Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 446 insertions, 0 deletions

diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c
new file mode 100644
index 000000000..c8b83c9ed
--- /dev/null
+++ b/drivers/memory/ti-aemif.c
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI AEMIF driver
+ *
+ * Copyright (C) 2010 - 2013 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Authors:
+ * Murali Karicheri <m-karicheri2@ti.com>
+ * Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/memory/ti-aemif.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define TA_SHIFT	2
+#define RHOLD_SHIFT	4
+#define RSTROBE_SHIFT	7
+#define RSETUP_SHIFT	13
+#define WHOLD_SHIFT	17
+#define WSTROBE_SHIFT	20
+#define WSETUP_SHIFT	26
+#define EW_SHIFT	30
+#define SSTROBE_SHIFT	31
+
+#define TA(x)		((x) << TA_SHIFT)
+#define RHOLD(x)	((x) << RHOLD_SHIFT)
+#define RSTROBE(x)	((x) << RSTROBE_SHIFT)
+#define RSETUP(x)	((x) << RSETUP_SHIFT)
+#define WHOLD(x)	((x) << WHOLD_SHIFT)
+#define WSTROBE(x)	((x) << WSTROBE_SHIFT)
+#define WSETUP(x)	((x) << WSETUP_SHIFT)
+#define EW(x)		((x) << EW_SHIFT)
+#define SSTROBE(x)	((x) << SSTROBE_SHIFT)
+
+#define ASIZE_MAX	0x1
+#define TA_MAX		0x3
+#define RHOLD_MAX	0x7
+#define RSTROBE_MAX	0x3f
+#define RSETUP_MAX	0xf
+#define WHOLD_MAX	0x7
+#define WSTROBE_MAX	0x3f
+#define WSETUP_MAX	0xf
+#define EW_MAX		0x1
+#define SSTROBE_MAX	0x1
+#define NUM_CS		4
+
+#define TA_VAL(x)	(((x) & TA(TA_MAX)) >> TA_SHIFT)
+#define RHOLD_VAL(x)	(((x) & RHOLD(RHOLD_MAX)) >> RHOLD_SHIFT)
+#define RSTROBE_VAL(x)	(((x) & RSTROBE(RSTROBE_MAX)) >> RSTROBE_SHIFT)
+#define RSETUP_VAL(x)	(((x) & RSETUP(RSETUP_MAX)) >> RSETUP_SHIFT)
+#define WHOLD_VAL(x)	(((x) & WHOLD(WHOLD_MAX)) >> WHOLD_SHIFT)
+#define WSTROBE_VAL(x)	(((x) & WSTROBE(WSTROBE_MAX)) >> WSTROBE_SHIFT)
+#define WSETUP_VAL(x)	(((x) & WSETUP(WSETUP_MAX)) >> WSETUP_SHIFT)
+#define EW_VAL(x)	(((x) & EW(EW_MAX)) >> EW_SHIFT)
+#define SSTROBE_VAL(x)	(((x) & SSTROBE(SSTROBE_MAX)) >> SSTROBE_SHIFT)
+
+#define NRCSR_OFFSET	0x00
+#define AWCCR_OFFSET	0x04
+#define A1CR_OFFSET	0x10
+
+#define ACR_ASIZE_MASK	0x3
+#define ACR_EW_MASK	BIT(30)
+#define ACR_SSTROBE_MASK	BIT(31)
+#define ASIZE_16BIT	1
+
+#define TIMINGS_MASK	(TA(TA_MAX) | \
+			RHOLD(RHOLD_MAX) | \
+			RSTROBE(RSTROBE_MAX) |	\
+			RSETUP(RSETUP_MAX) | \
+			WHOLD(WHOLD_MAX) | \
+			WSTROBE(WSTROBE_MAX) | \
+			WSETUP(WSETUP_MAX))
+
+#define CONFIG_MASK	(EW(EW_MAX) | SSTROBE(SSTROBE_MAX) | ASIZE_MAX)
+
+/**
+ * struct aemif_cs_data: structure to hold CS parameters
+ * @timings: timings configuration
+ * @cs: chip-select number
+ * @enable_ss: enable/disable select strobe mode
+ * @enable_ew: enable/disable extended wait mode
+ * @asize: width of the asynchronous device's data bus
+ */
+struct aemif_cs_data {
+	struct aemif_cs_timings timings;
+	u8	cs;
+	u8	enable_ss;
+	u8	enable_ew;
+	u8	asize;
+};
+
+/**
+ * struct aemif_device: structure to hold device data
+ * @base: base address of AEMIF registers
+ * @clk: source clock
+ * @clk_rate: clock's rate in kHz
+ * @num_cs: number of assigned chip-selects
+ * @cs_offset: start number of cs nodes
+ * @cs_data: array of chip-select settings
+ * @config_cs_lock: lock used to access CS configuration
+ */
+struct aemif_device {
+	void __iomem *base;
+	struct clk *clk;
+	unsigned long clk_rate;
+	u8 num_cs;
+	int cs_offset;
+	struct aemif_cs_data cs_data[NUM_CS];
+	struct mutex config_cs_lock;
+};
+
+/**
+ * aemif_check_cs_timings() - Check the validity of a CS timing configuration.
