coccinelle: alloc_cast: drop removed allocatorsgrafted

- pci_alloc_consistent() and pci_zalloc_consistent() were removed by
  commit 7968778914e5
  ("PCI: Remove the deprecated "pci-dma-compat.h" API")

- kmem_alloc() was removed by commit f078d4ea8276
  ("xfs: convert kmem_alloc() to kmalloc()")

- kmem_zalloc() was removed by commit 10634530f7ba
  ("xfs: convert kmem_zalloc() to kzalloc()")

- kmem_zone_alloc() and kmem_zone_zalloc() were removed by commit
  bae633a4a283 ("xfs: remove xfs_zone_{alloc,zalloc} helpers")

So drop them from the rules.

No functional change.

Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

45 files changed, 17192 insertions, 0 deletions

diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
new file mode 100644
index 000000000..bbbdd054b
--- /dev/null
+++ b/drivers/media/radio/Kconfig
@@ -0,0 +1,488 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Multimedia Video device configuration
+#
+
+menuconfig RADIO_ADAPTERS
+	tristate "Radio Adapters"
+	depends on VIDEO_DEV
+	depends on MEDIA_RADIO_SUPPORT
+	default VIDEO_DEV
+	help
+	  Say Y here to enable selecting AM/FM radio adapters.
+
+if RADIO_ADAPTERS
+
+config RADIO_MAXIRADIO
+	tristate "Guillemot MAXI Radio FM 2000 radio"
+	depends on PCI && HAS_IOPORT
+	select RADIO_TEA575X
+	help
+	  Choose Y here if you have this radio card.  This card may also be
+	  found as Gemtek PCI FM.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux API.  Information on
+	  this API and pointers to "v4l" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-maxiradio.
+
+config RADIO_SAA7706H
+	tristate "SAA7706H Car Radio DSP"
+	depends on I2C
+	help
+	  Say Y here if you want to use the SAA7706H Car radio Digital
+	  Signal Processor, found for instance on the Russellville development
+	  board. On the russellville the device is connected to internal
+	  timberdale I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called SAA7706H.
+
+config RADIO_SHARK
+	tristate "Griffin radioSHARK USB radio receiver"
+	depends on USB
+	select RADIO_TEA575X
+	help
+	  Choose Y here if you have this radio receiver.
+
+	  There are 2 versions of this device, this driver is for version 1,
+	  which is white.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux API.  Information on
+	  this API and pointers to "v4l" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-shark.
+
+config RADIO_SHARK2
+	tristate "Griffin radioSHARK2 USB radio receiver"
+	depends on USB
+	help
+	  Choose Y here if you have this radio receiver.
+
+	  There are 2 versions of this device, this driver is for version 2,
+	  which is black.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux API.  Information on
+	  this API and pointers to "v4l" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-shark2.
+
+config RADIO_SI4713
+	tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
+
+config RADIO_SI476X
+	tristate "Silicon Laboratories Si476x I2C FM Radio"
+	depends on I2C
+	depends on MFD_SI476X_CORE
+	depends on SND_SOC
+	select SND_SOC_SI476X
+	help
+	  Choose Y here if you have this FM radio chip.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux 2 API.  Information on
+	  this API and pointers to "v4l2" programs may be found at
+	  <file:Documentation/userspace-api/media/index.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-si476x.
+
+config RADIO_TEA575X
+	tristate
+
+config RADIO_TEA5764
+	tristate "TEA5764 I2C FM radio support"
+	depends on I2C
+	help
+	  Say Y here if you want to use the TEA5764 FM chip found in
+	  EZX phones. This FM chip is present in EZX phones from Motorola,
+	  connected to internal pxa I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-tea5764.
+
+config RADIO_TEA5764_XTAL
+	bool "TEA5764 crystal reference"
+	depends on RADIO_TEA5764=y
+	default y
+	help
+	  Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
+	  here if TEA5764 reference frequency is connected in FREQIN.
+
+config RADIO_TEF6862
+	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
+	depends on I2C
+	help
+	  Say Y here if you want to use the TEF6862 Car Radio Enhanced
+	  Selectivity Tuner, found for instance on the Russellville development
+	  board. On the russellville the device is connected to internal
+	  timberdale I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called TEF6862.
+
+config RADIO_TIMBERDALE
+	tristate "Enable the Timberdale radio driver"
+	depends on MFD_TIMBERDALE
+	depends on I2C	# for RADIO_SAA7706H
+	select RADIO_TEF6862
+	select RADIO_SAA7706H
+	help
+	  This is a kind of umbrella driver for the Radio Tuner and DSP
+	  found behind the Timberdale FPGA on the Russellville board.
+	  Enabling this driver will automatically select the DSP and tuner.
+
+config USB_DSBR
+	tristate "D-Link/GemTek USB FM radio support"
+	depends on USB
+	help
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dsbr100.
+
+config USB_KEENE
+	tristate "Keene FM Transmitter USB support"
+	depends on USB
+	help
+	  Say Y here if you want to connect this type of FM transmitter
+	  to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-keene.
+
+config USB_MA901
+	tristate "Masterkit MA901 USB FM radio support"
+	depends on USB
+	help
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers or headphones.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-ma901.
+
+config USB_MR800
+	tristate "AverMedia MR 800 USB FM radio support"
+	depends on USB
+	help
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-mr800.
+
+config USB_RAREMONO
+	tristate "Thanko's Raremono AM/FM/SW radio support"
+	depends on USB
+	help
+	  The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
+	  It is one of the very few or perhaps the only consumer USB radio device
+	  to receive the AM/FM/SW bands.
+
+	  Say Y here if you want to connect this type of AM/FM/SW receiver
+	  to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-raremono.
+
+source "drivers/media/radio/si470x/Kconfig"
+source "drivers/media/radio/si4713/Kconfig"
+
+#
+# ISA drivers configuration
+#
+
+menuconfig V4L_RADIO_ISA_DRIVERS
+	bool "ISA radio devices"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	help
+	  Say Y here to enable support for these ISA drivers.
+
+if V4L_RADIO_ISA_DRIVERS
+
+config RADIO_AZTECH
+	tristate "Aztech/Packard Bell Radio"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have one of these FM radio cards, and then fill
+	  in the port address below.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-aztech.
+
+config RADIO_AZTECH_PORT
+	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
+	depends on RADIO_AZTECH=y
+	default "350"
+	help
+	  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
+	  haven't changed the setting of jumper JP3 on the card.  Removing the
+	  jumper sets the card to 0x358.
+
+config RADIO_CADET
+	tristate "ADS Cadet AM/FM Tuner"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	help
+	  Choose Y here if you have one of these AM/FM radio cards, and then
+	  fill in the port address below.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-cadet.
+
+config RADIO_GEMTEK
+	tristate "GemTek Radio card (or compatible) support"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have this FM radio card, and then fill in the
+	  I/O port address and settings below. The following cards either have
+	  GemTek Radio tuner or are rebranded GemTek Radio cards:
+
+	  - Sound Vision 16 Gold with FM Radio
+	  - Typhoon Radio card (some models)
+	  - Hama Radio card
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-gemtek.
+
+config RADIO_GEMTEK_PORT
+	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
+	depends on RADIO_GEMTEK=y
+	default "34c"
+	help
+	  Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
+	  card default is 0x34c, if you haven't changed the jumper setting
+	  on the card.
+
+	  On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
+	  port is 0x20c, 0x248 or 0x28c.
+
+	  If automatic I/O port probing is enabled this port will be used only
+	  in case of automatic probing failure, ie. as a fallback.
+
+config RADIO_GEMTEK_PROBE
+	bool "Automatic I/O port probing"
+	depends on RADIO_GEMTEK=y
+	default y
+	help
+	  Say Y here to enable automatic probing for GemTek Radio card. The
+	  following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
+	  0x28c.
+
+config RADIO_ISA
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	tristate
+
+config RADIO_MIROPCM20
+	tristate "miroSOUND PCM20 radio"
+	depends on ISA || COMPILE_TEST
+	depends on ISA_DMA_API && SND
+	select SND_ISA
+	select SND_MIRO
+	help
+	  Choose Y here if you have this FM radio card. You also need to enable
+	  the ALSA sound system. This choice automatically selects the ALSA
+	  sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
+	  is required for the radio-miropcm20.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-miropcm20.
+
+config RADIO_RTRACK
+	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have one of these FM radio cards, and then fill
+	  in the port address below.
+
+	  Note that newer AIMSlab RadioTrack cards have a different chipset
+	  and are not supported by this driver.  For these cards, use the
+	  RadioTrack II driver below.
+
+	  If you have a GemTeks combined (PnP) sound- and radio card you must
+	  use this driver as a module and setup the card with isapnptools.
+	  You must also pass the module a suitable io parameter, 0x248 has
+	  been reported to be used by these cards.
+
+	  More information is contained in the file
+	  <file:Documentation/driver-api/media/drivers/radiotrack.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-aimslab.
+
+config RADIO_RTRACK2
+	tristate "AIMSlab RadioTrack II support"
+	depends on ISA || COMPILE_TEST
+	select RADIO_ISA
+	help
+	  Choose Y here if you have this FM radio card, and then fill in the
+	  port address below.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-rtrack2.
+
+config RADIO_RTRACK2_PORT
+	hex "RadioTrack II i/o port (0x20c or 0x30c)"
+	depends on RADIO_RTRACK2=y
+	default "30c"
+	help
+	  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
+	  haven't changed the jumper setting on the card.
+
+config RADIO_RTRACK_PORT
+	hex "RadioTrack i/o port (0x20f or 0x30f)"
+	depends on RADIO_RTRACK=y
+	default "30f"
+	help
+	  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
+	  haven't changed the jumper setting on the card.
+
+config RADIO_SF16FMI
+	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	help
+	  Choose Y here if you have one of these FM radio cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-sf16fmi.
+
+config RADIO_SF16FMR2
+	tristate "SF16-FMR2/SF16-FMD2 Radio"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_TEA575X
+	help
+	  Choose Y here if you have one of these FM radio cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-sf16fmr2.
+
+config RADIO_TERRATEC
+	tristate "TerraTec ActiveRadio ISA Standalone"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have this FM radio card.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-terratec.
+
+config RADIO_TRUST
+	tristate "Trust FM radio card"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  This is a driver for the Trust FM radio cards. Say Y if you have
+	  such a card and want to use it under Linux.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-trust.
+
+config RADIO_TRUST_PORT
+	hex "Trust i/o port (usually 0x350 or 0x358)"
+	depends on RADIO_TRUST=y
+	default "350"
+	help
+	  Enter the I/O port of your Trust FM radio card. If unsure, try the
+	  values "0x350" or "0x358".
+
+config RADIO_TYPHOON
+	tristate "Typhoon Radio (a.k.a. EcoRadio)"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have one of these FM radio cards, and then fill
+	  in the port address and the frequency used for muting below.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-typhoon.
+
+config RADIO_TYPHOON_MUTEFREQ
+	int "Typhoon frequency set when muting the device (kHz)"
+	depends on RADIO_TYPHOON=y
+	default "87500"
+	help
+	  Enter the frequency used for muting the radio. The device is never
+	  completely silent. If the volume is just turned down, you can still
+	  hear silent voices and music. For that reason, the frequency of the
+	  radio device is set to the frequency you can enter here whenever
+	  the device is muted. There should be no local radio station at that
+	  frequency.
+
+config RADIO_TYPHOON_PORT
+	hex "Typhoon I/O port (0x316 or 0x336)"
+	depends on RADIO_TYPHOON=y
+	default "316"
+	help
+	  Enter the I/O port of your Typhoon or EcoRadio radio card.
+
+config RADIO_ZOLTRIX
+	tristate "Zoltrix Radio"
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+	select RADIO_ISA
+	help
+	  Choose Y here if you have one of these FM radio cards, and then fill
+	  in the port address below.
+
+	  Note: this driver hasn't been tested since a long time due to lack
+	  of hardware. If you have this hardware, then please contact the
+	  linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-zoltrix.
+
+config RADIO_ZOLTRIX_PORT
+	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
+	depends on RADIO_ZOLTRIX=y
+	default "20c"
+	help
+	  Enter the I/O port of your Zoltrix radio card.
+
+endif # V4L_RADIO_ISA_DRIVERS
+
+endif # RADIO_ADAPTERS
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
new file mode 100644
index 000000000..f54693ebd
--- /dev/null
+++ b/drivers/media/radio/Makefile
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the kernel character device drivers.
+#
+
+shark2-objs := radio-shark2.o radio-tea5777.o
+
+# Please keep it alphabetically sorted by Kconfig name
+# (e. g. LC_ALL=C sort Makefile)
+obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o
+obj-$(CONFIG_RADIO_CADET) += radio-cadet.o
+obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
+obj-$(CONFIG_RADIO_ISA) += radio-isa.o
+obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o
+obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o
+obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o
+obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
+obj-$(CONFIG_RADIO_SAA7706H) += saa7706h.o
+obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o
+obj-$(CONFIG_RADIO_SF16FMR2) += radio-sf16fmr2.o
+obj-$(CONFIG_RADIO_SHARK2) += shark2.o
+obj-$(CONFIG_RADIO_SHARK) += radio-shark.o
+obj-$(CONFIG_RADIO_SI470X) += si470x/
+obj-$(CONFIG_RADIO_SI4713) += si4713/
+obj-$(CONFIG_RADIO_SI476X) += radio-si476x.o
+obj-$(CONFIG_RADIO_TEA575X) += tea575x.o
+obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
+obj-$(CONFIG_RADIO_TEF6862) += tef6862.o
+obj-$(CONFIG_RADIO_TERRATEC) += radio-terratec.o
+obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o
+obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
+obj-$(CONFIG_RADIO_TYPHOON) += radio-typhoon.o
+obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
+
+obj-$(CONFIG_USB_DSBR) += dsbr100.o
+obj-$(CONFIG_USB_KEENE) += radio-keene.o
+obj-$(CONFIG_USB_MA901) += radio-ma901.o
+obj-$(CONFIG_USB_MR800) += radio-mr800.o
+obj-$(CONFIG_USB_RAREMONO) += radio-raremono.o
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
new file mode 100644
index 000000000..b8e0835a1
--- /dev/null
+++ b/drivers/media/radio/dsbr100.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* A driver for the D-Link DSB-R100 USB radio and Gemtek USB Radio 21.
+ * The device plugs into both the USB and an analog audio input, so this thing
+ * only deals with initialisation and frequency setting, the
+ * audio data has to be handled by a sound driver.
+ *
+ * Major issue: I can't find out where the device reports the signal
+ * strength, and indeed the windows software appearantly just looks
+ * at the stereo indicator as well.  So, scanning will only find
+ * stereo stations.  Sad, but I can't help it.
+ *
+ * Also, the windows program sends oodles of messages over to the
+ * device, and I couldn't figure out their meaning.  My suspicion
+ * is that they don't have any:-)
+ *
+ * You might find some interesting stuff about this module at
+ * http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr
+ *
+ * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
+ *
+ * Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/videodev2.h>
+#include <linux/usb.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+
+/*
+ * Version Information
+ */
+MODULE_AUTHOR("Markus Demleitner <msdemlei@tucana.harvard.edu>");
+MODULE_DESCRIPTION("D-Link DSB-R100 USB FM radio driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.1.0");
+
+#define DSB100_VENDOR 0x04b4
+#define DSB100_PRODUCT 0x1002
+
+/* Commands the device appears to understand */
+#define DSB100_TUNE 1
+#define DSB100_ONOFF 2
+
+#define TB_LEN 16
+
+/* Frequency limits in MHz -- these are European values.  For Japanese
+devices, that would be 76 and 91.  */
+#define FREQ_MIN  87.5
+#define FREQ_MAX 108.0
+#define FREQ_MUL 16000
+
+#define v4l2_dev_to_radio(d) container_of(d, struct dsbr100_device, v4l2_dev)
+
+static int radio_nr = -1;
+module_param(radio_nr, int, 0);
+
+/* Data for one (physical) device */
+struct dsbr100_device {
+	struct usb_device *usbdev;
+	struct video_device videodev;
+	struct v4l2_device v4l2_dev;
+	struct v4l2_ctrl_handler hdl;
+
+	u8 *transfer_buffer;
+	struct mutex v4l2_lock;
+	int curfreq;
+	bool stereo;
+	bool muted;
+};
+
+/* Low-level device interface begins here */
+
+/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
+static int dsbr100_setfreq(struct dsbr100_device *radio, unsigned freq)
+{
+	unsigned f = (freq / 16 * 80) / 1000 + 856;
+	int retval = 0;
+
+	if (!radio->muted) {
+		retval = usb_control_msg(radio->usbdev,
+				usb_rcvctrlpipe(radio->usbdev, 0),
+				DSB100_TUNE,
+				USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+				(f >> 8) & 0x00ff, f & 0xff,
+				radio->transfer_buffer, 8, 300);
+		if (retval >= 0)
+			mdelay(1);
+	}
+
+	if (retval >= 0) {
+		radio->curfreq = freq;
+		return 0;
+	}
+	dev_err(&radio->usbdev->dev,
+		"%s - usb_control_msg returned %i, request %i\n",
+			__func__, retval, DSB100_TUNE);
+	return retval;
+}
+
+/* switch on radio */
+static int dsbr100_start(struct dsbr100_device *radio)
+{
+	int retval = usb_control_msg(radio->usbdev,
+		usb_rcvctrlpipe(radio->usbdev, 0),
+		DSB100_ONOFF,
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+		0x01, 0x00, radio->transfer_buffer, 8, 300);
+
+	if (retval >= 0)
+		return dsbr100_setfreq(radio, radio->curfreq);
+	dev_err(&radio->usbdev->dev,
+		"%s - usb_control_msg returned %i, request %i\n",
+			__func__, retval, DSB100_ONOFF);
+	return retval;
+
+}
+
+/* switch off radio */
+static int dsbr100_stop(struct dsbr100_device *radio)
+{
+	int retval = usb_control_msg(radio->usbdev,
+		usb_rcvctrlpipe(radio->usbdev, 0),
+		DSB100_ONOFF,
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+		0x00, 0x00, radio->transfer_buffer, 8, 300);
+
+	if (retval >= 0)
+		return 0;
+	dev_err(&radio->usbdev->dev,
+		"%s - usb_control_msg returned %i, request %i\n",
+			__func__, retval, DSB100_ONOFF);
+	return retval;
+
+}
+
+/* return the device status.  This is, in effect, just whether it
+sees a stereo signal or not.  Pity. */
+static void dsbr100_getstat(struct dsbr100_device *radio)
+{
+	int retval = usb_control_msg(radio->usbdev,
+		usb_rcvctrlpipe(radio->usbdev, 0),
+		USB_REQ_GET_STATUS,
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+		0x00, 0x24, radio->transfer_buffer, 8, 300);
+
+	if (retval < 0) {
+		radio->stereo = false;
+		dev_err(&radio->usbdev->dev,
+			"%s - usb_control_msg returned %i, request %i\n",
+				__func__, retval, USB_REQ_GET_STATUS);
+	} else {
+		radio->stereo = !(radio->transfer_buffer[0] & 0x01);
+	}
+}
+
+static int vidioc_querycap(struct file *file, void *priv,
+					struct v4l2_capability *v)
+{
+	struct dsbr100_device *radio = video_drvdata(file);
+
+	strscpy(v->driver, "dsbr100", sizeof(v->driver));
+	strscpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card));
+	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	struct dsbr100_device *radio = video_drvdata(file);
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	dsbr100_getstat(radio);
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->rangelow = FREQ_MIN * FREQ_MUL;
+	v->rangehigh = FREQ_MAX * FREQ_MUL;
+	v->rxsubchans = radio->stereo ? V4L2_TUNER_SUB_STEREO :
+		V4L2_TUNER_SUB_MONO;
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+	v->audmode = V4L2_TUNER_MODE_STEREO;
+	v->signal = radio->stereo ? 0xffff : 0;     /* We can't get the signal strength */
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *v)
+{
+	return v->index ? -EINVAL : 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct dsbr100_device *radio = video_drvdata(file);
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	return dsbr100_setfreq(radio, clamp_t(unsigned, f->frequency,
+			FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL));
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct dsbr100_device *radio = video_drvdata(file);
+
+	if (f->tuner)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = radio->curfreq;
+	return 0;
+}
+
+static int usb_dsbr100_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct dsbr100_device *radio =
+		container_of(ctrl->handler, struct dsbr100_device, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		radio->muted = ctrl->val;
+		return radio->muted ? dsbr100_stop(radio) : dsbr100_start(radio);
+	}
+	return -EINVAL;
+}
+
+
+/* USB subsystem interface begins here */
+
+/*
+ * Handle unplugging of the device.
+ * We call video_unregister_device in any case.
+ * The last function called in this procedure is
+ * usb_dsbr100_video_device_release
+ */
+static void usb_dsbr100_disconnect(struct usb_interface *intf)
+{
+	struct dsbr100_device *radio = usb_get_intfdata(intf);
+
+	mutex_lock(&radio->v4l2_lock);
+	/*
+	 * Disconnect is also called on unload, and in that case we need to
+	 * mute the device. This call will silently fail if it is called
+	 * after a physical disconnect.
+	 */
+	usb_control_msg(radio->usbdev,
+		usb_rcvctrlpipe(radio->usbdev, 0),
+		DSB100_ONOFF,
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+		0x00, 0x00, radio->transfer_buffer, 8, 300);
+	usb_set_intfdata(intf, NULL);
+	video_unregister_device(&radio->videodev);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	mutex_unlock(&radio->v4l2_lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+
+/* Suspend device - stop device. */
+static int usb_dsbr100_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct dsbr100_device *radio = usb_get_intfdata(intf);
+
+	mutex_lock(&radio->v4l2_lock);
+	if (!radio->muted && dsbr100_stop(radio) < 0)
+		dev_warn(&intf->dev, "dsbr100_stop failed\n");
+	mutex_unlock(&radio->v4l2_lock);
+
+	dev_info(&intf->dev, "going into suspend..\n");
+	return 0;
+}
+
+/* Resume device - start device. */
+static int usb_dsbr100_resume(struct usb_interface *intf)
+{
+	struct dsbr100_device *radio = usb_get_intfdata(intf);
+
+	mutex_lock(&radio->v4l2_lock);
+	if (!radio->muted && dsbr100_start(radio) < 0)
+		dev_warn(&intf->dev, "dsbr100_start failed\n");
+	mutex_unlock(&radio->v4l2_lock);
+
+	dev_info(&intf->dev, "coming out of suspend..\n");
+	return 0;
+}
+
+/* free data structures */
+static void usb_dsbr100_release(struct v4l2_device *v4l2_dev)
+{
+	struct dsbr100_device *radio = v4l2_dev_to_radio(v4l2_dev);
+
+	v4l2_ctrl_handler_free(&radio->hdl);
+	v4l2_device_unregister(&radio->v4l2_dev);
+	kfree(radio->transfer_buffer);
+	kfree(radio);
+}
+
+static const struct v4l2_ctrl_ops usb_dsbr100_ctrl_ops = {
+	.s_ctrl = usb_dsbr100_s_ctrl,
+};
+
+/* File system interface */
+static const struct v4l2_file_operations usb_dsbr100_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= video_ioctl2,
+	.open           = v4l2_fh_open,
+	.release        = v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+};
+
+static const struct v4l2_ioctl_ops usb_dsbr100_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/* check if the device is present and register with v4l and usb if it is */
+static int usb_dsbr100_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct dsbr100_device *radio;
+	struct v4l2_device *v4l2_dev;
+	int retval;
+
+	radio = kzalloc_obj(struct dsbr100_device);
+
+	if (!radio)
+		return -ENOMEM;
+
+	radio->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL);
+
+	if (!(radio->transfer_buffer)) {
+		kfree(radio);
+		return -ENOMEM;
+	}
+
+	v4l2_dev = &radio->v4l2_dev;
+	v4l2_dev->release = usb_dsbr100_release;
+
+	retval = v4l2_device_register(&intf->dev, v4l2_dev);
+	if (retval < 0) {
+		v4l2_err(v4l2_dev, "couldn't register v4l2_device\n");
+		goto err_reg_dev;
+	}
+
+	v4l2_ctrl_handler_init(&radio->hdl, 1);
+	v4l2_ctrl_new_std(&radio->hdl, &usb_dsbr100_ctrl_ops,
+			  V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	if (radio->hdl.error) {
+		retval = radio->hdl.error;
+		v4l2_err(v4l2_dev, "couldn't register control\n");
+		goto err_reg_ctrl;
+	}
+	mutex_init(&radio->v4l2_lock);
+	strscpy(radio->videodev.name, v4l2_dev->name,
+		sizeof(radio->videodev.name));
+	radio->videodev.v4l2_dev = v4l2_dev;
+	radio->videodev.fops = &usb_dsbr100_fops;
+	radio->videodev.ioctl_ops = &usb_dsbr100_ioctl_ops;
+	radio->videodev.release = video_device_release_empty;
+	radio->videodev.lock = &radio->v4l2_lock;
+	radio->videodev.ctrl_handler = &radio->hdl;
+	radio->videodev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER;
+
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->curfreq = FREQ_MIN * FREQ_MUL;
+	radio->muted = true;
+
+	video_set_drvdata(&radio->videodev, radio);
+	usb_set_intfdata(intf, radio);
+
+	retval = video_register_device(&radio->videodev, VFL_TYPE_RADIO, radio_nr);
+	if (retval == 0)
+		return 0;
+	v4l2_err(v4l2_dev, "couldn't register video device\n");
+
+err_reg_ctrl:
+	v4l2_ctrl_handler_free(&radio->hdl);
+	v4l2_device_unregister(v4l2_dev);
+err_reg_dev:
+	kfree(radio->transfer_buffer);
+	kfree(radio);
+	return retval;
+}
+
+static const struct usb_device_id usb_dsbr100_device_table[] = {
+	{ USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_dsbr100_device_table);
+
+/* USB subsystem interface */
+static struct usb_driver usb_dsbr100_driver = {
+	.name			= "dsbr100",
+	.probe			= usb_dsbr100_probe,
+	.disconnect		= usb_dsbr100_disconnect,
+	.id_table		= usb_dsbr100_device_table,
+	.suspend		= usb_dsbr100_suspend,
+	.resume			= usb_dsbr100_resume,
+	.reset_resume		= usb_dsbr100_resume,
+};
+
+module_usb_driver(usb_dsbr100_driver);
diff --git a/drivers/media/radio/lm7000.h b/drivers/media/radio/lm7000.h
new file mode 100644
index 000000000..adb217965
--- /dev/null
+++ b/drivers/media/radio/lm7000.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LM7000_H
+#define __LM7000_H
+
+/* Sanyo LM7000 tuner chip control
+ *
+ * Copyright 2012 Ondrej Zary <linux@rainbow-software.org>
+ * based on radio-aimslab.c by M. Kirkwood
+ * and radio-sf16fmi.c by M. Kirkwood and Petr Vandrovec
+ */
+
+#define LM7000_DATA	(1 << 0)
+#define LM7000_CLK	(1 << 1)
+#define LM7000_CE	(1 << 2)
+
+#define LM7000_FM_100	(0 << 20)
+#define LM7000_FM_50	(1 << 20)
+#define LM7000_FM_25	(2 << 20)
+#define LM7000_BIT_FM	(1 << 23)
+
+static inline void lm7000_set_freq(u32 freq, void *handle,
+				void (*set_pins)(void *handle, u8 pins))
+{
+	int i;
+	u8 data;
+	u32 val;
+
+	freq += 171200;		/* Add 10.7 MHz IF */
+	freq /= 400;		/* Convert to 25 kHz units */
+	val = freq | LM7000_FM_25 | LM7000_BIT_FM;
+	/* write the 24-bit register, starting with LSB */
+	for (i = 0; i < 24; i++) {
+		data = val & (1 << i) ? LM7000_DATA : 0;
+		set_pins(handle, data | LM7000_CE);
+		udelay(2);
+		set_pins(handle, data | LM7000_CE | LM7000_CLK);
+		udelay(2);
+		set_pins(handle, data | LM7000_CE);
+		udelay(2);
+	}
+	set_pins(handle, 0);
+}
+
+#endif /* __LM7000_H */
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
new file mode 100644
index 000000000..1395f76b0
--- /dev/null
+++ b/drivers/media/radio/radio-aimslab.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AimsLab RadioTrack (aka RadioVeveal) driver
+ *
+ * Copyright 1997 M. Kirkwood
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hverkuil@kernel.org>
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
+ * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
+ *
+ * Notes on the hardware (reverse engineered from other peoples'
+ * reverse engineering of AIMS' code :-)
+ *
+ *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
+ *
+ *  The signal strength query is unsurprisingly inaccurate.  And it seems
+ *  to indicate that (on my card, at least) the frequency setting isn't
+ *  too great.  (I have to tune up .025MHz from what the freq should be
+ *  to get a report that the thing is tuned.)
+ *
+ *  Volume control is (ugh) analogue:
+ *   out(port, start_increasing_volume);
+ *   wait(a_wee_while);
+ *   out(port, stop_changing_the_volume);
+ *
+ * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
+ */
+
+#include <linux/module.h>	/* Modules			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/delay.h>	/* msleep			*/
+#include <linux/videodev2.h>	/* kernel radio structs		*/
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include "radio-isa.h"
+#include "lm7000.h"
+
+MODULE_AUTHOR("M. Kirkwood");
+MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
+
+#ifndef CONFIG_RADIO_RTRACK_PORT
+#define CONFIG_RADIO_RTRACK_PORT -1
+#endif
+
+#define RTRACK_MAX 2
+
+static int io[RTRACK_MAX] = { [0] = CONFIG_RADIO_RTRACK_PORT,
+			      [1 ... (RTRACK_MAX - 1)] = -1 };
+static int radio_nr[RTRACK_MAX]	= { [0 ... (RTRACK_MAX - 1)] = -1 };
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)");
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+struct rtrack {
+	struct radio_isa_card isa;
+	int curvol;
+};
+
+static struct radio_isa_card *rtrack_alloc(void)
+{
+	struct rtrack *rt = kzalloc_obj(struct rtrack);
+
+	if (rt)
+		rt->curvol = 0xff;
+	return rt ? &rt->isa : NULL;
+}
+
+#define AIMS_BIT_TUN_CE		(1 << 0)
+#define AIMS_BIT_TUN_CLK	(1 << 1)
+#define AIMS_BIT_TUN_DATA	(1 << 2)
+#define AIMS_BIT_VOL_CE		(1 << 3)
+#define AIMS_BIT_TUN_STRQ	(1 << 4)
+/* bit 5 is not connected */
+#define AIMS_BIT_VOL_UP		(1 << 6)	/* active low */
+#define AIMS_BIT_VOL_DN		(1 << 7)	/* active low */
+
+static void rtrack_set_pins(void *handle, u8 pins)
+{
+	struct radio_isa_card *isa = handle;
+	struct rtrack *rt = container_of(isa, struct rtrack, isa);
+	u8 bits = AIMS_BIT_VOL_DN | AIMS_BIT_VOL_UP | AIMS_BIT_TUN_STRQ;
+
+	if (!v4l2_ctrl_g_ctrl(rt->isa.mute))
+		bits |= AIMS_BIT_VOL_CE;
+
+	if (pins & LM7000_DATA)
+		bits |= AIMS_BIT_TUN_DATA;
+	if (pins & LM7000_CLK)
+		bits |= AIMS_BIT_TUN_CLK;
+	if (pins & LM7000_CE)
+		bits |= AIMS_BIT_TUN_CE;
+
+	outb_p(bits, rt->isa.io);
+}
+
+static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	lm7000_set_freq(freq, isa, rtrack_set_pins);
+
+	return 0;
+}
+
+static u32 rtrack_g_signal(struct radio_isa_card *isa)
+{
+	/* bit set = no signal present */
+	return 0xffff * !(inb(isa->io) & 2);
+}
+
+static int rtrack_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	struct rtrack *rt = container_of(isa, struct rtrack, isa);
+	int curvol = rt->curvol;
+
+	if (mute) {
+		outb(0xd0, isa->io);	/* volume steady + sigstr + off	*/
+		return 0;
+	}
+	if (vol == 0) {			/* volume = 0 means mute the card */
+		outb(0x48, isa->io);	/* volume down but still "on"	*/
+		msleep(curvol * 3);	/* make sure it's totally down	*/
+	} else if (curvol < vol) {
+		outb(0x98, isa->io);	/* volume up + sigstr + on	*/
+		for (; curvol < vol; curvol++)
+			mdelay(3);
+	} else if (curvol > vol) {
+		outb(0x58, isa->io);	/* volume down + sigstr + on	*/
+		for (; curvol > vol; curvol--)
+			mdelay(3);
+	}
+	outb(0xd8, isa->io);		/* volume steady + sigstr + on	*/
+	rt->curvol = vol;
+	return 0;
+}
+
+/* Mute card - prevents noisy bootups */
+static int rtrack_initialize(struct radio_isa_card *isa)
+{
+	/* this ensures that the volume is all the way up  */
+	outb(0x90, isa->io);	/* volume up but still "on"	*/
+	msleep(3000);		/* make sure it's totally up	*/
+	outb(0xc0, isa->io);	/* steady volume, mute card	*/
+	return 0;
+}
+
+static const struct radio_isa_ops rtrack_ops = {
+	.alloc = rtrack_alloc,
+	.init = rtrack_initialize,
+	.s_mute_volume = rtrack_s_mute_volume,
+	.s_frequency = rtrack_s_frequency,
+	.g_signal = rtrack_g_signal,
+};
+
+static const int rtrack_ioports[] = { 0x20f, 0x30f };
+
+static struct radio_isa_driver rtrack_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-aimslab",
+		},
+	},
+	.io_params = io,
+	.radio_nr_params = radio_nr,
+	.io_ports = rtrack_ioports,
+	.num_of_io_ports = ARRAY_SIZE(rtrack_ioports),
+	.region_size = 2,
+	.card = "AIMSlab RadioTrack/RadioReveal",
+	.ops = &rtrack_ops,
+	.has_stereo = true,
+	.max_volume = 0xff,
+};
+
+static int __init rtrack_init(void)
+{
+	return isa_register_driver(&rtrack_driver.driver, RTRACK_MAX);
+}
+
+static void __exit rtrack_exit(void)
+{
+	isa_unregister_driver(&rtrack_driver.driver);
+}
+
+module_init(rtrack_init);
+module_exit(rtrack_exit);
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
new file mode 100644
index 000000000..175ef2b0c
--- /dev/null
+++ b/drivers/media/radio/radio-aztech.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * radio-aztech.c - Aztech radio card driver
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hverkuil@kernel.org>
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
+ * Adapted to support the Video for Linux API by
+ * Russell Kroll <rkroll@exploits.org>.  Based on original tuner code by:
+ *
+ * Quay Ly
+ * Donald Song
+ * Jason Lewis      (jlewis@twilight.vtc.vsc.edu)
+ * Scott McGrath    (smcgrath@twilight.vtc.vsc.edu)
+ * William McGrath  (wmcgrath@twilight.vtc.vsc.edu)
+ *
+ * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
+*/
+
+#include <linux/module.h>	/* Modules			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/delay.h>	/* udelay			*/
+#include <linux/videodev2.h>	/* kernel radio structs		*/
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include "radio-isa.h"
+#include "lm7000.h"
+
+MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
+MODULE_DESCRIPTION("A driver for the Aztech radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
+
+/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
+#ifndef CONFIG_RADIO_AZTECH_PORT
+#define CONFIG_RADIO_AZTECH_PORT -1
+#endif
+
+#define AZTECH_MAX 2
+
+static int io[AZTECH_MAX] = { [0] = CONFIG_RADIO_AZTECH_PORT,
+			      [1 ... (AZTECH_MAX - 1)] = -1 };
+static int radio_nr[AZTECH_MAX]	= { [0 ... (AZTECH_MAX - 1)] = -1 };
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "I/O addresses of the Aztech card (0x350 or 0x358)");
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+struct aztech {
+	struct radio_isa_card isa;
+	int curvol;
+};
+
+/* bit definitions for register read */
+#define AZTECH_BIT_NOT_TUNED	(1 << 0)
+#define AZTECH_BIT_MONO		(1 << 1)
+/* bit definitions for register write */
+#define AZTECH_BIT_TUN_CE	(1 << 1)
+#define AZTECH_BIT_TUN_CLK	(1 << 6)
+#define AZTECH_BIT_TUN_DATA	(1 << 7)
+/* bits 0 and 2 are volume control, bits 3..5 are not connected */
+
+static void aztech_set_pins(void *handle, u8 pins)
+{
+	struct radio_isa_card *isa = handle;
+	struct aztech *az = container_of(isa, struct aztech, isa);
+	u8 bits = az->curvol;
+
+	if (pins & LM7000_DATA)
+		bits |= AZTECH_BIT_TUN_DATA;
+	if (pins & LM7000_CLK)
+		bits |= AZTECH_BIT_TUN_CLK;
+	if (pins & LM7000_CE)
+		bits |= AZTECH_BIT_TUN_CE;
+
+	outb_p(bits, az->isa.io);
+}
+
+static struct radio_isa_card *aztech_alloc(void)
+{
+	struct aztech *az = kzalloc_obj(*az);
+
+	return az ? &az->isa : NULL;
+}
+
+static int aztech_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	lm7000_set_freq(freq, isa, aztech_set_pins);
+
+	return 0;
+}
+
+static u32 aztech_g_rxsubchans(struct radio_isa_card *isa)
+{
+	if (inb(isa->io) & AZTECH_BIT_MONO)
+		return V4L2_TUNER_SUB_MONO;
+	return V4L2_TUNER_SUB_STEREO;
+}
+
+static u32 aztech_g_signal(struct radio_isa_card *isa)
+{
+	return (inb(isa->io) & AZTECH_BIT_NOT_TUNED) ? 0 : 0xffff;
+}
+
+static int aztech_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	struct aztech *az = container_of(isa, struct aztech, isa);
+
+	if (mute)
+		vol = 0;
+	az->curvol = (vol & 1) + ((vol & 2) << 1);
+	outb(az->curvol, isa->io);
+	return 0;
+}
+
+static const struct radio_isa_ops aztech_ops = {
+	.alloc = aztech_alloc,
+	.s_mute_volume = aztech_s_mute_volume,
+	.s_frequency = aztech_s_frequency,
+	.g_rxsubchans = aztech_g_rxsubchans,
+	.g_signal = aztech_g_signal,
+};
+
+static const int aztech_ioports[] = { 0x350, 0x358 };
+
+static struct radio_isa_driver aztech_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-aztech",
+		},
+	},
+	.io_params = io,
+	.radio_nr_params = radio_nr,
+	.io_ports = aztech_ioports,
+	.num_of_io_ports = ARRAY_SIZE(aztech_ioports),
+	.region_size = 8,
+	.card = "Aztech Radio",
+	.ops = &aztech_ops,
+	.has_stereo = true,
+	.max_volume = 3,
+};
+
+static int __init aztech_init(void)
+{
+	return isa_register_driver(&aztech_driver.driver, AZTECH_MAX);
+}
+
+static void __exit aztech_exit(void)
+{
+	isa_unregister_driver(&aztech_driver.driver);
+}
+
+module_init(aztech_init);
+module_exit(aztech_exit);
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
new file mode 100644
index 000000000..53c1d1061
--- /dev/null
+++ b/drivers/media/radio/radio-cadet.c
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* radio-cadet.c - A video4linux driver for the ADS Cadet AM/FM Radio Card
+ *
+ * by Fred Gleason <fredg@wava.com>
+ * Version 0.3.3
+ *
+ * (Loosely) based on code for the Aztech radio card by
+ *
+ * Russell Kroll    (rkroll@exploits.org)
+ * Quay Ly
+ * Donald Song
+ * Jason Lewis      (jlewis@twilight.vtc.vsc.edu)
+ * Scott McGrath    (smcgrath@twilight.vtc.vsc.edu)
+ * William McGrath  (wmcgrath@twilight.vtc.vsc.edu)
+ *
+ * History:
+ * 2000-04-29	Russell Kroll <rkroll@exploits.org>
+ *		Added ISAPnP detection for Linux 2.3/2.4
+ *
+ * 2001-01-10	Russell Kroll <rkroll@exploits.org>
+ *		Removed dead CONFIG_RADIO_CADET_PORT code
+ *		PnP detection on load is now default (no args necessary)
+ *
+ * 2002-01-17	Adam Belay <ambx1@neo.rr.com>
+ *		Updated to latest pnp code
+ *
+ * 2003-01-31	Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *		Cleaned up locking, delay code, general odds and ends
+ *
+ * 2006-07-30	Hans J. Koch <koch@hjk-az.de>
+ *		Changed API to V4L2
+ */
+
+#include <linux/module.h>	/* Modules			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/delay.h>	/* udelay			*/
+#include <linux/videodev2.h>	/* V4L2 API defs		*/
+#include <linux/param.h>
+#include <linux/pnp.h>
+#include <linux/sched.h>
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+
+MODULE_AUTHOR("Fred Gleason, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
+MODULE_DESCRIPTION("A driver for the ADS Cadet AM/FM/RDS radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.3.4");
+
+static int io = -1;		/* default to isapnp activation */
+static int radio_nr = -1;
+
+module_param(io, int, 0);
+MODULE_PARM_DESC(io, "I/O address of Cadet card (0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e)");
+module_param(radio_nr, int, 0);
+
+#define RDS_BUFFER 256
+#define RDS_RX_FLAG 1
+#define MBS_RX_FLAG 2
+
+struct cadet {
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct v4l2_ctrl_handler ctrl_handler;
+	int io;
+	bool is_fm_band;
+	u32 curfreq;
+	int tunestat;
+	int sigstrength;
+	wait_queue_head_t read_queue;
+	struct timer_list readtimer;
+	u8 rdsin, rdsout, rdsstat;
+	unsigned char rdsbuf[RDS_BUFFER];
+	struct mutex lock;
+	int reading;
+};
+
+static struct cadet cadet_card;
+
+/*
+ * Signal Strength Threshold Values
+ * The V4L API spec does not define any particular unit for the signal
+ * strength value.  These values are in microvolts of RF at the tuner's input.
