply_put(psy);
+	}
+
+shutdown:
+	sigfillset(&all);
+
+	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+		(void)ab8500_sysctrl_set(AB8500_STW4500CTRL1,
+					 AB8500_STW4500CTRL1_SWOFF |
+					 AB8500_STW4500CTRL1_SWRESET4500N);
+		(void)sigprocmask(SIG_SETMASK, &old, NULL);
+	}
+}
+
+static inline bool valid_bank(u8 bank)
+{
+	return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
+		(bank == AB8500_SYS_CTRL2_BLOCK));
+}
+
+int ab8500_sysctrl_read(u16 reg, u8 *value)
+{
+	u8 bank;
+
+	if (sysctrl_dev == NULL)
+		return -EPROBE_DEFER;
+
+	bank = (reg >> 8);
+	if (!valid_bank(bank))
+		return -EINVAL;
+
+	return abx500_get_register_interruptible(sysctrl_dev, bank,
+		(u8)(reg & 0xFF), value);
+}
+EXPORT_SYMBOL(ab8500_sysctrl_read);
+
+int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
+{
+	u8 bank;
+
+	if (sysctrl_dev == NULL)
+		return -EPROBE_DEFER;
+
+	bank = (reg >> 8);
+	if (!valid_bank(bank)) {
+		pr_err("invalid bank\n");
+		return -EINVAL;
+	}
+
+	return abx500_mask_and_set_register_interruptible(sysctrl_dev, bank,
+		(u8)(reg & 0xFF), mask, value);
+}
+EXPORT_SYMBOL(ab8500_sysctrl_write);
+
+static int ab8500_sysctrl_probe(struct platform_device *pdev)
+{
+	sysctrl_dev = &pdev->dev;
+
+	if (!pm_power_off)
+		pm_power_off = ab8500_power_off;
+
+	return 0;
+}
+
+static void ab8500_sysctrl_remove(struct platform_device *pdev)
+{
+	sysctrl_dev = NULL;
+
+	if (pm_power_off == ab8500_power_off)
+		pm_power_off = NULL;
+}
+
+static const struct of_device_id ab8500_sysctrl_match[] = {
+	{ .compatible = "stericsson,ab8500-sysctrl", },
+	{}
+};
+
+static struct platform_driver ab8500_sysctrl_driver = {
+	.driver = {
+		.name = "ab8500-sysctrl",
+		.of_match_table = ab8500_sysctrl_match,
+	},
+	.probe = ab8500_sysctrl_probe,
+	.remove = ab8500_sysctrl_remove,
+};
+
+static int __init ab8500_sysctrl_init(void)
+{
+	return platform_driver_register(&ab8500_sysctrl_driver);
+}
+arch_initcall(ab8500_sysctrl_init);