+ * @timings: timings configuration
+ *
+ * @return: 0 if the timing configuration is valid, negative error number otherwise.
+ */
+int aemif_check_cs_timings(struct aemif_cs_timings *timings)
+{
+	if (timings->ta > TA_MAX)
+		return -EINVAL;
+
+	if (timings->rhold > RHOLD_MAX)
+		return -EINVAL;
+
+	if (timings->rstrobe > RSTROBE_MAX)
+		return -EINVAL;
+
+	if (timings->rsetup > RSETUP_MAX)
+		return -EINVAL;
+
+	if (timings->whold > WHOLD_MAX)
+		return -EINVAL;
+
+	if (timings->wstrobe > WSTROBE_MAX)
+		return -EINVAL;
+
+	if (timings->wsetup > WSETUP_MAX)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(aemif_check_cs_timings);
+
+/**
+ * aemif_set_cs_timings() - Set the timing configuration of a given chip select.
+ * @aemif: aemif device to configure
+ * @cs: index of the chip select to configure
+ * @timings: timings configuration to set
+ *
+ * @return: 0 on success, else negative errno.
+ */
+int aemif_set_cs_timings(struct aemif_device *aemif, u8 cs,
+			 struct aemif_cs_timings *timings)
+{
+	unsigned int offset;
+	u32 val, set;
+	int ret;
+
+	if (!timings || !aemif)
+		return -EINVAL;
+
+	if (cs > aemif->num_cs)
+		return -EINVAL;
+
+	ret = aemif_check_cs_timings(timings);
+	if (ret)
+		return ret;
+
+	set = TA(timings->ta) | RHOLD(timings->rhold) | RSTROBE(timings->rstrobe) |
+	      RSETUP(timings->rsetup) | WHOLD(timings->whold) |
+	      WSTROBE(timings->wstrobe) | WSETUP(timings->wsetup);
+
+	offset = A1CR_OFFSET + cs * 4;
+
+	mutex_lock(&aemif->config_cs_lock);
+	val = readl(aemif->base + offset);
+	val &= ~TIMINGS_MASK;
+	val |= set;
+	writel(val, aemif->base + offset);
+	mutex_unlock(&aemif->config_cs_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(aemif_set_cs_timings);
+
+/**
+ * aemif_calc_rate - calculate timing data.
+ * @pdev: platform device to calculate for
+ * @wanted: The cycle time needed in nanoseconds.
+ * @clk: The input clock rate in kHz.
+ *
+ * @return: the calculated timing value minus 1 for easy
+ * programming into AEMIF timing registers.
+ */
+static u32 aemif_calc_rate(struct platform_device *pdev, int wanted, unsigned long clk)
+{
+	int result;
+
+	result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
+
+	dev_dbg(&pdev->dev, "%s: result %d from %ld, %d\n", __func__, result,
+		clk, wanted);
+
+	/* It is generally OK to have a more relaxed timing than requested... */
+	if (result < 0)
+		result = 0;
+
+	return result;
+}
+
+/**
+ * aemif_config_abus - configure async bus parameters
+ * @pdev: platform device to configure for
+ * @csnum: aemif chip select number
+ *
+ * This function programs the given timing values (in real clock) into the
+ * AEMIF registers taking the AEMIF clock into account.
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+static int aemif_config_abus(struct platform_device *pdev, int csnum)
+{
+	struct aemif_device *aemif = platform_get_drvdata(pdev);
+	struct aemif_cs_data *data = &aemif->cs_data[csnum];
+	unsigned offset;
+	u32 set, val;
+
+	offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4;
+
+	set = (data->asize & ACR_ASIZE_MASK);
+	if (data->enable_ew)
+		set |= ACR_EW_MASK;
+	if (data->enable_ss)
+		set |= ACR_SSTROBE_MASK;
+
+	mutex_lock(&aemif->config_cs_lock);
+	val = readl(aemif->base + offset);
+	val &= ~CONFIG_MASK;
+	val |= set;
+	writel(val, aemif->base + offset);
+	mutex_unlock(&aemif->config_cs_lock);
+
+	return aemif_set_cs_timings(aemif, data->cs - aemif->cs_offset, &data->timings);
+}
+
+/**
+ * aemif_get_hw_params - function to read hw register values
+ * @pdev: platform device to read for
+ * @csnum: aemif chip select number
+ *
+ * This function reads the defaults from the registers and update
+ * the timing values. Required for get/set commands and also for
+ * the case when driver needs to use defaults in hardware.