+ */
+static u16 sigtable[2][4] = {
+	{ 1835, 2621,  4128, 65535 },
+	{ 2185, 4369, 13107, 65535 },
+};
+
+static const struct v4l2_frequency_band bands[] = {
+	{
+		.index = 0,
+		.type = V4L2_TUNER_RADIO,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow = 8320,      /* 520 kHz */
+		.rangehigh = 26400,    /* 1650 kHz */
+		.modulation = V4L2_BAND_MODULATION_AM,
+	}, {
+		.index = 1,
+		.type = V4L2_TUNER_RADIO,
+		.capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS |
+			V4L2_TUNER_CAP_RDS_BLOCK_IO | V4L2_TUNER_CAP_LOW |
+			V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow = 1400000,   /* 87.5 MHz */
+		.rangehigh = 1728000,  /* 108.0 MHz */
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+};
+
+
+static int cadet_getstereo(struct cadet *dev)
+{
+	int ret = V4L2_TUNER_SUB_MONO;
+
+	if (!dev->is_fm_band)	/* Only FM has stereo capability! */
+		return V4L2_TUNER_SUB_MONO;
+
+	outb(7, dev->io);          /* Select tuner control */
+	if ((inb(dev->io + 1) & 0x40) == 0)
+		ret = V4L2_TUNER_SUB_STEREO;
+	return ret;
+}
+
+static unsigned cadet_gettune(struct cadet *dev)
+{
+	int curvol, i;
+	unsigned fifo = 0;
+
+	/*
+	 * Prepare for read
+	 */
+
+	outb(7, dev->io);       /* Select tuner control */
+	curvol = inb(dev->io + 1); /* Save current volume/mute setting */
+	outb(0x00, dev->io + 1);  /* Ensure WRITE-ENABLE is LOW */
+	dev->tunestat = 0xffff;
+
+	/*
+	 * Read the shift register
+	 */
+	for (i = 0; i < 25; i++) {
+		fifo = (fifo << 1) | ((inb(dev->io + 1) >> 7) & 0x01);
+		if (i < 24) {
+			outb(0x01, dev->io + 1);
+			dev->tunestat &= inb(dev->io + 1);
+			outb(0x00, dev->io + 1);
+		}
+	}
+
+	/*
+	 * Restore volume/mute setting
+	 */
+	outb(curvol, dev->io + 1);
+	return fifo;
+}
+
+static unsigned cadet_getfreq(struct cadet *dev)
+{
+	int i;
+	unsigned freq = 0, test, fifo = 0;
+
+	/*
+	 * Read current tuning
+	 */
+	fifo = cadet_gettune(dev);
+
+	/*
+	 * Convert to actual frequency
+	 */
+	if (!dev->is_fm_band)    /* AM */
+		return ((fifo & 0x7fff) - 450) * 16;
+
+	test = 12500;
+	for (i = 0; i < 14; i++) {
+		if ((fifo & 0x01) != 0)
+			freq += test;
+		test = test << 1;
+		fifo = fifo >> 1;
+	}
+	freq -= 10700000;           /* IF frequency is 10.7 MHz */
+	freq = (freq * 16) / 1000;   /* Make it 1/16 kHz */
+	return freq;
+}
+
+static void cadet_settune(struct cadet *dev, unsigned fifo)
+{
+	int i;
+	unsigned test;
+
+	outb(7, dev->io);                /* Select tuner control */
+	/*
+	 * Write the shift register
+	 */
+	test = 0;
+	test = (fifo >> 23) & 0x02;      /* Align data for SDO */
+	test |= 0x1c;                /* SDM=1, SWE=1, SEN=1, SCK=0 */
+	outb(7, dev->io);                /* Select tuner control */
+	outb(test, dev->io + 1);           /* Initialize for write */
+	for (i = 0; i < 25; i++) {
+		test |= 0x01;              /* Toggle SCK High */
+		outb(test, dev->io + 1);
+		test &= 0xfe;              /* Toggle SCK Low */
+		outb(test, dev->io + 1);
+		fifo = fifo << 1;            /* Prepare the next bit */
+		test = 0x1c | ((fifo >> 23) & 0x02);
+		outb(test, dev->io + 1);
+	}
+}
+
+static void cadet_setfreq(struct cadet *dev, unsigned freq)
+{
+	unsigned fifo;
+	int i, j, test;
+	int curvol;
+
+	freq = clamp(freq, bands[dev->is_fm_band].rangelow,
+			   bands[dev->is_fm_band].rangehigh);
+	dev->curfreq = freq;
+	/*
+	 * Formulate a fifo command
+	 */
+	fifo = 0;
+	if (dev->is_fm_band) {    /* FM */
+		test = 102400;
+		freq = freq / 16;       /* Make it kHz */
+		freq += 10700;               /* IF is 10700 kHz */
+		for (i = 0; i < 14; i++) {
+			fifo = fifo << 1;
+			if (freq >= test) {
+				fifo |= 0x01;
+				freq -= test;
+			}
+			test = test >> 1;
+		}
+	} else {	/* AM */
+		fifo = (freq / 16) + 450;	/* Make it kHz */
+		fifo |= 0x100000;		/* Select AM Band */
+	}
+
+	/*
+	 * Save current volume/mute setting
+	 */
+
+	outb(7, dev->io);                /* Select tuner control */
+	curvol = inb(dev->io + 1);
+
+	/*
+	 * Tune the card
+	 */
+	for (j = 3; j > -1; j--) {
+		cadet_settune(dev, fifo | (j << 16));
+
+		outb(7, dev->io);         /* Select tuner control */
+		outb(curvol, dev->io + 1);
+
+		msleep(100);
+
+		cadet_gettune(dev);
+		if ((dev->tunestat & 0x40) == 0) {   /* Tuned */
+			dev->sigstrength = sigtable[dev->is_fm_band][j];
+			goto reset_rds;
+		}
+	}
+	dev->sigstrength = 0;
+reset_rds:
+	outb(3, dev->io);
+	outb(inb(dev->io + 1) & 0x7f, dev->io + 1);
+}
+
+static bool cadet_has_rds_data(struct cadet *dev)
+{
+	bool result;
+
+	mutex_lock(&dev->lock);
+	result = dev->rdsin != dev->rdsout;
+	mutex_unlock(&dev->lock);
+	return result;
+}
+
+
+static void cadet_handler(struct timer_list *t)
+{
+	struct cadet *dev = timer_container_of(dev, t, readtimer);
+
+	/* Service the RDS fifo */
+	if (mutex_trylock(&dev->lock)) {
+		outb(0x3, dev->io);       /* Select RDS Decoder Control */
+		if ((inb(dev->io + 1) & 0x20) != 0)
+			pr_err("cadet: RDS fifo overflow\n");
+		outb(0x80, dev->io);      /* Select RDS fifo */
+
+		while ((inb(dev->io) & 0x80) != 0) {
+			dev->rdsbuf[dev->rdsin] = inb(dev->io + 1);
+			if (dev->rdsin + 1 != dev->rdsout)
+				dev->rdsin++;
+		}
+		mutex_unlock(&dev->lock);
+	}
+
+	/*
+	 * Service pending read
+	 */
+	if (cadet_has_rds_data(dev))
+		wake_up_interruptible(&dev->read_queue);
+
+	/*
+	 * Clean up and exit
+	 */
+	dev->readtimer.expires = jiffies + msecs_to_jiffies(50);
+	add_timer(&dev->readtimer);
+}
+
+static void cadet_start_rds(struct cadet *dev)
+{
+	dev->rdsstat = 1;
+	outb(0x80, dev->io);        /* Select RDS fifo */
+	timer_setup(&dev->readtimer, cadet_handler, 0);
+	dev->readtimer.expires = jiffies + msecs_to_jiffies(50);
+	add_timer(&dev->readtimer);
+}
+
+static ssize_t cadet_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+	struct cadet *dev = video_drvdata(file);
+	unsigned char readbuf[RDS_BUFFER];
+	int i = 0;
+
+	mutex_lock(&dev->lock);
+	if (dev->rdsstat == 0)
+		cadet_start_rds(dev);
+	mutex_unlock(&dev->lock);
+
+	if (!cadet_has_rds_data(dev) && (file->f_flags & O_NONBLOCK))
+		return -EWOULDBLOCK;
+	i = wait_event_interruptible(dev->read_queue, cadet_has_rds_data(dev));
+	if (i)
+		return i;
+
+	mutex_lock(&dev->lock);
+	while (i < count && dev->rdsin != dev->rdsout)
+		readbuf[i++] = dev->rdsbuf[dev->rdsout++];
+	mutex_unlock(&dev->lock);
+
+	if (i && copy_to_user(data, readbuf, i))
+		return -EFAULT;
+	return i;
+}
+
+
+static int vidioc_querycap(struct file *file, void *priv,
+				struct v4l2_capability *v)
+{
+	strscpy(v->driver, "ADS Cadet", sizeof(v->driver));
+	strscpy(v->card, "ADS Cadet", sizeof(v->card));
+	strscpy(v->bus_info, "ISA:radio-cadet", sizeof(v->bus_info));
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	struct cadet *dev = video_drvdata(file);
+
+	if (v->index)
+		return -EINVAL;
+	v->type = V4L2_TUNER_RADIO;
+	strscpy(v->name, "Radio", sizeof(v->name));
+	v->capability = bands[0].capability | bands[1].capability;
+	v->rangelow = bands[0].rangelow;	   /* 520 kHz (start of AM band) */
+	v->rangehigh = bands[1].rangehigh;    /* 108.0 MHz (end of FM band) */
+	if (dev->is_fm_band) {
+		v->rxsubchans = cadet_getstereo(dev);
+		outb(3, dev->io);
+		outb(inb(dev->io + 1) & 0x7f, dev->io + 1);
+		mdelay(100);
+		outb(3, dev->io);
+		if (inb(dev->io + 1) & 0x80)
+			v->rxsubchans |= V4L2_TUNER_SUB_RDS;
+	} else {
+		v->rangelow = 8320;      /* 520 kHz */
+		v->rangehigh = 26400;    /* 1650 kHz */
+		v->rxsubchans = V4L2_TUNER_SUB_MONO;
+	}
+	v->audmode = V4L2_TUNER_MODE_STEREO;
+	v->signal = dev->sigstrength; /* We might need to modify scaling of this */
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *v)
+{
+	return v->index ? -EINVAL : 0;
+}
+
+static int vidioc_enum_freq_bands(struct file *file, void *priv,
+				struct v4l2_frequency_band *band)
+{
+	if (band->tuner)
+		return -EINVAL;
+	if (band->index >= ARRAY_SIZE(bands))
+		return -EINVAL;
+	*band = bands[band->index];
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct cadet *dev = video_drvdata(file);
+
+	if (f->tuner)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = dev->curfreq;
+	return 0;
+}
+
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct cadet *dev = video_drvdata(file);
+
+	if (f->tuner)
+		return -EINVAL;
+	dev->is_fm_band =
+		f->frequency >= (bands[0].rangehigh + bands[1].rangelow) / 2;
+	cadet_setfreq(dev, f->frequency);
+	return 0;
+}
+
+static int cadet_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct cadet *dev = container_of(ctrl->handler, struct cadet, ctrl_handler);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		outb(7, dev->io);                /* Select tuner control */
+		if (ctrl->val)
+			outb(0x00, dev->io + 1);
+		else
+			outb(0x20, dev->io + 1);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int cadet_open(struct file *file)
+{
+	struct cadet *dev = video_drvdata(file);
+	int err;
+
+	mutex_lock(&dev->lock);
+	err = v4l2_fh_open(file);
+	if (err)
+		goto fail;
+	if (v4l2_fh_is_singular_file(file))
+		init_waitqueue_head(&dev->read_queue);
+fail:
+	mutex_unlock(&dev->lock);
+	return err;
+}
+
+static int cadet_release(struct file *file)
+{
+	struct cadet *dev = video_drvdata(file);
+
+	mutex_lock(&dev->lock);
+	if (v4l2_fh_is_singular_file(file) && dev->rdsstat) {
+		timer_delete_sync(&dev->readtimer);
+		dev->rdsstat = 0;
+	}
+	v4l2_fh_release(file);
+	mutex_unlock(&dev->lock);
+	return 0;
+}
+
+static __poll_t cadet_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct cadet *dev = video_drvdata(file);
+	__poll_t req_events = poll_requested_events(wait);
+	__poll_t res = v4l2_ctrl_poll(file, wait);
+
+	poll_wait(file, &dev->read_queue, wait);
+	if (dev->rdsstat == 0 && (req_events & (EPOLLIN | EPOLLRDNORM))) {
+		mutex_lock(&dev->lock);
+		if (dev->rdsstat == 0)
+			cadet_start_rds(dev);
+		mutex_unlock(&dev->lock);
+	}
+	if (cadet_has_rds_data(dev))
+		res |= EPOLLIN | EPOLLRDNORM;
+	return res;
+}
+
+
+static const struct v4l2_file_operations cadet_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cadet_open,
+	.release	= cadet_release,
+	.read		= cadet_read,
+	.unlocked_ioctl	= video_ioctl2,
+	.poll		= cadet_poll,
+};
+
+static const struct v4l2_ioctl_ops cadet_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_enum_freq_bands = vidioc_enum_freq_bands,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct v4l2_ctrl_ops cadet_ctrl_ops = {
+	.s_ctrl = cadet_s_ctrl,
+};
+
+#ifdef CONFIG_PNP
+
+static const struct pnp_device_id cadet_pnp_devices[] = {
+	/* ADS Cadet AM/FM Radio Card */
+	{ .id = "MSM0c24" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pnp, cadet_pnp_devices);
+
+static int cadet_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
+{
+	if (!dev)
+		return -ENODEV;
+	/* only support one device */
+	if (io > 0)
+		return -EBUSY;
+
+	if (!pnp_port_valid(dev, 0))
+		return -ENODEV;
+
+	io = pnp_port_start(dev, 0);
+
+	printk(KERN_INFO "radio-cadet: PnP reports device at %#x\n", io);
+
+	return io;
+}
+
+static struct pnp_driver cadet_pnp_driver = {
+	.name		= "radio-cadet",
+	.id_table	= cadet_pnp_devices,
+	.probe		= cadet_pnp_probe,
+	.remove		= NULL,
+};
+
+#else
+static struct pnp_driver cadet_pnp_driver;
+#endif
+
+static void cadet_probe(struct cadet *dev)
+{
+	static int iovals[8] = { 0x330, 0x332, 0x334, 0x336, 0x338, 0x33a, 0x33c, 0x33e };
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		dev->io = iovals[i];
+		if (request_region(dev->io, 2, "cadet-probe")) {
+			cadet_setfreq(dev, bands[1].rangelow);
+			if (cadet_getfreq(dev) == bands[1].rangelow) {
+				release_region(dev->io, 2);
+				return;
+			}
+			release_region(dev->io, 2);
+		}
+	}
+	dev->io = -1;
+}
+
+/*
+ * io should only be set if the user has used something like
+ * isapnp (the userspace program) to initialize this card for us
+ */
+
+static int __init cadet_init(void)
+{
+	struct cadet *dev = &cadet_card;
+	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
+	struct v4l2_ctrl_handler *hdl;
+	int res = -ENODEV;
+
+	strscpy(v4l2_dev->name, "cadet", sizeof(v4l2_dev->name));
+	mutex_init(&dev->lock);
+
+	/* If a probe was requested then probe ISAPnP first (safest) */
+	if (io < 0)
+		pnp_register_driver(&cadet_pnp_driver);
+	dev->io = io;
+
+	/* If that fails then probe unsafely if probe is requested */
+	if (dev->io < 0)
+		cadet_probe(dev);
+
+	/* Else we bail out */
+	if (dev->io < 0) {
+#ifdef MODULE
+		v4l2_err(v4l2_dev, "you must set an I/O address with io=0x330, 0x332, 0x334,\n");
+		v4l2_err(v4l2_dev, "0x336, 0x338, 0x33a, 0x33c or 0x33e\n");
+#endif
+		goto fail;
+	}
+	if (!request_region(dev->io, 2, "cadet"))
+		goto fail;
+
+	res = v4l2_device_register(NULL, v4l2_dev);
+	if (res < 0) {
+		release_region(dev->io, 2);
+		v4l2_err(v4l2_dev, "could not register v4l2_device\n");
+		goto fail;
+	}
+
+	hdl = &dev->ctrl_handler;
+	v4l2_ctrl_handler_init(hdl, 2);
+	v4l2_ctrl_new_std(hdl, &cadet_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	v4l2_dev->ctrl_handler = hdl;
+	if (hdl->error) {
+		res = hdl->error;
+		v4l2_err(v4l2_dev, "Could not register controls\n");
+		goto err_hdl;
+	}
+
+	dev->is_fm_band = true;
+	dev->curfreq = bands[dev->is_fm_band].rangelow;
+	cadet_setfreq(dev, dev->curfreq);
+	strscpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name));
+	dev->vdev.v4l2_dev = v4l2_dev;
+	dev->vdev.fops = &cadet_fops;
+	dev->vdev.ioctl_ops = &cadet_ioctl_ops;
+	dev->vdev.release = video_device_release_empty;
+	dev->vdev.lock = &dev->lock;
+	dev->vdev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO |
+				V4L2_CAP_READWRITE | V4L2_CAP_RDS_CAPTURE;
+	video_set_drvdata(&dev->vdev, dev);
+
+	res = video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr);
+	if (res < 0)
+		goto err_hdl;
+	v4l2_info(v4l2_dev, "ADS Cadet Radio Card at 0x%x\n", dev->io);
+	return 0;
+err_hdl:
+	v4l2_ctrl_handler_free(hdl);
+	v4l2_device_unregister(v4l2_dev);
+	release_region(dev->io, 2);
+fail:
+	pnp_unregister_driver(&cadet_pnp_driver);
+	return res;
+}
+
+static void __exit cadet_exit(void)
+{
+	struct cadet *dev = &cadet_card;
+
+	video_unregister_device(&dev->vdev);
+	v4l2_ctrl_handler_free(&dev->ctrl_handler);
+	v4l2_device_unregister(&dev->v4l2_dev);
+	outb(7, dev->io);	/* Mute */
+	outb(0x00, dev->io + 1);
+	release_region(dev->io, 2);
+	pnp_unregister_driver(&cadet_pnp_driver);
+}
+
+module_init(cadet_init);
+module_exit(cadet_exit);
+
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
new file mode 100644
index 000000000..7e4257e4b
--- /dev/null
+++ b/drivers/media/radio/radio-gemtek.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GemTek radio card driver
+ *
+ * Copyright 1998 Jonas Munsin <jmunsin@iki.fi>
+ *
+ * GemTek hasn't released any specs on the card, so the protocol had to
+ * be reverse engineered with dosemu.
+ *
+ * Besides the protocol changes, this is mostly a copy of:
+ *
+ *    RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
+ *
+ *    Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
+ *    Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *    Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hverkuil@kernel.org>
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
+ *
+ * Note: this card seems to swap the left and right audio channels!
+ *
+ * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
+ */
+
+#include <linux/module.h>	/* Modules			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/delay.h>	/* udelay			*/
+#include <linux/videodev2.h>	/* kernel radio structs		*/
+#include <linux/mutex.h>
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <linux/pnp.h>
+#include <linux/slab.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include "radio-isa.h"
+
+/*
+ * Module info.
+ */
+
+MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
+MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
+
+/*
+ * Module params.
+ */
+
+#ifndef CONFIG_RADIO_GEMTEK_PORT
+#define CONFIG_RADIO_GEMTEK_PORT -1
+#endif
+#ifndef CONFIG_RADIO_GEMTEK_PROBE
+#define CONFIG_RADIO_GEMTEK_PROBE 1
+#endif
+
+#define GEMTEK_MAX 4
+
+static bool probe = CONFIG_RADIO_GEMTEK_PROBE;
+static bool hardmute;
+static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT,
+			      [1 ... (GEMTEK_MAX - 1)] = -1 };
+static int radio_nr[GEMTEK_MAX]	= { [0 ... (GEMTEK_MAX - 1)] = -1 };
+
+module_param(probe, bool, 0444);
+MODULE_PARM_DESC(probe, "Enable automatic device probing.");
+
+module_param(hardmute, bool, 0644);
+MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise.");
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard).");
+
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+/*
+ * Frequency calculation constants.  Intermediate frequency 10.52 MHz (nominal
+ * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
+ */
+#define FSCALE		8
+#define IF_OFFSET	((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
+#define REF_FREQ	((unsigned int)(6.39 * 16 * (1<<FSCALE)))
+
+#define GEMTEK_CK		0x01	/* Clock signal			*/
+#define GEMTEK_DA		0x02	/* Serial data			*/
+#define GEMTEK_CE		0x04	/* Chip enable			*/
+#define GEMTEK_NS		0x08	/* No signal			*/
+#define GEMTEK_MT		0x10	/* Line mute			*/
+#define GEMTEK_STDF_3_125_KHZ	0x01	/* Standard frequency 3.125 kHz	*/
+#define GEMTEK_PLL_OFF		0x07	/* PLL off			*/
+
+#define BU2614_BUS_SIZE	32	/* BU2614 / BU2614FS bus size		*/
+
+#define SHORT_DELAY 5		/* usec */
+#define LONG_DELAY 75		/* usec */
+
+struct gemtek {
+	struct radio_isa_card isa;
+	bool muted;
+	u32 bu2614data;
+};
+
+#define BU2614_FREQ_BITS	16 /* D0..D15, Frequency data		*/
+#define BU2614_PORT_BITS	3 /* P0..P2, Output port control data	*/
+#define BU2614_VOID_BITS	4 /* unused				*/
+#define BU2614_FMES_BITS	1 /* CT, Frequency measurement beginning data */
+#define BU2614_STDF_BITS	3 /* R0..R2, Standard frequency data	*/
+#define BU2614_SWIN_BITS	1 /* S, Switch between FMIN / AMIN	*/
+#define BU2614_SWAL_BITS        1 /* PS, Swallow counter division (AMIN only)*/
+#define BU2614_VOID2_BITS	1 /* unused				*/
+#define BU2614_FMUN_BITS	1 /* GT, Frequency measurement time & unlock */
+#define BU2614_TEST_BITS	1 /* TS, Test data is input		*/
+
+#define BU2614_FREQ_SHIFT	0
+#define BU2614_PORT_SHIFT	(BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
+#define BU2614_VOID_SHIFT	(BU2614_PORT_BITS + BU2614_PORT_SHIFT)
+#define BU2614_FMES_SHIFT	(BU2614_VOID_BITS + BU2614_VOID_SHIFT)
+#define BU2614_STDF_SHIFT	(BU2614_FMES_BITS + BU2614_FMES_SHIFT)
+#define BU2614_SWIN_SHIFT	(BU2614_STDF_BITS + BU2614_STDF_SHIFT)
+#define BU2614_SWAL_SHIFT	(BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
+#define BU2614_VOID2_SHIFT	(BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
+#define BU2614_FMUN_SHIFT	(BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
+#define BU2614_TEST_SHIFT	(BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
+
+#define MKMASK(field)	(((1UL<<BU2614_##field##_BITS) - 1) << \
+			BU2614_##field##_SHIFT)
+#define BU2614_PORT_MASK	MKMASK(PORT)
+#define BU2614_FREQ_MASK	MKMASK(FREQ)
+#define BU2614_VOID_MASK	MKMASK(VOID)
+#define BU2614_FMES_MASK	MKMASK(FMES)
+#define BU2614_STDF_MASK	MKMASK(STDF)
+#define BU2614_SWIN_MASK	MKMASK(SWIN)
+#define BU2614_SWAL_MASK	MKMASK(SWAL)
+#define BU2614_VOID2_MASK	MKMASK(VOID2)
+#define BU2614_FMUN_MASK	MKMASK(FMUN)
+#define BU2614_TEST_MASK	MKMASK(TEST)
+
+/*
+ * Set data which will be sent to BU2614FS.
+ */
+#define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
+	((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
+
+/*
+ * Transmit settings to BU2614FS over GemTek IC.
+ */
+static void gemtek_bu2614_transmit(struct gemtek *gt)
+{
+	struct radio_isa_card *isa = &gt->isa;
+	int i, bit, q, mute;
+
+	mute = gt->muted ? GEMTEK_MT : 0x00;
+
+	outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io);
+	udelay(LONG_DELAY);
+
+	for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) {
+		bit = (q & 1) ? GEMTEK_DA : 0;
+		outb_p(mute | GEMTEK_CE | bit, isa->io);
+		udelay(SHORT_DELAY);
+		outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io);
+		udelay(SHORT_DELAY);
+	}
+
+	outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io);
+	udelay(SHORT_DELAY);
+}
+
+/*
+ * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
+ */
+static unsigned long gemtek_convfreq(unsigned long freq)
+{
+	return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ;
+}
+
+static struct radio_isa_card *gemtek_alloc(void)
+{
+	struct gemtek *gt = kzalloc_obj(*gt);
+
+	if (gt)
+		gt->muted = true;
+	return gt ? &gt->isa : NULL;
+}
+
+/*
+ * Set FM-frequency.
+ */
+static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	struct gemtek *gt = container_of(isa, struct gemtek, isa);
+
+	if (hardmute && gt->muted)
+		return 0;
+
+	gemtek_bu2614_set(gt, BU2614_PORT, 0);
+	gemtek_bu2614_set(gt, BU2614_FMES, 0);
+	gemtek_bu2614_set(gt, BU2614_SWIN, 0);	/* FM-mode	*/
+	gemtek_bu2614_set(gt, BU2614_SWAL, 0);
+	gemtek_bu2614_set(gt, BU2614_FMUN, 1);	/* GT bit set	*/
+	gemtek_bu2614_set(gt, BU2614_TEST, 0);
+	gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
+	gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq));
+	gemtek_bu2614_transmit(gt);
+	return 0;
+}
+
+/*
+ * Set mute flag.
+ */
+static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	struct gemtek *gt = container_of(isa, struct gemtek, isa);
+	int i;
+
+	gt->muted = mute;
+	if (hardmute) {
+		if (!mute)
+			return gemtek_s_frequency(isa, isa->freq);
+
+		/* Turn off PLL, disable data output */
+		gemtek_bu2614_set(gt, BU2614_PORT, 0);
+		gemtek_bu2614_set(gt, BU2614_FMES, 0);	/* CT bit off	*/
+		gemtek_bu2614_set(gt, BU2614_SWIN, 0);	/* FM-mode	*/
+		gemtek_bu2614_set(gt, BU2614_SWAL, 0);
+		gemtek_bu2614_set(gt, BU2614_FMUN, 0);	/* GT bit off	*/
+		gemtek_bu2614_set(gt, BU2614_TEST, 0);
+		gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF);
+		gemtek_bu2614_set(gt, BU2614_FREQ, 0);
+		gemtek_bu2614_transmit(gt);
+		return 0;
+	}
+
+	/* Read bus contents (CE, CK and DA). */
+	i = inb_p(isa->io);
+	/* Write it back with mute flag set. */
+	outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io);
+	udelay(SHORT_DELAY);
+	return 0;
+}
+
+static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa)
+{
+	if (inb_p(isa->io) & GEMTEK_NS)
+		return V4L2_TUNER_SUB_MONO;
+	return V4L2_TUNER_SUB_STEREO;
+}
+
+/*
+ * Check if requested card acts like GemTek Radio card.
+ */
+static bool gemtek_probe(struct radio_isa_card *isa, int io)
+{
+	int i, q;
+
+	q = inb_p(io);	/* Read bus contents before probing. */
+	/* Try to turn on CE, CK and DA respectively and check if card responds
+	   properly. */
+	for (i = 0; i < 3; ++i) {
+		outb_p(1 << i, io);
+		udelay(SHORT_DELAY);
+
+		if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5))))
+			return false;
+	}
+	outb_p(q >> 5, io);	/* Write bus contents back. */
+	udelay(SHORT_DELAY);
+	return true;
+}
+
+static const struct radio_isa_ops gemtek_ops = {
+	.alloc = gemtek_alloc,
+	.probe = gemtek_probe,
+	.s_mute_volume = gemtek_s_mute_volume,
+	.s_frequency = gemtek_s_frequency,
+	.g_rxsubchans = gemtek_g_rxsubchans,
+};
+
+static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
+
+#ifdef CONFIG_PNP
+static const struct pnp_device_id gemtek_pnp_devices[] = {
+	/* AOpen FX-3D/Pro Radio */
+	{ .id = "ADS7183" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices);
+#endif
+
+static struct radio_isa_driver gemtek_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-gemtek",
+		},
+	},
+#ifdef CONFIG_PNP
+	.pnp_driver = {
+		.name		= "radio-gemtek",
+		.id_table	= gemtek_pnp_devices,
+		.probe		= radio_isa_pnp_probe,
+		.remove		= radio_isa_pnp_remove,
+	},
+#endif
+	.io_params = io,
+	.radio_nr_params = radio_nr,
+	.io_ports = gemtek_ioports,
+	.num_of_io_ports = ARRAY_SIZE(gemtek_ioports),
+	.region_size = 1,
+	.card = "GemTek Radio",
+	.ops = &gemtek_ops,
+	.has_stereo = true,
+};
+
+static int __init gemtek_init(void)
+{
+	gemtek_driver.probe = probe;
+#ifdef CONFIG_PNP
+	pnp_register_driver(&gemtek_driver.pnp_driver);
+#endif
+	return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX);
+}
+
+static void __exit gemtek_exit(void)
+{
+	hardmute = true;	/* Turn off PLL */
+#ifdef CONFIG_PNP
+	pnp_unregister_driver(&gemtek_driver.pnp_driver);
+#endif
+	isa_unregister_driver(&gemtek_driver.driver);
+}
+
+module_init(gemtek_init);
+module_exit(gemtek_exit);
diff --git a/drivers/media/radio/radio-isa.c b/drivers/media/radio/radio-isa.c
new file mode 100644
index 000000000..1a144536f
--- /dev/null
+++ b/drivers/media/radio/radio-isa.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Framework for ISA radio drivers.
+ * This takes care of all the V4L2 scaffolding, allowing the ISA drivers
+ * to concentrate on the actual hardware operation.
+ *
+ * Copyright (C) 2012 Hans Verkuil <hverkuil@kernel.org>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+
+#include "radio-isa.h"
+
+MODULE_AUTHOR("Hans Verkuil");
+MODULE_DESCRIPTION("A framework for ISA radio drivers.");
+MODULE_LICENSE("GPL");
+
+#define FREQ_LOW  (87U * 16000U)
+#define FREQ_HIGH (108U * 16000U)
+
+static int radio_isa_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *v)
+{
+	struct radio_isa_card *isa = video_drvdata(file);
+
+	strscpy(v->driver, isa->drv->driver.driver.name, sizeof(v->driver));
+	strscpy(v->card, isa->drv->card, sizeof(v->card));
+	snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", dev_name(isa->v4l2_dev.dev));
+	return 0;
+}
+
+static int radio_isa_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	struct radio_isa_card *isa = video_drvdata(file);
+	const struct radio_isa_ops *ops = isa->drv->ops;
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->rangelow = FREQ_LOW;
+	v->rangehigh = FREQ_HIGH;
+	v->capability = V4L2_TUNER_CAP_LOW;
+	if (isa->drv->has_stereo)
+		v->capability |= V4L2_TUNER_CAP_STEREO;
+
+	if (ops->g_rxsubchans)
+		v->rxsubchans = ops->g_rxsubchans(isa);
+	else
+		v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
+	v->audmode = isa->stereo ? V4L2_TUNER_MODE_STEREO : V4L2_TUNER_MODE_MONO;
+	if (ops->g_signal)
+		v->signal = ops->g_signal(isa);
+	else
+		v->signal = (v->rxsubchans & V4L2_TUNER_SUB_STEREO) ?
+								0xffff : 0;
+	return 0;
+}
+
+static int radio_isa_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *v)
+{
+	struct radio_isa_card *isa = video_drvdata(file);
+	const struct radio_isa_ops *ops = isa->drv->ops;
+
+	if (v->index)
+		return -EINVAL;
+	if (ops->s_stereo) {
+		isa->stereo = (v->audmode == V4L2_TUNER_MODE_STEREO);
+		return ops->s_stereo(isa, isa->stereo);
+	}
+	return 0;
+}
+
+static int radio_isa_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct radio_isa_card *isa = video_drvdata(file);
+	u32 freq = f->frequency;
+	int res;
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+	freq = clamp(freq, FREQ_LOW, FREQ_HIGH);
+	res = isa->drv->ops->s_frequency(isa, freq);
+	if (res == 0)
+		isa->freq = freq;
+	return res;
+}
+
+static int radio_isa_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct radio_isa_card *isa = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = isa->freq;
+	return 0;
+}
+
+static int radio_isa_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct radio_isa_card *isa =
+		container_of(ctrl->handler, struct radio_isa_card, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		return isa->drv->ops->s_mute_volume(isa, ctrl->val,
+				isa->volume ? isa->volume->val : 0);
+	}
+	return -EINVAL;
+}
+
+static int radio_isa_log_status(struct file *file, void *priv)
+{
+	struct radio_isa_card *isa = video_drvdata(file);
+
+	v4l2_info(&isa->v4l2_dev, "I/O Port = 0x%03x\n", isa->io);
+	v4l2_ctrl_handler_log_status(&isa->hdl, isa->v4l2_dev.name);
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops radio_isa_ctrl_ops = {
+	.s_ctrl = radio_isa_s_ctrl,
+};
+
+static const struct v4l2_file_operations radio_isa_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops radio_isa_ioctl_ops = {
+	.vidioc_querycap    = radio_isa_querycap,
+	.vidioc_g_tuner     = radio_isa_g_tuner,
+	.vidioc_s_tuner     = radio_isa_s_tuner,
+	.vidioc_g_frequency = radio_isa_g_frequency,
+	.vidioc_s_frequency = radio_isa_s_frequency,
+	.vidioc_log_status  = radio_isa_log_status,
+	.vidioc_subscribe_event   = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+int radio_isa_match(struct device *pdev, unsigned int dev)
+{
+	struct radio_isa_driver *drv = pdev->platform_data;
+
+	return drv->probe || drv->io_params[dev] >= 0;
+}
+EXPORT_SYMBOL_GPL(radio_isa_match);
+
+static bool radio_isa_valid_io(const struct radio_isa_driver *drv, int io)
+{
+	int i;
+
+	for (i = 0; i < drv->num_of_io_ports; i++)
+		if (drv->io_ports[i] == io)
+			return true;
+	return false;
+}
+
+static struct radio_isa_card *radio_isa_alloc(struct radio_isa_driver *drv,
+				struct device *pdev)
+{
+	struct v4l2_device *v4l2_dev;
+	struct radio_isa_card *isa = drv->ops->alloc();
+	if (!isa)
+		return NULL;
+
+	dev_set_drvdata(pdev, isa);
+	isa->drv = drv;
+	v4l2_dev = &isa->v4l2_dev;
+	strscpy(v4l2_dev->name, dev_name(pdev), sizeof(v4l2_dev->name));
+
+	return isa;
+}
+
+static int radio_isa_common_probe(struct radio_isa_card *isa,
+				  struct device *pdev,
+				  int radio_nr, unsigned region_size)
+{
+	const struct radio_isa_driver *drv = isa->drv;
+	const struct radio_isa_ops *ops = drv->ops;
+	struct v4l2_device *v4l2_dev = &isa->v4l2_dev;
+	int res;
+
+	if (!request_region(isa->io, region_size, v4l2_dev->name)) {
+		v4l2_err(v4l2_dev, "port 0x%x already in use\n", isa->io);
+		kfree(isa);
+		return -EBUSY;
+	}
+
+	res = v4l2_device_register(pdev, v4l2_dev);
+	if (res < 0) {
+		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		goto err_dev_reg;
+	}
+
+	v4l2_ctrl_handler_init(&isa->hdl, 1);
+	isa->mute = v4l2_ctrl_new_std(&isa->hdl, &radio_isa_ctrl_ops,
+				V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	if (drv->max_volume)
+		isa->volume = v4l2_ctrl_new_std(&isa->hdl, &radio_isa_ctrl_ops,
+			V4L2_CID_AUDIO_VOLUME, 0, drv->max_volume, 1,
+			drv->max_volume);
+	v4l2_dev->ctrl_handler = &isa->hdl;
+	if (isa->hdl.error) {
+		res = isa->hdl.error;
+		v4l2_err(v4l2_dev, "Could not register controls\n");
+		goto err_hdl;
+	}
+	if (drv->max_volume)
+		v4l2_ctrl_cluster(2, &isa->mute);
+	v4l2_dev->ctrl_handler = &isa->hdl;
+
+	mutex_init(&isa->lock);
+	isa->vdev.lock = &isa->lock;
+	strscpy(isa->vdev.name, v4l2_dev->name, sizeof(isa->vdev.name));
+	isa->vdev.v4l2_dev = v4l2_dev;
+	isa->vdev.fops = &radio_isa_fops;
+	isa->vdev.ioctl_ops = &radio_isa_ioctl_ops;
+	isa->vdev.release = video_device_release_empty;
+	isa->vdev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	video_set_drvdata(&isa->vdev, isa);
+	isa->freq = FREQ_LOW;
+	isa->stereo = drv->has_stereo;
+
+	if (ops->init)
+		res = ops->init(isa);
+	if (!res)
+		res = v4l2_ctrl_handler_setup(&isa->hdl);
+	if (!res)
+		res = ops->s_frequency(isa, isa->freq);
+	if (!res && ops->s_stereo)
+		res = ops->s_stereo(isa, isa->stereo);
+	if (res < 0) {
+		v4l2_err(v4l2_dev, "Could not setup card\n");
+		goto err_hdl;
+	}
+	res = video_register_device(&isa->vdev, VFL_TYPE_RADIO, radio_nr);
+
+	if (res < 0) {
+		v4l2_err(v4l2_dev, "Could not register device node\n");
+		goto err_hdl;
+	}
+
+	v4l2_info(v4l2_dev, "Initialized radio card %s on port 0x%03x\n",
+			drv->card, isa->io);
+	return 0;
+
+err_hdl:
+	v4l2_ctrl_handler_free(&isa->hdl);
+err_dev_reg:
+	release_region(isa->io, region_size);
+	kfree(isa);
+	return res;
+}
+
+static void radio_isa_common_remove(struct radio_isa_card *isa,
+				    unsigned region_size)
+{
+	const struct radio_isa_ops *ops = isa->drv->ops;
+
+	ops->s_mute_volume(isa, true, isa->volume ? isa->volume->cur.val : 0);
+	video_unregister_device(&isa->vdev);
+	v4l2_ctrl_handler_free(&isa->hdl);
+	v4l2_device_unregister(&isa->v4l2_dev);
+	release_region(isa->io, region_size);
+	v4l2_info(&isa->v4l2_dev, "Removed radio card %s\n", isa->drv->card);
+	kfree(isa);
+}
+
+int radio_isa_probe(struct device *pdev, unsigned int dev)
+{
+	struct radio_isa_driver *drv = pdev->platform_data;
+	const struct radio_isa_ops *ops = drv->ops;
+	struct v4l2_device *v4l2_dev;
+	struct radio_isa_card *isa;
+
+	isa = radio_isa_alloc(drv, pdev);
+	if (!isa)
+		return -ENOMEM;
+	isa->io = drv->io_params[dev];
+	v4l2_dev = &isa->v4l2_dev;
+
+	if (drv->probe && ops->probe) {
+		int i;
+
+		for (i = 0; i < drv->num_of_io_ports; ++i) {
+			int io = drv->io_ports[i];
+
+			if (request_region(io, drv->region_size, v4l2_dev->name)) {
+				bool found = ops->probe(isa, io);
+
+				release_region(io, drv->region_size);
+				if (found) {
+					isa->io = io;
+					break;
+				}
+			}
+		}
+	}
+
+	if (!radio_isa_valid_io(drv, isa->io)) {
+		int i;
+
+		if (isa->io < 0)
+			return -ENODEV;
+		v4l2_err(v4l2_dev, "you must set an I/O address with io=0x%03x",
+				drv->io_ports[0]);
+		for (i = 1; i < drv->num_of_io_ports; i++)
+			printk(KERN_CONT "/0x%03x", drv->io_ports[i]);
+		printk(KERN_CONT ".\n");
+		kfree(isa);
+		return -EINVAL;
+	}
+
+	return radio_isa_common_probe(isa, pdev, drv->radio_nr_params[dev],
+					drv->region_size);
+}
+EXPORT_SYMBOL_GPL(radio_isa_probe);
+
+void radio_isa_remove(struct device *pdev, unsigned int dev)
+{
+	struct radio_isa_card *isa = dev_get_drvdata(pdev);
+
+	radio_isa_common_remove(isa, isa->drv->region_size);
+}
+EXPORT_SYMBOL_GPL(radio_isa_remove);
+
+#ifdef CONFIG_PNP
+int radio_isa_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
+{
+	struct pnp_driver *pnp_drv = to_pnp_driver(dev->dev.driver);
+	struct radio_isa_driver *drv = container_of(pnp_drv,
+					struct radio_isa_driver, pnp_driver);
+	struct radio_isa_card *isa;
+
+	if (!pnp_port_valid(dev, 0))
+		return -ENODEV;
+
+	isa = radio_isa_alloc(drv, &dev->dev);
+	if (!isa)
+		return -ENOMEM;
+
+	isa->io = pnp_port_start(dev, 0);
+
+	return radio_isa_common_probe(isa, &dev->dev, drv->radio_nr_params[0],
+					pnp_port_len(dev, 0));
+}
+EXPORT_SYMBOL_GPL(radio_isa_pnp_probe);
+
+void radio_isa_pnp_remove(struct pnp_dev *dev)
+{
+	struct radio_isa_card *isa = dev_get_drvdata(&dev->dev);
+
+	radio_isa_common_remove(isa, pnp_port_len(dev, 0));
+}
+EXPORT_SYMBOL_GPL(radio_isa_pnp_remove);
+#endif
diff --git a/drivers/media/radio/radio-isa.h b/drivers/media/radio/radio-isa.h
new file mode 100644
index 000000000..62ff5c3fb
--- /dev/null
+++ b/drivers/media/radio/radio-isa.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Framework for ISA radio drivers.
