drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 300 insertions, 0 deletions

diff --git a/drivers/memory/pl172.c b/drivers/memory/pl172.c
new file mode 100644
index 000000000..be7ba599c
--- /dev/null
+++ b/drivers/memory/pl172.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Memory controller driver for ARM PrimeCell PL172
+ * PrimeCell MultiPort Memory Controller (PL172)
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on:
+ * TI AEMIF driver, Copyright (C) 2010 - 2013 Texas Instruments Inc.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/time.h>
+
+#define MPMC_STATIC_CFG(n)		(0x200 + 0x20 * (n))
+#define  MPMC_STATIC_CFG_MW_8BIT	0x0
+#define  MPMC_STATIC_CFG_MW_16BIT	0x1
+#define  MPMC_STATIC_CFG_MW_32BIT	0x2
+#define  MPMC_STATIC_CFG_PM		BIT(3)
+#define  MPMC_STATIC_CFG_PC		BIT(6)
+#define  MPMC_STATIC_CFG_PB		BIT(7)
+#define  MPMC_STATIC_CFG_EW		BIT(8)
+#define  MPMC_STATIC_CFG_B		BIT(19)
+#define  MPMC_STATIC_CFG_P		BIT(20)
+#define MPMC_STATIC_WAIT_WEN(n)		(0x204 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_WEN_MAX	0x0f
+#define MPMC_STATIC_WAIT_OEN(n)		(0x208 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_OEN_MAX	0x0f
+#define MPMC_STATIC_WAIT_RD(n)		(0x20c + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_RD_MAX	0x1f
+#define MPMC_STATIC_WAIT_PAGE(n)	(0x210 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_PAGE_MAX	0x1f
+#define MPMC_STATIC_WAIT_WR(n)		(0x214 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_WR_MAX	0x1f
+#define MPMC_STATIC_WAIT_TURN(n)	(0x218 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_TURN_MAX	0x0f
+
+/* Maximum number of static chip selects */
+#define PL172_MAX_CS		4
+
+struct pl172_data {
+	void __iomem *base;
+	unsigned long rate;
+	struct clk *clk;
+};
+
+static int pl172_timing_prop(struct amba_device *adev,
+			     const struct device_node *np, const char *name,
+			     u32 reg_offset, u32 max, int start)
+{
+	struct pl172_data *pl172 = amba_get_drvdata(adev);
+	int cycles;
+	u32 val;
+
+	if (!of_property_read_u32(np, name, &val)) {
+		cycles = DIV_ROUND_UP(val * pl172->rate, NSEC_PER_MSEC) - start;
+		if (cycles < 0) {
+			cycles = 0;
+		} else if (cycles > max) {
+			dev_err(&adev->dev, "%s timing too tight\n", name);
+			return -EINVAL;
+		}
+
+		writel(cycles, pl172->base + reg_offset);
+	}
+
+	dev_dbg(&adev->dev, "%s: %u cycle(s)\n", name, start +
+				readl(pl172->base + reg_offset));
+
+	return 0;
+}
+
+static int pl172_setup_static(struct amba_device *adev,
+			      struct device_node *np, u32 cs)
+{
+	struct pl172_data *pl172 = amba_get_drvdata(adev);
+	u32 cfg;
+	int ret;
+
+	/* MPMC static memory configuration */
+	if (!of_property_read_u32(np, "mpmc,memory-width", &cfg)) {
+		if (cfg == 8) {
+			cfg = MPMC_STATIC_CFG_MW_8BIT;
+		} else if (cfg == 16) {
+			cfg = MPMC_STATIC_CFG_MW_16BIT;
+		} else if (cfg == 32) {
+			cfg = MPMC_STATIC_CFG_MW_32BIT;
+		} else {
+			dev_err(&adev->dev, "invalid memory width cs%u\n", cs);
+			return -EINVAL;
+		}
+	} else {
+		dev_err(&adev->dev, "memory-width property required\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(np, "mpmc,async-page-mode"))
+		cfg |= MPMC_STATIC_CFG_PM;
+
+	if (of_property_read_bool(np, "mpmc,cs-active-high"))
+		cfg |= MPMC_STATIC_CFG_PC;
+
+	if (of_property_read_bool(np, "mpmc,byte-lane-low"))
+		cfg |= MPMC_STATIC_CFG_PB;
+
+	if (of_property_read_bool(np, "mpmc,extended-wait"))
+		cfg |= MPMC_STATIC_CFG_EW;
+
+	if (amba_part(adev) == 0x172 &&
+	    of_property_read_bool(np, "mpmc,buffer-enable"))
+		cfg |= MPMC_STATIC_CFG_B;
+
+	if (of_property_read_bool(np, "mpmc,write-protect"))
+		cfg |= MPMC_STATIC_CFG_P;
+
+	writel(cfg, pl172->base + MPMC_STATIC_CFG(cs));
+	dev_dbg(&adev->dev, "mpmc static config cs%u: 0x%08x\n", cs, cfg);
+
+	/* MPMC static memory timing */
+	ret = pl172_timing_prop(adev, np, "mpmc,write-enable-delay",
+				MPMC_STATIC_WAIT_WEN(cs),
+				MPMC_STATIC_WAIT_WEN_MAX, 1);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,output-enable-delay",
+				MPMC_STATIC_WAIT_OEN(cs),