+ */
+static void aemif_get_hw_params(struct platform_device *pdev, int csnum)
+{
+	struct aemif_device *aemif = platform_get_drvdata(pdev);
+	struct aemif_cs_data *data = &aemif->cs_data[csnum];
+	u32 val, offset;
+
+	offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4;
+	val = readl(aemif->base + offset);
+
+	data->timings.ta = TA_VAL(val);
+	data->timings.rhold = RHOLD_VAL(val);
+	data->timings.rstrobe = RSTROBE_VAL(val);
+	data->timings.rsetup = RSETUP_VAL(val);
+	data->timings.whold = WHOLD_VAL(val);
+	data->timings.wstrobe = WSTROBE_VAL(val);
+	data->timings.wsetup = WSETUP_VAL(val);
+	data->enable_ew = EW_VAL(val);
+	data->enable_ss = SSTROBE_VAL(val);
+	data->asize = val & ASIZE_MAX;
+}
+
+/**
+ * of_aemif_parse_abus_config - parse CS configuration from DT
+ * @pdev: platform device to parse for
+ * @np: device node ptr
+ *
+ * This function update the emif async bus configuration based on the values
+ * configured in a cs device binding node.
+ */
+static int of_aemif_parse_abus_config(struct platform_device *pdev,
+				      struct device_node *np)
+{
+	struct aemif_device *aemif = platform_get_drvdata(pdev);
+	unsigned long clk_rate = aemif->clk_rate;
+	struct aemif_cs_data *data;
+	u32 cs;
+	u32 val;
+
+	if (of_property_read_u32(np, "ti,cs-chipselect", &cs)) {
+		dev_dbg(&pdev->dev, "cs property is required");
+		return -EINVAL;
+	}
+
+	if (cs - aemif->cs_offset >= NUM_CS || cs < aemif->cs_offset) {
+		dev_dbg(&pdev->dev, "cs number is incorrect %d", cs);
+		return -EINVAL;
+	}
+
+	if (aemif->num_cs >= NUM_CS) {
+		dev_dbg(&pdev->dev, "cs count is more than %d", NUM_CS);
+		return -EINVAL;
+	}
+
+	data = &aemif->cs_data[aemif->num_cs];
+	data->cs = cs;
+
+	/* read the current value in the hw register */
+	aemif_get_hw_params(pdev, aemif->num_cs++);
+
+	/* override the values from device node */
+	if (!of_property_read_u32(np, "ti,cs-min-turnaround-ns", &val))
+		data->timings.ta = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-read-hold-ns", &val))
+		data->timings.rhold = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-read-strobe-ns", &val))
+		data->timings.rstrobe = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-read-setup-ns", &val))
+		data->timings.rsetup = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-write-hold-ns", &val))
+		data->timings.whold = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-write-strobe-ns", &val))
+		data->timings.wstrobe = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-write-setup-ns", &val))
+		data->timings.wsetup = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-bus-width", &val))
+		if (val == 16)
+			data->asize = 1;
+	data->enable_ew = of_property_read_bool(np, "ti,cs-extended-wait-mode");
+	data->enable_ss = of_property_read_bool(np, "ti,cs-select-strobe-mode");
+
+	return aemif_check_cs_timings(&data->timings);
+}
+
+static const struct of_device_id aemif_of_match[] = {
+	{ .compatible = "ti,davinci-aemif", },
+	{ .compatible = "ti,da850-aemif", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, aemif_of_match);
+
+static int aemif_probe(struct platform_device *pdev)
+{
+	int i;
+	int ret = -ENODEV;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct aemif_device *aemif;
+
+	aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL);
+	if (!aemif)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, aemif);
+
+	aemif->clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(aemif->clk))
+		return dev_err_probe(dev, PTR_ERR(aemif->clk),
+				     "cannot get clock 'aemif'\n");
+
+	aemif->clk_rate = clk_get_rate(aemif->clk) / MSEC_PER_SEC;
+
+	if (np && of_device_is_compatible(np, "ti,da850-aemif"))
+		aemif->cs_offset = 2;
+
+	aemif->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(aemif->base))
+		return PTR_ERR(aemif->base);
+
+	mutex_init(&aemif->config_cs_lock);
+	if (np) {
+		/*
+		 * For every controller device node, there is a cs device node
+		 * that describe the bus configuration parameters. This
+		 * functions iterate over these nodes and update the cs data
+		 * array.
+		 */
+		for_each_available_child_of_node_scoped(np, child_np) {
+			ret = of_aemif_parse_abus_config(pdev, child_np);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	for (i = 0; i < aemif->num_cs; i++) {
+		ret = aemif_config_abus(pdev, i);
+		if (ret < 0) {
+			dev_err(dev, "Error configuring chip select %d\n",
+				aemif->cs_data[i].cs);
+			return ret;
+		}
+	}
+
+	/*
+	 * Create a child devices explicitly from here to guarantee that the
+	 * child will be probed after the AEMIF timing parameters are set.
+	 */
+	if (np) {
+		for_each_available_child_of_node_scoped(np, child_np) {
+			ret = of_platform_populate(child_np, NULL, NULL, dev);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver aemif_driver = {
+	.probe = aemif_probe,
+	.driver = {
+		.name = "ti-aemif",
+		.of_match_table = of_match_ptr(aemif_of_match),
+	},
+};
+
+module_platform_driver(aemif_driver);
+
+MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
+MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
+MODULE_DESCRIPTION("Texas Instruments AEMIF driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);