+ * This takes care of all the V4L2 scaffolding, allowing the ISA drivers
+ * to concentrate on the actual hardware operation.
+ *
+ * Copyright (C) 2012 Hans Verkuil <hverkuil@kernel.org>
+ */
+
+#ifndef _RADIO_ISA_H_
+#define _RADIO_ISA_H_
+
+#include <linux/isa.h>
+#include <linux/pnp.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+struct radio_isa_driver;
+struct radio_isa_ops;
+
+/* Core structure for radio ISA cards */
+struct radio_isa_card {
+	const struct radio_isa_driver *drv;
+	struct v4l2_device v4l2_dev;
+	struct v4l2_ctrl_handler hdl;
+	struct video_device vdev;
+	struct mutex lock;
+	const struct radio_isa_ops *ops;
+	struct {	/* mute/volume cluster */
+		struct v4l2_ctrl *mute;
+		struct v4l2_ctrl *volume;
+	};
+	/* I/O port */
+	int io;
+
+	/* Card is in stereo audio mode */
+	bool stereo;
+	/* Current frequency */
+	u32 freq;
+};
+
+struct radio_isa_ops {
+	/* Allocate and initialize a radio_isa_card struct */
+	struct radio_isa_card *(*alloc)(void);
+	/* Probe whether a card is present at the given port */
+	bool (*probe)(struct radio_isa_card *isa, int io);
+	/* Special card initialization can be done here, this is called after
+	 * the standard controls are registered, but before they are setup,
+	 * thus allowing drivers to add their own controls here. */
+	int (*init)(struct radio_isa_card *isa);
+	/* Set mute and volume. */
+	int (*s_mute_volume)(struct radio_isa_card *isa, bool mute, int volume);
+	/* Set frequency */
+	int (*s_frequency)(struct radio_isa_card *isa, u32 freq);
+	/* Set stereo/mono audio mode */
+	int (*s_stereo)(struct radio_isa_card *isa, bool stereo);
+	/* Get rxsubchans value for VIDIOC_G_TUNER */
+	u32 (*g_rxsubchans)(struct radio_isa_card *isa);
+	/* Get the signal strength for VIDIOC_G_TUNER */
+	u32 (*g_signal)(struct radio_isa_card *isa);
+};
+
+/* Top level structure needed to instantiate the cards */
+struct radio_isa_driver {
+	struct isa_driver driver;
+#ifdef CONFIG_PNP
+	struct pnp_driver pnp_driver;
+#endif
+	const struct radio_isa_ops *ops;
+	/* The module_param_array with the specified I/O ports */
+	int *io_params;
+	/* The module_param_array with the radio_nr values */
+	int *radio_nr_params;
+	/* Whether we should probe for possible cards */
+	bool probe;
+	/* The list of possible I/O ports */
+	const int *io_ports;
+	/* The size of that list */
+	int num_of_io_ports;
+	/* The region size to request */
+	unsigned region_size;
+	/* The name of the card */
+	const char *card;
+	/* Card can capture stereo audio */
+	bool has_stereo;
+	/* The maximum volume for the volume control. If 0, then there
+	   is no volume control possible. */
+	int max_volume;
+};
+
+int radio_isa_match(struct device *pdev, unsigned int dev);
+int radio_isa_probe(struct device *pdev, unsigned int dev);
+void radio_isa_remove(struct device *pdev, unsigned int dev);
+#ifdef CONFIG_PNP
+int radio_isa_pnp_probe(struct pnp_dev *dev,
+			const struct pnp_device_id *dev_id);
+void radio_isa_pnp_remove(struct pnp_dev *dev);
+#endif
+
+#endif
diff --git a/drivers/media/radio/radio-keene.c b/drivers/media/radio/radio-keene.c
new file mode 100644
index 000000000..8cfef3a77
--- /dev/null
+++ b/drivers/media/radio/radio-keene.c
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2012 Hans Verkuil <hverkuil@kernel.org>
+ */
+
+/* kernel includes */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+
+/* driver and module definitions */
+MODULE_AUTHOR("Hans Verkuil <hverkuil@kernel.org>");
+MODULE_DESCRIPTION("Keene FM Transmitter driver");
+MODULE_LICENSE("GPL");
+
+/* Actually, it advertises itself as a Logitech */
+#define USB_KEENE_VENDOR 0x046d
+#define USB_KEENE_PRODUCT 0x0a0e
+
+/* Probably USB_TIMEOUT should be modified in module parameter */
+#define BUFFER_LENGTH 8
+#define USB_TIMEOUT 500
+
+/* Frequency limits in MHz */
+#define FREQ_MIN  76U
+#define FREQ_MAX 108U
+#define FREQ_MUL 16000U
+
+/* USB Device ID List */
+static const struct usb_device_id usb_keene_device_table[] = {
+	{USB_DEVICE_AND_INTERFACE_INFO(USB_KEENE_VENDOR, USB_KEENE_PRODUCT,
+							USB_CLASS_HID, 0, 0) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_keene_device_table);
+
+struct keene_device {
+	struct usb_device *usbdev;
+	struct usb_interface *intf;
+	struct video_device vdev;
+	struct v4l2_device v4l2_dev;
+	struct v4l2_ctrl_handler hdl;
+	struct mutex lock;
+
+	u8 *buffer;
+	unsigned curfreq;
+	u8 tx;
+	u8 pa;
+	bool stereo;
+	bool muted;
+	bool preemph_75_us;
+};
+
+static inline struct keene_device *to_keene_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct keene_device, v4l2_dev);
+}
+
+/* Set frequency (if non-0), PA, mute and turn on/off the FM transmitter. */
+static int keene_cmd_main(struct keene_device *radio, unsigned freq, bool play)
+{
+	unsigned short freq_send = freq ? (freq - 76 * 16000) / 800 : 0;
+	int ret;
+
+	radio->buffer[0] = 0x00;
+	radio->buffer[1] = 0x50;
+	radio->buffer[2] = (freq_send >> 8) & 0xff;
+	radio->buffer[3] = freq_send & 0xff;
+	radio->buffer[4] = radio->pa;
+	/* If bit 4 is set, then tune to the frequency.
+	   If bit 3 is set, then unmute; if bit 2 is set, then mute.
+	   If bit 1 is set, then enter idle mode; if bit 0 is set,
+	   then enter transmit mode.
+	 */
+	radio->buffer[5] = (radio->muted ? 4 : 8) | (play ? 1 : 2) |
+							(freq ? 0x10 : 0);
+	radio->buffer[6] = 0x00;
+	radio->buffer[7] = 0x00;
+
+	ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+		9, 0x21, 0x200, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT);
+
+	if (ret < 0) {
+		dev_warn(&radio->vdev.dev, "%s failed (%d)\n", __func__, ret);
+		return ret;
+	}
+	if (freq)
+		radio->curfreq = freq;
+	return 0;
+}
+
+/* Set TX, stereo and preemphasis mode (50 us vs 75 us). */
+static int keene_cmd_set(struct keene_device *radio)
+{
+	int ret;
+
+	radio->buffer[0] = 0x00;
+	radio->buffer[1] = 0x51;
+	radio->buffer[2] = radio->tx;
+	/* If bit 0 is set, then transmit mono, otherwise stereo.
+	   If bit 2 is set, then enable 75 us preemphasis, otherwise
+	   it is 50 us. */
+	radio->buffer[3] = (radio->stereo ? 0 : 1) | (radio->preemph_75_us ? 4 : 0);
+	radio->buffer[4] = 0x00;
+	radio->buffer[5] = 0x00;
+	radio->buffer[6] = 0x00;
+	radio->buffer[7] = 0x00;
+
+	ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+		9, 0x21, 0x200, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT);
+
+	if (ret < 0) {
+		dev_warn(&radio->vdev.dev, "%s failed (%d)\n", __func__, ret);
+		return ret;
+	}
+	return 0;
+}
+
+/* Handle unplugging the device.
+ * We call video_unregister_device in any case.
+ * The last function called in this procedure is
+ * usb_keene_device_release.
+ */
+static void usb_keene_disconnect(struct usb_interface *intf)
+{
+	struct keene_device *radio = to_keene_dev(usb_get_intfdata(intf));
+
+	mutex_lock(&radio->lock);
+	usb_set_intfdata(intf, NULL);
+	video_unregister_device(&radio->vdev);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	mutex_unlock(&radio->lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+static int usb_keene_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct keene_device *radio = to_keene_dev(usb_get_intfdata(intf));
+
+	return keene_cmd_main(radio, 0, false);
+}
+
+static int usb_keene_resume(struct usb_interface *intf)
+{
+	struct keene_device *radio = to_keene_dev(usb_get_intfdata(intf));
+
+	mdelay(50);
+	keene_cmd_set(radio);
+	keene_cmd_main(radio, radio->curfreq, true);
+	return 0;
+}
+
+static int vidioc_querycap(struct file *file, void *priv,
+					struct v4l2_capability *v)
+{
+	struct keene_device *radio = video_drvdata(file);
+
+	strscpy(v->driver, "radio-keene", sizeof(v->driver));
+	strscpy(v->card, "Keene FM Transmitter", sizeof(v->card));
+	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
+	return 0;
+}
+
+static int vidioc_g_modulator(struct file *file, void *priv,
+				struct v4l2_modulator *v)
+{
+	struct keene_device *radio = video_drvdata(file);
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->rangelow = FREQ_MIN * FREQ_MUL;
+	v->rangehigh = FREQ_MAX * FREQ_MUL;
+	v->txsubchans = radio->stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+	return 0;
+}
+
+static int vidioc_s_modulator(struct file *file, void *priv,
+				const struct v4l2_modulator *v)
+{
+	struct keene_device *radio = video_drvdata(file);
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	radio->stereo = (v->txsubchans == V4L2_TUNER_SUB_STEREO);
+	return keene_cmd_set(radio);
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct keene_device *radio = video_drvdata(file);
+	unsigned freq = f->frequency;
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+	freq = clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);
+	return keene_cmd_main(radio, freq, true);
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct keene_device *radio = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = radio->curfreq;
+	return 0;
+}
+
+static int keene_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	static const u8 db2tx[] = {
+	     /*	 -15,  -12,   -9,   -6,   -3,    0 dB */
+		0x03, 0x13, 0x02, 0x12, 0x22, 0x32,
+	     /*	   3,    6,    9,   12,   15,   18 dB */
+		0x21, 0x31, 0x20, 0x30, 0x40, 0x50
+	};
+	struct keene_device *radio =
+		container_of(ctrl->handler, struct keene_device, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		radio->muted = ctrl->val;
+		return keene_cmd_main(radio, 0, true);
+
+	case V4L2_CID_TUNE_POWER_LEVEL:
+		/* To go from dBuV to the register value we apply the
+		   following formula: */
+		radio->pa = (ctrl->val - 71) * 100 / 62;
+		return keene_cmd_main(radio, 0, true);
+
+	case V4L2_CID_TUNE_PREEMPHASIS:
+		radio->preemph_75_us = ctrl->val == V4L2_PREEMPHASIS_75_uS;
+		return keene_cmd_set(radio);
+
+	case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+		radio->tx = db2tx[(ctrl->val - (s32)ctrl->minimum) / (s32)ctrl->step];
+		return keene_cmd_set(radio);
+	}
+	return -EINVAL;
+}
+
+/* File system interface */
+static const struct v4l2_file_operations usb_keene_fops = {
+	.owner		= THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ctrl_ops keene_ctrl_ops = {
+	.s_ctrl = keene_s_ctrl,
+};
+
+static const struct v4l2_ioctl_ops usb_keene_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_modulator = vidioc_g_modulator,
+	.vidioc_s_modulator = vidioc_s_modulator,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_log_status = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static void usb_keene_video_device_release(struct v4l2_device *v4l2_dev)
+{
+	struct keene_device *radio = to_keene_dev(v4l2_dev);
+
+	/* free rest memory */
+	v4l2_ctrl_handler_free(&radio->hdl);
+	kfree(radio->buffer);
+	kfree(radio);
+}
+
+/* check if the device is present and register with v4l and usb if it is */
+static int usb_keene_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct keene_device *radio;
+	struct v4l2_ctrl_handler *hdl;
+	int retval = 0;
+
+	/*
+	 * The Keene FM transmitter USB device has the same USB ID as
+	 * the Logitech AudioHub Speaker, but it should ignore the hid.
+	 * Check if the name is that of the Keene device.
+	 * If not, then someone connected the AudioHub and we shouldn't
+	 * attempt to handle this driver.
+	 * For reference: the product name of the AudioHub is
+	 * "AudioHub Speaker".
+	 */
+	if (dev->product && strcmp(dev->product, "B-LINK USB Audio  "))
+		return -ENODEV;
+
+	radio = kzalloc_obj(struct keene_device);
+	if (radio)
+		radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
+
+	if (!radio || !radio->buffer) {
+		dev_err(&intf->dev, "kmalloc for keene_device failed\n");
+		kfree(radio);
+		retval = -ENOMEM;
+		goto err;
+	}
+
+	hdl = &radio->hdl;
+	v4l2_ctrl_handler_init(hdl, 4);
+	v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_AUDIO_MUTE,
+			0, 1, 1, 0);
+	v4l2_ctrl_new_std_menu(hdl, &keene_ctrl_ops, V4L2_CID_TUNE_PREEMPHASIS,
+			V4L2_PREEMPHASIS_75_uS, 1, V4L2_PREEMPHASIS_50_uS);
+	v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_TUNE_POWER_LEVEL,
+			84, 118, 1, 118);
+	v4l2_ctrl_new_std(hdl, &keene_ctrl_ops, V4L2_CID_AUDIO_COMPRESSION_GAIN,
+			-15, 18, 3, 0);
+	radio->pa = 118;
+	radio->tx = 0x32;
+	radio->stereo = true;
+	if (hdl->error) {
+		retval = hdl->error;
+
+		goto err_v4l2;
+	}
+	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&intf->dev, "couldn't register v4l2_device\n");
+		goto err_v4l2;
+	}
+
+	mutex_init(&radio->lock);
+
+	radio->v4l2_dev.ctrl_handler = hdl;
+	radio->v4l2_dev.release = usb_keene_video_device_release;
+	strscpy(radio->vdev.name, radio->v4l2_dev.name,
+		sizeof(radio->vdev.name));
+	radio->vdev.v4l2_dev = &radio->v4l2_dev;
+	radio->vdev.fops = &usb_keene_fops;
+	radio->vdev.ioctl_ops = &usb_keene_ioctl_ops;
+	radio->vdev.lock = &radio->lock;
+	radio->vdev.release = video_device_release_empty;
+	radio->vdev.vfl_dir = VFL_DIR_TX;
+	radio->vdev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_MODULATOR;
+
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->intf = intf;
+	usb_set_intfdata(intf, &radio->v4l2_dev);
+
+	video_set_drvdata(&radio->vdev, radio);
+
+	/* at least 11ms is needed in order to settle hardware */
+	msleep(20);
+	keene_cmd_main(radio, 95.16 * FREQ_MUL, false);
+
+	retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1);
+	if (retval < 0) {
+		dev_err(&intf->dev, "could not register video device\n");
+		goto err_vdev;
+	}
+	v4l2_ctrl_handler_setup(hdl);
+	dev_info(&intf->dev, "V4L2 device registered as %s\n",
+			video_device_node_name(&radio->vdev));
+	return 0;
+
+err_vdev:
+	v4l2_device_unregister(&radio->v4l2_dev);
+err_v4l2:
+	v4l2_ctrl_handler_free(&radio->hdl);
+	kfree(radio->buffer);
+	kfree(radio);
+err:
+	return retval;
+}
+
+/* USB subsystem interface */
+static struct usb_driver usb_keene_driver = {
+	.name			= "radio-keene",
+	.probe			= usb_keene_probe,
+	.disconnect		= usb_keene_disconnect,
+	.id_table		= usb_keene_device_table,
+	.suspend		= usb_keene_suspend,
+	.resume			= usb_keene_resume,
+	.reset_resume		= usb_keene_resume,
+};
+
+module_usb_driver(usb_keene_driver);
+
diff --git a/drivers/media/radio/radio-ma901.c b/drivers/media/radio/radio-ma901.c
new file mode 100644
index 000000000..11c5d103c
--- /dev/null
+++ b/drivers/media/radio/radio-ma901.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for the MasterKit MA901 USB FM radio. This device plugs
+ * into the USB port and an analog audio input or headphones, so this thing
+ * only deals with initialization, frequency setting, volume.
+ *
+ * Copyright (c) 2012 Alexey Klimov <klimov.linux@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+
+#define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>"
+#define DRIVER_DESC "Masterkit MA901 USB FM radio driver"
+#define DRIVER_VERSION "0.0.1"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
+
+#define USB_MA901_VENDOR  0x16c0
+#define USB_MA901_PRODUCT 0x05df
+
+/* dev_warn macro with driver name */
+#define MA901_DRIVER_NAME "radio-ma901"
+#define ma901radio_dev_warn(dev, fmt, arg...)				\
+		dev_warn(dev, MA901_DRIVER_NAME " - " fmt, ##arg)
+
+#define ma901radio_dev_err(dev, fmt, arg...) \
+		dev_err(dev, MA901_DRIVER_NAME " - " fmt, ##arg)
+
+/* Probably USB_TIMEOUT should be modified in module parameter */
+#define BUFFER_LENGTH 8
+#define USB_TIMEOUT 500
+
+#define FREQ_MIN  87.5
+#define FREQ_MAX 108.0
+#define FREQ_MUL 16000
+
+#define MA901_VOLUME_MAX 16
+#define MA901_VOLUME_MIN 0
+
+/* Commands that device should understand
+ * List isn't full and will be updated with implementation of new functions
+ */
+#define MA901_RADIO_SET_FREQ		0x03
+#define MA901_RADIO_SET_VOLUME		0x04
+#define MA901_RADIO_SET_MONO_STEREO	0x05
+
+/* Comfortable defines for ma901radio_set_stereo */
+#define MA901_WANT_STEREO		0x50
+#define MA901_WANT_MONO			0xd0
+
+/* module parameter */
+static int radio_nr = -1;
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr, "Radio file number");
+
+/* Data for one (physical) device */
+struct ma901radio_device {
+	/* reference to USB and video device */
+	struct usb_device *usbdev;
+	struct usb_interface *intf;
+	struct video_device vdev;
+	struct v4l2_device v4l2_dev;
+	struct v4l2_ctrl_handler hdl;
+
+	u8 *buffer;
+	struct mutex lock;	/* buffer locking */
+	int curfreq;
+	u16 volume;
+	int stereo;
+	bool muted;
+};
+
+static inline struct ma901radio_device *to_ma901radio_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct ma901radio_device, v4l2_dev);
+}
+
+/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
+static int ma901radio_set_freq(struct ma901radio_device *radio, int freq)
+{
+	unsigned int freq_send = 0x300 + (freq >> 5) / 25;
+	int retval;
+
+	radio->buffer[0] = 0x0a;
+	radio->buffer[1] = MA901_RADIO_SET_FREQ;
+	radio->buffer[2] = ((freq_send >> 8) & 0xff) + 0x80;
+	radio->buffer[3] = freq_send & 0xff;
+	radio->buffer[4] = 0x00;
+	radio->buffer[5] = 0x00;
+	radio->buffer[6] = 0x00;
+	radio->buffer[7] = 0x00;
+
+	retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+				9, 0x21, 0x0300, 0,
+				radio->buffer, BUFFER_LENGTH, USB_TIMEOUT);
+	if (retval < 0)
+		return retval;
+
+	radio->curfreq = freq;
+	return 0;
+}
+
+static int ma901radio_set_volume(struct ma901radio_device *radio, u16 vol_to_set)
+{
+	int retval;
+
+	radio->buffer[0] = 0x0a;
+	radio->buffer[1] = MA901_RADIO_SET_VOLUME;
+	radio->buffer[2] = 0xc2;
+	radio->buffer[3] = vol_to_set + 0x20;
+	radio->buffer[4] = 0x00;
+	radio->buffer[5] = 0x00;
+	radio->buffer[6] = 0x00;
+	radio->buffer[7] = 0x00;
+
+	retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+				9, 0x21, 0x0300, 0,
+				radio->buffer, BUFFER_LENGTH, USB_TIMEOUT);
+	if (retval < 0)
+		return retval;
+
+	radio->volume = vol_to_set;
+	return retval;
+}
+
+static int ma901_set_stereo(struct ma901radio_device *radio, u8 stereo)
+{
+	int retval;
+
+	radio->buffer[0] = 0x0a;
+	radio->buffer[1] = MA901_RADIO_SET_MONO_STEREO;
+	radio->buffer[2] = stereo;
+	radio->buffer[3] = 0x00;
+	radio->buffer[4] = 0x00;
+	radio->buffer[5] = 0x00;
+	radio->buffer[6] = 0x00;
+	radio->buffer[7] = 0x00;
+
+	retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+				9, 0x21, 0x0300, 0,
+				radio->buffer, BUFFER_LENGTH, USB_TIMEOUT);
+
+	if (retval < 0)
+		return retval;
+
+	if (stereo == MA901_WANT_STEREO)
+		radio->stereo = V4L2_TUNER_MODE_STEREO;
+	else
+		radio->stereo = V4L2_TUNER_MODE_MONO;
+
+	return retval;
+}
+
+/* Handle unplugging the device.
+ * We call video_unregister_device in any case.
+ * The last function called in this procedure is
+ * usb_ma901radio_device_release.
+ */
+static void usb_ma901radio_disconnect(struct usb_interface *intf)
+{
+	struct ma901radio_device *radio = to_ma901radio_dev(usb_get_intfdata(intf));
+
+	mutex_lock(&radio->lock);
+	video_unregister_device(&radio->vdev);
+	usb_set_intfdata(intf, NULL);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	mutex_unlock(&radio->lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+/* vidioc_querycap - query device capabilities */
+static int vidioc_querycap(struct file *file, void *priv,
+					struct v4l2_capability *v)
+{
+	struct ma901radio_device *radio = video_drvdata(file);
+
+	strscpy(v->driver, "radio-ma901", sizeof(v->driver));
+	strscpy(v->card, "Masterkit MA901 USB FM Radio", sizeof(v->card));
+	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
+	return 0;
+}
+
+/* vidioc_g_tuner - get tuner attributes */
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	struct ma901radio_device *radio = video_drvdata(file);
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	v->signal = 0;
+
+	/* TODO: the same words like in _probe() goes here.
+	 * When receiving of stats will be implemented then we can call
+	 * ma901radio_get_stat().
+	 * retval = ma901radio_get_stat(radio, &is_stereo, &v->signal);
+	 */
+
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->rangelow = FREQ_MIN * FREQ_MUL;
+	v->rangehigh = FREQ_MAX * FREQ_MUL;
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+	/* v->rxsubchans = is_stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; */
+	v->audmode = radio->stereo ?
+		V4L2_TUNER_MODE_STEREO : V4L2_TUNER_MODE_MONO;
+	return 0;
+}
+
+/* vidioc_s_tuner - set tuner attributes */
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *v)
+{
+	struct ma901radio_device *radio = video_drvdata(file);
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	/* mono/stereo selector */
+	switch (v->audmode) {
+	case V4L2_TUNER_MODE_MONO:
+		return ma901_set_stereo(radio, MA901_WANT_MONO);
+	default:
+		return ma901_set_stereo(radio, MA901_WANT_STEREO);
+	}
+}
+
+/* vidioc_s_frequency - set tuner radio frequency */
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct ma901radio_device *radio = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+
+	return ma901radio_set_freq(radio, clamp_t(unsigned, f->frequency,
+				FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL));
+}
+
+/* vidioc_g_frequency - get tuner radio frequency */
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct ma901radio_device *radio = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->frequency = radio->curfreq;
+
+	return 0;
+}
+
+static int usb_ma901radio_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ma901radio_device *radio =
+		container_of(ctrl->handler, struct ma901radio_device, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_VOLUME:     /* set volume */
+		return ma901radio_set_volume(radio, (u16)ctrl->val);
+	}
+
+	return -EINVAL;
+}
+
+/* TODO: Should we really need to implement suspend and resume functions?
+ * Radio has it's own memory and will continue playing if power is present
+ * on usb port and on resume it will start to play again based on freq, volume
+ * values in device memory.
+ */
+static int usb_ma901radio_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	return 0;
+}
+
+static int usb_ma901radio_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops usb_ma901radio_ctrl_ops = {
+	.s_ctrl = usb_ma901radio_s_ctrl,
+};
+
+/* File system interface */
+static const struct v4l2_file_operations usb_ma901radio_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops usb_ma901radio_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static void usb_ma901radio_release(struct v4l2_device *v4l2_dev)
+{
+	struct ma901radio_device *radio = to_ma901radio_dev(v4l2_dev);
+
+	v4l2_ctrl_handler_free(&radio->hdl);
+	v4l2_device_unregister(&radio->v4l2_dev);
+	kfree(radio->buffer);
+	kfree(radio);
+}
+
+/* check if the device is present and register with v4l and usb if it is */
+static int usb_ma901radio_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct ma901radio_device *radio;
+	int retval = 0;
+
+	/* Masterkit MA901 usb radio has the same USB ID as many others
+	 * Atmel V-USB devices. Let's make additional checks to be sure
+	 * that this is our device.
+	 */
+
+	if (dev->product && dev->manufacturer &&
+		(strncmp(dev->product, "MA901", 5) != 0
+		|| strncmp(dev->manufacturer, "www.masterkit.ru", 16) != 0))
+		return -ENODEV;
+
+	radio = kzalloc_obj(struct ma901radio_device);
+	if (!radio) {
+		dev_err(&intf->dev, "kzalloc for ma901radio_device failed\n");
+		retval = -ENOMEM;
+		goto err;
+	}
+
+	radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
+	if (!radio->buffer) {
+		dev_err(&intf->dev, "kmalloc for radio->buffer failed\n");
+		retval = -ENOMEM;
+		goto err_nobuf;
+	}
+
+	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&intf->dev, "couldn't register v4l2_device\n");
+		goto err_v4l2;
+	}
+
+	v4l2_ctrl_handler_init(&radio->hdl, 1);
+
+	/* TODO:It looks like this radio doesn't have mute/unmute control
+	 * and windows program just emulate it using volume control.
+	 * Let's plan to do the same in this driver.
+	 *
+	 * v4l2_ctrl_new_std(&radio->hdl, &usb_ma901radio_ctrl_ops,
+	 *		  V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	 */
+
+	v4l2_ctrl_new_std(&radio->hdl, &usb_ma901radio_ctrl_ops,
+			  V4L2_CID_AUDIO_VOLUME, MA901_VOLUME_MIN,
+			  MA901_VOLUME_MAX, 1, MA901_VOLUME_MAX);
+
+	if (radio->hdl.error) {
+		retval = radio->hdl.error;
+		dev_err(&intf->dev, "couldn't register control\n");
+		goto err_ctrl;
+	}
+	mutex_init(&radio->lock);
+
+	radio->v4l2_dev.ctrl_handler = &radio->hdl;
+	radio->v4l2_dev.release = usb_ma901radio_release;
+	strscpy(radio->vdev.name, radio->v4l2_dev.name,
+		sizeof(radio->vdev.name));
+	radio->vdev.v4l2_dev = &radio->v4l2_dev;
+	radio->vdev.fops = &usb_ma901radio_fops;
+	radio->vdev.ioctl_ops = &usb_ma901radio_ioctl_ops;
+	radio->vdev.release = video_device_release_empty;
+	radio->vdev.lock = &radio->lock;
+	radio->vdev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER;
+
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->intf = intf;
+	usb_set_intfdata(intf, &radio->v4l2_dev);
+	radio->curfreq = 95.21 * FREQ_MUL;
+
+	video_set_drvdata(&radio->vdev, radio);
+
+	/* TODO: we can get some statistics (freq, volume) from device
+	 * but it's not implemented yet. After insertion in usb-port radio
+	 * setups frequency and starts playing without any initialization.
+	 * So we don't call usb_ma901radio_init/get_stat() here.
+	 * retval = usb_ma901radio_init(radio);
+	 */
+
+	retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO,
+					radio_nr);
+	if (retval < 0) {
+		dev_err(&intf->dev, "could not register video device\n");
+		goto err_vdev;
+	}
+
+	return 0;
+
+err_vdev:
+	v4l2_ctrl_handler_free(&radio->hdl);
+err_ctrl:
+	v4l2_device_unregister(&radio->v4l2_dev);
+err_v4l2:
+	kfree(radio->buffer);
+err_nobuf:
+	kfree(radio);
+err:
+	return retval;
+}
+
+/* USB Device ID List */
+static const struct usb_device_id usb_ma901radio_device_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(USB_MA901_VENDOR, USB_MA901_PRODUCT,
+							USB_CLASS_HID, 0, 0) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_ma901radio_device_table);
+
+/* USB subsystem interface */
+static struct usb_driver usb_ma901radio_driver = {
+	.name			= MA901_DRIVER_NAME,
+	.probe			= usb_ma901radio_probe,
+	.disconnect		= usb_ma901radio_disconnect,
+	.suspend		= usb_ma901radio_suspend,
+	.resume			= usb_ma901radio_resume,
+	.reset_resume		= usb_ma901radio_resume,
+	.id_table		= usb_ma901radio_device_table,
+};
+
+module_usb_driver(usb_ma901radio_driver);
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
new file mode 100644
index 000000000..8ab1dacf8
--- /dev/null
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Guillemot Maxi Radio FM 2000 PCI radio card driver for Linux
+ * (C) 2001 Dimitromanolakis Apostolos <apdim@grecian.net>
+ *
+ * Based in the radio Maestro PCI driver. Actually it uses the same chip
+ * for radio but different pci controller.
+ *
+ * I didn't have any specs I reversed engineered the protocol from
+ * the windows driver (radio.dll).
+ *
+ * The card uses the TEA5757 chip that includes a search function but it
+ * is useless as I haven't found any way to read back the frequency. If
+ * anybody does please mail me.
+ *
+ * For the pdf file see:
+ * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf
+ *
+ *
+ * CHANGES:
+ *   0.75b
+ *     - better pci interface thanks to Francois Romieu <romieu@cogenit.fr>
+ *
+ *   0.75      Sun Feb  4 22:51:27 EET 2001
+ *     - tiding up
+ *     - removed support for multiple devices as it didn't work anyway
+ *
+ * BUGS:
+ *   - card unmutes if you change frequency
+ *
+ * (c) 2006, 2007 by Mauro Carvalho Chehab <mchehab@kernel.org>:
+ *	- Conversion to V4L2 API
+ *      - Uses video_ioctl2 for parsing and to add debug support
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/videodev2.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <media/drv-intf/tea575x.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+
+MODULE_AUTHOR("Dimitromanolakis Apostolos, apdim@grecian.net");
+MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
+
+static int radio_nr = -1;
+module_param(radio_nr, int, 0644);
+MODULE_PARM_DESC(radio_nr, "Radio device number");
+
+/* TEA5757 pin mappings */
+static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16;
+
+static atomic_t maxiradio_instance = ATOMIC_INIT(0);
+
+#define PCI_VENDOR_ID_GUILLEMOT 0x5046
+#define PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO 0x1001
+
+struct maxiradio
+{
+	struct snd_tea575x tea;
+	struct v4l2_device v4l2_dev;
+	struct pci_dev *pdev;
+
+	u16	io;	/* base of radio io */
+};
+
+static inline struct maxiradio *to_maxiradio(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct maxiradio, v4l2_dev);
+}
+
+static void maxiradio_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
+{
+	struct maxiradio *dev = tea->private_data;
+	u8 bits = 0;
+
+	bits |= (pins & TEA575X_DATA) ? data : 0;
+	bits |= (pins & TEA575X_CLK)  ? clk  : 0;
+	bits |= (pins & TEA575X_WREN) ? wren : 0;
+	bits |= power;
+
+	outb(bits, dev->io);
+}
+
+/* Note: this card cannot read out the data of the shift registers,
+   only the mono/stereo pin works. */
+static u8 maxiradio_tea575x_get_pins(struct snd_tea575x *tea)
+{
+	struct maxiradio *dev = tea->private_data;
+	u8 bits = inb(dev->io);
+
+	return  ((bits & data) ? TEA575X_DATA : 0) |
+		((bits & mo_st) ? TEA575X_MOST : 0);
+}
+
+static void maxiradio_tea575x_set_direction(struct snd_tea575x *tea, bool output)
+{
+}
+
+static const struct snd_tea575x_ops maxiradio_tea_ops = {
+	.set_pins = maxiradio_tea575x_set_pins,
+	.get_pins = maxiradio_tea575x_get_pins,
+	.set_direction = maxiradio_tea575x_set_direction,
+};
+
+static int maxiradio_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	struct maxiradio *dev;
+	struct v4l2_device *v4l2_dev;
+	int retval = -ENOMEM;
+
+	dev = kzalloc_obj(*dev);
+	if (dev == NULL) {
+		dev_err(&pdev->dev, "not enough memory\n");
+		return -ENOMEM;
+	}
+
+	v4l2_dev = &dev->v4l2_dev;
+	v4l2_device_set_name(v4l2_dev, "maxiradio", &maxiradio_instance);
+
+	retval = v4l2_device_register(&pdev->dev, v4l2_dev);
+	if (retval < 0) {
+		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		goto errfr;
+	}
+	dev->tea.private_data = dev;
+	dev->tea.ops = &maxiradio_tea_ops;
+	/* The data pin cannot be read. This may be a hardware limitation, or
+	   we just don't know how to read it. */
+	dev->tea.cannot_read_data = true;
+	dev->tea.v4l2_dev = v4l2_dev;
+	dev->tea.radio_nr = radio_nr;
+	strscpy(dev->tea.card, "Maxi Radio FM2000", sizeof(dev->tea.card));
+
+	retval = -ENODEV;
+
+	if (!request_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0), v4l2_dev->name)) {
+		dev_err(&pdev->dev, "can't reserve I/O ports\n");
+		goto err_hdl;
+	}
+
+	if (pci_enable_device(pdev))
+		goto err_out_free_region;
+
+	dev->io = pci_resource_start(pdev, 0);
+	if (snd_tea575x_init(&dev->tea, THIS_MODULE)) {
+		printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n");
+		goto err_out_free_region;
+	}
+	return 0;
+
+err_out_free_region:
+	release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+err_hdl:
+	v4l2_device_unregister(v4l2_dev);
+errfr:
+	kfree(dev);
+	return retval;
+}
+
+static void maxiradio_remove(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
+	struct maxiradio *dev = to_maxiradio(v4l2_dev);
+
+	snd_tea575x_exit(&dev->tea);
+	/* Turn off power */
+	outb(0, dev->io);
+	v4l2_device_unregister(v4l2_dev);
+	release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+	kfree(dev);
+}
+
+static const struct pci_device_id maxiradio_pci_tbl[] = {
+	{ PCI_VENDOR_ID_GUILLEMOT, PCI_DEVICE_ID_GUILLEMOT_MAXIRADIO,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, maxiradio_pci_tbl);
+
+static struct pci_driver maxiradio_driver = {
+	.name		= "radio-maxiradio",
+	.id_table	= maxiradio_pci_tbl,
+	.probe		= maxiradio_probe,
+	.remove		= maxiradio_remove,
+};
+
+module_pci_driver(maxiradio_driver);
diff --git a/drivers/media/radio/radio-miropcm20.c b/drivers/media/radio/radio-miropcm20.c
new file mode 100644
index 000000000..67712ab3d
--- /dev/null
+++ b/drivers/media/radio/radio-miropcm20.c
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Miro PCM20 radio driver for Linux radio support
+ * (c) 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
+ * Thanks to Norberto Pellici for the ACI device interface specification
+ * The API part is based on the radiotrack driver by M. Kirkwood
+ * This driver relies on the aci mixer provided by the snd-miro
+ * ALSA driver.
+ * Look there for further info...
+ *
+ * From the original miro RDS sources:
+ *
+ *  (c) 2001 Robert Siemer <Robert.Siemer@gmx.de>
+ *
+ *  Many thanks to Fred Seidel <seidel@metabox.de>, the
+ *  designer of the RDS decoder hardware. With his help
+ *  I was able to code this driver.
+ *  Thanks also to Norberto Pellicci, Dominic Mounteney
+ *  <DMounteney@pinnaclesys.com> and www.teleauskunft.de
+ *  for good hints on finding Fred. It was somewhat hard
+ *  to locate him here in Germany... [:
+ *
+ * This code has been reintroduced and converted to use
+ * the new V4L2 RDS API by:
+ *
+ * Hans Verkuil <hverkuil@kernel.org>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <linux/kthread.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+#include <sound/aci.h>
+
+#define RDS_DATASHIFT          2   /* Bit 2 */
+#define RDS_DATAMASK        (1 << RDS_DATASHIFT)
+#define RDS_BUSYMASK        0x10   /* Bit 4 */
+#define RDS_CLOCKMASK       0x08   /* Bit 3 */
+#define RDS_DATA(x)         (((x) >> RDS_DATASHIFT) & 1)
+
+#define RDS_STATUS      0x01
+#define RDS_STATIONNAME 0x02
+#define RDS_TEXT        0x03
+#define RDS_ALTFREQ     0x04
+#define RDS_TIMEDATE    0x05
+#define RDS_PI_CODE     0x06
+#define RDS_PTYTATP     0x07
+#define RDS_RESET       0x08
+#define RDS_RXVALUE     0x09
+
+static int radio_nr = -1;
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX).  Default: -1 (autodetect)");
+
+struct pcm20 {
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct v4l2_ctrl_handler ctrl_handler;
+	struct v4l2_ctrl *rds_pty;
+	struct v4l2_ctrl *rds_ps_name;
+	struct v4l2_ctrl *rds_radio_test;
+	struct v4l2_ctrl *rds_ta;
+	struct v4l2_ctrl *rds_tp;
+	struct v4l2_ctrl *rds_ms;
+	/* thread for periodic RDS status checking */
+	struct task_struct *kthread;
+	unsigned long freq;
+	u32 audmode;
+	struct snd_miro_aci *aci;
+	struct mutex lock;
+};
+
+static struct pcm20 pcm20_card = {
+	.freq = 87 * 16000,
+	.audmode = V4L2_TUNER_MODE_STEREO,
+};
+
+
+static int rds_waitread(struct snd_miro_aci *aci)
+{
+	u8 byte;
+	int i = 2000;
+
+	do {
+		byte = inb(aci->aci_port + ACI_REG_RDS);
+		i--;
+	} while ((byte & RDS_BUSYMASK) && i);
+
+	/*
+	 * It's magic, but without this the data that you read later on
+	 * is unreliable and full of bit errors. With this 1 usec delay
+	 * everything is fine.