+				MPMC_STATIC_WAIT_OEN_MAX, 0);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,read-access-delay",
+				MPMC_STATIC_WAIT_RD(cs),
+				MPMC_STATIC_WAIT_RD_MAX, 1);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,page-mode-read-delay",
+				MPMC_STATIC_WAIT_PAGE(cs),
+				MPMC_STATIC_WAIT_PAGE_MAX, 1);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,write-access-delay",
+				MPMC_STATIC_WAIT_WR(cs),
+				MPMC_STATIC_WAIT_WR_MAX, 2);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,turn-round-delay",
+				MPMC_STATIC_WAIT_TURN(cs),
+				MPMC_STATIC_WAIT_TURN_MAX, 1);
+	if (ret)
+		goto fail;
+
+	return 0;
+fail:
+	dev_err(&adev->dev, "failed to configure cs%u\n", cs);
+	return ret;
+}
+
+static int pl172_parse_cs_config(struct amba_device *adev,
+				 struct device_node *np)
+{
+	u32 cs;
+
+	if (!of_property_read_u32(np, "mpmc,cs", &cs)) {
+		if (cs >= PL172_MAX_CS) {
+			dev_err(&adev->dev, "cs%u invalid\n", cs);
+			return -EINVAL;
+		}
+
+		return pl172_setup_static(adev, np, cs);
+	}
+
+	dev_err(&adev->dev, "cs property required\n");
+
+	return -EINVAL;
+}
+
+static void pl172_amba_release_regions(void *data)
+{
+	struct amba_device *adev = data;
+
+	amba_release_regions(adev);
+}
+
+static const char * const pl172_revisions[] = {"r1", "r2", "r2p3", "r2p4"};
+static const char * const pl175_revisions[] = {"r1"};
+static const char * const pl176_revisions[] = {"r0"};
+
+static int pl172_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	struct device_node *child_np, *np = adev->dev.of_node;
+	struct device *dev = &adev->dev;
+	static const char *rev = "?";
+	struct pl172_data *pl172;
+	int ret;
+
+	if (amba_part(adev) == 0x172) {
+		if (amba_rev(adev) < ARRAY_SIZE(pl172_revisions))
+			rev = pl172_revisions[amba_rev(adev)];
+	} else if (amba_part(adev) == 0x175) {
+		if (amba_rev(adev) < ARRAY_SIZE(pl175_revisions))
+			rev = pl175_revisions[amba_rev(adev)];
+	} else if (amba_part(adev) == 0x176) {
+		if (amba_rev(adev) < ARRAY_SIZE(pl176_revisions))
+			rev = pl176_revisions[amba_rev(adev)];
+	}
+
+	dev_info(dev, "ARM PL%x revision %s\n", amba_part(adev), rev);
+
+	pl172 = devm_kzalloc(dev, sizeof(*pl172), GFP_KERNEL);
+	if (!pl172)
+		return -ENOMEM;
+
+	pl172->clk = devm_clk_get_enabled(dev, "mpmcclk");
+	if (IS_ERR(pl172->clk))
+		return dev_err_probe(dev, PTR_ERR(pl172->clk),
+				     "no mpmcclk provided clock\n");
+
+	pl172->rate = clk_get_rate(pl172->clk) / MSEC_PER_SEC;
+	if (!pl172->rate)
+		return dev_err_probe(dev, -EINVAL,
+				     "unable to get mpmcclk clock rate\n");
+
+	ret = amba_request_regions(adev, NULL);
+	if (ret) {
+		dev_err(dev, "unable to request AMBA regions\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, pl172_amba_release_regions, adev);
+	if (ret)
+		return ret;
+
+	pl172->base = devm_ioremap(dev, adev->res.start,
+				   resource_size(&adev->res));
+	if (!pl172->base)
+		return dev_err_probe(dev, -ENOMEM, "ioremap failed\n");
+
+	amba_set_drvdata(adev, pl172);
+
+	/*
+	 * Loop through each child node, which represent a chip select, and
+	 * configure parameters and timing. If successful; populate devices
+	 * under that node.
+	 */
+	for_each_available_child_of_node(np, child_np) {
+		ret = pl172_parse_cs_config(adev, child_np);
+		if (ret)
+			continue;
+
+		of_platform_populate(child_np, NULL, NULL, dev);
+	}
+
+	return 0;
+}
+
+static const struct amba_id pl172_ids[] = {
+	/*  PrimeCell MPMC PL172, EMC found on NXP LPC18xx and LPC43xx */
+	{
+		.id	= 0x07041172,
+		.mask	= 0x3f0fffff,
+	},
+	/* PrimeCell MPMC PL175, EMC found on NXP LPC32xx */
+	{
+		.id	= 0x07041175,
+		.mask	= 0x3f0fffff,
+	},
+	/* PrimeCell MPMC PL176 */
+	{
+		.id	= 0x89041176,
+		.mask	= 0xff0fffff,
+	},
+	{ 0, 0 },
+};
+MODULE_DEVICE_TABLE(amba, pl172_ids);
+
+static struct amba_driver pl172_driver = {
+	.drv = {
+		.name	= "memory-pl172",
+	},
+	.probe		= pl172_probe,
+	.id_table	= pl172_ids,
+};
+module_amba_driver(pl172_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("PL172 Memory Controller Driver");
+MODULE_LICENSE("GPL v2");