+	 */
+	udelay(1);
+	return i ? byte : -1;
+}
+
+static int rds_rawwrite(struct snd_miro_aci *aci, u8 byte)
+{
+	if (rds_waitread(aci) >= 0) {
+		outb(byte, aci->aci_port + ACI_REG_RDS);
+		return 0;
+	}
+	return -1;
+}
+
+static int rds_write(struct snd_miro_aci *aci, u8 byte)
+{
+	u8 sendbuffer[8];
+	int i;
+
+	for (i = 7; i >= 0; i--)
+		sendbuffer[7 - i] = (byte & (1 << i)) ? RDS_DATAMASK : 0;
+	sendbuffer[0] |= RDS_CLOCKMASK;
+
+	for (i = 0; i < 8; i++)
+		rds_rawwrite(aci, sendbuffer[i]);
+	return 0;
+}
+
+static int rds_readcycle_nowait(struct snd_miro_aci *aci)
+{
+	outb(0, aci->aci_port + ACI_REG_RDS);
+	return rds_waitread(aci);
+}
+
+static int rds_readcycle(struct snd_miro_aci *aci)
+{
+	if (rds_rawwrite(aci, 0) < 0)
+		return -1;
+	return rds_waitread(aci);
+}
+
+static int rds_ack(struct snd_miro_aci *aci)
+{
+	int i = rds_readcycle(aci);
+
+	if (i < 0)
+		return -1;
+	if (i & RDS_DATAMASK)
+		return 0;  /* ACK  */
+	return 1;  /* NACK */
+}
+
+static int rds_cmd(struct snd_miro_aci *aci, u8 cmd, u8 databuffer[], u8 datasize)
+{
+	int i, j;
+
+	rds_write(aci, cmd);
+
+	/* RDS_RESET doesn't need further processing */
+	if (cmd == RDS_RESET)
+		return 0;
+	if (rds_ack(aci))
+		return -EIO;
+	if (datasize == 0)
+		return 0;
+
+	/* to be able to use rds_readcycle_nowait()
+	   I have to waitread() here */
+	if (rds_waitread(aci) < 0)
+		return -1;
+
+	memset(databuffer, 0, datasize);
+
+	for (i = 0; i < 8 * datasize; i++) {
+		j = rds_readcycle_nowait(aci);
+		if (j < 0)
+			return -EIO;
+		databuffer[i / 8] |= RDS_DATA(j) << (7 - (i % 8));
+	}
+	return 0;
+}
+
+static int pcm20_setfreq(struct pcm20 *dev, unsigned long freq)
+{
+	unsigned char freql;
+	unsigned char freqh;
+	struct snd_miro_aci *aci = dev->aci;
+
+	freq /= 160;
+	if (!(aci->aci_version == 0x07 || aci->aci_version >= 0xb0))
+		freq /= 10;  /* I don't know exactly which version
+			      * needs this hack */
+	freql = freq & 0xff;
+	freqh = freq >> 8;
+
+	rds_cmd(aci, RDS_RESET, NULL, 0);
+	return snd_aci_cmd(aci, ACI_WRITE_TUNE, freql, freqh);
+}
+
+static int vidioc_querycap(struct file *file, void *priv,
+				struct v4l2_capability *v)
+{
+	strscpy(v->driver, "Miro PCM20", sizeof(v->driver));
+	strscpy(v->card, "Miro PCM20", sizeof(v->card));
+	strscpy(v->bus_info, "ISA:radio-miropcm20", sizeof(v->bus_info));
+	return 0;
+}
+
+static bool sanitize(char *p, int size)
+{
+	int i;
+	bool ret = true;
+
+	for (i = 0; i < size; i++) {
+		if (p[i] < 32) {
+			p[i] = ' ';
+			ret = false;
+		}
+	}
+	return ret;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	struct pcm20 *dev = video_drvdata(file);
+	int res;
+	u8 buf;
+
+	if (v->index)
+		return -EINVAL;
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->rangelow = 87*16000;
+	v->rangehigh = 108*16000;
+	res = snd_aci_cmd(dev->aci, ACI_READ_TUNERSTATION, -1, -1);
+	v->signal = (res & 0x80) ? 0 : 0xffff;
+	/* Note: stereo detection does not work if the audio is muted,
+	   it will default to mono in that case. */
+	res = snd_aci_cmd(dev->aci, ACI_READ_TUNERSTEREO, -1, -1);
+	v->rxsubchans = (res & 0x40) ? V4L2_TUNER_SUB_MONO :
+					V4L2_TUNER_SUB_STEREO;
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_CONTROLS;
+	v->audmode = dev->audmode;
+	res = rds_cmd(dev->aci, RDS_RXVALUE, &buf, 1);
+	if (res >= 0 && buf)
+		v->rxsubchans |= V4L2_TUNER_SUB_RDS;
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *v)
+{
+	struct pcm20 *dev = video_drvdata(file);
+
+	if (v->index)
+		return -EINVAL;
+	if (v->audmode > V4L2_TUNER_MODE_STEREO)
+		dev->audmode = V4L2_TUNER_MODE_STEREO;
+	else
+		dev->audmode = v->audmode;
+	snd_aci_cmd(dev->aci, ACI_SET_TUNERMONO,
+			dev->audmode == V4L2_TUNER_MODE_MONO, -1);
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct pcm20 *dev = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = dev->freq;
+	return 0;
+}
+
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct pcm20 *dev = video_drvdata(file);
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	dev->freq = clamp_t(u32, f->frequency, 87 * 16000U, 108 * 16000U);
+	pcm20_setfreq(dev, dev->freq);
+	return 0;
+}
+
+static int pcm20_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct pcm20 *dev = container_of(ctrl->handler, struct pcm20, ctrl_handler);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		snd_aci_cmd(dev->aci, ACI_SET_TUNERMUTE, ctrl->val, -1);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int pcm20_thread(void *data)
+{
+	struct pcm20 *dev = data;
+	const unsigned no_rds_start_counter = 5;
+	const unsigned sleep_msecs = 2000;
+	unsigned no_rds_counter = no_rds_start_counter;
+
+	for (;;) {
+		char text_buffer[66];
+		u8 buf;
+		int res;
+
+		msleep_interruptible(sleep_msecs);
+
+		if (kthread_should_stop())
+			break;
+
+		res = rds_cmd(dev->aci, RDS_RXVALUE, &buf, 1);
+		if (res)
+			continue;
+		if (buf == 0) {
+			if (no_rds_counter == 0)
+				continue;
+			no_rds_counter--;
+			if (no_rds_counter)
+				continue;
+
+			/*
+			 * No RDS seen for no_rds_start_counter * sleep_msecs
+			 * milliseconds, clear all RDS controls to their
+			 * default values.
+			 */
+			v4l2_ctrl_s_ctrl_string(dev->rds_ps_name, "");
+			v4l2_ctrl_s_ctrl(dev->rds_ms, 1);
+			v4l2_ctrl_s_ctrl(dev->rds_ta, 0);
+			v4l2_ctrl_s_ctrl(dev->rds_tp, 0);
+			v4l2_ctrl_s_ctrl(dev->rds_pty, 0);
+			v4l2_ctrl_s_ctrl_string(dev->rds_radio_test, "");
+			continue;
+		}
+		no_rds_counter = no_rds_start_counter;
+
+		res = rds_cmd(dev->aci, RDS_STATUS, &buf, 1);
+		if (res)
+			continue;
+		if ((buf >> 3) & 1) {
+			res = rds_cmd(dev->aci, RDS_STATIONNAME, text_buffer, 8);
+			text_buffer[8] = 0;
+			if (!res && sanitize(text_buffer, 8))
+				v4l2_ctrl_s_ctrl_string(dev->rds_ps_name, text_buffer);
+		}
+		if ((buf >> 6) & 1) {
+			u8 pty;
+
+			res = rds_cmd(dev->aci, RDS_PTYTATP, &pty, 1);
+			if (!res) {
+				v4l2_ctrl_s_ctrl(dev->rds_ms, !!(pty & 0x01));
+				v4l2_ctrl_s_ctrl(dev->rds_ta, !!(pty & 0x02));
+				v4l2_ctrl_s_ctrl(dev->rds_tp, !!(pty & 0x80));
+				v4l2_ctrl_s_ctrl(dev->rds_pty, (pty >> 2) & 0x1f);
+			}
+		}
+		if ((buf >> 4) & 1) {
+			res = rds_cmd(dev->aci, RDS_TEXT, text_buffer, 65);
+			text_buffer[65] = 0;
+			if (!res && sanitize(text_buffer + 1, 64))
+				v4l2_ctrl_s_ctrl_string(dev->rds_radio_test, text_buffer + 1);
+		}
+	}
+	return 0;
+}
+
+static int pcm20_open(struct file *file)
+{
+	struct pcm20 *dev = video_drvdata(file);
+	int res = v4l2_fh_open(file);
+
+	if (!res && v4l2_fh_is_singular_file(file) &&
+	    IS_ERR_OR_NULL(dev->kthread)) {
+		dev->kthread = kthread_run(pcm20_thread, dev, "%s",
+					   dev->v4l2_dev.name);
+		if (IS_ERR(dev->kthread)) {
+			v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n");
+			v4l2_fh_release(file);
+			return PTR_ERR(dev->kthread);
+		}
+	}
+	return res;
+}
+
+static int pcm20_release(struct file *file)
+{
+	struct pcm20 *dev = video_drvdata(file);
+
+	if (v4l2_fh_is_singular_file(file) && !IS_ERR_OR_NULL(dev->kthread)) {
+		kthread_stop(dev->kthread);
+		dev->kthread = NULL;
+	}
+	return v4l2_fh_release(file);
+}
+
+static const struct v4l2_file_operations pcm20_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pcm20_open,
+	.poll		= v4l2_ctrl_poll,
+	.release	= pcm20_release,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops pcm20_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct v4l2_ctrl_ops pcm20_ctrl_ops = {
+	.s_ctrl = pcm20_s_ctrl,
+};
+
+static int __init pcm20_init(void)
+{
+	struct pcm20 *dev = &pcm20_card;
+	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
+	struct v4l2_ctrl_handler *hdl;
+	int res;
+
+	dev->aci = snd_aci_get_aci();
+	if (dev->aci == NULL) {
+		v4l2_err(v4l2_dev,
+			 "you must load the snd-miro driver first!\n");
+		return -ENODEV;
+	}
+	strscpy(v4l2_dev->name, "radio-miropcm20", sizeof(v4l2_dev->name));
+	mutex_init(&dev->lock);
+
+	res = v4l2_device_register(NULL, v4l2_dev);
+	if (res < 0) {
+		v4l2_err(v4l2_dev, "could not register v4l2_device\n");
+		return -EINVAL;
+	}
+
+	hdl = &dev->ctrl_handler;
+	v4l2_ctrl_handler_init(hdl, 7);
+	v4l2_ctrl_new_std(hdl, &pcm20_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	dev->rds_pty = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_RDS_RX_PTY, 0, 0x1f, 1, 0);
+	dev->rds_ps_name = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_RDS_RX_PS_NAME, 0, 8, 8, 0);
+	dev->rds_radio_test = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_RDS_RX_RADIO_TEXT, 0, 64, 64, 0);
+	dev->rds_ta = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0);
+	dev->rds_tp = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_RDS_RX_TRAFFIC_PROGRAM, 0, 1, 1, 0);
+	dev->rds_ms = v4l2_ctrl_new_std(hdl, NULL,
+			V4L2_CID_RDS_RX_MUSIC_SPEECH, 0, 1, 1, 1);
+	v4l2_dev->ctrl_handler = hdl;
+	if (hdl->error) {
+		res = hdl->error;
+		v4l2_err(v4l2_dev, "Could not register control\n");
+		goto err_hdl;
+	}
+	strscpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name));
+	dev->vdev.v4l2_dev = v4l2_dev;
+	dev->vdev.fops = &pcm20_fops;
+	dev->vdev.ioctl_ops = &pcm20_ioctl_ops;
+	dev->vdev.release = video_device_release_empty;
+	dev->vdev.lock = &dev->lock;
+	dev->vdev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO |
+				V4L2_CAP_RDS_CAPTURE;
+	video_set_drvdata(&dev->vdev, dev);
+	snd_aci_cmd(dev->aci, ACI_SET_TUNERMONO,
+			dev->audmode == V4L2_TUNER_MODE_MONO, -1);
+	pcm20_setfreq(dev, dev->freq);
+
+	if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0)
+		goto err_hdl;
+
+	v4l2_info(v4l2_dev, "Mirosound PCM20 Radio tuner\n");
+	return 0;
+err_hdl:
+	v4l2_ctrl_handler_free(hdl);
+	v4l2_device_unregister(v4l2_dev);
+	return -EINVAL;
+}
+
+MODULE_AUTHOR("Ruurd Reitsma, Krzysztof Helt");
+MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card.");
+MODULE_LICENSE("GPL");
+
+static void __exit pcm20_cleanup(void)
+{
+	struct pcm20 *dev = &pcm20_card;
+
+	video_unregister_device(&dev->vdev);
+	snd_aci_cmd(dev->aci, ACI_SET_TUNERMUTE, 1, -1);
+	v4l2_ctrl_handler_free(&dev->ctrl_handler);
+	v4l2_device_unregister(&dev->v4l2_dev);
+}
+
+module_init(pcm20_init);
+module_exit(pcm20_cleanup);
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
new file mode 100644
index 000000000..d5a6053e1
--- /dev/null
+++ b/drivers/media/radio/radio-mr800.c
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * A driver for the AverMedia MR 800 USB FM radio. This device plugs
+ * into both the USB and an analog audio input, so this thing
+ * only deals with initialization and frequency setting, the
+ * audio data has to be handled by a sound driver.
+ *
+ * Copyright (c) 2008 Alexey Klimov <klimov.linux@gmail.com>
+ */
+
+/*
+ * Big thanks to authors and contributors of dsbr100.c and radio-si470x.c
+ *
+ * When work was looked pretty good, i discover this:
+ * http://av-usbradio.sourceforge.net/index.php
+ * http://sourceforge.net/projects/av-usbradio/
+ * Latest release of theirs project was in 2005.
+ * Probably, this driver could be improved through using their
+ * achievements (specifications given).
+ * Also, Faidon Liambotis <paravoid@debian.org> wrote nice driver for this radio
+ * in 2007. He allowed to use his driver to improve current mr800 radio driver.
+ * http://www.spinics.net/lists/linux-usb-devel/msg10109.html
+ *
+ * Version 0.01:	First working version.
+ *			It's required to blacklist AverMedia USB Radio
+ *			in usbhid/hid-quirks.c
+ * Version 0.10:	A lot of cleanups and fixes: unpluging the device,
+ *			few mutex locks were added, codinstyle issues, etc.
+ *			Added stereo support. Thanks to
+ *			Douglas Schilling Landgraf <dougsland@gmail.com> and
+ *			David Ellingsworth <david@identd.dyndns.org>
+ *			for discussion, help and support.
+ * Version 0.11:	Converted to v4l2_device.
+ *
+ * Many things to do:
+ *	- Correct power management of device (suspend & resume)
+ *	- Add code for scanning and smooth tuning
+ *	- Add code for sensitivity value
+ *	- Correct mistakes
+ *	- In Japan another FREQ_MIN and FREQ_MAX
+ */
+
+/* kernel includes */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+
+/* driver and module definitions */
+#define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>"
+#define DRIVER_DESC "AverMedia MR 800 USB FM radio driver"
+#define DRIVER_VERSION "0.1.2"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
+
+#define USB_AMRADIO_VENDOR 0x07ca
+#define USB_AMRADIO_PRODUCT 0xb800
+
+/* dev_warn macro with driver name */
+#define MR800_DRIVER_NAME "radio-mr800"
+#define amradio_dev_warn(dev, fmt, arg...)				\
+		dev_warn(dev, MR800_DRIVER_NAME " - " fmt, ##arg)
+
+#define amradio_dev_err(dev, fmt, arg...) \
+		dev_err(dev, MR800_DRIVER_NAME " - " fmt, ##arg)
+
+/* Probably USB_TIMEOUT should be modified in module parameter */
+#define BUFFER_LENGTH 8
+#define USB_TIMEOUT 500
+
+/* Frequency limits in MHz -- these are European values.  For Japanese
+devices, that would be 76 and 91.  */
+#define FREQ_MIN  87.5
+#define FREQ_MAX 108.0
+#define FREQ_MUL 16000
+
+/*
+ * Commands that device should understand
+ * List isn't full and will be updated with implementation of new functions
+ */
+#define AMRADIO_SET_FREQ	0xa4
+#define AMRADIO_GET_READY_FLAG	0xa5
+#define AMRADIO_GET_SIGNAL	0xa7
+#define AMRADIO_GET_FREQ	0xa8
+#define AMRADIO_SET_SEARCH_UP	0xa9
+#define AMRADIO_SET_SEARCH_DOWN	0xaa
+#define AMRADIO_SET_MUTE	0xab
+#define AMRADIO_SET_RIGHT_MUTE	0xac
+#define AMRADIO_SET_LEFT_MUTE	0xad
+#define AMRADIO_SET_MONO	0xae
+#define AMRADIO_SET_SEARCH_LVL	0xb0
+#define AMRADIO_STOP_SEARCH	0xb1
+
+/* Comfortable defines for amradio_set_stereo */
+#define WANT_STEREO		0x00
+#define WANT_MONO		0x01
+
+/* module parameter */
+static int radio_nr = -1;
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr, "Radio Nr");
+
+/* Data for one (physical) device */
+struct amradio_device {
+	/* reference to USB and video device */
+	struct usb_device *usbdev;
+	struct usb_interface *intf;
+	struct video_device vdev;
+	struct v4l2_device v4l2_dev;
+	struct v4l2_ctrl_handler hdl;
+
+	u8 *buffer;
+	struct mutex lock;	/* buffer locking */
+	int curfreq;
+	int stereo;
+	int muted;
+};
+
+static inline struct amradio_device *to_amradio_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct amradio_device, v4l2_dev);
+}
+
+static int amradio_send_cmd(struct amradio_device *radio, u8 cmd, u8 arg,
+		u8 *extra, u8 extralen, bool reply)
+{
+	int retval;
+	int size;
+
+	radio->buffer[0] = 0x00;
+	radio->buffer[1] = 0x55;
+	radio->buffer[2] = 0xaa;
+	radio->buffer[3] = extralen;
+	radio->buffer[4] = cmd;
+	radio->buffer[5] = arg;
+	radio->buffer[6] = 0x00;
+	radio->buffer[7] = extra || reply ? 8 : 0;
+
+	retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2),
+		radio->buffer, BUFFER_LENGTH, &size, USB_TIMEOUT);
+
+	if (retval < 0 || size != BUFFER_LENGTH) {
+		if (video_is_registered(&radio->vdev))
+			amradio_dev_warn(&radio->vdev.dev,
+					"cmd %02x failed\n", cmd);
+		return retval ? retval : -EIO;
+	}
+	if (!extra && !reply)
+		return 0;
+
+	if (extra) {
+		memcpy(radio->buffer, extra, extralen);
+		memset(radio->buffer + extralen, 0, 8 - extralen);
+		retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2),
+			radio->buffer, BUFFER_LENGTH, &size, USB_TIMEOUT);
+	} else {
+		memset(radio->buffer, 0, 8);
+		retval = usb_bulk_msg(radio->usbdev, usb_rcvbulkpipe(radio->usbdev, 0x81),
+			radio->buffer, BUFFER_LENGTH, &size, USB_TIMEOUT);
+	}
+	if (retval == 0 && size == BUFFER_LENGTH)
+		return 0;
+	if (video_is_registered(&radio->vdev) && cmd != AMRADIO_GET_READY_FLAG)
+		amradio_dev_warn(&radio->vdev.dev, "follow-up to cmd %02x failed\n", cmd);
+	return retval ? retval : -EIO;
+}
+
+/* switch on/off the radio. Send 8 bytes to device */
+static int amradio_set_mute(struct amradio_device *radio, bool mute)
+{
+	int ret = amradio_send_cmd(radio,
+			AMRADIO_SET_MUTE, mute, NULL, 0, false);
+
+	if (!ret)
+		radio->muted = mute;
+	return ret;
+}
+
+/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
+static int amradio_set_freq(struct amradio_device *radio, int freq)
+{
+	unsigned short freq_send;
+	u8 buf[3];
+	int retval;
+
+	/* we need to be sure that frequency isn't out of range */
+	freq = clamp_t(unsigned, freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);
+	freq_send = 0x10 + (freq >> 3) / 25;
+
+	/* frequency is calculated from freq_send and placed in first 2 bytes */
+	buf[0] = (freq_send >> 8) & 0xff;
+	buf[1] = freq_send & 0xff;
+	buf[2] = 0x01;
+
+	retval = amradio_send_cmd(radio, AMRADIO_SET_FREQ, 0, buf, 3, false);
+	if (retval)
+		return retval;
+	radio->curfreq = freq;
+	msleep(40);
+	return 0;
+}
+
+static int amradio_set_stereo(struct amradio_device *radio, bool stereo)
+{
+	int ret = amradio_send_cmd(radio,
+			AMRADIO_SET_MONO, !stereo, NULL, 0, false);
+
+	if (!ret)
+		radio->stereo = stereo;
+	return ret;
+}
+
+static int amradio_get_stat(struct amradio_device *radio, bool *is_stereo, u32 *signal)
+{
+	int ret = amradio_send_cmd(radio,
+			AMRADIO_GET_SIGNAL, 0, NULL, 0, true);
+
+	if (ret)
+		return ret;
+	*is_stereo = radio->buffer[2] >> 7;
+	*signal = (radio->buffer[3] & 0xf0) << 8;
+	return 0;
+}
+
+/* Handle unplugging the device.
+ * We call video_unregister_device in any case.
+ * The last function called in this procedure is
+ * usb_amradio_device_release.
+ */
+static void usb_amradio_disconnect(struct usb_interface *intf)
+{
+	struct amradio_device *radio = to_amradio_dev(usb_get_intfdata(intf));
+
+	mutex_lock(&radio->lock);
+	video_unregister_device(&radio->vdev);
+	amradio_set_mute(radio, true);
+	usb_set_intfdata(intf, NULL);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	mutex_unlock(&radio->lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+/* vidioc_querycap - query device capabilities */
+static int vidioc_querycap(struct file *file, void *priv,
+					struct v4l2_capability *v)
+{
+	struct amradio_device *radio = video_drvdata(file);
+
+	strscpy(v->driver, "radio-mr800", sizeof(v->driver));
+	strscpy(v->card, "AverMedia MR 800 USB FM Radio", sizeof(v->card));
+	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
+	return 0;
+}
+
+/* vidioc_g_tuner - get tuner attributes */
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	struct amradio_device *radio = video_drvdata(file);
+	bool is_stereo = false;
+	int retval;
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	v->signal = 0;
+	retval = amradio_get_stat(radio, &is_stereo, &v->signal);
+	if (retval)
+		return retval;
+
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->rangelow = FREQ_MIN * FREQ_MUL;
+	v->rangehigh = FREQ_MAX * FREQ_MUL;
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+		V4L2_TUNER_CAP_HWSEEK_WRAP;
+	v->rxsubchans = is_stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
+	v->audmode = radio->stereo ?
+		V4L2_TUNER_MODE_STEREO : V4L2_TUNER_MODE_MONO;
+	return 0;
+}
+
+/* vidioc_s_tuner - set tuner attributes */
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *v)
+{
+	struct amradio_device *radio = video_drvdata(file);
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	/* mono/stereo selector */
+	switch (v->audmode) {
+	case V4L2_TUNER_MODE_MONO:
+		return amradio_set_stereo(radio, WANT_MONO);
+	default:
+		return amradio_set_stereo(radio, WANT_STEREO);
+	}
+}
+
+/* vidioc_s_frequency - set tuner radio frequency */
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct amradio_device *radio = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	return amradio_set_freq(radio, f->frequency);
+}
+
+/* vidioc_g_frequency - get tuner radio frequency */
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct amradio_device *radio = video_drvdata(file);
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = radio->curfreq;
+
+	return 0;
+}
+
+static int vidioc_s_hw_freq_seek(struct file *file, void *priv,
+		const struct v4l2_hw_freq_seek *seek)
+{
+	static u8 buf[8] = {
+		0x3d, 0x32, 0x0f, 0x08, 0x3d, 0x32, 0x0f, 0x08
+	};
+	struct amradio_device *radio = video_drvdata(file);
+	unsigned long timeout;
+	int retval;
+
+	if (seek->tuner != 0 || !seek->wrap_around)
+		return -EINVAL;
+
+	if (file->f_flags & O_NONBLOCK)
+		return -EWOULDBLOCK;
+
+	retval = amradio_send_cmd(radio,
+			AMRADIO_SET_SEARCH_LVL, 0, buf, 8, false);
+	if (retval)
+		return retval;
+	amradio_set_freq(radio, radio->curfreq);
+	retval = amradio_send_cmd(radio,
+		seek->seek_upward ? AMRADIO_SET_SEARCH_UP : AMRADIO_SET_SEARCH_DOWN,
+		0, NULL, 0, false);
+	if (retval)
+		return retval;
+	timeout = jiffies + msecs_to_jiffies(30000);
+	for (;;) {
+		if (time_after(jiffies, timeout)) {
+			retval = -ENODATA;
+			break;
+		}
+		if (schedule_timeout_interruptible(msecs_to_jiffies(10))) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+		retval = amradio_send_cmd(radio, AMRADIO_GET_READY_FLAG,
+				0, NULL, 0, true);
+		if (retval)
+			continue;
+		amradio_send_cmd(radio, AMRADIO_GET_FREQ, 0, NULL, 0, true);
+		if (radio->buffer[1] || radio->buffer[2]) {
+			/* To check: sometimes radio->curfreq is set to out of range value */
+			radio->curfreq = (radio->buffer[1] << 8) | radio->buffer[2];
+			radio->curfreq = (radio->curfreq - 0x10) * 200;
+			amradio_send_cmd(radio, AMRADIO_STOP_SEARCH,
+					0, NULL, 0, false);
+			amradio_set_freq(radio, radio->curfreq);
+			retval = 0;
+			break;
+		}
+	}
+	amradio_send_cmd(radio, AMRADIO_STOP_SEARCH, 0, NULL, 0, false);
+	amradio_set_freq(radio, radio->curfreq);
+	return retval;
+}
+
+static int usb_amradio_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct amradio_device *radio =
+		container_of(ctrl->handler, struct amradio_device, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		return amradio_set_mute(radio, ctrl->val);
+	}
+
+	return -EINVAL;
+}
+
+static int usb_amradio_init(struct amradio_device *radio)
+{
+	int retval;
+
+	retval = amradio_set_mute(radio, true);
+	if (retval)
+		goto out_err;
+	retval = amradio_set_stereo(radio, true);
+	if (retval)
+		goto out_err;
+	retval = amradio_set_freq(radio, radio->curfreq);
+	if (retval)
+		goto out_err;
+	return 0;
+
+out_err:
+	amradio_dev_err(&radio->vdev.dev, "initialization failed\n");
+	return retval;
+}
+
+/* Suspend device - stop device. Need to be checked and fixed */
+static int usb_amradio_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct amradio_device *radio = to_amradio_dev(usb_get_intfdata(intf));
+
+	mutex_lock(&radio->lock);
+	if (!radio->muted) {
+		amradio_set_mute(radio, true);
+		radio->muted = false;
+	}
+	mutex_unlock(&radio->lock);
+
+	dev_info(&intf->dev, "going into suspend..\n");
+	return 0;
+}
+
+/* Resume device - start device. Need to be checked and fixed */
+static int usb_amradio_resume(struct usb_interface *intf)
+{
+	struct amradio_device *radio = to_amradio_dev(usb_get_intfdata(intf));
+
+	mutex_lock(&radio->lock);
+	amradio_set_stereo(radio, radio->stereo);
+	amradio_set_freq(radio, radio->curfreq);
+
+	if (!radio->muted)
+		amradio_set_mute(radio, false);
+
+	mutex_unlock(&radio->lock);
+
+	dev_info(&intf->dev, "coming out of suspend..\n");
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops usb_amradio_ctrl_ops = {
+	.s_ctrl = usb_amradio_s_ctrl,
+};
+
+/* File system interface */
+static const struct v4l2_file_operations usb_amradio_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops usb_amradio_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_s_hw_freq_seek = vidioc_s_hw_freq_seek,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static void usb_amradio_release(struct v4l2_device *v4l2_dev)
+{
+	struct amradio_device *radio = to_amradio_dev(v4l2_dev);
+
+	/* free rest memory */
+	v4l2_ctrl_handler_free(&radio->hdl);
+	v4l2_device_unregister(&radio->v4l2_dev);
+	kfree(radio->buffer);
+	kfree(radio);
+}
+
+/* check if the device is present and register with v4l and usb if it is */
+static int usb_amradio_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct amradio_device *radio;
+	int retval;
+
+	radio = kzalloc_obj(struct amradio_device);
+
+	if (!radio) {
+		dev_err(&intf->dev, "kmalloc for amradio_device failed\n");
+		retval = -ENOMEM;
+		goto err;
+	}
+
+	radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
+
+	if (!radio->buffer) {
+		dev_err(&intf->dev, "kmalloc for radio->buffer failed\n");
+		retval = -ENOMEM;
+		goto err_nobuf;
+	}
+
+	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&intf->dev, "couldn't register v4l2_device\n");
+		goto err_v4l2;
+	}
+
+	v4l2_ctrl_handler_init(&radio->hdl, 1);
+	v4l2_ctrl_new_std(&radio->hdl, &usb_amradio_ctrl_ops,
+			  V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	if (radio->hdl.error) {
+		retval = radio->hdl.error;
+		dev_err(&intf->dev, "couldn't register control\n");
+		goto err_ctrl;
+	}
+	mutex_init(&radio->lock);
+
+	radio->v4l2_dev.ctrl_handler = &radio->hdl;
+	radio->v4l2_dev.release = usb_amradio_release;
+	strscpy(radio->vdev.name, radio->v4l2_dev.name,
+		sizeof(radio->vdev.name));
+	radio->vdev.v4l2_dev = &radio->v4l2_dev;
+	radio->vdev.fops = &usb_amradio_fops;
+	radio->vdev.ioctl_ops = &usb_amradio_ioctl_ops;
+	radio->vdev.release = video_device_release_empty;
+	radio->vdev.lock = &radio->lock;
+	radio->vdev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER |
+				  V4L2_CAP_HW_FREQ_SEEK;
+
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->intf = intf;
+	usb_set_intfdata(intf, &radio->v4l2_dev);
+	radio->curfreq = 95.16 * FREQ_MUL;
+
+	video_set_drvdata(&radio->vdev, radio);
+	retval = usb_amradio_init(radio);
+	if (retval)
+		goto err_vdev;
+
+	retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO,
+					radio_nr);
+	if (retval < 0) {
+		dev_err(&intf->dev, "could not register video device\n");
+		goto err_vdev;
+	}
+
+	return 0;
+
+err_vdev:
+	v4l2_ctrl_handler_free(&radio->hdl);
+err_ctrl:
+	v4l2_device_unregister(&radio->v4l2_dev);
+err_v4l2:
+	kfree(radio->buffer);
+err_nobuf:
+	kfree(radio);
+err:
+	return retval;
+}
+
+/* USB Device ID List */
+static const struct usb_device_id usb_amradio_device_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(USB_AMRADIO_VENDOR, USB_AMRADIO_PRODUCT,
+							USB_CLASS_HID, 0, 0) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_amradio_device_table);
+
+/* USB subsystem interface */
+static struct usb_driver usb_amradio_driver = {
+	.name			= MR800_DRIVER_NAME,
+	.probe			= usb_amradio_probe,
+	.disconnect		= usb_amradio_disconnect,
+	.suspend		= usb_amradio_suspend,
+	.resume			= usb_amradio_resume,
+	.reset_resume		= usb_amradio_resume,
+	.id_table		= usb_amradio_device_table,
+};
+
+module_usb_driver(usb_amradio_driver);
diff --git a/drivers/media/radio/radio-raremono.c b/drivers/media/radio/radio-raremono.c
new file mode 100644
index 000000000..6aa7c0978
--- /dev/null
+++ b/drivers/media/radio/radio-raremono.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/unaligned.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+
+/*
+ * 'Thanko's Raremono' is a Japanese si4734-based AM/FM/SW USB receiver:
+ *
+ * http://www.raremono.jp/product/484.html/
+ *
+ * The USB protocol has been reversed engineered using wireshark, initially
+ * by Dinesh Ram <dinesh.ram@cern.ch> and finished by Hans Verkuil
+ * <hverkuil@kernel.org>.
+ *
+ * Sadly the firmware used in this product hides lots of goodies since the
+ * si4734 has more features than are supported by the firmware. Oh well...
+ */
+
+/* driver and module definitions */
+MODULE_AUTHOR("Hans Verkuil <hverkuil@kernel.org>");
+MODULE_DESCRIPTION("Thanko's Raremono AM/FM/SW Receiver USB driver");
+MODULE_LICENSE("GPL v2");
+
+/*
+ * The Device announces itself as Cygnal Integrated Products, Inc.
+ *
+ * The vendor and product IDs (and in fact all other lsusb information as
+ * well) are identical to the si470x Silicon Labs USB FM Radio Reference
+ * Design board, even though this card has a si4734 device. Clearly the
+ * designer of this product never bothered to change the USB IDs.
+ */
+
+/* USB Device ID List */
+static const struct usb_device_id usb_raremono_device_table[] = {
+	{USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_raremono_device_table);
+
+#define BUFFER_LENGTH 64
+
+/* Timeout is set to a high value, could probably be reduced. Need more tests */
+#define USB_TIMEOUT 10000
+
+/* Frequency limits in KHz */
+#define FM_FREQ_RANGE_LOW	64000
+#define FM_FREQ_RANGE_HIGH	108000
+
+#define AM_FREQ_RANGE_LOW	520
+#define AM_FREQ_RANGE_HIGH	1710
+
+#define SW_FREQ_RANGE_LOW	2300
+#define SW_FREQ_RANGE_HIGH	26100
+
+enum { BAND_FM, BAND_AM, BAND_SW };
+
+static const struct v4l2_frequency_band bands[] = {
+	/* Band FM */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			      V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = FM_FREQ_RANGE_LOW * 16,
+		.rangehigh  = FM_FREQ_RANGE_HIGH * 16,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+	/* Band AM */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 1,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = AM_FREQ_RANGE_LOW * 16,
+		.rangehigh  = AM_FREQ_RANGE_HIGH * 16,
+		.modulation = V4L2_BAND_MODULATION_AM,
+	},
+	/* Band SW */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 2,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = SW_FREQ_RANGE_LOW * 16,
+		.rangehigh  = SW_FREQ_RANGE_HIGH * 16,
+		.modulation = V4L2_BAND_MODULATION_AM,
+	},
+};
+
+struct raremono_device {
+	struct usb_device *usbdev;
+	struct usb_interface *intf;
+	struct video_device vdev;
+	struct v4l2_device v4l2_dev;
+	struct mutex lock;
+
+	u8 *buffer;
+	u32 band;
+	unsigned curfreq;
+};
+
+static inline struct raremono_device *to_raremono_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct raremono_device, v4l2_dev);
+}
+
+/* Set frequency. */
+static int raremono_cmd_main(struct raremono_device *radio, unsigned band, unsigned freq)
+{
+	unsigned band_offset;
+	int ret;
+
+	switch (band) {
+	case BAND_FM:
+		band_offset = 1;
+		freq /= 10;
+		break;
+	case BAND_AM:
+		band_offset = 0;
+		break;
+	default:
+		band_offset = 2;
+		break;
+	}
+	radio->buffer[0] = 0x04 + band_offset;
+	radio->buffer[1] = freq >> 8;
+	radio->buffer[2] = freq & 0xff;
+
+	ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+			HID_REQ_SET_REPORT,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			0x0300 + radio->buffer[0], 2,
+			radio->buffer, 3, USB_TIMEOUT);
+
+	if (ret < 0) {
+		dev_warn(radio->v4l2_dev.dev, "%s failed (%d)\n", __func__, ret);
+		return ret;
+	}
+	radio->curfreq = (band == BAND_FM) ? freq * 10 : freq;
+	return 0;
+}
+
+/* Handle unplugging the device.
+ * We call video_unregister_device in any case.
+ * The last function called in this procedure is
+ * usb_raremono_device_release.
+ */
+static void usb_raremono_disconnect(struct usb_interface *intf)
+{
+	struct raremono_device *radio = to_raremono_dev(usb_get_intfdata(intf));
+
+	dev_info(&intf->dev, "Thanko's Raremono disconnected\n");
+
+	mutex_lock(&radio->lock);
+	usb_set_intfdata(intf, NULL);
+	video_unregister_device(&radio->vdev);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	mutex_unlock(&radio->lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+/*
+ * Linux Video interface
+ */
+static int vidioc_querycap(struct file *file, void *priv,
+					struct v4l2_capability *v)
+{
+	struct raremono_device *radio = video_drvdata(file);
+
+	strscpy(v->driver, "radio-raremono", sizeof(v->driver));
+	strscpy(v->card, "Thanko's Raremono", sizeof(v->card));
+	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
+	return 0;
+}
+
+static int vidioc_enum_freq_bands(struct file *file, void *priv,
+		struct v4l2_frequency_band *band)
+{
+	if (band->tuner != 0)
+		return -EINVAL;
+
+	if (band->index >= ARRAY_SIZE(bands))
+		return -EINVAL;
+
+	*band = bands[band->index];
+
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+		struct v4l2_tuner *v)
+{
+	struct raremono_device *radio = video_drvdata(file);
+	int ret;
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	strscpy(v->name, "AM/FM/SW", sizeof(v->name));
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+		V4L2_TUNER_CAP_FREQ_BANDS;
+	v->rangelow = AM_FREQ_RANGE_LOW * 16;
+	v->rangehigh = FM_FREQ_RANGE_HIGH * 16;
+	v->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
+	v->audmode = (radio->curfreq < FM_FREQ_RANGE_LOW) ?
+		V4L2_TUNER_MODE_MONO : V4L2_TUNER_MODE_STEREO;
+	memset(radio->buffer, 1, BUFFER_LENGTH);
+	ret = usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			1, 0xa1, 0x030d, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT);
+
+	if (ret < 0) {
+		dev_warn(radio->v4l2_dev.dev, "%s failed (%d)\n", __func__, ret);
+		return ret;
+	}
+	v->signal = ((radio->buffer[1] & 0xf) << 8 | radio->buffer[2]) << 4;
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+					const struct v4l2_tuner *v)
+{
+	return v->index ? -EINVAL : 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct raremono_device *radio = video_drvdata(file);
+	u32 freq;
+	unsigned band;
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	if (f->frequency >= (FM_FREQ_RANGE_LOW + SW_FREQ_RANGE_HIGH) * 8)
+		band = BAND_FM;
+	else if (f->frequency <= (AM_FREQ_RANGE_HIGH + SW_FREQ_RANGE_LOW) * 8)
+		band = BAND_AM;
+	else
+		band = BAND_SW;
+
+	freq = clamp_t(u32, f->frequency, bands[band].rangelow, bands[band].rangehigh);
+	return raremono_cmd_main(radio, band, freq / 16);
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct raremono_device *radio = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = radio->curfreq * 16;
+	return 0;
+}
+
+static void raremono_device_release(struct v4l2_device *v4l2_dev)
+{
+	struct raremono_device *radio = to_raremono_dev(v4l2_dev);
+
+	kfree(radio->buffer);
+	kfree(radio);
+}
+
+/* File system interface */
+static const struct v4l2_file_operations usb_raremono_fops = {
+	.owner		= THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = v4l2_fh_release,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops usb_raremono_ioctl_ops = {
+	.vidioc_querycap = vidioc_querycap,
+	.vidioc_g_tuner = vidioc_g_tuner,
+	.vidioc_s_tuner = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_enum_freq_bands = vidioc_enum_freq_bands,
+};
+
+/* check if the device is present and register with v4l and usb if it is */
+static int usb_raremono_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct raremono_device *radio;
+	int retval = 0;
+
+	radio = kzalloc_obj(*radio);
+	if (!radio)
+		return -ENOMEM;
+	radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
+	if (!radio->buffer) {
+		kfree(radio);
+		return -ENOMEM;
+	}
+
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->intf = intf;
+
+	/*
+	 * This device uses the same USB IDs as the si470x SiLabs reference
+	 * design. So do an additional check: attempt to read the device ID
+	 * from the si470x: the lower 12 bits are 0x0242 for the si470x. The
+	 * Raremono always returns 0x0800 (the meaning of that is unknown, but
+	 * at least it works).
+	 *
+	 * We use this check to determine which device we are dealing with.
+	 */
+	msleep(20);
+	retval = usb_control_msg(radio->usbdev,
+		usb_rcvctrlpipe(radio->usbdev, 0),
+		HID_REQ_GET_REPORT,
+		USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+		1, 2,
+		radio->buffer, 3, 500);
+	if (retval != 3 ||
+	    (get_unaligned_be16(&radio->buffer[1]) & 0xfff) == 0x0242) {
+		dev_info(&intf->dev, "this is not Thanko's Raremono.\n");
+		retval = -ENODEV;
+		goto free_mem;
+	}
+
+	dev_info(&intf->dev, "Thanko's Raremono connected: (%04X:%04X)\n",
+			id->idVendor, id->idProduct);
+
+	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&intf->dev, "couldn't register v4l2_device\n");
+		goto free_mem;
+	}
+
+	mutex_init(&radio->lock);
+
+	strscpy(radio->vdev.name, radio->v4l2_dev.name,
+		sizeof(radio->vdev.name));
+	radio->vdev.v4l2_dev = &radio->v4l2_dev;
+	radio->vdev.fops = &usb_raremono_fops;
+	radio->vdev.ioctl_ops = &usb_raremono_ioctl_ops;
+	radio->vdev.lock = &radio->lock;
+	radio->vdev.release = video_device_release_empty;
+	radio->vdev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	radio->v4l2_dev.release = raremono_device_release;
+
+	usb_set_intfdata(intf, &radio->v4l2_dev);
+
+	video_set_drvdata(&radio->vdev, radio);
+
+	raremono_cmd_main(radio, BAND_FM, 95160);
+
+	retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1);
+	if (retval == 0) {
+		dev_info(&intf->dev, "V4L2 device registered as %s\n",
+				video_device_node_name(&radio->vdev));
+		return 0;
+	}
+	dev_err(&intf->dev, "could not register video device\n");
+	v4l2_device_unregister(&radio->v4l2_dev);
+
+free_mem:
+	kfree(radio->buffer);
+	kfree(radio);
+	return retval;
+}
+
+/* USB subsystem interface */
+static struct usb_driver usb_raremono_driver = {
+	.name			= "radio-raremono",
+	.probe			= usb_raremono_probe,
+	.disconnect		= usb_raremono_disconnect,
+	.id_table		= usb_raremono_device_table,
+};
+
+module_usb_driver(usb_raremono_driver);
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
new file mode 100644
index 000000000..289144690
--- /dev/null
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RadioTrack II driver
+ * Copyright 1998 Ben Pfaff
+ *
+ * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
+ * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hverkuil@kernel.org>
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
+ *
+ * Fully tested with actual hardware and the v4l2-compliance tool.
+ */
+
+#include <linux/module.h>	/* Modules			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/delay.h>	/* udelay			*/
+#include <linux/videodev2.h>	/* kernel radio structs		*/
+#include <linux/mutex.h>
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include "radio-isa.h"
+
+MODULE_AUTHOR("Ben Pfaff");
+MODULE_DESCRIPTION("A driver for the RadioTrack II radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.99");
+
+#ifndef CONFIG_RADIO_RTRACK2_PORT
+#define CONFIG_RADIO_RTRACK2_PORT -1
+#endif
+
+#define RTRACK2_MAX 2
+
+static int io[RTRACK2_MAX] = { [0] = CONFIG_RADIO_RTRACK2_PORT,
+			      [1 ... (RTRACK2_MAX - 1)] = -1 };
+static int radio_nr[RTRACK2_MAX] = { [0 ... (RTRACK2_MAX - 1)] = -1 };
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)");
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+static struct radio_isa_card *rtrack2_alloc(void)
+{
+	return kzalloc_obj(struct radio_isa_card);
+}
+
+static void zero(struct radio_isa_card *isa)
+{
+	outb_p(1, isa->io);
+	outb_p(3, isa->io);
+	outb_p(1, isa->io);
+}
+
+static void one(struct radio_isa_card *isa)
+{
+	outb_p(5, isa->io);
+	outb_p(7, isa->io);
+	outb_p(5, isa->io);
+}
+
+static int rtrack2_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	int i;
+
+	freq = freq / 200 + 856;
+
+	outb_p(0xc8, isa->io);
+	outb_p(0xc9, isa->io);
+	outb_p(0xc9, isa->io);
+
+	for (i = 0; i < 10; i++)
+		zero(isa);
+
+	for (i = 14; i >= 0; i--)
+		if (freq & (1 << i))
+			one(isa);
+		else
+			zero(isa);
+
+	outb_p(0xc8, isa->io);
+	outb_p(v4l2_ctrl_g_ctrl(isa->mute), isa->io);
+	return 0;
+}
+
+static u32 rtrack2_g_signal(struct radio_isa_card *isa)
+{
+	/* bit set = no signal present	*/
+	return (inb(isa->io) & 2) ? 0 : 0xffff;
+}
+
+static int rtrack2_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	outb(mute, isa->io);
+	return 0;
+}
+
+static const struct radio_isa_ops rtrack2_ops = {
+	.alloc = rtrack2_alloc,
+	.s_mute_volume = rtrack2_s_mute_volume,
+	.s_frequency = rtrack2_s_frequency,
+	.g_signal = rtrack2_g_signal,
+};
+
+static const int rtrack2_ioports[] = { 0x20f, 0x30f };
+
+static struct radio_isa_driver rtrack2_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-rtrack2",
+		},
+	},
+	.io_params = io,
+	.radio_nr_params = radio_nr,
+	.io_ports = rtrack2_ioports,
+	.num_of_io_ports = ARRAY_SIZE(rtrack2_ioports),
+	.region_size = 4,
+	.card = "AIMSlab RadioTrack II",
+	.ops = &rtrack2_ops,
+	.has_stereo = true,
+};
+
+static int __init rtrack2_init(void)
+{
+	return isa_register_driver(&rtrack2_driver.driver, RTRACK2_MAX);
+}
+
+static void __exit rtrack2_exit(void)
+{
+	isa_unregister_driver(&rtrack2_driver.driver);
+}
+
+module_init(rtrack2_init);
+module_exit(rtrack2_exit);
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
new file mode 100644
index 000000000..1fb88c2b9
--- /dev/null
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* SF16-FMI, SF16-FMP and SF16-FMD radio driver for Linux radio support
+ * heavily based on rtrack driver...
+ * (c) 1997 M. Kirkwood
+ * (c) 1998 Petr Vandrovec, vandrove@vc.cvut.cz
+ *
+ * Fitted to new interface by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * Made working and cleaned up functions <mikael.hedin@irf.se>
+ * Support for ISAPnP by Ladislav Michl <ladis@psi.cz>
+ *
+ * Notes on the hardware
+ *
+ *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
+ *  No volume control - only mute/unmute - you have to use line volume
+ *  control on SB-part of SF16-FMI/SF16-FMP/SF16-FMD
+ *
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
+ */
+
+#include <linux/kernel.h>	/* __setup			*/
+#include <linux/module.h>	/* Modules			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/delay.h>	/* udelay			*/
+#include <linux/isapnp.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>	/* kernel radio structs		*/
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include "lm7000.h"
+
+MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood");
+MODULE_DESCRIPTION("A driver for the SF16-FMI, SF16-FMP and SF16-FMD radio.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
+
+static int io = -1;
+static int radio_nr = -1;
+
+module_param(io, int, 0);
+MODULE_PARM_DESC(io, "I/O address of the SF16-FMI/SF16-FMP/SF16-FMD card (0x284 or 0x384)");
+module_param(radio_nr, int, 0);
+
+struct fmi
+{
+	struct v4l2_device v4l2_dev;
+	struct v4l2_ctrl_handler hdl;
+	struct video_device vdev;
+	int io;
+	bool mute;
+	u32 curfreq; /* freq in kHz */
+	struct mutex lock;
+};
+
+static struct fmi fmi_card;
+static struct pnp_dev *dev;
+static bool pnp_attached;
+
+#define RSF16_MINFREQ (87U * 16000)
+#define RSF16_MAXFREQ (108U * 16000)
+
+#define FMI_BIT_TUN_CE		(1 << 0)
+#define FMI_BIT_TUN_CLK		(1 << 1)
+#define FMI_BIT_TUN_DATA	(1 << 2)
+#define FMI_BIT_VOL_SW		(1 << 3)
+#define FMI_BIT_TUN_STRQ	(1 << 4)
+
+static void fmi_set_pins(void *handle, u8 pins)
+{
+	struct fmi *fmi = handle;
+	u8 bits = FMI_BIT_TUN_STRQ;
+
+	if (!fmi->mute)
+		bits |= FMI_BIT_VOL_SW;
+
+	if (pins & LM7000_DATA)
+		bits |= FMI_BIT_TUN_DATA;
+	if (pins & LM7000_CLK)
+		bits |= FMI_BIT_TUN_CLK;
+	if (pins & LM7000_CE)
+		bits |= FMI_BIT_TUN_CE;
+
+	mutex_lock(&fmi->lock);
+	outb_p(bits, fmi->io);
+	mutex_unlock(&fmi->lock);
+}
+
+static inline void fmi_mute(struct fmi *fmi)
+{
+	mutex_lock(&fmi->lock);
+	outb(0x00, fmi->io);
+	mutex_unlock(&fmi->lock);
+}
+
+static inline void fmi_unmute(struct fmi *fmi)
+{
+	mutex_lock(&fmi->lock);
+	outb(0x08, fmi->io);
+	mutex_unlock(&fmi->lock);
+}
+
+static inline int fmi_getsigstr(struct fmi *fmi)
+{
+	int val;
+	int res;
+
+	mutex_lock(&fmi->lock);
+	val = fmi->mute ? 0x00 : 0x08;	/* mute/unmute */
+	outb(val, fmi->io);
+	outb(val | 0x10, fmi->io);
+	msleep(143);		/* was schedule_timeout(HZ/7) */
+	res = (int)inb(fmi->io + 1);
+	outb(val, fmi->io);
+
+	mutex_unlock(&fmi->lock);
+	return (res & 2) ? 0 : 0xFFFF;
+}
+
+static void fmi_set_freq(struct fmi *fmi)
+{
+	fmi->curfreq = clamp(fmi->curfreq, RSF16_MINFREQ, RSF16_MAXFREQ);
+	/* rounding in steps of 800 to match the freq
+	   that will be used */
+	lm7000_set_freq((fmi->curfreq / 800) * 800, fmi, fmi_set_pins);
+}
+
+static int vidioc_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *v)
+{
+	strscpy(v->driver, "radio-sf16fmi", sizeof(v->driver));
+	strscpy(v->card, "SF16-FMI/FMP/FMD radio", sizeof(v->card));
+	strscpy(v->bus_info, "ISA:radio-sf16fmi", sizeof(v->bus_info));
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+					struct v4l2_tuner *v)
+{
+	struct fmi *fmi = video_drvdata(file);
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->rangelow = RSF16_MINFREQ;
+	v->rangehigh = RSF16_MAXFREQ;
+	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
+	v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
+	v->audmode = V4L2_TUNER_MODE_STEREO;
+	v->signal = fmi_getsigstr(fmi);
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+					const struct v4l2_tuner *v)
+{
+	return v->index ? -EINVAL : 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+					const struct v4l2_frequency *f)
+{
+	struct fmi *fmi = video_drvdata(file);
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	fmi->curfreq = f->frequency;
+	fmi_set_freq(fmi);
+
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+					struct v4l2_frequency *f)
+{
+	struct fmi *fmi = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = fmi->curfreq;
+	return 0;
+}
+
+static int fmi_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct fmi *fmi = container_of(ctrl->handler, struct fmi, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (ctrl->val)
+			fmi_mute(fmi);
+		else
+			fmi_unmute(fmi);
+		fmi->mute = ctrl->val;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops fmi_ctrl_ops = {
+	.s_ctrl = fmi_s_ctrl,
+};
+
+static const struct v4l2_file_operations fmi_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/* ladis: this is my card. does any other types exist? */
+static struct isapnp_device_id id_table[] = {
+		/* SF16-FMI */
+	{	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+		ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad10), 0},
+		/* SF16-FMD */
+	{	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+		ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad12), 0},
+	{	ISAPNP_CARD_END, },
+};
+
+MODULE_DEVICE_TABLE(isapnp, id_table);
+
+static int __init isapnp_fmi_probe(void)
+{
+	int i = 0;
+
+	while (id_table[i].card_vendor != 0 && dev == NULL) {
+		dev = pnp_find_dev(NULL, id_table[i].vendor,
+				   id_table[i].function, NULL);
+		i++;
+	}
+
+	if (!dev)
+		return -ENODEV;
+	if (pnp_device_attach(dev) < 0)
+		return -EAGAIN;
+	if (pnp_activate_dev(dev) < 0) {
+		printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n");
+		pnp_device_detach(dev);
+		return -ENOMEM;
+	}
+	if (!pnp_port_valid(dev, 0)) {
+		pnp_device_detach(dev);
+		return -ENODEV;
+	}
+
+	i = pnp_port_start(dev, 0);
+	printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i);
+
+	return i;
+}
+
+static int __init fmi_init(void)
+{
+	struct fmi *fmi = &fmi_card;
+	struct v4l2_device *v4l2_dev = &fmi->v4l2_dev;
+	struct v4l2_ctrl_handler *hdl = &fmi->hdl;
+	int res, i;
+	static const int probe_ports[] = { 0, 0x284, 0x384 };
+
+	if (io < 0) {
+		for (i = 0; i < ARRAY_SIZE(probe_ports); i++) {
+			io = probe_ports[i];
+			if (io == 0) {
+				io = isapnp_fmi_probe();
+				if (io < 0)
+					continue;
+				pnp_attached = true;
+			}
+			if (!request_region(io, 2, "radio-sf16fmi")) {
+				if (pnp_attached)
+					pnp_device_detach(dev);
+				io = -1;
+				continue;
+			}
+			if (pnp_attached ||
+			    ((inb(io) & 0xf9) == 0xf9 && (inb(io) & 0x4) == 0))
+				break;
+			release_region(io, 2);
+			io = -1;
+		}
+	} else {
+		if (!request_region(io, 2, "radio-sf16fmi")) {
+			printk(KERN_ERR "radio-sf16fmi: port %#x already in use\n", io);
+			return -EBUSY;
+		}
+		if (inb(io) == 0xff) {
+			printk(KERN_ERR "radio-sf16fmi: card not present at %#x\n", io);
+			release_region(io, 2);
+			return -ENODEV;
+		}
+	}
+	if (io < 0) {
+		printk(KERN_ERR "radio-sf16fmi: no cards found\n");
+		return -ENODEV;
+	}
+
+	strscpy(v4l2_dev->name, "sf16fmi", sizeof(v4l2_dev->name));
+	fmi->io = io;
+
+	res = v4l2_device_register(NULL, v4l2_dev);
+	if (res < 0) {
+		release_region(fmi->io, 2);
+		if (pnp_attached)
+			pnp_device_detach(dev);
+		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		return res;
+	}
+
+	v4l2_ctrl_handler_init(hdl, 1);
+	v4l2_ctrl_new_std(hdl, &fmi_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	v4l2_dev->ctrl_handler = hdl;
+	if (hdl->error) {
+		res = hdl->error;
+		v4l2_err(v4l2_dev, "Could not register controls\n");
+		v4l2_ctrl_handler_free(hdl);
+		v4l2_device_unregister(v4l2_dev);
+		return res;
+	}
+
+	strscpy(fmi->vdev.name, v4l2_dev->name, sizeof(fmi->vdev.name));
+	fmi->vdev.v4l2_dev = v4l2_dev;
+	fmi->vdev.fops = &fmi_fops;
+	fmi->vdev.ioctl_ops = &fmi_ioctl_ops;
+	fmi->vdev.release = video_device_release_empty;
+	fmi->vdev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	video_set_drvdata(&fmi->vdev, fmi);
+
+	mutex_init(&fmi->lock);
+
+	/* mute card and set default frequency */
+	fmi->mute = true;
+	fmi->curfreq = RSF16_MINFREQ;
+	fmi_set_freq(fmi);
+
+	if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_ctrl_handler_free(hdl);
+		v4l2_device_unregister(v4l2_dev);
+		release_region(fmi->io, 2);
+		if (pnp_attached)
+			pnp_device_detach(dev);
+		return -EINVAL;
+	}
+
+	v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
+	return 0;
+}
+
+static void __exit fmi_exit(void)
+{
+	struct fmi *fmi = &fmi_card;
+
+	v4l2_ctrl_handler_free(&fmi->hdl);
+	video_unregister_device(&fmi->vdev);
+	v4l2_device_unregister(&fmi->v4l2_dev);
+	release_region(fmi->io, 2);
+	if (dev && pnp_attached)
+		pnp_device_detach(dev);
+}
+
+module_init(fmi_init);
+module_exit(fmi_exit);
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
new file mode 100644
index 000000000..2cc91e576
--- /dev/null
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* SF16-FMR2 and SF16-FMD2 radio driver for Linux
+ * Copyright (c) 2011 Ondrej Zary
+ *
+ * Original driver was (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
+ * but almost nothing remained here after conversion to generic TEA575x
+ * implementation
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>	/* Modules			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/slab.h>
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <linux/isa.h>
+#include <linux/pnp.h>
+#include <media/drv-intf/tea575x.h>
+
+MODULE_AUTHOR("Ondrej Zary");
+MODULE_DESCRIPTION("MediaForte SF16-FMR2 and SF16-FMD2 FM radio card driver");
+MODULE_LICENSE("GPL");
+
+/* these cards can only use two different ports (0x384 and 0x284) */
+#define FMR2_MAX 2
+
+static int radio_nr[FMR2_MAX] = { [0 ... (FMR2_MAX - 1)] = -1 };
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+struct fmr2 {
+	int io;
+	struct v4l2_device v4l2_dev;
+	struct snd_tea575x tea;
+	struct v4l2_ctrl *volume;
+	struct v4l2_ctrl *balance;
+	bool is_fmd2;
+};
+
+static int num_fmr2_cards;
+static struct fmr2 *fmr2_cards[FMR2_MAX];
+static bool isa_registered;
+static bool pnp_registered;
+
+/* the port is hardwired on SF16-FMR2 */
+#define FMR2_PORT	0x384
+
+/* TEA575x tuner pins */
+#define STR_DATA	(1 << 0)
+#define STR_CLK		(1 << 1)
+#define STR_WREN	(1 << 2)
+#define STR_MOST	(1 << 3)
+/* PT2254A/TC9154A volume control pins */
+#define PT_ST		(1 << 4)
+#define PT_CK		(1 << 5)
+#define PT_DATA		(1 << 6)
+/* volume control presence pin */
+#define FMR2_HASVOL	(1 << 7)
+
+static void fmr2_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
+{
+	struct fmr2 *fmr2 = tea->private_data;
+	u8 bits = 0;
+
+	bits |= (pins & TEA575X_DATA) ? STR_DATA : 0;
+	bits |= (pins & TEA575X_CLK)  ? STR_CLK  : 0;
+	/* WRITE_ENABLE is inverted, DATA must be high during read */
+	bits |= (pins & TEA575X_WREN) ? 0 : STR_WREN | STR_DATA;
+
+	outb(bits, fmr2->io);
+}
+
+static u8 fmr2_tea575x_get_pins(struct snd_tea575x *tea)
+{
+	struct fmr2 *fmr2 = tea->private_data;
+	u8 bits = inb(fmr2->io);
+
+	return  ((bits & STR_DATA) ? TEA575X_DATA : 0) |
+		((bits & STR_MOST) ? TEA575X_MOST : 0);
+}
+
+static void fmr2_tea575x_set_direction(struct snd_tea575x *tea, bool output)
+{
+}
+
+static const struct snd_tea575x_ops fmr2_tea_ops = {
+	.set_pins = fmr2_tea575x_set_pins,
+	.get_pins = fmr2_tea575x_get_pins,
+	.set_direction = fmr2_tea575x_set_direction,
+};
+
+/* TC9154A/PT2254A volume control */
+
+/* 18-bit shift register bit definitions */
+#define TC9154A_ATT_MAJ_0DB	(1 << 0)
+#define TC9154A_ATT_MAJ_10DB	(1 << 1)
+#define TC9154A_ATT_MAJ_20DB	(1 << 2)
+#define TC9154A_ATT_MAJ_30DB	(1 << 3)
+#define TC9154A_ATT_MAJ_40DB	(1 << 4)
+#define TC9154A_ATT_MAJ_50DB	(1 << 5)
+#define TC9154A_ATT_MAJ_60DB	(1 << 6)
+
+#define TC9154A_ATT_MIN_0DB	(1 << 7)
+#define TC9154A_ATT_MIN_2DB	(1 << 8)
+#define TC9154A_ATT_MIN_4DB	(1 << 9)
+#define TC9154A_ATT_MIN_6DB	(1 << 10)
+#define TC9154A_ATT_MIN_8DB	(1 << 11)
+/* bit 12 is ignored */
+#define TC9154A_CHANNEL_LEFT	(1 << 13)
+#define TC9154A_CHANNEL_RIGHT	(1 << 14)
+/* bits 15, 16, 17 must be 0 */
+
+#define	TC9154A_ATT_MAJ(x)	(1 << x)
+#define TC9154A_ATT_MIN(x)	(1 << (7 + x))
+
+static void tc9154a_set_pins(struct fmr2 *fmr2, u8 pins)
+{
+	if (!fmr2->tea.mute)
+		pins |= STR_WREN;
+
+	outb(pins, fmr2->io);
+}
+
+static void tc9154a_set_attenuation(struct fmr2 *fmr2, int att, u32 channel)
+{
+	int i;
+	u32 reg;
+	u8 bit;
+
+	reg = TC9154A_ATT_MAJ(att / 10) | TC9154A_ATT_MIN((att % 10) / 2);
+	reg |= channel;
+	/* write 18-bit shift register, LSB first */
+	for (i = 0; i < 18; i++) {
+		bit = reg & (1 << i) ? PT_DATA : 0;
+		tc9154a_set_pins(fmr2, bit);
+		udelay(5);
+		tc9154a_set_pins(fmr2, bit | PT_CK);
+		udelay(5);
+		tc9154a_set_pins(fmr2, bit);
+	}
+
+	/* latch register data */
+	udelay(5);
+	tc9154a_set_pins(fmr2, PT_ST);
+	udelay(5);
+	tc9154a_set_pins(fmr2, 0);
+}
+
+static int fmr2_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct snd_tea575x *tea = container_of(ctrl->handler, struct snd_tea575x, ctrl_handler);
+	struct fmr2 *fmr2 = tea->private_data;
+	int volume, balance, left, right;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_VOLUME:
+		volume = ctrl->val;
+		balance = fmr2->balance->cur.val;
+		break;
+	case V4L2_CID_AUDIO_BALANCE:
+		balance = ctrl->val;
+		volume = fmr2->volume->cur.val;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	left = right = volume;
+	if (balance < 0)
+		right = max(0, right + balance);
+	if (balance > 0)
+		left = max(0, left - balance);
+
+	tc9154a_set_attenuation(fmr2, abs(left - 68), TC9154A_CHANNEL_LEFT);
+	tc9154a_set_attenuation(fmr2, abs(right - 68), TC9154A_CHANNEL_RIGHT);
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops fmr2_ctrl_ops = {
+	.s_ctrl = fmr2_s_ctrl,
+};
+
+static int fmr2_tea_ext_init(struct snd_tea575x *tea)
+{
+	struct fmr2 *fmr2 = tea->private_data;
+
+	/* FMR2 can have volume control, FMD2 can't (uses SB16 mixer) */
+	if (!fmr2->is_fmd2 && inb(fmr2->io) & FMR2_HASVOL) {
+		fmr2->volume = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_VOLUME, 0, 68, 2, 56);
+		fmr2->balance = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_BALANCE, -68, 68, 2, 0);
+		if (tea->ctrl_handler.error) {
+			printk(KERN_ERR "radio-sf16fmr2: can't initialize controls\n");
+			return tea->ctrl_handler.error;
+		}
+	}
+
+	return 0;
+}
+
+static const struct pnp_device_id fmr2_pnp_ids[] = {
+	{ .id = "MFRad13" }, /* tuner subdevice of SF16-FMD2 */
+	{ .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, fmr2_pnp_ids);
+
+static int fmr2_probe(struct fmr2 *fmr2, struct device *pdev, int io)
+{
+	int err, i;
+	char *card_name = fmr2->is_fmd2 ? "SF16-FMD2" : "SF16-FMR2";
+
+	/* avoid errors if a card was already registered at given port */
+	for (i = 0; i < num_fmr2_cards; i++)
+		if (io == fmr2_cards[i]->io)
+			return -EBUSY;
+
+	strscpy(fmr2->v4l2_dev.name, "radio-sf16fmr2",
+		sizeof(fmr2->v4l2_dev.name));
+	fmr2->io = io;
+
+	if (!request_region(fmr2->io, 2, fmr2->v4l2_dev.name)) {
+		printk(KERN_ERR "radio-sf16fmr2: I/O port 0x%x already in use\n", fmr2->io);
+		return -EBUSY;
+	}
+
+	dev_set_drvdata(pdev, fmr2);
+	err = v4l2_device_register(pdev, &fmr2->v4l2_dev);
+	if (err < 0) {
+		v4l2_err(&fmr2->v4l2_dev, "Could not register v4l2_device\n");
+		release_region(fmr2->io, 2);
+		return err;
+	}
+	fmr2->tea.v4l2_dev = &fmr2->v4l2_dev;
+	fmr2->tea.private_data = fmr2;
+	fmr2->tea.radio_nr = radio_nr[num_fmr2_cards];
+	fmr2->tea.ops = &fmr2_tea_ops;
+	fmr2->tea.ext_init = fmr2_tea_ext_init;
+	strscpy(fmr2->tea.card, card_name, sizeof(fmr2->tea.card));
+	snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "%s:%s",
+			fmr2->is_fmd2 ? "PnP" : "ISA", dev_name(pdev));
+
+	if (snd_tea575x_init(&fmr2->tea, THIS_MODULE)) {
+		printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
+		release_region(fmr2->io, 2);
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "radio-sf16fmr2: %s radio card at 0x%x.\n",
+			card_name, fmr2->io);
+	return 0;
+}
+
+static int fmr2_isa_match(struct device *pdev, unsigned int ndev)
+{
+	struct fmr2 *fmr2 = kzalloc_obj(*fmr2);
+	if (!fmr2)
+		return 0;
+
+	if (fmr2_probe(fmr2, pdev, FMR2_PORT)) {
+		kfree(fmr2);
+		return 0;
+	}
+	dev_set_drvdata(pdev, fmr2);
+	fmr2_cards[num_fmr2_cards++] = fmr2;
+
+	return 1;
+}
+
+static int fmr2_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id)
+{
+	int ret;
+	struct fmr2 *fmr2 = kzalloc_obj(*fmr2);
+	if (!fmr2)
+		return -ENOMEM;
+
+	fmr2->is_fmd2 = true;
+	ret = fmr2_probe(fmr2, &pdev->dev, pnp_port_start(pdev, 0));
+	if (ret) {
+		kfree(fmr2);
+		return ret;
+	}
+	pnp_set_drvdata(pdev, fmr2);
+	fmr2_cards[num_fmr2_cards++] = fmr2;
+
+	return 0;
+}
+
+static void fmr2_remove(struct fmr2 *fmr2)
+{
+	snd_tea575x_exit(&fmr2->tea);
+	release_region(fmr2->io, 2);
+	v4l2_device_unregister(&fmr2->v4l2_dev);
+	kfree(fmr2);
+}
+
+static void fmr2_isa_remove(struct device *pdev, unsigned int ndev)
+{
+	fmr2_remove(dev_get_drvdata(pdev));
+}
+
+static void fmr2_pnp_remove(struct pnp_dev *pdev)
+{
+	fmr2_remove(pnp_get_drvdata(pdev));
+	pnp_set_drvdata(pdev, NULL);
+}
+
+static struct isa_driver fmr2_isa_driver = {
+	.match		= fmr2_isa_match,
+	.remove		= fmr2_isa_remove,
+	.driver		= {
+		.name	= "radio-sf16fmr2",
+	},
+};
+
+static struct pnp_driver fmr2_pnp_driver = {
+	.name		= "radio-sf16fmr2",
+	.id_table	= fmr2_pnp_ids,
+	.probe		= fmr2_pnp_probe,
+	.remove		= fmr2_pnp_remove,
+};
+
+static int __init fmr2_init(void)
+{
+	int ret;
+
+	ret = pnp_register_driver(&fmr2_pnp_driver);
+	if (!ret)
+		pnp_registered = true;
+	ret = isa_register_driver(&fmr2_isa_driver, 1);
+	if (!ret)
+		isa_registered = true;
+
+	return (pnp_registered || isa_registered) ? 0 : ret;
+}
+
+static void __exit fmr2_exit(void)
+{
+	if (pnp_registered)
+		pnp_unregister_driver(&fmr2_pnp_driver);
+	if (isa_registered)
+		isa_unregister_driver(&fmr2_isa_driver);
+}
+
+module_init(fmr2_init);
+module_exit(fmr2_exit);
diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c
new file mode 100644
index 000000000..c1f356c5f
--- /dev/null
+++ b/drivers/media/radio/radio-shark.c
@@ -0,0 +1,429 @@
+/*
+ * Linux V4L2 radio driver for the Griffin radioSHARK USB radio receiver
+ *
+ * Note the radioSHARK offers the audio through a regular USB audio device,
+ * this driver only handles the tuning.
+ *
+ * The info necessary to drive the shark was taken from the small userspace
+ * shark.c program by Michael Rolig, which he kindly placed in the Public
+ * Domain.
+ *
+ * Copyright (c) 2012 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-device.h>
+#include <media/drv-intf/tea575x.h>
+
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_RADIO_SHARK_MODULE))
+#define SHARK_USE_LEDS 1
+#endif
+
+/*
+ * Version Information
+ */
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Griffin radioSHARK, USB radio receiver driver");
+MODULE_LICENSE("GPL");
+
+#define SHARK_IN_EP		0x83
+#define SHARK_OUT_EP		0x05
+
+#define TEA575X_BIT_MONO	(1<<22)		/* 0 = stereo, 1 = mono */
+#define TEA575X_BIT_BAND_MASK	(3<<20)
+#define TEA575X_BIT_BAND_FM	(0<<20)
+
+#define TB_LEN 6
+#define DRV_NAME "radioshark"
+
+#define v4l2_dev_to_shark(d) container_of(d, struct shark_device, v4l2_dev)
+
+/* Note BLUE_IS_PULSE comes after NO_LEDS as it is a status bit, not a LED */
+enum { BLUE_LED, BLUE_PULSE_LED, RED_LED, NO_LEDS, BLUE_IS_PULSE };
+
+struct shark_device {
+	struct usb_device *usbdev;
+	struct v4l2_device v4l2_dev;
+	struct snd_tea575x tea;
+
+#ifdef SHARK_USE_LEDS
+	struct work_struct led_work;
+	struct led_classdev leds[NO_LEDS];
+	char led_names[NO_LEDS][32];
+	atomic_t brightness[NO_LEDS];
+	unsigned long brightness_new;
+#endif
+
+	u8 *transfer_buffer;
+	u32 last_val;
+};
+
+static atomic_t shark_instance = ATOMIC_INIT(0);
+
+static void shark_write_val(struct snd_tea575x *tea, u32 val)
+{
+	struct shark_device *shark = tea->private_data;
+	int i, res, actual_len;
+
+	/* Avoid unnecessary (slow) USB transfers */
+	if (shark->last_val == val)
+		return;
+
+	memset(shark->transfer_buffer, 0, TB_LEN);
+	shark->transfer_buffer[0] = 0xc0; /* Write shift register command */
+	for (i = 0; i < 4; i++)
+		shark->transfer_buffer[i] |= (val >> (24 - i * 8)) & 0xff;
+
+	res = usb_interrupt_msg(shark->usbdev,
+				usb_sndintpipe(shark->usbdev, SHARK_OUT_EP),
+				shark->transfer_buffer, TB_LEN,
+				&actual_len, 1000);
+	if (res >= 0)
+		shark->last_val = val;
+	else
+		v4l2_err(&shark->v4l2_dev, "set-freq error: %d\n", res);
+}
+
+static u32 shark_read_val(struct snd_tea575x *tea)
+{
+	struct shark_device *shark = tea->private_data;
+	int i, res, actual_len;
+	u32 val = 0;
+
+	memset(shark->transfer_buffer, 0, TB_LEN);
+	shark->transfer_buffer[0] = 0x80;
+	res = usb_interrupt_msg(shark->usbdev,
+				usb_sndintpipe(shark->usbdev, SHARK_OUT_EP),
+				shark->transfer_buffer, TB_LEN,
+				&actual_len, 1000);
+	if (res < 0) {
+		v4l2_err(&shark->v4l2_dev, "request-status error: %d\n", res);
+		return shark->last_val;
+	}
+
+	res = usb_interrupt_msg(shark->usbdev,
+				usb_rcvintpipe(shark->usbdev, SHARK_IN_EP),
+				shark->transfer_buffer, TB_LEN,
+				&actual_len, 1000);
+	if (res < 0) {
+		v4l2_err(&shark->v4l2_dev, "get-status error: %d\n", res);
+		return shark->last_val;
+	}
+
+	for (i = 0; i < 4; i++)
+		val |= shark->transfer_buffer[i] << (24 - i * 8);
+
+	shark->last_val = val;
+
+	/*
+	 * The shark does not allow actually reading the stereo / mono pin :(
+	 * So assume that when we're tuned to an FM station and mono has not
+	 * been requested, that we're receiving stereo.
+	 */
+	if (((val & TEA575X_BIT_BAND_MASK) == TEA575X_BIT_BAND_FM) &&
+	    !(val & TEA575X_BIT_MONO))
+		shark->tea.stereo = true;
+	else
+		shark->tea.stereo = false;
+
+	return val;
+}
+
+static const struct snd_tea575x_ops shark_tea_ops = {
+	.write_val = shark_write_val,
+	.read_val  = shark_read_val,
+};
+
+#ifdef SHARK_USE_LEDS
+static void shark_led_work(struct work_struct *work)
+{
+	struct shark_device *shark =
+		container_of(work, struct shark_device, led_work);
+	int i, res, brightness, actual_len;
+
+	for (i = 0; i < 3; i++) {
+		if (!test_and_clear_bit(i, &shark->brightness_new))
+			continue;
+
+		brightness = atomic_read(&shark->brightness[i]);
+		memset(shark->transfer_buffer, 0, TB_LEN);
+		if (i != RED_LED) {
+			shark->transfer_buffer[0] = 0xA0 + i;
+			shark->transfer_buffer[1] = brightness;
+		} else
+			shark->transfer_buffer[0] = brightness ? 0xA9 : 0xA8;
+		res = usb_interrupt_msg(shark->usbdev,
+					usb_sndintpipe(shark->usbdev, 0x05),
+					shark->transfer_buffer, TB_LEN,
+					&actual_len, 1000);
+		if (res < 0)
+			v4l2_err(&shark->v4l2_dev, "set LED %s error: %d\n",
+				 shark->led_names[i], res);
+	}
+}
+
+static void shark_led_set_blue(struct led_classdev *led_cdev,
+			       enum led_brightness value)
+{
+	struct shark_device *shark =
+		container_of(led_cdev, struct shark_device, leds[BLUE_LED]);
+
+	atomic_set(&shark->brightness[BLUE_LED], value);
+	set_bit(BLUE_LED, &shark->brightness_new);
+	clear_bit(BLUE_IS_PULSE, &shark->brightness_new);
+	schedule_work(&shark->led_work);
+}
+
+static void shark_led_set_blue_pulse(struct led_classdev *led_cdev,
+				     enum led_brightness value)
+{
+	struct shark_device *shark = container_of(led_cdev,
+				struct shark_device, leds[BLUE_PULSE_LED]);
+
+	atomic_set(&shark->brightness[BLUE_PULSE_LED], 256 - value);
+	set_bit(BLUE_PULSE_LED, &shark->brightness_new);
+	set_bit(BLUE_IS_PULSE, &shark->brightness_new);
+	schedule_work(&shark->led_work);
+}
+
+static void shark_led_set_red(struct led_classdev *led_cdev,
+			      enum led_brightness value)
+{
+	struct shark_device *shark =
+		container_of(led_cdev, struct shark_device, leds[RED_LED]);
+
+	atomic_set(&shark->brightness[RED_LED], value);
+	set_bit(RED_LED, &shark->brightness_new);
+	schedule_work(&shark->led_work);
+}
+
+static const struct led_classdev shark_led_templates[NO_LEDS] = {
+	[BLUE_LED] = {
+		.name		= "%s:blue:",
+		.brightness	= LED_OFF,
+		.max_brightness = 127,
+		.brightness_set = shark_led_set_blue,
+	},
+	[BLUE_PULSE_LED] = {
+		.name		= "%s:blue-pulse:",
+		.brightness	= LED_OFF,
+		.max_brightness = 255,
+		.brightness_set = shark_led_set_blue_pulse,
+	},
+	[RED_LED] = {
+		.name		= "%s:red:",
+		.brightness	= LED_OFF,
+		.max_brightness = 1,
+		.brightness_set = shark_led_set_red,
+	},
+};
+
+static int shark_register_leds(struct shark_device *shark, struct device *dev)
+{
+	int i, retval;
+
+	atomic_set(&shark->brightness[BLUE_LED], 127);
+	INIT_WORK(&shark->led_work, shark_led_work);
+	for (i = 0; i < NO_LEDS; i++) {
+		shark->leds[i] = shark_led_templates[i];
+		snprintf(shark->led_names[i], sizeof(shark->led_names[0]),
+			 shark->leds[i].name, shark->v4l2_dev.name);
+		shark->leds[i].name = shark->led_names[i];
+		retval = led_classdev_register(dev, &shark->leds[i]);
+		if (retval) {
+			v4l2_err(&shark->v4l2_dev,
+				 "couldn't register led: %s\n",
+				 shark->led_names[i]);
+			return retval;
+		}
+	}
+	return 0;
+}
+
+static void shark_unregister_leds(struct shark_device *shark)
+{
+	int i;
+
+	for (i = 0; i < NO_LEDS; i++)
+		led_classdev_unregister(&shark->leds[i]);
+
+	cancel_work_sync(&shark->led_work);
+}
+
+static inline void shark_resume_leds(struct shark_device *shark)
+{
+	if (test_bit(BLUE_IS_PULSE, &shark->brightness_new))
+		set_bit(BLUE_PULSE_LED, &shark->brightness_new);
+	else
+		set_bit(BLUE_LED, &shark->brightness_new);
+	set_bit(RED_LED, &shark->brightness_new);
+	schedule_work(&shark->led_work);
+}
+#else
+static int shark_register_leds(struct shark_device *shark, struct device *dev)
+{
+	v4l2_warn(&shark->v4l2_dev,
+		  "CONFIG_LEDS_CLASS not enabled, LED support disabled\n");
+	return 0;
+}
+static inline void shark_unregister_leds(struct shark_device *shark) { }
+static inline void shark_resume_leds(struct shark_device *shark) { }
+#endif
+
+static void usb_shark_disconnect(struct usb_interface *intf)
+{
+	struct v4l2_device *v4l2_dev = usb_get_intfdata(intf);
+	struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev);
+
+	mutex_lock(&shark->tea.mutex);
+	v4l2_device_disconnect(&shark->v4l2_dev);
+	snd_tea575x_exit(&shark->tea);
+	mutex_unlock(&shark->tea.mutex);
+
+	shark_unregister_leds(shark);
+
+	v4l2_device_put(&shark->v4l2_dev);
+}
+
+static void usb_shark_release(struct v4l2_device *v4l2_dev)
+{
+	struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev);
+
+	v4l2_device_unregister(&shark->v4l2_dev);
+	kfree(shark->transfer_buffer);
+	kfree(shark);
+}
+
+static int usb_shark_probe(struct usb_interface *intf,
+			   const struct usb_device_id *id)
+{
+	struct shark_device *shark;
+	int retval = -ENOMEM;
+	static const u8 ep_addresses[] = {
+		SHARK_IN_EP | USB_DIR_IN,
+		SHARK_OUT_EP | USB_DIR_OUT,
+		0};
+
+	/* Are the expected endpoints present? */
+	if (!usb_check_int_endpoints(intf, ep_addresses)) {
+		dev_err(&intf->dev, "Invalid radioSHARK device\n");
+		return -EINVAL;
+	}
+
+	shark = kzalloc_obj(struct shark_device);
+	if (!shark)
+		return retval;
+
+	shark->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL);
+	if (!shark->transfer_buffer)
+		goto err_alloc_buffer;
+
+	v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance);
+
+	retval = shark_register_leds(shark, &intf->dev);
+	if (retval)
+		goto err_reg_leds;
+
+	shark->v4l2_dev.release = usb_shark_release;
+	retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev);
+	if (retval) {
+		v4l2_err(&shark->v4l2_dev, "couldn't register v4l2_device\n");
+		goto err_reg_dev;
+	}
+
+	shark->usbdev = interface_to_usbdev(intf);
+	shark->tea.v4l2_dev = &shark->v4l2_dev;
+	shark->tea.private_data = shark;
+	shark->tea.radio_nr = -1;
+	shark->tea.ops = &shark_tea_ops;
+	shark->tea.cannot_mute = true;
+	shark->tea.has_am = true;
+	strscpy(shark->tea.card, "Griffin radioSHARK",
+		sizeof(shark->tea.card));
+	usb_make_path(shark->usbdev, shark->tea.bus_info,
+		sizeof(shark->tea.bus_info));
+
+	retval = snd_tea575x_init(&shark->tea, THIS_MODULE);
+	if (retval) {
+		v4l2_err(&shark->v4l2_dev, "couldn't init tea5757\n");
+		goto err_init_tea;
+	}
+
+	return 0;
+
+err_init_tea:
+	v4l2_device_unregister(&shark->v4l2_dev);
+err_reg_dev:
+	shark_unregister_leds(shark);
+err_reg_leds:
+	kfree(shark->transfer_buffer);
+err_alloc_buffer:
+	kfree(shark);
+
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int usb_shark_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	return 0;
+}
+
+static int usb_shark_resume(struct usb_interface *intf)
+{
+	struct v4l2_device *v4l2_dev = usb_get_intfdata(intf);
+	struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev);
+
+	mutex_lock(&shark->tea.mutex);
+	snd_tea575x_set_freq(&shark->tea);
+	mutex_unlock(&shark->tea.mutex);
+
+	shark_resume_leds(shark);
+
+	return 0;
+}
+#endif
+
+/* Specify the bcdDevice value, as the radioSHARK and radioSHARK2 share ids */
+static const struct usb_device_id usb_shark_device_table[] = {
+	{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION |
+			 USB_DEVICE_ID_MATCH_INT_CLASS,
+	  .idVendor     = 0x077d,
+	  .idProduct    = 0x627a,
+	  .bcdDevice_lo = 0x0001,
+	  .bcdDevice_hi = 0x0001,
+	  .bInterfaceClass = 3,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, usb_shark_device_table);
+
+static struct usb_driver usb_shark_driver = {
+	.name			= DRV_NAME,
+	.probe			= usb_shark_probe,
+	.disconnect		= usb_shark_disconnect,
+	.id_table		= usb_shark_device_table,
+#ifdef CONFIG_PM
+	.suspend		= usb_shark_suspend,
+	.resume			= usb_shark_resume,
+	.reset_resume		= usb_shark_resume,
+#endif
+};
+module_usb_driver(usb_shark_driver);
diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c
new file mode 100644
index 000000000..7cc173e21
--- /dev/null
+++ b/drivers/media/radio/radio-shark2.c
@@ -0,0 +1,395 @@
+/*
+ * Linux V4L2 radio driver for the Griffin radioSHARK2 USB radio receiver
+ *
+ * Note the radioSHARK2 offers the audio through a regular USB audio device,
+ * this driver only handles the tuning.
+ *
+ * The info necessary to drive the shark2 was taken from the small userspace
+ * shark2.c program by Hisaaki Shibata, which he kindly placed in the Public
+ * Domain.
+ *
+ * Copyright (c) 2012 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-device.h>
+#include "radio-tea5777.h"
+
+#if defined(CONFIG_LEDS_CLASS) || \
+    (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_RADIO_SHARK2_MODULE))
+#define SHARK_USE_LEDS 1
+#endif
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Griffin radioSHARK2, USB radio receiver driver");
+MODULE_LICENSE("GPL");
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+#define SHARK_IN_EP		0x83
+#define SHARK_OUT_EP		0x05
+
+#define TB_LEN 7
+#define DRV_NAME "radioshark2"
+
+#define v4l2_dev_to_shark(d) container_of(d, struct shark_device, v4l2_dev)
+
+enum { BLUE_LED, RED_LED, NO_LEDS };
+
+struct shark_device {
+	struct usb_device *usbdev;
+	struct v4l2_device v4l2_dev;
+	struct radio_tea5777 tea;
+
+#ifdef SHARK_USE_LEDS
+	struct work_struct led_work;
+	struct led_classdev leds[NO_LEDS];
+	char led_names[NO_LEDS][64];
+	atomic_t brightness[NO_LEDS];
+	unsigned long brightness_new;
+#endif
+
+	u8 *transfer_buffer;
+};
+
+static atomic_t shark_instance = ATOMIC_INIT(0);
+
+static int shark_write_reg(struct radio_tea5777 *tea, u64 reg)
+{
+	struct shark_device *shark = tea->private_data;
+	int i, res, actual_len;
+
+	memset(shark->transfer_buffer, 0, TB_LEN);
+	shark->transfer_buffer[0] = 0x81; /* Write register command */
+	for (i = 0; i < 6; i++)
+		shark->transfer_buffer[i + 1] = (reg >> (40 - i * 8)) & 0xff;
+
+	v4l2_dbg(1, debug, tea->v4l2_dev, "shark2-write: %*ph\n",
+		 7, shark->transfer_buffer);
+
+	res = usb_interrupt_msg(shark->usbdev,
+				usb_sndintpipe(shark->usbdev, SHARK_OUT_EP),
+				shark->transfer_buffer, TB_LEN,
+				&actual_len, 1000);
+	if (res < 0) {
+		v4l2_err(tea->v4l2_dev, "write error: %d\n", res);
+		return res;
+	}
+
+	return 0;
+}
+
+static int shark_read_reg(struct radio_tea5777 *tea, u32 *reg_ret)
+{
+	struct shark_device *shark = tea->private_data;
+	int i, res, actual_len;
+	u32 reg = 0;
+
+	memset(shark->transfer_buffer, 0, TB_LEN);
+	shark->transfer_buffer[0] = 0x82;
+	res = usb_interrupt_msg(shark->usbdev,
+				usb_sndintpipe(shark->usbdev, SHARK_OUT_EP),
+				shark->transfer_buffer, TB_LEN,
+				&actual_len, 1000);
+	if (res < 0) {
+		v4l2_err(tea->v4l2_dev, "request-read error: %d\n", res);
+		return res;
+	}
+
+	res = usb_interrupt_msg(shark->usbdev,
+				usb_rcvintpipe(shark->usbdev, SHARK_IN_EP),
+				shark->transfer_buffer, TB_LEN,
+				&actual_len, 1000);
+	if (res < 0) {
+		v4l2_err(tea->v4l2_dev, "read error: %d\n", res);
+		return res;
+	}
+
+	for (i = 0; i < 3; i++)
+		reg |= shark->transfer_buffer[i] << (16 - i * 8);
+
+	v4l2_dbg(1, debug, tea->v4l2_dev, "shark2-read: %*ph\n",
+		 3, shark->transfer_buffer);
+
+	*reg_ret = reg;
+	return 0;
+}
+
+static const struct radio_tea5777_ops shark_tea_ops = {
+	.write_reg = shark_write_reg,
+	.read_reg  = shark_read_reg,
+};
+
+#ifdef SHARK_USE_LEDS
+static void shark_led_work(struct work_struct *work)
+{
+	struct shark_device *shark =
+		container_of(work, struct shark_device, led_work);
+	int i, res, brightness, actual_len;
+
+	for (i = 0; i < 2; i++) {
+		if (!test_and_clear_bit(i, &shark->brightness_new))
+			continue;
+
+		brightness = atomic_read(&shark->brightness[i]);
+		memset(shark->transfer_buffer, 0, TB_LEN);
+		shark->transfer_buffer[0] = 0x83 + i;
+		shark->transfer_buffer[1] = brightness;
+		res = usb_interrupt_msg(shark->usbdev,
+					usb_sndintpipe(shark->usbdev,
+						       SHARK_OUT_EP),
+					shark->transfer_buffer, TB_LEN,
+					&actual_len, 1000);
+		if (res < 0)
+			v4l2_err(&shark->v4l2_dev, "set LED %s error: %d\n",
+				 shark->led_names[i], res);
+	}
+}
+
+static void shark_led_set_blue(struct led_classdev *led_cdev,
+			       enum led_brightness value)
+{
+	struct shark_device *shark =
+		container_of(led_cdev, struct shark_device, leds[BLUE_LED]);
+
+	atomic_set(&shark->brightness[BLUE_LED], value);
+	set_bit(BLUE_LED, &shark->brightness_new);
+	schedule_work(&shark->led_work);
+}
+
+static void shark_led_set_red(struct led_classdev *led_cdev,
+			      enum led_brightness value)
+{
+	struct shark_device *shark =
+		container_of(led_cdev, struct shark_device, leds[RED_LED]);
+
+	atomic_set(&shark->brightness[RED_LED], value);
+	set_bit(RED_LED, &shark->brightness_new);
+	schedule_work(&shark->led_work);
+}
+
+static const struct led_classdev shark_led_templates[NO_LEDS] = {
+	[BLUE_LED] = {
+		.name		= "%s:blue:",
+		.brightness	= LED_OFF,
+		.max_brightness = 127,
+		.brightness_set = shark_led_set_blue,
+	},
+	[RED_LED] = {
+		.name		= "%s:red:",
+		.brightness	= LED_OFF,
+		.max_brightness = 1,
+		.brightness_set = shark_led_set_red,
+	},
+};
+
+static int shark_register_leds(struct shark_device *shark, struct device *dev)
+{
+	int i, retval;
+
+	atomic_set(&shark->brightness[BLUE_LED], 127);
+	INIT_WORK(&shark->led_work, shark_led_work);
+	for (i = 0; i < NO_LEDS; i++) {
+		shark->leds[i] = shark_led_templates[i];
+		snprintf(shark->led_names[i], sizeof(shark->led_names[0]),
+			 shark->leds[i].name, shark->v4l2_dev.name);
+		shark->leds[i].name = shark->led_names[i];
+		retval = led_classdev_register(dev, &shark->leds[i]);
+		if (retval) {
+			v4l2_err(&shark->v4l2_dev,
+				 "couldn't register led: %s\n",
+				 shark->led_names[i]);
+			return retval;
+		}
+	}
+	return 0;
+}
+
+static void shark_unregister_leds(struct shark_device *shark)
+{
+	int i;
+
+	for (i = 0; i < NO_LEDS; i++)
+		led_classdev_unregister(&shark->leds[i]);
+
+	cancel_work_sync(&shark->led_work);
+}
+
+static inline void shark_resume_leds(struct shark_device *shark)
+{
+	int i;
+
+	for (i = 0; i < NO_LEDS; i++)
+		set_bit(i, &shark->brightness_new);
+
+	schedule_work(&shark->led_work);
+}
+#else
+static int shark_register_leds(struct shark_device *shark, struct device *dev)
+{
+	v4l2_warn(&shark->v4l2_dev,
+		  "CONFIG_LEDS_CLASS not enabled, LED support disabled\n");
+	return 0;
+}
+static inline void shark_unregister_leds(struct shark_device *shark) { }
+static inline void shark_resume_leds(struct shark_device *shark) { }
+#endif
+
+static void usb_shark_disconnect(struct usb_interface *intf)
+{
+	struct v4l2_device *v4l2_dev = usb_get_intfdata(intf);
+	struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev);
+
+	mutex_lock(&shark->tea.mutex);
+	v4l2_device_disconnect(&shark->v4l2_dev);
+	radio_tea5777_exit(&shark->tea);
+	mutex_unlock(&shark->tea.mutex);
+
+	shark_unregister_leds(shark);
+
+	v4l2_device_put(&shark->v4l2_dev);
+}
+
+static void usb_shark_release(struct v4l2_device *v4l2_dev)
+{
+	struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev);
+
+	v4l2_device_unregister(&shark->v4l2_dev);
+	kfree(shark->transfer_buffer);
+	kfree(shark);
+}
+
+static int usb_shark_probe(struct usb_interface *intf,
+			   const struct usb_device_id *id)
+{
+	struct shark_device *shark;
+	int retval = -ENOMEM;
+	static const u8 ep_addresses[] = {
+		SHARK_IN_EP | USB_DIR_IN,
+		SHARK_OUT_EP | USB_DIR_OUT,
+		0};
+
+	/* Are the expected endpoints present? */
+	if (!usb_check_int_endpoints(intf, ep_addresses)) {
+		dev_err(&intf->dev, "Invalid radioSHARK2 device\n");
+		return -EINVAL;
+	}
+
+	shark = kzalloc_obj(struct shark_device);
+	if (!shark)
+		return retval;
+
+	shark->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL);
+	if (!shark->transfer_buffer)
+		goto err_alloc_buffer;
+
+	v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance);
+
+	retval = shark_register_leds(shark, &intf->dev);
+	if (retval)
+		goto err_reg_leds;
+
+	shark->v4l2_dev.release = usb_shark_release;
+	retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev);
+	if (retval) {
+		v4l2_err(&shark->v4l2_dev, "couldn't register v4l2_device\n");
+		goto err_reg_dev;
+	}
+
+	shark->usbdev = interface_to_usbdev(intf);
+	shark->tea.v4l2_dev = &shark->v4l2_dev;
+	shark->tea.private_data = shark;
+	shark->tea.ops = &shark_tea_ops;
+	shark->tea.has_am = true;
+	shark->tea.write_before_read = true;
+	strscpy(shark->tea.card, "Griffin radioSHARK2",
+		sizeof(shark->tea.card));
+	usb_make_path(shark->usbdev, shark->tea.bus_info,
+		sizeof(shark->tea.bus_info));
+
+	retval = radio_tea5777_init(&shark->tea, THIS_MODULE);
+	if (retval) {
+		v4l2_err(&shark->v4l2_dev, "couldn't init tea5777\n");
+		goto err_init_tea;
+	}
+
+	return 0;
+
+err_init_tea:
+	v4l2_device_unregister(&shark->v4l2_dev);
+err_reg_dev:
+	shark_unregister_leds(shark);
+err_reg_leds:
+	kfree(shark->transfer_buffer);
+err_alloc_buffer:
+	kfree(shark);
+
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int usb_shark_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	return 0;
+}
+
+static int usb_shark_resume(struct usb_interface *intf)
+{
+	struct v4l2_device *v4l2_dev = usb_get_intfdata(intf);
+	struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev);
+	int ret;
+
+	mutex_lock(&shark->tea.mutex);
+	ret = radio_tea5777_set_freq(&shark->tea);
+	mutex_unlock(&shark->tea.mutex);
+
+	shark_resume_leds(shark);
+
+	return ret;
+}
+#endif
+
+/* Specify the bcdDevice value, as the radioSHARK and radioSHARK2 share ids */
+static const struct usb_device_id usb_shark_device_table[] = {
+	{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION |
+			 USB_DEVICE_ID_MATCH_INT_CLASS,
+	  .idVendor     = 0x077d,
+	  .idProduct    = 0x627a,
+	  .bcdDevice_lo = 0x0010,
+	  .bcdDevice_hi = 0x0010,
+	  .bInterfaceClass = 3,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, usb_shark_device_table);
+
+static struct usb_driver usb_shark_driver = {
+	.name			= DRV_NAME,
+	.probe			= usb_shark_probe,
+	.disconnect		= usb_shark_disconnect,
+	.id_table		= usb_shark_device_table,
+#ifdef CONFIG_PM
+	.suspend		= usb_shark_suspend,
+	.resume			= usb_shark_resume,
+	.reset_resume		= usb_shark_resume,
+#endif
+};
+module_usb_driver(usb_shark_driver);
diff --git a/drivers/media/radio/radio-si476x.c b/drivers/media/radio/radio-si476x.c
new file mode 100644
index 000000000..bfe89782d
--- /dev/null
+++ b/drivers/media/radio/radio-si476x.c
@@ -0,0 +1,1523 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/media/radio/radio-si476x.c -- V4L2 driver for SI476X chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/atomic.h>
+#include <linux/videodev2.h>
+#include <linux/mutex.h>
+#include <linux/debugfs.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-device.h>
+
+#include <media/drv-intf/si476x.h>
+#include <linux/mfd/si476x-core.h>
+
+#define FM_FREQ_RANGE_LOW   64000000
+#define FM_FREQ_RANGE_HIGH 108000000
+
+#define AM_FREQ_RANGE_LOW    520000
+#define AM_FREQ_RANGE_HIGH 30000000
+
+#define PWRLINEFLTR (1 << 8)
+
+#define FREQ_MUL (10000000 / 625)
+
+#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0x80 & (status))
+
+#define DRIVER_NAME "si476x-radio"
+#define DRIVER_CARD "SI476x AM/FM Receiver"
+
+enum si476x_freq_bands {
+	SI476X_BAND_FM,
+	SI476X_BAND_AM,
+};
+
+static const struct v4l2_frequency_band si476x_bands[] = {
+	[SI476X_BAND_FM] = {
+		.type		= V4L2_TUNER_RADIO,
+		.index		= SI476X_BAND_FM,
+		.capability	= V4L2_TUNER_CAP_LOW
+		| V4L2_TUNER_CAP_STEREO
+		| V4L2_TUNER_CAP_RDS
+		| V4L2_TUNER_CAP_RDS_BLOCK_IO
+		| V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow	=  64 * FREQ_MUL,
+		.rangehigh	= 108 * FREQ_MUL,
+		.modulation	= V4L2_BAND_MODULATION_FM,
+	},
+	[SI476X_BAND_AM] = {
+		.type		= V4L2_TUNER_RADIO,
+		.index		= SI476X_BAND_AM,
+		.capability	= V4L2_TUNER_CAP_LOW
+		| V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow	= 0.52 * FREQ_MUL,
+		.rangehigh	= 30 * FREQ_MUL,
+		.modulation	= V4L2_BAND_MODULATION_AM,
+	},
+};
+
+static inline bool si476x_radio_freq_is_inside_of_the_band(u32 freq, int band)
+{
+	return freq >= si476x_bands[band].rangelow &&
+		freq <= si476x_bands[band].rangehigh;
+}
+
+static inline bool si476x_radio_range_is_inside_of_the_band(u32 low, u32 high,
+							    int band)
+{
+	return low  >= si476x_bands[band].rangelow &&
+		high <= si476x_bands[band].rangehigh;
+}
+
+static int si476x_radio_s_ctrl(struct v4l2_ctrl *ctrl);
+static int si476x_radio_g_volatile_ctrl(struct v4l2_ctrl *ctrl);
+
+enum phase_diversity_modes_idx {
+	SI476X_IDX_PHDIV_DISABLED,
+	SI476X_IDX_PHDIV_PRIMARY_COMBINING,
+	SI476X_IDX_PHDIV_PRIMARY_ANTENNA,
+	SI476X_IDX_PHDIV_SECONDARY_ANTENNA,
+	SI476X_IDX_PHDIV_SECONDARY_COMBINING,
+};
+
+static const char * const phase_diversity_modes[] = {
+	[SI476X_IDX_PHDIV_DISABLED]		= "Disabled",
+	[SI476X_IDX_PHDIV_PRIMARY_COMBINING]	= "Primary with Secondary",
+	[SI476X_IDX_PHDIV_PRIMARY_ANTENNA]	= "Primary Antenna",
+	[SI476X_IDX_PHDIV_SECONDARY_ANTENNA]	= "Secondary Antenna",
+	[SI476X_IDX_PHDIV_SECONDARY_COMBINING]	= "Secondary with Primary",
+};
+
+static inline enum phase_diversity_modes_idx
+si476x_phase_diversity_mode_to_idx(enum si476x_phase_diversity_mode mode)
+{
+	switch (mode) {
+	default:
+		fallthrough;
+	case SI476X_PHDIV_DISABLED:
+		return SI476X_IDX_PHDIV_DISABLED;
+	case SI476X_PHDIV_PRIMARY_COMBINING:
+		return SI476X_IDX_PHDIV_PRIMARY_COMBINING;
+	case SI476X_PHDIV_PRIMARY_ANTENNA:
+		return SI476X_IDX_PHDIV_PRIMARY_ANTENNA;
+	case SI476X_PHDIV_SECONDARY_ANTENNA:
+		return SI476X_IDX_PHDIV_SECONDARY_ANTENNA;
+	case SI476X_PHDIV_SECONDARY_COMBINING:
+		return SI476X_IDX_PHDIV_SECONDARY_COMBINING;
+	}
+}
+
+static inline enum si476x_phase_diversity_mode
+si476x_phase_diversity_idx_to_mode(enum phase_diversity_modes_idx idx)
+{
+	static const int idx_to_value[] = {
+		[SI476X_IDX_PHDIV_DISABLED]		= SI476X_PHDIV_DISABLED,
+		[SI476X_IDX_PHDIV_PRIMARY_COMBINING]	= SI476X_PHDIV_PRIMARY_COMBINING,
+		[SI476X_IDX_PHDIV_PRIMARY_ANTENNA]	= SI476X_PHDIV_PRIMARY_ANTENNA,
+		[SI476X_IDX_PHDIV_SECONDARY_ANTENNA]	= SI476X_PHDIV_SECONDARY_ANTENNA,
+		[SI476X_IDX_PHDIV_SECONDARY_COMBINING]	= SI476X_PHDIV_SECONDARY_COMBINING,
+	};
+
+	return idx_to_value[idx];
+}
+
+static const struct v4l2_ctrl_ops si476x_ctrl_ops = {
+	.g_volatile_ctrl	= si476x_radio_g_volatile_ctrl,
+	.s_ctrl			= si476x_radio_s_ctrl,
+};
+
+
+enum si476x_ctrl_idx {
+	SI476X_IDX_RSSI_THRESHOLD,
+	SI476X_IDX_SNR_THRESHOLD,
+	SI476X_IDX_MAX_TUNE_ERROR,
+	SI476X_IDX_HARMONICS_COUNT,
+	SI476X_IDX_DIVERSITY_MODE,
+	SI476X_IDX_INTERCHIP_LINK,
+};
+static struct v4l2_ctrl_config si476x_ctrls[] = {
+
+	/*
+	 * SI476X during its station seeking(or tuning) process uses several
+	 * parameters to determine if "the station" is valid:
+	 *
+	 *	- Signal's SNR(in dBuV) must be lower than
+	 *	#V4L2_CID_SI476X_SNR_THRESHOLD
+	 *	- Signal's RSSI(in dBuV) must be greater than
+	 *	#V4L2_CID_SI476X_RSSI_THRESHOLD
+	 *	- Signal's frequency deviation(in units of 2ppm) must not be
+	 *	more than #V4L2_CID_SI476X_MAX_TUNE_ERROR
+	 */
+	[SI476X_IDX_RSSI_THRESHOLD] = {
+		.ops	= &si476x_ctrl_ops,
+		.id	= V4L2_CID_SI476X_RSSI_THRESHOLD,
+		.name	= "Valid RSSI Threshold",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= -128,
+		.max	= 127,
+		.step	= 1,
+	},
+	[SI476X_IDX_SNR_THRESHOLD] = {
+		.ops	= &si476x_ctrl_ops,
+		.id	= V4L2_CID_SI476X_SNR_THRESHOLD,
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.name	= "Valid SNR Threshold",
+		.min	= -128,
+		.max	= 127,
+		.step	= 1,
+	},
+	[SI476X_IDX_MAX_TUNE_ERROR] = {
+		.ops	= &si476x_ctrl_ops,
+		.id	= V4L2_CID_SI476X_MAX_TUNE_ERROR,
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.name	= "Max Tune Errors",
+		.min	= 0,
+		.max	= 126 * 2,
+		.step	= 2,
+	},
+
+	/*
+	 * #V4L2_CID_SI476X_HARMONICS_COUNT -- number of harmonics
+	 * built-in power-line noise supression filter is to reject
+	 * during AM-mode operation.
+	 */
+	[SI476X_IDX_HARMONICS_COUNT] = {
+		.ops	= &si476x_ctrl_ops,
+		.id	= V4L2_CID_SI476X_HARMONICS_COUNT,
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+
+		.name	= "Count of Harmonics to Reject",
+		.min	= 0,
+		.max	= 20,
+		.step	= 1,
+	},
+
+	/*
+	 * #V4L2_CID_SI476X_DIVERSITY_MODE -- configuration which
+	 * two tuners working in diversity mode are to work in.
+	 *
+	 *  - #SI476X_IDX_PHDIV_DISABLED diversity mode disabled
+	 *  - #SI476X_IDX_PHDIV_PRIMARY_COMBINING diversity mode is
+	 *  on, primary tuner's antenna is the main one.
+	 *  - #SI476X_IDX_PHDIV_PRIMARY_ANTENNA diversity mode is
+	 *  off, primary tuner's antenna is the main one.
+	 *  - #SI476X_IDX_PHDIV_SECONDARY_ANTENNA diversity mode is
+	 *  off, secondary tuner's antenna is the main one.
+	 *  - #SI476X_IDX_PHDIV_SECONDARY_COMBINING diversity mode is
+	 *  on, secondary tuner's antenna is the main one.
+	 */
+	[SI476X_IDX_DIVERSITY_MODE] = {
+		.ops	= &si476x_ctrl_ops,
+		.id	= V4L2_CID_SI476X_DIVERSITY_MODE,
+		.type	= V4L2_CTRL_TYPE_MENU,
+		.name	= "Phase Diversity Mode",
+		.qmenu	= phase_diversity_modes,
+		.min	= 0,
+		.max	= ARRAY_SIZE(phase_diversity_modes) - 1,
+	},
+
+	/*
+	 * #V4L2_CID_SI476X_INTERCHIP_LINK -- inter-chip link in
+	 * diversity mode indicator. Allows user to determine if two
+	 * chips working in diversity mode have established a link
+	 * between each other and if the system as a whole uses
+	 * signals from both antennas to receive FM radio.
+	 */
+	[SI476X_IDX_INTERCHIP_LINK] = {
+		.ops	= &si476x_ctrl_ops,
+		.id	= V4L2_CID_SI476X_INTERCHIP_LINK,
+		.type	= V4L2_CTRL_TYPE_BOOLEAN,
+		.flags  = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_VOLATILE,
+		.name	= "Inter-Chip Link",
+		.min	= 0,
+		.max	= 1,
+		.step	= 1,
+	},
+};
+
+struct si476x_radio;
+
+/**
+ * struct si476x_radio_ops - vtable of tuner functions
+ *
+ * This table holds pointers to functions implementing particular
+ * operations depending on the mode in which the tuner chip was
+ * configured to start. If the function is not supported
+ * corresponding element is set to #NULL.
+ *
+ * @tune_freq: Tune chip to a specific frequency
+ * @seek_start: Star station seeking
+ * @rsq_status: Get Received Signal Quality(RSQ) status
+ * @rds_blckcnt: Get received RDS blocks count
+ * @phase_diversity: Change phase diversity mode of the tuner
+ * @phase_div_status: Get phase diversity mode status
+ * @acf_status: Get the status of Automatically Controlled
+ * Features(ACF)
+ * @agc_status: Get Automatic Gain Control(AGC) status
+ */
+struct si476x_radio_ops {
+	int (*tune_freq)(struct si476x_core *, struct si476x_tune_freq_args *);
+	int (*seek_start)(struct si476x_core *, bool, bool);
+	int (*rsq_status)(struct si476x_core *, struct si476x_rsq_status_args *,
+			  struct si476x_rsq_status_report *);
+	int (*rds_blckcnt)(struct si476x_core *, bool,
+			   struct si476x_rds_blockcount_report *);
+
+	int (*phase_diversity)(struct si476x_core *,
+			       enum si476x_phase_diversity_mode);
+	int (*phase_div_status)(struct si476x_core *);
+	int (*acf_status)(struct si476x_core *,
+			  struct si476x_acf_status_report *);
+	int (*agc_status)(struct si476x_core *,
+			  struct si476x_agc_status_report *);
+};
+
+/**
+ * struct si476x_radio - radio device
+ *
+ * @v4l2dev: Pointer to V4L2 device created by V4L2 subsystem
+ * @videodev: Pointer to video device created by V4L2 subsystem
+ * @ctrl_handler: V4L2 controls handler
+ * @core: Pointer to underlying core device
+ * @ops: Vtable of functions. See struct si476x_radio_ops for details
+ * @debugfs: pointer to &strucd dentry for debugfs
+ * @audmode: audio mode, as defined for the rxsubchans field
+ *	     at videodev2.h
+ *
+ * core structure is the radio device is being used
+ */
+struct si476x_radio {
+	struct v4l2_device v4l2dev;
+	struct video_device videodev;
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	struct si476x_core  *core;
+	/* This field should not be accesses unless core lock is held */
+	const struct si476x_radio_ops *ops;
+
+	struct dentry	*debugfs;
+	u32 audmode;
+};
+
+static inline struct si476x_radio *
+v4l2_ctrl_handler_to_radio(struct v4l2_ctrl_handler *d)
+{
+	return container_of(d, struct si476x_radio, ctrl_handler);
+}
+
+/*
+ * si476x_vidioc_querycap - query device capabilities
+ */
+static int si476x_radio_querycap(struct file *file, void *priv,
+				 struct v4l2_capability *capability)
+{
+	struct si476x_radio *radio = video_drvdata(file);
+
+	strscpy(capability->driver, radio->v4l2dev.name,
+		sizeof(capability->driver));
+	strscpy(capability->card, DRIVER_CARD, sizeof(capability->card));
+	return 0;
+}
+
+static int si476x_radio_enum_freq_bands(struct file *file, void *priv,
+					struct v4l2_frequency_band *band)
+{
+	int err;
+	struct si476x_radio *radio = video_drvdata(file);
+
+	if (band->tuner != 0)
+		return -EINVAL;
+
+	switch (radio->core->chip_id) {
+		/* AM/FM tuners -- all bands are supported */
+	case SI476X_CHIP_SI4761:
+	case SI476X_CHIP_SI4764:
+		if (band->index < ARRAY_SIZE(si476x_bands)) {
+			*band = si476x_bands[band->index];
+			err = 0;
+		} else {
+			err = -EINVAL;
+		}
+		break;
+		/* FM companion tuner chips -- only FM bands are
+		 * supported */
+	case SI476X_CHIP_SI4768:
+		if (band->index == SI476X_BAND_FM) {
+			*band = si476x_bands[band->index];
+			err = 0;
+		} else {
+			err = -EINVAL;
+		}
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	return err;
+}
+
+static int si476x_radio_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *tuner)
+{
+	int err;
+	struct si476x_rsq_status_report report;
+	struct si476x_radio *radio = video_drvdata(file);
+
+	struct si476x_rsq_status_args args = {
+		.primary	= false,
+		.rsqack		= false,
+		.attune		= false,
+		.cancel		= false,
+		.stcack		= false,
+	};
+
+	if (tuner->index != 0)
+		return -EINVAL;
+
+	tuner->type       = V4L2_TUNER_RADIO;
+	tuner->capability = V4L2_TUNER_CAP_LOW /* Measure frequencies
+						 * in multiples of
+						 * 62.5 Hz */
+		| V4L2_TUNER_CAP_STEREO
+		| V4L2_TUNER_CAP_HWSEEK_BOUNDED
+		| V4L2_TUNER_CAP_HWSEEK_WRAP
+		| V4L2_TUNER_CAP_HWSEEK_PROG_LIM;
+
+	si476x_core_lock(radio->core);
+
+	if (si476x_core_is_a_secondary_tuner(radio->core)) {
+		strscpy(tuner->name, "FM (secondary)", sizeof(tuner->name));
+		tuner->rxsubchans = 0;
+		tuner->rangelow = si476x_bands[SI476X_BAND_FM].rangelow;
+	} else if (si476x_core_has_am(radio->core)) {
+		if (si476x_core_is_a_primary_tuner(radio->core))
+			strscpy(tuner->name, "AM/FM (primary)",
+				sizeof(tuner->name));
+		else
+			strscpy(tuner->name, "AM/FM", sizeof(tuner->name));
+
+		tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO
+			| V4L2_TUNER_SUB_RDS;
+		tuner->capability |= V4L2_TUNER_CAP_RDS
+			| V4L2_TUNER_CAP_RDS_BLOCK_IO
+			| V4L2_TUNER_CAP_FREQ_BANDS;
+
+		tuner->rangelow = si476x_bands[SI476X_BAND_AM].rangelow;
+	} else {
+		strscpy(tuner->name, "FM", sizeof(tuner->name));
+		tuner->rxsubchans = V4L2_TUNER_SUB_RDS;
+		tuner->capability |= V4L2_TUNER_CAP_RDS
+			| V4L2_TUNER_CAP_RDS_BLOCK_IO
+			| V4L2_TUNER_CAP_FREQ_BANDS;
+		tuner->rangelow = si476x_bands[SI476X_BAND_FM].rangelow;
+	}
+
+	tuner->audmode = radio->audmode;
+
+	tuner->afc = 1;
+	tuner->rangehigh = si476x_bands[SI476X_BAND_FM].rangehigh;
+
+	err = radio->ops->rsq_status(radio->core,
+				     &args, &report);
+	if (err < 0) {
+		tuner->signal = 0;
+	} else {
+		/*
+		 * tuner->signal value range: 0x0000 .. 0xFFFF,
+		 * report.rssi: -128 .. 127
+		 */
+		tuner->signal = (report.rssi + 128) * 257;
+	}
+	si476x_core_unlock(radio->core);
+
+	return err;
+}
+
+static int si476x_radio_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *tuner)
+{
+	struct si476x_radio *radio = video_drvdata(file);
+
+	if (tuner->index != 0)
+		return -EINVAL;
+
+	if (tuner->audmode == V4L2_TUNER_MODE_MONO ||
+	    tuner->audmode == V4L2_TUNER_MODE_STEREO)
+		radio->audmode = tuner->audmode;
+	else
+		radio->audmode = V4L2_TUNER_MODE_STEREO;
+
+	return 0;
+}
+
+static int si476x_radio_init_vtable(struct si476x_radio *radio,
+				    enum si476x_func func)
+{
+	static const struct si476x_radio_ops fm_ops = {
+		.tune_freq		= si476x_core_cmd_fm_tune_freq,
+		.seek_start		= si476x_core_cmd_fm_seek_start,
+		.rsq_status		= si476x_core_cmd_fm_rsq_status,
+		.rds_blckcnt		= si476x_core_cmd_fm_rds_blockcount,
+		.phase_diversity	= si476x_core_cmd_fm_phase_diversity,
+		.phase_div_status	= si476x_core_cmd_fm_phase_div_status,
+		.acf_status		= si476x_core_cmd_fm_acf_status,
+		.agc_status		= si476x_core_cmd_agc_status,
+	};
+
+	static const struct si476x_radio_ops am_ops = {
+		.tune_freq		= si476x_core_cmd_am_tune_freq,
+		.seek_start		= si476x_core_cmd_am_seek_start,
+		.rsq_status		= si476x_core_cmd_am_rsq_status,
+		.rds_blckcnt		= NULL,
+		.phase_diversity	= NULL,
+		.phase_div_status	= NULL,
+		.acf_status		= si476x_core_cmd_am_acf_status,
+		.agc_status		= NULL,
+	};
+
+	switch (func) {
+	case SI476X_FUNC_FM_RECEIVER:
+		radio->ops = &fm_ops;
+		return 0;
+
+	case SI476X_FUNC_AM_RECEIVER:
+		radio->ops = &am_ops;
+		return 0;
+	default:
+		WARN(1, "Unexpected tuner function value\n");
+		return -EINVAL;
+	}
+}
+
+static int si476x_radio_pretune(struct si476x_radio *radio,
+				enum si476x_func func)
+{
+	int retval;
+
+	struct si476x_tune_freq_args args = {
+		.zifsr		= false,
+		.hd		= false,
+		.injside	= SI476X_INJSIDE_AUTO,
+		.tunemode	= SI476X_TM_VALIDATED_NORMAL_TUNE,
+		.smoothmetrics	= SI476X_SM_INITIALIZE_AUDIO,
+		.antcap		= 0,
+	};
+
+	switch (func) {
+	case SI476X_FUNC_FM_RECEIVER:
+		args.freq = v4l2_to_si476x(radio->core,
+					   92 * FREQ_MUL);
+		retval = radio->ops->tune_freq(radio->core, &args);
+		break;
+	case SI476X_FUNC_AM_RECEIVER:
+		args.freq = v4l2_to_si476x(radio->core,
+					   0.6 * FREQ_MUL);
+		retval = radio->ops->tune_freq(radio->core, &args);
+		break;
+	default:
+		WARN(1, "Unexpected tuner function value\n");
+		retval = -EINVAL;
+	}
+
+	return retval;
+}
+static int si476x_radio_do_post_powerup_init(struct si476x_radio *radio,
+					     enum si476x_func func)
+{
+	int err;
+
+	/* regcache_mark_dirty(radio->core->regmap); */
+	err = regcache_sync_region(radio->core->regmap,
+				   SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE,
+				   SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT);
+	if (err < 0)
+		return err;
+
+	err = regcache_sync_region(radio->core->regmap,
+				   SI476X_PROP_AUDIO_DEEMPHASIS,
+				   SI476X_PROP_AUDIO_PWR_LINE_FILTER);
+	if (err < 0)
+		return err;
+
+	err = regcache_sync_region(radio->core->regmap,
+				   SI476X_PROP_INT_CTL_ENABLE,
+				   SI476X_PROP_INT_CTL_ENABLE);
+	if (err < 0)
+		return err;
+
+	/*
+	 * Is there any point in restoring SNR and the like
+	 * when switching between AM/FM?
+	 */
+	err = regcache_sync_region(radio->core->regmap,
+				   SI476X_PROP_VALID_MAX_TUNE_ERROR,
+				   SI476X_PROP_VALID_MAX_TUNE_ERROR);
+	if (err < 0)
+		return err;
+
+	err = regcache_sync_region(radio->core->regmap,
+				   SI476X_PROP_VALID_SNR_THRESHOLD,
+				   SI476X_PROP_VALID_RSSI_THRESHOLD);
+	if (err < 0)
+		return err;
+
+	if (func == SI476X_FUNC_FM_RECEIVER) {
+		if (si476x_core_has_diversity(radio->core)) {
+			err = si476x_core_cmd_fm_phase_diversity(radio->core,
+								 radio->core->diversity_mode);
+			if (err < 0)
+				return err;
+		}
+
+		err = regcache_sync_region(radio->core->regmap,
+					   SI476X_PROP_FM_RDS_INTERRUPT_SOURCE,
+					   SI476X_PROP_FM_RDS_CONFIG);
+		if (err < 0)
+			return err;
+	}
+
+	return si476x_radio_init_vtable(radio, func);
+
+}
+
+static int si476x_radio_change_func(struct si476x_radio *radio,
+				    enum si476x_func func)
+{
+	int err;
+	bool soft;
+	/*
+	 * Since power/up down is a very time consuming operation,
+	 * try to avoid doing it if the requested mode matches the one
+	 * the tuner is in
+	 */
+	if (func == radio->core->power_up_parameters.func)
+		return 0;
+
+	soft = true;
+	err = si476x_core_stop(radio->core, soft);
+	if (err < 0) {
+		/*
+		 * OK, if the chip does not want to play nice let's
+		 * try to reset it in more brutal way
+		 */
+		soft = false;
+		err = si476x_core_stop(radio->core, soft);
+		if (err < 0)
+			return err;
+	}
+	/*
+	  Set the desired radio tuner function
+	 */
+	radio->core->power_up_parameters.func = func;
+
+	err = si476x_core_start(radio->core, soft);
+	if (err < 0)
+		return err;
+
+	/*
+	 * No need to do the rest of manipulations for the bootlader
+	 * mode
+	 */
+	if (func != SI476X_FUNC_FM_RECEIVER &&
+	    func != SI476X_FUNC_AM_RECEIVER)
+		return err;
+
+	return si476x_radio_do_post_powerup_init(radio, func);
+}
+
+static int si476x_radio_g_frequency(struct file *file, void *priv,
+			      struct v4l2_frequency *f)
+{
+	int err;
+	struct si476x_radio *radio = video_drvdata(file);
+
+	if (f->tuner != 0 ||
+	    f->type  != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	si476x_core_lock(radio->core);
+
+	if (radio->ops->rsq_status) {
+		struct si476x_rsq_status_report report;
+		struct si476x_rsq_status_args   args = {
+			.primary	= false,
+			.rsqack		= false,
+			.attune		= true,
+			.cancel		= false,
+			.stcack		= false,
+		};
+
+		err = radio->ops->rsq_status(radio->core, &args, &report);
+		if (!err)
+			f->frequency = si476x_to_v4l2(radio->core,
+						      report.readfreq);
+	} else {
+		err = -EINVAL;
+	}
+
+	si476x_core_unlock(radio->core);
+
+	return err;
+}
+
+static int si476x_radio_s_frequency(struct file *file, void *priv,
+				    const struct v4l2_frequency *f)
+{
+	int err;
+	u32 freq = f->frequency;
+	struct si476x_tune_freq_args args;
+	struct si476x_radio *radio = video_drvdata(file);
+
+	const u32 midrange = (si476x_bands[SI476X_BAND_AM].rangehigh +
+			      si476x_bands[SI476X_BAND_FM].rangelow) / 2;
+	const int band = (freq > midrange) ?
+		SI476X_BAND_FM : SI476X_BAND_AM;
+	const enum si476x_func func = (band == SI476X_BAND_AM) ?
+		SI476X_FUNC_AM_RECEIVER : SI476X_FUNC_FM_RECEIVER;
+
+	if (f->tuner != 0 ||
+	    f->type  != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	si476x_core_lock(radio->core);
+
+	freq = clamp(freq,
+		     si476x_bands[band].rangelow,
+		     si476x_bands[band].rangehigh);
+
+	if (si476x_radio_freq_is_inside_of_the_band(freq,
+						    SI476X_BAND_AM) &&
+	    (!si476x_core_has_am(radio->core) ||
+	     si476x_core_is_a_secondary_tuner(radio->core))) {
+		err = -EINVAL;
+		goto unlock;
+	}
+
+	err = si476x_radio_change_func(radio, func);
+	if (err < 0)
+		goto unlock;
+
+	args.zifsr		= false;
+	args.hd			= false;
+	args.injside		= SI476X_INJSIDE_AUTO;
+	args.freq		= v4l2_to_si476x(radio->core, freq);
+	args.tunemode		= SI476X_TM_VALIDATED_NORMAL_TUNE;
+	args.smoothmetrics	= SI476X_SM_INITIALIZE_AUDIO;
+	args.antcap		= 0;
+
+	err = radio->ops->tune_freq(radio->core, &args);
+
+unlock:
+	si476x_core_unlock(radio->core);
+	return err;
+}
+
+static int si476x_radio_s_hw_freq_seek(struct file *file, void *priv,
+				       const struct v4l2_hw_freq_seek *seek)
+{
+	int err;
+	enum si476x_func func;
+	u32 rangelow = seek->rangelow, rangehigh = seek->rangehigh;
+	struct si476x_radio *radio = video_drvdata(file);
+
+	if (file->f_flags & O_NONBLOCK)
+		return -EAGAIN;
+
+	if (seek->tuner != 0 ||
+	    seek->type  != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	si476x_core_lock(radio->core);
+
+	if (!rangelow) {
+		err = regmap_read(radio->core->regmap,
+				  SI476X_PROP_SEEK_BAND_BOTTOM,
+				  &rangelow);
+		if (err)
+			goto unlock;
+		rangelow = si476x_to_v4l2(radio->core, rangelow);
+	}
+	if (!rangehigh) {
+		err = regmap_read(radio->core->regmap,
+				  SI476X_PROP_SEEK_BAND_TOP,
+				  &rangehigh);
+		if (err)
+			goto unlock;
+		rangehigh = si476x_to_v4l2(radio->core, rangehigh);
+	}
+
+	if (rangelow > rangehigh) {
+		err = -EINVAL;
+		goto unlock;
+	}
+
+	if (si476x_radio_range_is_inside_of_the_band(rangelow, rangehigh,
+						     SI476X_BAND_FM)) {
+		func = SI476X_FUNC_FM_RECEIVER;
+
+	} else if (si476x_core_has_am(radio->core) &&
+		   si476x_radio_range_is_inside_of_the_band(rangelow, rangehigh,
+							    SI476X_BAND_AM)) {
+		func = SI476X_FUNC_AM_RECEIVER;
+	} else {
+		err = -EINVAL;
+		goto unlock;
+	}
+
+	err = si476x_radio_change_func(radio, func);
+	if (err < 0)
+		goto unlock;
+
+	if (seek->rangehigh) {
+		err = regmap_write(radio->core->regmap,
+				   SI476X_PROP_SEEK_BAND_TOP,
+				   v4l2_to_si476x(radio->core,
+						  seek->rangehigh));
+		if (err)
+			goto unlock;
+	}
+	if (seek->rangelow) {
+		err = regmap_write(radio->core->regmap,
+				   SI476X_PROP_SEEK_BAND_BOTTOM,
+				   v4l2_to_si476x(radio->core,
+						  seek->rangelow));
+		if (err)
+			goto unlock;
+	}
+	if (seek->spacing) {
+		err = regmap_write(radio->core->regmap,
+				     SI476X_PROP_SEEK_FREQUENCY_SPACING,
+				     v4l2_to_si476x(radio->core,
+						    seek->spacing));
+		if (err)
+			goto unlock;
+	}
+
+	err = radio->ops->seek_start(radio->core,
+				     seek->seek_upward,
+				     seek->wrap_around);
+unlock:
+	si476x_core_unlock(radio->core);
+
+
+
+	return err;
+}
+
+static int si476x_radio_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+	int retval;
+	struct si476x_radio *radio = v4l2_ctrl_handler_to_radio(ctrl->handler);
+
+	si476x_core_lock(radio->core);
+
+	switch (ctrl->id) {
+	case V4L2_CID_SI476X_INTERCHIP_LINK:
+		if (si476x_core_has_diversity(radio->core)) {
+			if (radio->ops->phase_diversity) {
+				retval = radio->ops->phase_div_status(radio->core);
+				if (retval < 0)
+					break;
+
+				ctrl->val = !!SI476X_PHDIV_STATUS_LINK_LOCKED(retval);
+				retval = 0;
+				break;
+			} else {
+				retval = -ENOTTY;
+				break;
+			}
+		}
+		retval = -EINVAL;
+		break;
+	default:
+		retval = -EINVAL;
+		break;
+	}
+	si476x_core_unlock(radio->core);
+	return retval;
+
+}
+
+static int si476x_radio_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	int retval;
+	enum si476x_phase_diversity_mode mode;
+	struct si476x_radio *radio = v4l2_ctrl_handler_to_radio(ctrl->handler);
+
+	si476x_core_lock(radio->core);
+
+	switch (ctrl->id) {
+	case V4L2_CID_SI476X_HARMONICS_COUNT:
+		retval = regmap_update_bits(radio->core->regmap,
+					    SI476X_PROP_AUDIO_PWR_LINE_FILTER,
+					    SI476X_PROP_PWR_HARMONICS_MASK,
+					    ctrl->val);
+		break;
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		switch (ctrl->val) {
+		case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED:
+			retval = regmap_update_bits(radio->core->regmap,
+						    SI476X_PROP_AUDIO_PWR_LINE_FILTER,
+						    SI476X_PROP_PWR_ENABLE_MASK,
+						    0);
+			break;
+		case V4L2_CID_POWER_LINE_FREQUENCY_50HZ:
+			retval = regmap_update_bits(radio->core->regmap,
+						    SI476X_PROP_AUDIO_PWR_LINE_FILTER,
+						    SI476X_PROP_PWR_GRID_MASK,
+						    SI476X_PROP_PWR_GRID_50HZ);
+			break;
+		case V4L2_CID_POWER_LINE_FREQUENCY_60HZ:
+			retval = regmap_update_bits(radio->core->regmap,
+						    SI476X_PROP_AUDIO_PWR_LINE_FILTER,
+						    SI476X_PROP_PWR_GRID_MASK,
+						    SI476X_PROP_PWR_GRID_60HZ);
+			break;
+		default:
+			retval = -EINVAL;
+			break;
+		}
+		break;
+	case V4L2_CID_SI476X_RSSI_THRESHOLD:
+		retval = regmap_write(radio->core->regmap,
+				      SI476X_PROP_VALID_RSSI_THRESHOLD,
+				      ctrl->val);
+		break;
+	case V4L2_CID_SI476X_SNR_THRESHOLD:
+		retval = regmap_write(radio->core->regmap,
+				      SI476X_PROP_VALID_SNR_THRESHOLD,
+				      ctrl->val);
+		break;
+	case V4L2_CID_SI476X_MAX_TUNE_ERROR:
+		retval = regmap_write(radio->core->regmap,
+				      SI476X_PROP_VALID_MAX_TUNE_ERROR,
+				      ctrl->val);
+		break;
+	case V4L2_CID_RDS_RECEPTION:
+		/*
+		 * It looks like RDS related properties are
+		 * inaccessible when tuner is in AM mode, so cache the
+		 * changes
+		 */
+		if (si476x_core_is_in_am_receiver_mode(radio->core))
+			regcache_cache_only(radio->core->regmap, true);
+
+		if (ctrl->val) {
+			retval = regmap_write(radio->core->regmap,
+					      SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT,
+					      radio->core->rds_fifo_depth);
+			if (retval < 0)
+				break;
+
+			if (radio->core->client->irq) {
+				retval = regmap_write(radio->core->regmap,
+						      SI476X_PROP_FM_RDS_INTERRUPT_SOURCE,
+						      SI476X_RDSRECV);
+				if (retval < 0)
+					break;
+			}
+
+			/* Drain RDS FIFO before enabling RDS processing */
+			retval = si476x_core_cmd_fm_rds_status(radio->core,
+							       false,
+							       true,
+							       true,
+							       NULL);
+			if (retval < 0)
+				break;
+
+			retval = regmap_update_bits(radio->core->regmap,
+						    SI476X_PROP_FM_RDS_CONFIG,
+						    SI476X_PROP_RDSEN_MASK,
+						    SI476X_PROP_RDSEN);
+		} else {
+			retval = regmap_update_bits(radio->core->regmap,
+						    SI476X_PROP_FM_RDS_CONFIG,
+						    SI476X_PROP_RDSEN_MASK,
+						    !SI476X_PROP_RDSEN);
+		}
+
+		if (si476x_core_is_in_am_receiver_mode(radio->core))
+			regcache_cache_only(radio->core->regmap, false);
+		break;
+	case V4L2_CID_TUNE_DEEMPHASIS:
+		retval = regmap_write(radio->core->regmap,
+				      SI476X_PROP_AUDIO_DEEMPHASIS,
+				      ctrl->val);
+		break;
+
+	case V4L2_CID_SI476X_DIVERSITY_MODE:
+		mode = si476x_phase_diversity_idx_to_mode(ctrl->val);
+
+		if (mode == radio->core->diversity_mode) {
+			retval = 0;
+			break;
+		}
+
+		if (si476x_core_is_in_am_receiver_mode(radio->core)) {
+			/*
+			 * Diversity cannot be configured while tuner
+			 * is in AM mode so save the changes and carry on.
+			 */
+			radio->core->diversity_mode = mode;
+			retval = 0;
+		} else {
+			retval = radio->ops->phase_diversity(radio->core, mode);
+			if (!retval)
+				radio->core->diversity_mode = mode;
+		}
+		break;
+
+	default:
+		retval = -EINVAL;
+		break;
+	}
+
+	si476x_core_unlock(radio->core);
+
+	return retval;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int si476x_radio_g_register(struct file *file, void *fh,
+				   struct v4l2_dbg_register *reg)
+{
+	int err;
+	unsigned int value;
+	struct si476x_radio *radio = video_drvdata(file);
+
+	si476x_core_lock(radio->core);
+	reg->size = 2;
+	err = regmap_read(radio->core->regmap,
+			  (unsigned int)reg->reg, &value);
+	reg->val = value;
+	si476x_core_unlock(radio->core);
+
+	return err;
+}
+static int si476x_radio_s_register(struct file *file, void *fh,
+				   const struct v4l2_dbg_register *reg)
+{
+
+	int err;
+	struct si476x_radio *radio = video_drvdata(file);
+
+	si476x_core_lock(radio->core);
+	err = regmap_write(radio->core->regmap,
+			   (unsigned int)reg->reg,
+			   (unsigned int)reg->val);
+	si476x_core_unlock(radio->core);
+
+	return err;
+}
+#endif
+
+static int si476x_radio_fops_open(struct file *file)
+{
+	struct si476x_radio *radio = video_drvdata(file);
+	int err;
+
+	err = v4l2_fh_open(file);
+	if (err)
+		return err;
+
+	if (v4l2_fh_is_singular_file(file)) {
+		si476x_core_lock(radio->core);
+		err = si476x_core_set_power_state(radio->core,
+						  SI476X_POWER_UP_FULL);
+		if (err < 0)
+			goto done;
+
+		err = si476x_radio_do_post_powerup_init(radio,
+							radio->core->power_up_parameters.func);
+		if (err < 0)
+			goto power_down;
+
+		err = si476x_radio_pretune(radio,
+					   radio->core->power_up_parameters.func);
+		if (err < 0)
+			goto power_down;
+
+		si476x_core_unlock(radio->core);
+		/*Must be done after si476x_core_unlock to prevent a deadlock*/
+		v4l2_ctrl_handler_setup(&radio->ctrl_handler);
+	}
+
+	return err;
+
+power_down:
+	si476x_core_set_power_state(radio->core,
+				    SI476X_POWER_DOWN);
+done:
+	si476x_core_unlock(radio->core);
+	v4l2_fh_release(file);
+
+	return err;
+}
+
+static int si476x_radio_fops_release(struct file *file)
+{
+	struct si476x_radio *radio = video_drvdata(file);
+
+	if (v4l2_fh_is_singular_file(file) &&
+	    atomic_read(&radio->core->is_alive))
+		si476x_core_set_power_state(radio->core,
+					    SI476X_POWER_DOWN);
+
+	return v4l2_fh_release(file);
+}
+
+static ssize_t si476x_radio_fops_read(struct file *file, char __user *buf,
+				      size_t count, loff_t *ppos)
+{
+	ssize_t      rval;
+	size_t       fifo_len;
+	unsigned int copied;
+
+	struct si476x_radio *radio = video_drvdata(file);
+
+	/* block if no new data available */
+	if (kfifo_is_empty(&radio->core->rds_fifo)) {
+		if (file->f_flags & O_NONBLOCK)
+			return -EWOULDBLOCK;
+
+		rval = wait_event_interruptible(radio->core->rds_read_queue,
+						(!kfifo_is_empty(&radio->core->rds_fifo) ||
+						 !atomic_read(&radio->core->is_alive)));
+		if (rval < 0)
+			return -EINTR;
+
+		if (!atomic_read(&radio->core->is_alive))
+			return -ENODEV;
+	}
+
+	fifo_len = kfifo_len(&radio->core->rds_fifo);
+
+	if (kfifo_to_user(&radio->core->rds_fifo, buf,
+			  min(fifo_len, count),
+			  &copied) != 0) {
+		dev_warn(&radio->videodev.dev,
+			 "Error during FIFO to userspace copy\n");
+		rval = -EIO;
+	} else {
+		rval = (ssize_t)copied;
+	}
+
+	return rval;
+}
+
+static __poll_t si476x_radio_fops_poll(struct file *file,
+				struct poll_table_struct *pts)
+{
+	struct si476x_radio *radio = video_drvdata(file);
+	__poll_t req_events = poll_requested_events(pts);
+	__poll_t err = v4l2_ctrl_poll(file, pts);
+
+	if (req_events & (EPOLLIN | EPOLLRDNORM)) {
+		if (atomic_read(&radio->core->is_alive))
+			poll_wait(file, &radio->core->rds_read_queue, pts);
+
+		if (!atomic_read(&radio->core->is_alive))
+			err = EPOLLHUP;
+
+		if (!kfifo_is_empty(&radio->core->rds_fifo))
+			err = EPOLLIN | EPOLLRDNORM;
+	}
+
+	return err;
+}
+
+static const struct v4l2_file_operations si476x_fops = {
+	.owner			= THIS_MODULE,
+	.read			= si476x_radio_fops_read,
+	.poll			= si476x_radio_fops_poll,
+	.unlocked_ioctl		= video_ioctl2,
+	.open			= si476x_radio_fops_open,
+	.release		= si476x_radio_fops_release,
+};
+
+
+static const struct v4l2_ioctl_ops si4761_ioctl_ops = {
+	.vidioc_querycap		= si476x_radio_querycap,
+	.vidioc_g_tuner			= si476x_radio_g_tuner,
+	.vidioc_s_tuner			= si476x_radio_s_tuner,
+
+	.vidioc_g_frequency		= si476x_radio_g_frequency,
+	.vidioc_s_frequency		= si476x_radio_s_frequency,
+	.vidioc_s_hw_freq_seek		= si476x_radio_s_hw_freq_seek,
+	.vidioc_enum_freq_bands		= si476x_radio_enum_freq_bands,
+
+	.vidioc_subscribe_event		= v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register		= si476x_radio_g_register,
+	.vidioc_s_register		= si476x_radio_s_register,
+#endif
+};
+
+
+static const struct video_device si476x_viddev_template = {
+	.fops			= &si476x_fops,
+	.name			= DRIVER_NAME,
+	.release		= video_device_release_empty,
+};
+
+
+
+static ssize_t si476x_radio_read_acf_blob(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	int err;
+	struct si476x_radio *radio = file->private_data;
+	struct si476x_acf_status_report report;
+
+	si476x_core_lock(radio->core);
+	if (radio->ops->acf_status)
+		err = radio->ops->acf_status(radio->core, &report);
+	else
+		err = -ENOENT;
+	si476x_core_unlock(radio->core);
+
+	if (err < 0)
+		return err;
+
+	return simple_read_from_buffer(user_buf, count, ppos, &report,
+				       sizeof(report));
+}
+
+static const struct file_operations radio_acf_fops = {
+	.open	= simple_open,
+	.llseek = default_llseek,
+	.read	= si476x_radio_read_acf_blob,
+};
+
+static ssize_t si476x_radio_read_rds_blckcnt_blob(struct file *file,
+						  char __user *user_buf,
+						  size_t count, loff_t *ppos)
+{
+	int err;
+	struct si476x_radio *radio = file->private_data;
+	struct si476x_rds_blockcount_report report;
+
+	si476x_core_lock(radio->core);
+	if (radio->ops->rds_blckcnt)
+		err = radio->ops->rds_blckcnt(radio->core, true,
+					       &report);
+	else
+		err = -ENOENT;
+	si476x_core_unlock(radio->core);
+
+	if (err < 0)
+		return err;
+
+	return simple_read_from_buffer(user_buf, count, ppos, &report,
+				       sizeof(report));
+}
+
+static const struct file_operations radio_rds_blckcnt_fops = {
+	.open	= simple_open,
+	.llseek = default_llseek,
+	.read	= si476x_radio_read_rds_blckcnt_blob,
+};
+
+static ssize_t si476x_radio_read_agc_blob(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	int err;
+	struct si476x_radio *radio = file->private_data;
+	struct si476x_agc_status_report report;
+
+	si476x_core_lock(radio->core);
+	if (radio->ops->rds_blckcnt)
+		err = radio->ops->agc_status(radio->core, &report);
+	else
+		err = -ENOENT;
+	si476x_core_unlock(radio->core);
+
+	if (err < 0)
+		return err;
+
+	return simple_read_from_buffer(user_buf, count, ppos, &report,
+				       sizeof(report));
+}
+
+static const struct file_operations radio_agc_fops = {
+	.open	= simple_open,
+	.llseek = default_llseek,
+	.read	= si476x_radio_read_agc_blob,
+};
+
+static ssize_t si476x_radio_read_rsq_blob(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	int err;
+	struct si476x_radio *radio = file->private_data;
+	struct si476x_rsq_status_report report;
+	struct si476x_rsq_status_args args = {
+		.primary	= false,
+		.rsqack		= false,
+		.attune		= false,
+		.cancel		= false,
+		.stcack		= false,
+	};
+
+	si476x_core_lock(radio->core);
+	if (radio->ops->rds_blckcnt)
+		err = radio->ops->rsq_status(radio->core, &args, &report);
+	else
+		err = -ENOENT;
+	si476x_core_unlock(radio->core);
+
+	if (err < 0)
+		return err;
+
+	return simple_read_from_buffer(user_buf, count, ppos, &report,
+				       sizeof(report));
+}
+
+static const struct file_operations radio_rsq_fops = {
+	.open	= simple_open,
+	.llseek = default_llseek,
+	.read	= si476x_radio_read_rsq_blob,
+};
+
+static ssize_t si476x_radio_read_rsq_primary_blob(struct file *file,
+						  char __user *user_buf,
+						  size_t count, loff_t *ppos)
+{
+	int err;
+	struct si476x_radio *radio = file->private_data;
+	struct si476x_rsq_status_report report;
+	struct si476x_rsq_status_args args = {
+		.primary	= true,
+		.rsqack		= false,
+		.attune		= false,
+		.cancel		= false,
+		.stcack		= false,
+	};
+
+	si476x_core_lock(radio->core);
+	if (radio->ops->rds_blckcnt)
+		err = radio->ops->rsq_status(radio->core, &args, &report);
+	else
+		err = -ENOENT;
+	si476x_core_unlock(radio->core);
+
+	if (err < 0)
+		return err;
+
+	return simple_read_from_buffer(user_buf, count, ppos, &report,
+				       sizeof(report));
+}
+
+static const struct file_operations radio_rsq_primary_fops = {
+	.open	= simple_open,
+	.llseek = default_llseek,
+	.read	= si476x_radio_read_rsq_primary_blob,
+};
+
+
+static void si476x_radio_init_debugfs(struct si476x_radio *radio)
+{
+	radio->debugfs = debugfs_create_dir(dev_name(radio->v4l2dev.dev), NULL);
+
+	debugfs_create_file("acf", S_IRUGO, radio->debugfs, radio,
+			    &radio_acf_fops);
+
+	debugfs_create_file("rds_blckcnt", S_IRUGO, radio->debugfs, radio,
+			    &radio_rds_blckcnt_fops);
+
+	debugfs_create_file("agc", S_IRUGO, radio->debugfs, radio,
+			    &radio_agc_fops);
+
+	debugfs_create_file("rsq", S_IRUGO, radio->debugfs, radio,
+			    &radio_rsq_fops);
+
+	debugfs_create_file("rsq_primary", S_IRUGO, radio->debugfs, radio,
+			    &radio_rsq_primary_fops);
+}
+
+
+static int si476x_radio_add_new_custom(struct si476x_radio *radio,
+				       enum si476x_ctrl_idx idx)
+{
+	int rval;
+	struct v4l2_ctrl *ctrl;
+
+	ctrl = v4l2_ctrl_new_custom(&radio->ctrl_handler,
+				    &si476x_ctrls[idx],
+				    NULL);
+	rval = radio->ctrl_handler.error;
+	if (ctrl == NULL && rval)
+		dev_err(radio->v4l2dev.dev,
+			"Could not initialize '%s' control %d\n",
+			si476x_ctrls[idx].name, rval);
+
+	return rval;
+}
+
+static int si476x_radio_probe(struct platform_device *pdev)
+{
+	int rval;
+	struct si476x_radio *radio;
+	struct v4l2_ctrl *ctrl;
+
+	static atomic_t instance = ATOMIC_INIT(0);
+
+	radio = devm_kzalloc(&pdev->dev, sizeof(*radio), GFP_KERNEL);
+	if (!radio)
+		return -ENOMEM;
+
+	radio->core = i2c_mfd_cell_to_core(&pdev->dev);
+
+	v4l2_device_set_name(&radio->v4l2dev, DRIVER_NAME, &instance);
+
+	rval = v4l2_device_register(&pdev->dev, &radio->v4l2dev);
+	if (rval) {
+		dev_err(&pdev->dev, "Cannot register v4l2_device.\n");
+		return rval;
+	}
+
+	memcpy(&radio->videodev, &si476x_viddev_template,
+	       sizeof(struct video_device));
+
+	radio->videodev.v4l2_dev  = &radio->v4l2dev;
+	radio->videodev.ioctl_ops = &si4761_ioctl_ops;
+	radio->videodev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO |
+				      V4L2_CAP_HW_FREQ_SEEK;
+
+	si476x_core_lock(radio->core);
+	if (!si476x_core_is_a_secondary_tuner(radio->core))
+		radio->videodev.device_caps |= V4L2_CAP_RDS_CAPTURE |
+					       V4L2_CAP_READWRITE;
+	si476x_core_unlock(radio->core);
+
+	video_set_drvdata(&radio->videodev, radio);
+	platform_set_drvdata(pdev, radio);
+
+
+	radio->v4l2dev.ctrl_handler = &radio->ctrl_handler;
+	v4l2_ctrl_handler_init(&radio->ctrl_handler,
+			       1 + ARRAY_SIZE(si476x_ctrls));
+
+	if (si476x_core_has_am(radio->core)) {
+		ctrl = v4l2_ctrl_new_std_menu(&radio->ctrl_handler,
+					      &si476x_ctrl_ops,
+					      V4L2_CID_POWER_LINE_FREQUENCY,
+					      V4L2_CID_POWER_LINE_FREQUENCY_60HZ,
+					      0, 0);
+		rval = radio->ctrl_handler.error;
+		if (ctrl == NULL && rval) {
+			dev_err(&pdev->dev, "Could not initialize V4L2_CID_POWER_LINE_FREQUENCY control %d\n",
+				rval);
+			goto exit;
+		}
+
+		rval = si476x_radio_add_new_custom(radio,
+						   SI476X_IDX_HARMONICS_COUNT);
+		if (rval < 0)
+			goto exit;
+	}
+
+	rval = si476x_radio_add_new_custom(radio, SI476X_IDX_RSSI_THRESHOLD);
+	if (rval < 0)
+		goto exit;
+
+	rval = si476x_radio_add_new_custom(radio, SI476X_IDX_SNR_THRESHOLD);
+	if (rval < 0)
+		goto exit;
+
+	rval = si476x_radio_add_new_custom(radio, SI476X_IDX_MAX_TUNE_ERROR);
+	if (rval < 0)
+		goto exit;
+
+	ctrl = v4l2_ctrl_new_std_menu(&radio->ctrl_handler,
+				      &si476x_ctrl_ops,
+				      V4L2_CID_TUNE_DEEMPHASIS,
+				      V4L2_DEEMPHASIS_75_uS, 0, 0);
+	rval = radio->ctrl_handler.error;
+	if (ctrl == NULL && rval) {
+		dev_err(&pdev->dev, "Could not initialize V4L2_CID_TUNE_DEEMPHASIS control %d\n",
+			rval);
+		goto exit;
+	}
+
+	ctrl = v4l2_ctrl_new_std(&radio->ctrl_handler, &si476x_ctrl_ops,
+				 V4L2_CID_RDS_RECEPTION,
+				 0, 1, 1, 1);
+	rval = radio->ctrl_handler.error;
+	if (ctrl == NULL && rval) {
+		dev_err(&pdev->dev, "Could not initialize V4L2_CID_RDS_RECEPTION control %d\n",
+			rval);
+		goto exit;
+	}
+
+	if (si476x_core_has_diversity(radio->core)) {
+		si476x_ctrls[SI476X_IDX_DIVERSITY_MODE].def =
+			si476x_phase_diversity_mode_to_idx(radio->core->diversity_mode);
+		rval = si476x_radio_add_new_custom(radio, SI476X_IDX_DIVERSITY_MODE);
+		if (rval < 0)
+			goto exit;
+
+		rval = si476x_radio_add_new_custom(radio, SI476X_IDX_INTERCHIP_LINK);
+		if (rval < 0)
+			goto exit;
+	}
+
+	/* register video device */
+	rval = video_register_device(&radio->videodev, VFL_TYPE_RADIO, -1);
+	if (rval < 0) {
+		dev_err(&pdev->dev, "Could not register video device\n");
+		goto exit;
+	}
+
+	si476x_radio_init_debugfs(radio);
+
+	return 0;
+exit:
+	v4l2_ctrl_handler_free(radio->videodev.ctrl_handler);
+	v4l2_device_unregister(&radio->v4l2dev);
+	return rval;
+}
+
+static void si476x_radio_remove(struct platform_device *pdev)
+{
+	struct si476x_radio *radio = platform_get_drvdata(pdev);
+
+	v4l2_ctrl_handler_free(radio->videodev.ctrl_handler);
+	video_unregister_device(&radio->videodev);
+	v4l2_device_unregister(&radio->v4l2dev);
+	debugfs_remove_recursive(radio->debugfs);
+}
+
+MODULE_ALIAS("platform:si476x-radio");
+
+static struct platform_driver si476x_radio_driver = {
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= si476x_radio_probe,
+	.remove		= si476x_radio_remove,
+};
+module_platform_driver(si476x_radio_driver);
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("Driver for Si4761/64/68 AM/FM Radio MFD Cell");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
new file mode 100644
index 000000000..d9547f625
--- /dev/null
+++ b/drivers/media/radio/radio-tea5764.c
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * driver/media/radio/radio-tea5764.c
+ *
+ * Driver for TEA5764 radio chip for linux 2.6.
+ * This driver is for TEA5764 chip from NXP, used in EZX phones from Motorola.
+ * The I2C protocol is used for communicate with chip.
+ *
+ * Based in radio-tea5761.c Copyright (C) 2005 Nokia Corporation
+ *
+ *  Copyright (c) 2008 Fabio Belavenuto <belavenuto@gmail.com>
+ *
+ * History:
+ * 2008-12-06   Fabio Belavenuto <belavenuto@gmail.com>
+ *              initial code
+ *
+ * TODO:
+ *  add platform_data support for IRQs platform dependencies
+ *  add RDS support
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>			/* Initdata			*/
+#include <linux/videodev2.h>		/* kernel radio structs		*/
+#include <linux/i2c.h>			/* I2C				*/
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+
+#define DRIVER_VERSION	"0.0.2"
+
+#define DRIVER_AUTHOR	"Fabio Belavenuto <belavenuto@gmail.com>"
+#define DRIVER_DESC	"A driver for the TEA5764 radio chip for EZX Phones."
+
+#define PINFO(format, ...)\
+	printk(KERN_INFO KBUILD_MODNAME ": "\
+		DRIVER_VERSION ": " format "\n", ## __VA_ARGS__)
+#define PWARN(format, ...)\
+	printk(KERN_WARNING KBUILD_MODNAME ": "\
+		DRIVER_VERSION ": " format "\n", ## __VA_ARGS__)
+# define PDEBUG(format, ...)\
+	printk(KERN_DEBUG KBUILD_MODNAME ": "\
+		DRIVER_VERSION ": " format "\n", ## __VA_ARGS__)
+
+/* Frequency limits in MHz -- these are European values.  For Japanese
+devices, that would be 76000 and 91000.  */
+#define FREQ_MIN  87500U
+#define FREQ_MAX 108000U
+#define FREQ_MUL 16
+
+/* TEA5764 registers */
+#define TEA5764_MANID		0x002b
+#define TEA5764_CHIPID		0x5764
+
+#define TEA5764_INTREG_BLMSK	0x0001
+#define TEA5764_INTREG_FRRMSK	0x0002
+#define TEA5764_INTREG_LEVMSK	0x0008
+#define TEA5764_INTREG_IFMSK	0x0010
+#define TEA5764_INTREG_BLMFLAG	0x0100
+#define TEA5764_INTREG_FRRFLAG	0x0200
+#define TEA5764_INTREG_LEVFLAG	0x0800
+#define TEA5764_INTREG_IFFLAG	0x1000
+
+#define TEA5764_FRQSET_SUD	0x8000
+#define TEA5764_FRQSET_SM	0x4000
+
+#define TEA5764_TNCTRL_PUPD1	0x8000
+#define TEA5764_TNCTRL_PUPD0	0x4000
+#define TEA5764_TNCTRL_BLIM	0x2000
+#define TEA5764_TNCTRL_SWPM	0x1000
+#define TEA5764_TNCTRL_IFCTC	0x0800
+#define TEA5764_TNCTRL_AFM	0x0400
+#define TEA5764_TNCTRL_SMUTE	0x0200
+#define TEA5764_TNCTRL_SNC	0x0100
+#define TEA5764_TNCTRL_MU	0x0080
+#define TEA5764_TNCTRL_SSL1	0x0040
+#define TEA5764_TNCTRL_SSL0	0x0020
+#define TEA5764_TNCTRL_HLSI	0x0010
+#define TEA5764_TNCTRL_MST	0x0008
+#define TEA5764_TNCTRL_SWP	0x0004
+#define TEA5764_TNCTRL_DTC	0x0002
+#define TEA5764_TNCTRL_AHLSI	0x0001
+
+#define TEA5764_TUNCHK_LEVEL(x)	(((x) & 0x00F0) >> 4)
+#define TEA5764_TUNCHK_IFCNT(x) (((x) & 0xFE00) >> 9)
+#define TEA5764_TUNCHK_TUNTO	0x0100
+#define TEA5764_TUNCHK_LD	0x0008
+#define TEA5764_TUNCHK_STEREO	0x0004
+
+#define TEA5764_TESTREG_TRIGFR	0x0800
+
+struct tea5764_regs {
+	u16 intreg;				/* INTFLAG & INTMSK */
+	u16 frqset;				/* FRQSETMSB & FRQSETLSB */
+	u16 tnctrl;				/* TNCTRL1 & TNCTRL2 */
+	u16 frqchk;				/* FRQCHKMSB & FRQCHKLSB */
+	u16 tunchk;				/* IFCHK & LEVCHK */
+	u16 testreg;				/* TESTBITS & TESTMODE */
+	u16 rdsstat;				/* RDSSTAT1 & RDSSTAT2 */
+	u16 rdslb;				/* RDSLBMSB & RDSLBLSB */
+	u16 rdspb;				/* RDSPBMSB & RDSPBLSB */
+	u16 rdsbc;				/* RDSBBC & RDSGBC */
+	u16 rdsctrl;				/* RDSCTRL1 & RDSCTRL2 */
+	u16 rdsbbl;				/* PAUSEDET & RDSBBL */
+	u16 manid;				/* MANID1 & MANID2 */
+	u16 chipid;				/* CHIPID1 & CHIPID2 */
+} __attribute__ ((packed));
+
+struct tea5764_write_regs {
+	u8 intreg;				/* INTMSK */
+	__be16 frqset;				/* FRQSETMSB & FRQSETLSB */
+	__be16 tnctrl;				/* TNCTRL1 & TNCTRL2 */
+	__be16 testreg;				/* TESTBITS & TESTMODE */
+	__be16 rdsctrl;				/* RDSCTRL1 & RDSCTRL2 */
+	__be16 rdsbbl;				/* PAUSEDET & RDSBBL */
+} __attribute__ ((packed));
+
+#ifdef CONFIG_RADIO_TEA5764_XTAL
+#define RADIO_TEA5764_XTAL 1
+#else
+#define RADIO_TEA5764_XTAL 0
+#endif
+
+static int radio_nr = -1;
+static int use_xtal = RADIO_TEA5764_XTAL;
+
+struct tea5764_device {
+	struct v4l2_device		v4l2_dev;
+	struct v4l2_ctrl_handler	ctrl_handler;
+	struct i2c_client		*i2c_client;
+	struct video_device		vdev;
+	struct tea5764_regs		regs;
+	struct mutex			mutex;
+};
+
+/* I2C code related */
+static int tea5764_i2c_read(struct tea5764_device *radio)
+{
+	int i;
+	u16 *p = (u16 *) &radio->regs;
+
+	struct i2c_msg msgs[1] = {
+		{	.addr = radio->i2c_client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(radio->regs),
+			.buf = (void *)&radio->regs
+		},
+	};
+	if (i2c_transfer(radio->i2c_client->adapter, msgs, 1) != 1)
+		return -EIO;
+	for (i = 0; i < sizeof(struct tea5764_regs) / sizeof(u16); i++)
+		p[i] = __be16_to_cpu((__force __be16)p[i]);
+
+	return 0;
+}
+
+static int tea5764_i2c_write(struct tea5764_device *radio)
+{
+	struct tea5764_write_regs wr;
+	struct tea5764_regs *r = &radio->regs;
+	struct i2c_msg msgs[1] = {
+		{
+			.addr = radio->i2c_client->addr,
+			.len = sizeof(wr),
+			.buf = (void *)&wr
+		},
+	};
+	wr.intreg  = r->intreg & 0xff;
+	wr.frqset  = __cpu_to_be16(r->frqset);
+	wr.tnctrl  = __cpu_to_be16(r->tnctrl);
+	wr.testreg = __cpu_to_be16(r->testreg);
+	wr.rdsctrl = __cpu_to_be16(r->rdsctrl);
+	wr.rdsbbl  = __cpu_to_be16(r->rdsbbl);
+	if (i2c_transfer(radio->i2c_client->adapter, msgs, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static void tea5764_power_up(struct tea5764_device *radio)
+{
+	struct tea5764_regs *r = &radio->regs;
+
+	if (!(r->tnctrl & TEA5764_TNCTRL_PUPD0)) {
+		r->tnctrl &= ~(TEA5764_TNCTRL_AFM | TEA5764_TNCTRL_MU |
+			       TEA5764_TNCTRL_HLSI);
+		if (!use_xtal)
+			r->testreg |= TEA5764_TESTREG_TRIGFR;
+		else
+			r->testreg &= ~TEA5764_TESTREG_TRIGFR;
+
+		r->tnctrl |= TEA5764_TNCTRL_PUPD0;
+		tea5764_i2c_write(radio);
+	}
+}
+
+static void tea5764_power_down(struct tea5764_device *radio)
+{
+	struct tea5764_regs *r = &radio->regs;
+
+	if (r->tnctrl & TEA5764_TNCTRL_PUPD0) {
+		r->tnctrl &= ~TEA5764_TNCTRL_PUPD0;
+		tea5764_i2c_write(radio);
+	}
+}
+
+static void tea5764_set_freq(struct tea5764_device *radio, int freq)
+{
+	struct tea5764_regs *r = &radio->regs;
+
+	/* formula: (freq [+ or -] 225000) / 8192 */
+	if (r->tnctrl & TEA5764_TNCTRL_HLSI)
+		r->frqset = (freq + 225000) / 8192;
+	else
+		r->frqset = (freq - 225000) / 8192;
+}
+
+static int tea5764_get_freq(struct tea5764_device *radio)
+{
+	struct tea5764_regs *r = &radio->regs;
+
+	if (r->tnctrl & TEA5764_TNCTRL_HLSI)
+		return (r->frqchk * 8192) - 225000;
+	else
+		return (r->frqchk * 8192) + 225000;
+}
+
+/* tune an frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
+static void tea5764_tune(struct tea5764_device *radio, int freq)
+{
+	tea5764_set_freq(radio, freq);
+	if (tea5764_i2c_write(radio))
+		PWARN("Could not set frequency!");
+}
+
+static void tea5764_set_audout_mode(struct tea5764_device *radio, int audmode)
+{
+	struct tea5764_regs *r = &radio->regs;
+	int tnctrl = r->tnctrl;
+
+	if (audmode == V4L2_TUNER_MODE_MONO)
+		r->tnctrl |= TEA5764_TNCTRL_MST;
+	else
+		r->tnctrl &= ~TEA5764_TNCTRL_MST;
+	if (tnctrl != r->tnctrl)
+		tea5764_i2c_write(radio);
+}
+
+static int tea5764_get_audout_mode(struct tea5764_device *radio)
+{
+	struct tea5764_regs *r = &radio->regs;
+
+	if (r->tnctrl & TEA5764_TNCTRL_MST)
+		return V4L2_TUNER_MODE_MONO;
+	else
+		return V4L2_TUNER_MODE_STEREO;
+}
+
+static void tea5764_mute(struct tea5764_device *radio, int on)
+{
+	struct tea5764_regs *r = &radio->regs;
+	int tnctrl = r->tnctrl;
+
+	if (on)
+		r->tnctrl |= TEA5764_TNCTRL_MU;
+	else
+		r->tnctrl &= ~TEA5764_TNCTRL_MU;
+	if (tnctrl != r->tnctrl)
+		tea5764_i2c_write(radio);
+}
+
+/* V4L2 vidioc */
+static int vidioc_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *v)
+{
+	struct tea5764_device *radio = video_drvdata(file);
+	struct video_device *dev = &radio->vdev;
+
+	strscpy(v->driver, dev->dev.driver->name, sizeof(v->driver));
+	strscpy(v->card, dev->name, sizeof(v->card));
+	snprintf(v->bus_info, sizeof(v->bus_info),
+		 "I2C:%s", dev_name(&dev->dev));
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	struct tea5764_device *radio = video_drvdata(file);
+	struct tea5764_regs *r = &radio->regs;
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	tea5764_i2c_read(radio);
+	v->rangelow   = FREQ_MIN * FREQ_MUL;
+	v->rangehigh  = FREQ_MAX * FREQ_MUL;
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+	if (r->tunchk & TEA5764_TUNCHK_STEREO)
+		v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		v->rxsubchans = V4L2_TUNER_SUB_MONO;
+	v->audmode = tea5764_get_audout_mode(radio);
+	v->signal = TEA5764_TUNCHK_LEVEL(r->tunchk) * 0xffff / 0xf;
+	v->afc = TEA5764_TUNCHK_IFCNT(r->tunchk);
+
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *v)
+{
+	struct tea5764_device *radio = video_drvdata(file);
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	tea5764_set_audout_mode(radio, v->audmode);
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct tea5764_device *radio = video_drvdata(file);
+	unsigned freq = f->frequency;
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+	if (freq == 0) {
+		/* We special case this as a power down control. */
+		tea5764_power_down(radio);
+		/* Yes, that's what is returned in this case. This
+		   whole special case is non-compliant and should really
+		   be replaced with something better, but changing this
+		   might well break code that depends on this behavior.
+		   So we keep it as-is. */
+		return -EINVAL;
+	}
+	freq = clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);
+	tea5764_power_up(radio);
+	tea5764_tune(radio, (freq * 125) / 2);
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct tea5764_device *radio = video_drvdata(file);
+	struct tea5764_regs *r = &radio->regs;
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	tea5764_i2c_read(radio);
+	f->type = V4L2_TUNER_RADIO;
+	if (r->tnctrl & TEA5764_TNCTRL_PUPD0)
+		f->frequency = (tea5764_get_freq(radio) * 2) / 125;
+	else
+		f->frequency = 0;
+
+	return 0;
+}
+
+static int tea5764_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct tea5764_device *radio =
+		container_of(ctrl->handler, struct tea5764_device, ctrl_handler);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		tea5764_mute(radio, ctrl->val);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops tea5764_ctrl_ops = {
+	.s_ctrl = tea5764_s_ctrl,
+};
+
+/* File system interface */
+static const struct v4l2_file_operations tea5764_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/* V4L2 interface */
+static const struct video_device tea5764_radio_template = {
+	.name		= "TEA5764 FM-Radio",
+	.fops           = &tea5764_fops,
+	.ioctl_ops	= &tea5764_ioctl_ops,
+	.release	= video_device_release_empty,
+};
+
+/* I2C probe: check if the device exists and register with v4l if it is */
+static int tea5764_i2c_probe(struct i2c_client *client)
+{
+	struct tea5764_device *radio;
+	struct v4l2_device *v4l2_dev;
+	struct v4l2_ctrl_handler *hdl;
+	struct tea5764_regs *r;
+	int ret;
+
+	PDEBUG("probe");
+	radio = kzalloc_obj(struct tea5764_device);
+	if (!radio)
+		return -ENOMEM;
+
+	v4l2_dev = &radio->v4l2_dev;
+	ret = v4l2_device_register(&client->dev, v4l2_dev);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev, "could not register v4l2_device\n");
+		goto errfr;
+	}
+
+	hdl = &radio->ctrl_handler;
+	v4l2_ctrl_handler_init(hdl, 1);
+	v4l2_ctrl_new_std(hdl, &tea5764_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	v4l2_dev->ctrl_handler = hdl;
+	if (hdl->error) {
+		ret = hdl->error;
+		v4l2_err(v4l2_dev, "Could not register controls\n");
+		goto errunreg;
+	}
+
+	mutex_init(&radio->mutex);
+	radio->i2c_client = client;
+	ret = tea5764_i2c_read(radio);
+	if (ret)
+		goto errunreg;
+	r = &radio->regs;
+	PDEBUG("chipid = %04X, manid = %04X", r->chipid, r->manid);
+	if (r->chipid != TEA5764_CHIPID ||
+		(r->manid & 0x0fff) != TEA5764_MANID) {
+		PWARN("This chip is not a TEA5764!");
+		ret = -EINVAL;
+		goto errunreg;
+	}
+
+	radio->vdev = tea5764_radio_template;
+
+	i2c_set_clientdata(client, radio);
+	video_set_drvdata(&radio->vdev, radio);
+	radio->vdev.lock = &radio->mutex;
+	radio->vdev.v4l2_dev = v4l2_dev;
+	radio->vdev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+
+	/* initialize and power off the chip */
+	tea5764_i2c_read(radio);
+	tea5764_set_audout_mode(radio, V4L2_TUNER_MODE_STEREO);
+	tea5764_mute(radio, 1);
+	tea5764_power_down(radio);
+
+	ret = video_register_device(&radio->vdev, VFL_TYPE_RADIO, radio_nr);
+	if (ret < 0) {
+		PWARN("Could not register video device!");
+		goto errunreg;
+	}
+
+	PINFO("registered.");
+	return 0;
+errunreg:
+	v4l2_ctrl_handler_free(hdl);
+	v4l2_device_unregister(v4l2_dev);
+errfr:
+	kfree(radio);
+	return ret;
+}
+
+static void tea5764_i2c_remove(struct i2c_client *client)
+{
+	struct tea5764_device *radio = i2c_get_clientdata(client);
+
+	PDEBUG("remove");
+	if (radio) {
+		tea5764_power_down(radio);
+		video_unregister_device(&radio->vdev);
+		v4l2_ctrl_handler_free(&radio->ctrl_handler);
+		v4l2_device_unregister(&radio->v4l2_dev);
+		kfree(radio);
+	}
+}
+
+/* I2C subsystem interface */
+static const struct i2c_device_id tea5764_id[] = {
+	{ .name = "radio-tea5764" },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(i2c, tea5764_id);
+
+static struct i2c_driver tea5764_i2c_driver = {
+	.driver = {
+		.name = "radio-tea5764",
+	},
+	.probe = tea5764_i2c_probe,
+	.remove = tea5764_i2c_remove,
+	.id_table = tea5764_id,
+};
+
+module_i2c_driver(tea5764_i2c_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
+
+module_param(use_xtal, int, 0);
+MODULE_PARM_DESC(use_xtal, "Chip have a xtal connected in board");
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr, "video4linux device number to use");
diff --git a/drivers/media/radio/radio-tea5777.c b/drivers/media/radio/radio-tea5777.c
new file mode 100644
index 000000000..fb9de7bbc
--- /dev/null
+++ b/drivers/media/radio/radio-tea5777.c
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *   v4l2 driver for TEA5777 Philips AM/FM radio tuner chips
+ *
+ *	Copyright (c) 2012 Hans de Goede <hdegoede@redhat.com>
+ *
+ *   Based on the ALSA driver for TEA5757/5759 Philips AM/FM radio tuner chips:
+ *
+ *	Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include "radio-tea5777.h"
+
+MODULE_AUTHOR("Hans de Goede <perex@perex.cz>");
+MODULE_DESCRIPTION("Routines for control of TEA5777 Philips AM/FM radio tuner chips");
+MODULE_LICENSE("GPL");
+
+#define TEA5777_FM_IF			150 /* kHz */
+#define TEA5777_FM_FREQ_STEP		50  /* kHz */
+
+#define TEA5777_AM_IF			21  /* kHz */
+#define TEA5777_AM_FREQ_STEP		1   /* kHz */
+
+/* Write reg, common bits */
+#define TEA5777_W_MUTE_MASK		(1LL << 47)
+#define TEA5777_W_MUTE_SHIFT		47
+#define TEA5777_W_AM_FM_MASK		(1LL << 46)
+#define TEA5777_W_AM_FM_SHIFT		46
+#define TEA5777_W_STB_MASK		(1LL << 45)
+#define TEA5777_W_STB_SHIFT		45
+
+#define TEA5777_W_IFCE_MASK		(1LL << 29)
+#define TEA5777_W_IFCE_SHIFT		29
+#define TEA5777_W_IFW_MASK		(1LL << 28)
+#define TEA5777_W_IFW_SHIFT		28
+#define TEA5777_W_HILO_MASK		(1LL << 27)
+#define TEA5777_W_HILO_SHIFT		27
+#define TEA5777_W_DBUS_MASK		(1LL << 26)
+#define TEA5777_W_DBUS_SHIFT		26
+
+#define TEA5777_W_INTEXT_MASK		(1LL << 24)
+#define TEA5777_W_INTEXT_SHIFT		24
+#define TEA5777_W_P1_MASK		(1LL << 23)
+#define TEA5777_W_P1_SHIFT		23
+#define TEA5777_W_P0_MASK		(1LL << 22)
+#define TEA5777_W_P0_SHIFT		22
+#define TEA5777_W_PEN1_MASK		(1LL << 21)
+#define TEA5777_W_PEN1_SHIFT		21
+#define TEA5777_W_PEN0_MASK		(1LL << 20)
+#define TEA5777_W_PEN0_SHIFT		20
+
+#define TEA5777_W_CHP0_MASK		(1LL << 18)
+#define TEA5777_W_CHP0_SHIFT		18
+#define TEA5777_W_DEEM_MASK		(1LL << 17)
+#define TEA5777_W_DEEM_SHIFT		17
+
+#define TEA5777_W_SEARCH_MASK		(1LL << 7)
+#define TEA5777_W_SEARCH_SHIFT		7
+#define TEA5777_W_PROGBLIM_MASK		(1LL << 6)
+#define TEA5777_W_PROGBLIM_SHIFT	6
+#define TEA5777_W_UPDWN_MASK		(1LL << 5)
+#define TEA5777_W_UPDWN_SHIFT		5
+#define TEA5777_W_SLEV_MASK		(3LL << 3)
+#define TEA5777_W_SLEV_SHIFT		3
+
+/* Write reg, FM specific bits */
+#define TEA5777_W_FM_PLL_MASK		(0x1fffLL << 32)
+#define TEA5777_W_FM_PLL_SHIFT		32
+#define TEA5777_W_FM_FREF_MASK		(0x03LL << 30)
+#define TEA5777_W_FM_FREF_SHIFT		30
+#define TEA5777_W_FM_FREF_VALUE		0LL /* 50k steps, 150k IF */
+
+#define TEA5777_W_FM_FORCEMONO_MASK	(1LL << 15)
+#define TEA5777_W_FM_FORCEMONO_SHIFT	15
+#define TEA5777_W_FM_SDSOFF_MASK	(1LL << 14)
+#define TEA5777_W_FM_SDSOFF_SHIFT	14
+#define TEA5777_W_FM_DOFF_MASK		(1LL << 13)
+#define TEA5777_W_FM_DOFF_SHIFT		13
+
+#define TEA5777_W_FM_STEP_MASK		(3LL << 1)
+#define TEA5777_W_FM_STEP_SHIFT		1
+
+/* Write reg, AM specific bits */
+#define TEA5777_W_AM_PLL_MASK		(0x7ffLL << 34)
+#define TEA5777_W_AM_PLL_SHIFT		34
+#define TEA5777_W_AM_AGCRF_MASK		(1LL << 33)
+#define TEA5777_W_AM_AGCRF_SHIFT	33
+#define TEA5777_W_AM_AGCIF_MASK		(1LL << 32)
+#define TEA5777_W_AM_AGCIF_SHIFT	32
+#define TEA5777_W_AM_MWLW_MASK		(1LL << 31)
+#define TEA5777_W_AM_MWLW_SHIFT		31
+#define TEA5777_W_AM_LW			0LL
+#define TEA5777_W_AM_MW			1LL
+#define TEA5777_W_AM_LNA_MASK		(1LL << 30)
+#define TEA5777_W_AM_LNA_SHIFT		30
+
+#define TEA5777_W_AM_PEAK_MASK		(1LL << 25)
+#define TEA5777_W_AM_PEAK_SHIFT		25
+
+#define TEA5777_W_AM_RFB_MASK		(1LL << 16)
+#define TEA5777_W_AM_RFB_SHIFT		16
+#define TEA5777_W_AM_CALLIGN_MASK	(1LL << 15)
+#define TEA5777_W_AM_CALLIGN_SHIFT	15
+#define TEA5777_W_AM_CBANK_MASK		(0x7fLL << 8)
+#define TEA5777_W_AM_CBANK_SHIFT	8
+
+#define TEA5777_W_AM_DELAY_MASK		(1LL << 2)
+#define TEA5777_W_AM_DELAY_SHIFT	2
+#define TEA5777_W_AM_STEP_MASK		(1LL << 1)
+#define TEA5777_W_AM_STEP_SHIFT		1
+
+/* Read reg, common bits */
+#define TEA5777_R_LEVEL_MASK		(0x0f << 17)
+#define TEA5777_R_LEVEL_SHIFT		17
+#define TEA5777_R_SFOUND_MASK		(0x01 << 16)
+#define TEA5777_R_SFOUND_SHIFT		16
+#define TEA5777_R_BLIM_MASK		(0x01 << 15)
+#define TEA5777_R_BLIM_SHIFT		15
+
+/* Read reg, FM specific bits */
+#define TEA5777_R_FM_STEREO_MASK	(0x01 << 21)
+#define TEA5777_R_FM_STEREO_SHIFT	21
+#define TEA5777_R_FM_PLL_MASK		0x1fff
+#define TEA5777_R_FM_PLL_SHIFT		0
+
+enum { BAND_FM, BAND_AM };
+
+static const struct v4l2_frequency_band bands[] = {
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			      V4L2_TUNER_CAP_FREQ_BANDS |
+			      V4L2_TUNER_CAP_HWSEEK_BOUNDED |
+			      V4L2_TUNER_CAP_HWSEEK_PROG_LIM,
+		.rangelow   =  76000 * 16,
+		.rangehigh  = 108000 * 16,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 1,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS |
+			      V4L2_TUNER_CAP_HWSEEK_BOUNDED |
+			      V4L2_TUNER_CAP_HWSEEK_PROG_LIM,
+		.rangelow   =  530 * 16,
+		.rangehigh  = 1710 * 16,
+		.modulation = V4L2_BAND_MODULATION_AM,
+	},
+};
+
+static u32 tea5777_freq_to_v4l2_freq(struct radio_tea5777 *tea, u32 freq)
+{
+	switch (tea->band) {
+	case BAND_FM:
+		return (freq * TEA5777_FM_FREQ_STEP + TEA5777_FM_IF) * 16;
+	case BAND_AM:
+		return (freq * TEA5777_AM_FREQ_STEP + TEA5777_AM_IF) * 16;
+	}
+	return 0; /* Never reached */
+}
+
+int radio_tea5777_set_freq(struct radio_tea5777 *tea)
+{
+	u32 freq;
+	int res;
+
+	freq = clamp(tea->freq, bands[tea->band].rangelow,
+				bands[tea->band].rangehigh);
+	freq = (freq + 8) / 16; /* to kHz */
+
+	switch (tea->band) {
+	case BAND_FM:
+		tea->write_reg &= ~TEA5777_W_AM_FM_MASK;
+		freq = (freq - TEA5777_FM_IF) / TEA5777_FM_FREQ_STEP;
+		tea->write_reg &= ~TEA5777_W_FM_PLL_MASK;
+		tea->write_reg |= (u64)freq << TEA5777_W_FM_PLL_SHIFT;
+		tea->write_reg &= ~TEA5777_W_FM_FREF_MASK;
+		tea->write_reg |= TEA5777_W_FM_FREF_VALUE <<
+				  TEA5777_W_FM_FREF_SHIFT;
+		tea->write_reg &= ~TEA5777_W_FM_FORCEMONO_MASK;
+		if (tea->audmode == V4L2_TUNER_MODE_MONO)
+			tea->write_reg |= 1LL << TEA5777_W_FM_FORCEMONO_SHIFT;
+		break;
+	case BAND_AM:
+		tea->write_reg &= ~TEA5777_W_AM_FM_MASK;
+		tea->write_reg |= (1LL << TEA5777_W_AM_FM_SHIFT);
+		freq = (freq - TEA5777_AM_IF) / TEA5777_AM_FREQ_STEP;
+		tea->write_reg &= ~TEA5777_W_AM_PLL_MASK;
+		tea->write_reg |= (u64)freq << TEA5777_W_AM_PLL_SHIFT;
+		tea->write_reg &= ~TEA5777_W_AM_AGCRF_MASK;
+		tea->write_reg &= ~TEA5777_W_AM_AGCRF_MASK;
+		tea->write_reg &= ~TEA5777_W_AM_MWLW_MASK;
+		tea->write_reg |= TEA5777_W_AM_MW << TEA5777_W_AM_MWLW_SHIFT;
+		tea->write_reg &= ~TEA5777_W_AM_LNA_MASK;
+		tea->write_reg |= 1LL << TEA5777_W_AM_LNA_SHIFT;
+		tea->write_reg &= ~TEA5777_W_AM_PEAK_MASK;
+		tea->write_reg |= 1LL << TEA5777_W_AM_PEAK_SHIFT;
+		tea->write_reg &= ~TEA5777_W_AM_CALLIGN_MASK;
+		break;
+	}
+
+	res = tea->ops->write_reg(tea, tea->write_reg);
+	if (res)
+		return res;
+
+	tea->needs_write = false;
+	tea->read_reg = -1;
+	tea->freq = tea5777_freq_to_v4l2_freq(tea, freq);
+
+	return 0;
+}
+
+static int radio_tea5777_update_read_reg(struct radio_tea5777 *tea, int wait)
+{
+	int res;
+
+	if (tea->read_reg != -1)
+		return 0;
+
+	if (tea->write_before_read && tea->needs_write) {
+		res = radio_tea5777_set_freq(tea);
+		if (res)
+			return res;
+	}
+
+	if (wait) {
+		if (schedule_timeout_interruptible(msecs_to_jiffies(wait)))
+			return -ERESTARTSYS;
+	}
+
+	res = tea->ops->read_reg(tea, &tea->read_reg);
+	if (res)
+		return res;
+
+	tea->needs_write = true;
+	return 0;
+}
+
+/*
+ * Linux Video interface
+ */
+
+static int vidioc_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *v)
+{
+	struct radio_tea5777 *tea = video_drvdata(file);
+
+	strscpy(v->driver, tea->v4l2_dev->name, sizeof(v->driver));
+	strscpy(v->card, tea->card, sizeof(v->card));
+	strlcat(v->card, " TEA5777", sizeof(v->card));
+	strscpy(v->bus_info, tea->bus_info, sizeof(v->bus_info));
+	return 0;
+}
+
+static int vidioc_enum_freq_bands(struct file *file, void *priv,
+					 struct v4l2_frequency_band *band)
+{
+	struct radio_tea5777 *tea = video_drvdata(file);
+
+	if (band->tuner != 0 || band->index >= ARRAY_SIZE(bands) ||
+	    (!tea->has_am && band->index == BAND_AM))
+		return -EINVAL;
+
+	*band = bands[band->index];
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+					struct v4l2_tuner *v)
+{
+	struct radio_tea5777 *tea = video_drvdata(file);
+	int res;
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	res = radio_tea5777_update_read_reg(tea, 0);
+	if (res)
+		return res;
+
+	memset(v, 0, sizeof(*v));
+	if (tea->has_am)
+		strscpy(v->name, "AM/FM", sizeof(v->name));
+	else
+		strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			V4L2_TUNER_CAP_FREQ_BANDS |
+			V4L2_TUNER_CAP_HWSEEK_BOUNDED |
+			V4L2_TUNER_CAP_HWSEEK_PROG_LIM;
+	v->rangelow   = tea->has_am ? bands[BAND_AM].rangelow :
+				      bands[BAND_FM].rangelow;
+	v->rangehigh  = bands[BAND_FM].rangehigh;
+	if (tea->band == BAND_FM &&
+			(tea->read_reg & TEA5777_R_FM_STEREO_MASK))
+		v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		v->rxsubchans = V4L2_TUNER_SUB_MONO;
+	v->audmode = tea->audmode;
+	/* shift - 12 to convert 4-bits (0-15) scale to 16-bits (0-65535) */
+	v->signal = (tea->read_reg & TEA5777_R_LEVEL_MASK) >>
+		    (TEA5777_R_LEVEL_SHIFT - 12);
+
+	/* Invalidate read_reg, so that next call we return up2date signal */
+	tea->read_reg = -1;
+
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+					const struct v4l2_tuner *v)
+{
+	struct radio_tea5777 *tea = video_drvdata(file);
+	u32 orig_audmode = tea->audmode;
+
+	if (v->index)
+		return -EINVAL;
+
+	tea->audmode = v->audmode;
+	if (tea->audmode > V4L2_TUNER_MODE_STEREO)
+		tea->audmode = V4L2_TUNER_MODE_STEREO;
+
+	if (tea->audmode != orig_audmode && tea->band == BAND_FM)
+		return radio_tea5777_set_freq(tea);
+
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+					struct v4l2_frequency *f)
+{
+	struct radio_tea5777 *tea = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = tea->freq;
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+					const struct v4l2_frequency *f)
+{
+	struct radio_tea5777 *tea = video_drvdata(file);
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	if (tea->has_am && f->frequency < (20000 * 16))
+		tea->band = BAND_AM;
+	else
+		tea->band = BAND_FM;
+
+	tea->freq = f->frequency;
+	return radio_tea5777_set_freq(tea);
+}
+
+static int vidioc_s_hw_freq_seek(struct file *file, void *fh,
+					const struct v4l2_hw_freq_seek *a)
+{
+	struct radio_tea5777 *tea = video_drvdata(file);
+	unsigned long timeout;
+	u32 rangelow = a->rangelow;
+	u32 rangehigh = a->rangehigh;
+	int i, res, spacing;
+	u32 orig_freq;
+
+	if (a->tuner || a->wrap_around)
+		return -EINVAL;
+
+	if (file->f_flags & O_NONBLOCK)
+		return -EWOULDBLOCK;
+
+	if (rangelow || rangehigh) {
+		for (i = 0; i < ARRAY_SIZE(bands); i++) {
+			if (i == BAND_AM && !tea->has_am)
+				continue;
+			if (bands[i].rangelow  >= rangelow &&
+			    bands[i].rangehigh <= rangehigh)
+				break;
+		}
+		if (i == ARRAY_SIZE(bands))
+			return -EINVAL; /* No matching band found */
+
+		tea->band = i;
+		if (tea->freq < rangelow || tea->freq > rangehigh) {
+			tea->freq = clamp(tea->freq, rangelow,
+						     rangehigh);
+			res = radio_tea5777_set_freq(tea);
+			if (res)
+				return res;
+		}
+	} else {
+		rangelow  = bands[tea->band].rangelow;
+		rangehigh = bands[tea->band].rangehigh;
+	}
+
+	spacing   = (tea->band == BAND_AM) ? (5 * 16) : (200 * 16); /* kHz */
+	orig_freq = tea->freq;
+
+	tea->write_reg |= TEA5777_W_PROGBLIM_MASK;
+	if (tea->seek_rangelow != rangelow) {
+		tea->write_reg &= ~TEA5777_W_UPDWN_MASK;
+		tea->freq = rangelow;
+		res = radio_tea5777_set_freq(tea);
+		if (res)
+			goto leave;
+		tea->seek_rangelow = rangelow;
+	}
+	if (tea->seek_rangehigh != rangehigh) {
+		tea->write_reg |= TEA5777_W_UPDWN_MASK;
+		tea->freq = rangehigh;
+		res = radio_tea5777_set_freq(tea);
+		if (res)
+			goto leave;
+		tea->seek_rangehigh = rangehigh;
+	}
+	tea->write_reg &= ~TEA5777_W_PROGBLIM_MASK;
+
+	tea->write_reg |= TEA5777_W_SEARCH_MASK;
+	if (a->seek_upward) {
+		tea->write_reg |= TEA5777_W_UPDWN_MASK;
+		tea->freq = orig_freq + spacing;
+	} else {
+		tea->write_reg &= ~TEA5777_W_UPDWN_MASK;
+		tea->freq = orig_freq - spacing;
+	}
+	res = radio_tea5777_set_freq(tea);
+	if (res)
+		goto leave;
+
+	timeout = jiffies + msecs_to_jiffies(5000);
+	for (;;) {
+		if (time_after(jiffies, timeout)) {
+			res = -ENODATA;
+			break;
+		}
+
+		res = radio_tea5777_update_read_reg(tea, 100);
+		if (res)
+			break;
+
+		/*
+		 * Note we use tea->freq to track how far we've searched sofar
+		 * this is necessary to ensure we continue seeking at the right
+		 * point, in the write_before_read case.
+		 */
+		tea->freq = (tea->read_reg & TEA5777_R_FM_PLL_MASK);
+		tea->freq = tea5777_freq_to_v4l2_freq(tea, tea->freq);
+
+		if ((tea->read_reg & TEA5777_R_SFOUND_MASK)) {
+			tea->write_reg &= ~TEA5777_W_SEARCH_MASK;
+			return 0;
+		}
+
+		if (tea->read_reg & TEA5777_R_BLIM_MASK) {
+			res = -ENODATA;
+			break;
+		}
+
+		/* Force read_reg update */
+		tea->read_reg = -1;
+	}
+leave:
+	tea->write_reg &= ~TEA5777_W_PROGBLIM_MASK;
+	tea->write_reg &= ~TEA5777_W_SEARCH_MASK;
+	tea->freq = orig_freq;
+	radio_tea5777_set_freq(tea);
+	return res;
+}
+
+static int tea575x_s_ctrl(struct v4l2_ctrl *c)
+{
+	struct radio_tea5777 *tea =
+		container_of(c->handler, struct radio_tea5777, ctrl_handler);
+
+	switch (c->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (c->val)
+			tea->write_reg |= TEA5777_W_MUTE_MASK;
+		else
+			tea->write_reg &= ~TEA5777_W_MUTE_MASK;
+
+		return radio_tea5777_set_freq(tea);
+	}
+
+	return -EINVAL;
+}
+
+static const struct v4l2_file_operations tea575x_fops = {
+	.unlocked_ioctl	= video_ioctl2,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+};
+
+static const struct v4l2_ioctl_ops tea575x_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_s_hw_freq_seek = vidioc_s_hw_freq_seek,
+	.vidioc_enum_freq_bands = vidioc_enum_freq_bands,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct video_device tea575x_radio = {
+	.ioctl_ops	= &tea575x_ioctl_ops,
+	.release	= video_device_release_empty,
+};
+
+static const struct v4l2_ctrl_ops tea575x_ctrl_ops = {
+	.s_ctrl = tea575x_s_ctrl,
+};
+
+int radio_tea5777_init(struct radio_tea5777 *tea, struct module *owner)
+{
+	int res;
+
+	tea->write_reg = (1LL << TEA5777_W_IFCE_SHIFT) |
+			 (1LL << TEA5777_W_IFW_SHIFT) |
+			 (1LL << TEA5777_W_INTEXT_SHIFT) |
+			 (1LL << TEA5777_W_CHP0_SHIFT) |
+			 (1LL << TEA5777_W_SLEV_SHIFT);
+	tea->freq = 90500 * 16;	/* 90.5Mhz default */
+	tea->audmode = V4L2_TUNER_MODE_STEREO;
+	res = radio_tea5777_set_freq(tea);
+	if (res) {
+		v4l2_err(tea->v4l2_dev, "can't set initial freq (%d)\n", res);
+		return res;
+	}
+
+	tea->vd = tea575x_radio;
+	video_set_drvdata(&tea->vd, tea);
+	mutex_init(&tea->mutex);
+	strscpy(tea->vd.name, tea->v4l2_dev->name, sizeof(tea->vd.name));
+	tea->vd.lock = &tea->mutex;
+	tea->vd.v4l2_dev = tea->v4l2_dev;
+	tea->vd.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO |
+			      V4L2_CAP_HW_FREQ_SEEK;
+	tea->fops = tea575x_fops;
+	tea->fops.owner = owner;
+	tea->vd.fops = &tea->fops;
+
+	tea->vd.ctrl_handler = &tea->ctrl_handler;
+	v4l2_ctrl_handler_init(&tea->ctrl_handler, 1);
+	v4l2_ctrl_new_std(&tea->ctrl_handler, &tea575x_ctrl_ops,
+			  V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	res = tea->ctrl_handler.error;
+	if (res) {
+		v4l2_err(tea->v4l2_dev, "can't initialize controls\n");
+		v4l2_ctrl_handler_free(&tea->ctrl_handler);
+		return res;
+	}
+	v4l2_ctrl_handler_setup(&tea->ctrl_handler);
+
+	res = video_register_device(&tea->vd, VFL_TYPE_RADIO, -1);
+	if (res) {
+		v4l2_err(tea->v4l2_dev, "can't register video device!\n");
+		v4l2_ctrl_handler_free(tea->vd.ctrl_handler);
+		return res;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(radio_tea5777_init);
+
+void radio_tea5777_exit(struct radio_tea5777 *tea)
+{
+	video_unregister_device(&tea->vd);
+	v4l2_ctrl_handler_free(tea->vd.ctrl_handler);
+}
+EXPORT_SYMBOL_GPL(radio_tea5777_exit);
diff --git a/drivers/media/radio/radio-tea5777.h b/drivers/media/radio/radio-tea5777.h
new file mode 100644
index 000000000..33470a046
--- /dev/null
+++ b/drivers/media/radio/radio-tea5777.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __RADIO_TEA5777_H
+#define __RADIO_TEA5777_H
+
+/*
+ *   v4l2 driver for TEA5777 Philips AM/FM radio tuner chips
+ *
+ *	Copyright (c) 2012 Hans de Goede <hdegoede@redhat.com>
+ *
+ *   Based on the ALSA driver for TEA5757/5759 Philips AM/FM radio tuner chips:
+ *
+ *	Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
+ *	Copyright (c) 2012 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+
+#define TEA575X_FMIF	10700
+#define TEA575X_AMIF	  450
+
+struct radio_tea5777;
+
+struct radio_tea5777_ops {
+	/*
+	 * Write the 6 bytes large write register of the tea5777
+	 *
+	 * val represents the 6 write registers, with byte 1 from the
+	 * datasheet being the most significant byte (so byte 5 of the u64),
+	 * and byte 6 from the datasheet being the least significant byte.
+	 *
+	 * returns 0 on success.
+	 */
+	int (*write_reg)(struct radio_tea5777 *tea, u64 val);
+	/*
+	 * Read the 3 bytes large read register of the tea5777
+	 *
+	 * The read value gets returned in val, akin to write_reg, byte 1 from
+	 * the datasheet is stored as the most significant byte (so byte 2 of
+	 * the u32), and byte 3 from the datasheet gets stored as the least
+	 * significant byte (iow byte 0 of the u32).
+	 *
+	 * returns 0 on success.
+	 */
+	int (*read_reg)(struct radio_tea5777 *tea, u32 *val);
+};
+
+struct radio_tea5777 {
+	struct v4l2_device *v4l2_dev;
+	struct v4l2_file_operations fops;
+	struct video_device vd;		/* video device */
+	bool has_am;			/* Device can tune to AM freqs */
+	bool write_before_read;		/* must write before read quirk */
+	bool needs_write;		/* for write before read quirk */
+	u32 band;			/* current band */
+	u32 freq;			/* current frequency */
+	u32 audmode;			/* last set audmode */
+	u32 seek_rangelow;		/* current hwseek limits */
+	u32 seek_rangehigh;
+	u32 read_reg;
+	u64 write_reg;
+	struct mutex mutex;
+	const struct radio_tea5777_ops *ops;
+	void *private_data;
+	u8 card[32];
+	u8 bus_info[32];
+	struct v4l2_ctrl_handler ctrl_handler;
+};
+
+int radio_tea5777_init(struct radio_tea5777 *tea, struct module *owner);
+void radio_tea5777_exit(struct radio_tea5777 *tea);
+int radio_tea5777_set_freq(struct radio_tea5777 *tea);
+
+#endif /* __RADIO_TEA5777_H */
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
new file mode 100644
index 000000000..9231a19d5
--- /dev/null
+++ b/drivers/media/radio/radio-terratec.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Terratec ActiveRadio ISA Standalone card driver for Linux radio support
+ * (c) 1999 R. Offermanns (rolf@offermanns.de)
+ * based on the aimslab radio driver from M. Kirkwood
+ * many thanks to Michael Becker and Friedhelm Birth (from TerraTec)
+ *
+ *
+ * History:
+ * 1999-05-21	First preview release
+ *
+ *  Notes on the hardware:
+ *  There are two "main" chips on the card:
+ *  - Philips OM5610 (http://www-us.semiconductors.philips.com/acrobat/datasheets/OM5610_2.pdf)
+ *  - Philips SAA6588 (http://www-us.semiconductors.philips.com/acrobat/datasheets/SAA6588_1.pdf)
+ *  (you can get the datasheet at the above links)
+ *
+ *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
+ *  Volume Control is done digitally
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hverkuil@kernel.org>
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
+ */
+
+#include <linux/module.h>	/* Modules			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/videodev2.h>	/* kernel radio structs		*/
+#include <linux/mutex.h>
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include "radio-isa.h"
+
+MODULE_AUTHOR("R. Offermans & others");
+MODULE_DESCRIPTION("A driver for the TerraTec ActiveRadio Standalone radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.99");
+
+/* Note: there seems to be only one possible port (0x590), but without
+   hardware this is hard to verify. For now, this is the only one we will
+   support. */
+static int io = 0x590;
+static int radio_nr = -1;
+
+module_param(radio_nr, int, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device number");
+
+#define WRT_DIS		0x00
+#define CLK_OFF		0x00
+#define IIC_DATA	0x01
+#define IIC_CLK		0x02
+#define DATA		0x04
+#define CLK_ON		0x08
+#define WRT_EN		0x10
+
+static struct radio_isa_card *terratec_alloc(void)
+{
+	return kzalloc_obj(struct radio_isa_card);
+}
+
+static int terratec_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	int i;
+
+	if (mute)
+		vol = 0;
+	vol = vol + (vol * 32); /* change both channels */
+	for (i = 0; i < 8; i++) {
+		if (vol & (0x80 >> i))
+			outb(0x80, isa->io + 1);
+		else
+			outb(0x00, isa->io + 1);
+	}
+	return 0;
+}
+
+
+/* this is the worst part in this driver */
+/* many more or less strange things are going on here, but hey, it works :) */
+
+static int terratec_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	int i;
+	int temp;
+	long rest;
+	unsigned char buffer[25];		/* we have to bit shift 25 registers */
+
+	freq = freq / 160;			/* convert the freq. to a nice to handle value */
+	memset(buffer, 0, sizeof(buffer));
+
+	rest = freq * 10 + 10700;	/* I once had understood what is going on here */
+					/* maybe some wise guy (friedhelm?) can comment this stuff */
+	i = 13;
+	temp = 102400;
+	while (rest != 0) {
+		if (rest % temp  == rest)
+			buffer[i] = 0;
+		else {
+			buffer[i] = 1;
+			rest = rest - temp;
+		}
+		i--;
+		temp = temp / 2;
+	}
+
+	for (i = 24; i > -1; i--) {	/* bit shift the values to the radiocard */
+		if (buffer[i] == 1) {
+			outb(WRT_EN | DATA, isa->io);
+			outb(WRT_EN | DATA | CLK_ON, isa->io);
+			outb(WRT_EN | DATA, isa->io);
+		} else {
+			outb(WRT_EN | 0x00, isa->io);
+			outb(WRT_EN | 0x00 | CLK_ON, isa->io);
+		}
+	}
+	outb(0x00, isa->io);
+	return 0;
+}
+
+static u32 terratec_g_signal(struct radio_isa_card *isa)
+{
+	/* bit set = no signal present	*/
+	return (inb(isa->io) & 2) ? 0 : 0xffff;
+}
+
+static const struct radio_isa_ops terratec_ops = {
+	.alloc = terratec_alloc,
+	.s_mute_volume = terratec_s_mute_volume,
+	.s_frequency = terratec_s_frequency,
+	.g_signal = terratec_g_signal,
+};
+
+static const int terratec_ioports[] = { 0x590 };
+
+static struct radio_isa_driver terratec_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-terratec",
+		},
+	},
+	.io_params = &io,
+	.radio_nr_params = &radio_nr,
+	.io_ports = terratec_ioports,
+	.num_of_io_ports = ARRAY_SIZE(terratec_ioports),
+	.region_size = 2,
+	.card = "TerraTec ActiveRadio",
+	.ops = &terratec_ops,
+	.has_stereo = true,
+	.max_volume = 10,
+};
+
+static int __init terratec_init(void)
+{
+	return isa_register_driver(&terratec_driver.driver, 1);
+}
+
+static void __exit terratec_exit(void)
+{
+	isa_unregister_driver(&terratec_driver.driver);
+}
+
+module_init(terratec_init);
+module_exit(terratec_exit);
+
diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c
new file mode 100644
index 000000000..a6069b106
--- /dev/null
+++ b/drivers/media/radio/radio-timb.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * radio-timb.c Timberdale FPGA Radio driver
+ * Copyright (c) 2009 Intel Corporation
+ */
+
+#include <linux/io.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_data/media/timb_radio.h>
+
+#define DRIVER_NAME "timb-radio"
+
+struct timbradio {
+	struct timb_radio_platform_data	pdata;
+	struct v4l2_subdev	*sd_tuner;
+	struct v4l2_subdev	*sd_dsp;
+	struct video_device	video_dev;
+	struct v4l2_device	v4l2_dev;
+	struct mutex		lock;
+};
+
+
+static int timbradio_vidioc_querycap(struct file *file, void  *priv,
+	struct v4l2_capability *v)
+{
+	strscpy(v->driver, DRIVER_NAME, sizeof(v->driver));
+	strscpy(v->card, "Timberdale Radio", sizeof(v->card));
+	snprintf(v->bus_info, sizeof(v->bus_info), "platform:"DRIVER_NAME);
+	return 0;
+}
+
+static int timbradio_vidioc_g_tuner(struct file *file, void *priv,
+	struct v4l2_tuner *v)
+{
+	struct timbradio *tr = video_drvdata(file);
+	return v4l2_subdev_call(tr->sd_tuner, tuner, g_tuner, v);
+}
+
+static int timbradio_vidioc_s_tuner(struct file *file, void *priv,
+	const struct v4l2_tuner *v)
+{
+	struct timbradio *tr = video_drvdata(file);
+	return v4l2_subdev_call(tr->sd_tuner, tuner, s_tuner, v);
+}
+
+static int timbradio_vidioc_s_frequency(struct file *file, void *priv,
+	const struct v4l2_frequency *f)
+{
+	struct timbradio *tr = video_drvdata(file);
+	return v4l2_subdev_call(tr->sd_tuner, tuner, s_frequency, f);
+}
+
+static int timbradio_vidioc_g_frequency(struct file *file, void *priv,
+	struct v4l2_frequency *f)
+{
+	struct timbradio *tr = video_drvdata(file);
+	return v4l2_subdev_call(tr->sd_tuner, tuner, g_frequency, f);
+}
+
+static const struct v4l2_ioctl_ops timbradio_ioctl_ops = {
+	.vidioc_querycap	= timbradio_vidioc_querycap,
+	.vidioc_g_tuner		= timbradio_vidioc_g_tuner,
+	.vidioc_s_tuner		= timbradio_vidioc_s_tuner,
+	.vidioc_g_frequency	= timbradio_vidioc_g_frequency,
+	.vidioc_s_frequency	= timbradio_vidioc_s_frequency,
+	.vidioc_log_status      = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct v4l2_file_operations timbradio_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static int timbradio_probe(struct platform_device *pdev)
+{
+	struct timb_radio_platform_data *pdata = pdev->dev.platform_data;
+	struct timbradio *tr;
+	int err;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Platform data missing\n");
+		err = -EINVAL;
+		goto err;
+	}
+
+	tr = devm_kzalloc(&pdev->dev, sizeof(*tr), GFP_KERNEL);
+	if (!tr) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	tr->pdata = *pdata;
+	mutex_init(&tr->lock);
+
+	strscpy(tr->video_dev.name, "Timberdale Radio",
+		sizeof(tr->video_dev.name));
+	tr->video_dev.fops = &timbradio_fops;
+	tr->video_dev.ioctl_ops = &timbradio_ioctl_ops;
+	tr->video_dev.release = video_device_release_empty;
+	tr->video_dev.minor = -1;
+	tr->video_dev.lock = &tr->lock;
+	tr->video_dev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+
+	strscpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name));
+	err = v4l2_device_register(NULL, &tr->v4l2_dev);
+	if (err)
+		goto err;
+
+	tr->video_dev.v4l2_dev = &tr->v4l2_dev;
+
+	tr->sd_tuner = v4l2_i2c_new_subdev_board(&tr->v4l2_dev,
+		i2c_get_adapter(pdata->i2c_adapter), pdata->tuner, NULL);
+	tr->sd_dsp = v4l2_i2c_new_subdev_board(&tr->v4l2_dev,
+		i2c_get_adapter(pdata->i2c_adapter), pdata->dsp, NULL);
+	if (tr->sd_tuner == NULL || tr->sd_dsp == NULL) {
+		err = -ENODEV;
+		goto err_video_req;
+	}
+
+	tr->v4l2_dev.ctrl_handler = tr->sd_dsp->ctrl_handler;
+
+	err = video_register_device(&tr->video_dev, VFL_TYPE_RADIO, -1);
+	if (err) {
+		dev_err(&pdev->dev, "Error reg video\n");
+		goto err_video_req;
+	}
+
+	video_set_drvdata(&tr->video_dev, tr);
+
+	platform_set_drvdata(pdev, tr);
+	return 0;
+
+err_video_req:
+	v4l2_device_unregister(&tr->v4l2_dev);
+err:
+	dev_err(&pdev->dev, "Failed to register: %d\n", err);
+
+	return err;
+}
+
+static void timbradio_remove(struct platform_device *pdev)
+{
+	struct timbradio *tr = platform_get_drvdata(pdev);
+
+	video_unregister_device(&tr->video_dev);
+	v4l2_device_unregister(&tr->v4l2_dev);
+}
+
+static struct platform_driver timbradio_platform_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= timbradio_probe,
+	.remove		= timbradio_remove,
+};
+
+module_platform_driver(timbradio_platform_driver);
+
+MODULE_DESCRIPTION("Timberdale Radio driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.0.2");
+MODULE_ALIAS("platform:"DRIVER_NAME);
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
new file mode 100644
index 000000000..c7b30d430
--- /dev/null
+++ b/drivers/media/radio/radio-trust.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* radio-trust.c - Trust FM Radio card driver for Linux 2.2
+ * by Eric Lammerts <eric@scintilla.utwente.nl>
+ *
+ * Based on radio-aztech.c. Original notes:
+ *
+ * Adapted to support the Video for Linux API by
+ * Russell Kroll <rkroll@exploits.org>.  Based on original tuner code by:
+ *
+ * Quay Ly
+ * Donald Song
+ * Jason Lewis      (jlewis@twilight.vtc.vsc.edu)
+ * Scott McGrath    (smcgrath@twilight.vtc.vsc.edu)
+ * William McGrath  (wmcgrath@twilight.vtc.vsc.edu)
+ *
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/videodev2.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include "radio-isa.h"
+
+MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
+MODULE_DESCRIPTION("A driver for the Trust FM Radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.99");
+
+/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
+
+#ifndef CONFIG_RADIO_TRUST_PORT
+#define CONFIG_RADIO_TRUST_PORT -1
+#endif
+
+#define TRUST_MAX 2
+
+static int io[TRUST_MAX] = { [0] = CONFIG_RADIO_TRUST_PORT,
+			      [1 ... (TRUST_MAX - 1)] = -1 };
+static int radio_nr[TRUST_MAX] = { [0 ... (TRUST_MAX - 1)] = -1 };
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "I/O addresses of the Trust FM Radio card (0x350 or 0x358)");
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+struct trust {
+	struct radio_isa_card isa;
+	int ioval;
+};
+
+static struct radio_isa_card *trust_alloc(void)
+{
+	struct trust *tr = kzalloc_obj(*tr);
+
+	return tr ? &tr->isa : NULL;
+}
+
+/* i2c addresses */
+#define TDA7318_ADDR 0x88
+#define TSA6060T_ADDR 0xc4
+
+#define TR_DELAY do { inb(tr->isa.io); inb(tr->isa.io); inb(tr->isa.io); } while (0)
+#define TR_SET_SCL outb(tr->ioval |= 2, tr->isa.io)
+#define TR_CLR_SCL outb(tr->ioval &= 0xfd, tr->isa.io)
+#define TR_SET_SDA outb(tr->ioval |= 1, tr->isa.io)
+#define TR_CLR_SDA outb(tr->ioval &= 0xfe, tr->isa.io)
+
+static void write_i2c(struct trust *tr, int n, ...)
+{
+	unsigned char val, mask;
+	va_list args;
+
+	va_start(args, n);
+
+	/* start condition */
+	TR_SET_SDA;
+	TR_SET_SCL;
+	TR_DELAY;
+	TR_CLR_SDA;
+	TR_CLR_SCL;
+	TR_DELAY;
+
+	for (; n; n--) {
+		val = va_arg(args, unsigned);
+		for (mask = 0x80; mask; mask >>= 1) {
+			if (val & mask)
+				TR_SET_SDA;
+			else
+				TR_CLR_SDA;
+			TR_SET_SCL;
+			TR_DELAY;
+			TR_CLR_SCL;
+			TR_DELAY;
+		}
+		/* acknowledge bit */
+		TR_SET_SDA;
+		TR_SET_SCL;
+		TR_DELAY;
+		TR_CLR_SCL;
+		TR_DELAY;
+	}
+
+	/* stop condition */
+	TR_CLR_SDA;
+	TR_DELAY;
+	TR_SET_SCL;
+	TR_DELAY;
+	TR_SET_SDA;
+	TR_DELAY;
+
+	va_end(args);
+}
+
+static int trust_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	struct trust *tr = container_of(isa, struct trust, isa);
+
+	tr->ioval = (tr->ioval & 0xf7) | (mute << 3);
+	outb(tr->ioval, isa->io);
+	write_i2c(tr, 2, TDA7318_ADDR, vol ^ 0x1f);
+	return 0;
+}
+
+static int trust_s_stereo(struct radio_isa_card *isa, bool stereo)
+{
+	struct trust *tr = container_of(isa, struct trust, isa);
+
+	tr->ioval = (tr->ioval & 0xfb) | (!stereo << 2);
+	outb(tr->ioval, isa->io);
+	return 0;
+}
+
+static u32 trust_g_signal(struct radio_isa_card *isa)
+{
+	int i, v;
+
+	for (i = 0, v = 0; i < 100; i++)
+		v |= inb(isa->io);
+	return (v & 1) ? 0 : 0xffff;
+}
+
+static int trust_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	struct trust *tr = container_of(isa, struct trust, isa);
+
+	freq /= 160;	/* Convert to 10 kHz units	*/
+	freq += 1070;	/* Add 10.7 MHz IF		*/
+	write_i2c(tr, 5, TSA6060T_ADDR, (freq << 1) | 1,
+			freq >> 7, 0x60 | ((freq >> 15) & 1), 0);
+	return 0;
+}
+
+static int basstreble2chip[15] = {
+	0, 1, 2, 3, 4, 5, 6, 7, 14, 13, 12, 11, 10, 9, 8
+};
+
+static int trust_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct radio_isa_card *isa =
+		container_of(ctrl->handler, struct radio_isa_card, hdl);
+	struct trust *tr = container_of(isa, struct trust, isa);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_BASS:
+		write_i2c(tr, 2, TDA7318_ADDR, 0x60 | basstreble2chip[ctrl->val]);
+		return 0;
+	case V4L2_CID_AUDIO_TREBLE:
+		write_i2c(tr, 2, TDA7318_ADDR, 0x70 | basstreble2chip[ctrl->val]);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops trust_ctrl_ops = {
+	.s_ctrl = trust_s_ctrl,
+};
+
+static int trust_initialize(struct radio_isa_card *isa)
+{
+	struct trust *tr = container_of(isa, struct trust, isa);
+
+	tr->ioval = 0xf;
+	write_i2c(tr, 2, TDA7318_ADDR, 0x80);	/* speaker att. LF = 0 dB */
+	write_i2c(tr, 2, TDA7318_ADDR, 0xa0);	/* speaker att. RF = 0 dB */
+	write_i2c(tr, 2, TDA7318_ADDR, 0xc0);	/* speaker att. LR = 0 dB */
+	write_i2c(tr, 2, TDA7318_ADDR, 0xe0);	/* speaker att. RR = 0 dB */
+	write_i2c(tr, 2, TDA7318_ADDR, 0x40);	/* stereo 1 input, gain = 18.75 dB */
+
+	v4l2_ctrl_new_std(&isa->hdl, &trust_ctrl_ops,
+				V4L2_CID_AUDIO_BASS, 0, 15, 1, 8);
+	v4l2_ctrl_new_std(&isa->hdl, &trust_ctrl_ops,
+				V4L2_CID_AUDIO_TREBLE, 0, 15, 1, 8);
+	return isa->hdl.error;
+}
+
+static const struct radio_isa_ops trust_ops = {
+	.init = trust_initialize,
+	.alloc = trust_alloc,
+	.s_mute_volume = trust_s_mute_volume,
+	.s_frequency = trust_s_frequency,
+	.s_stereo = trust_s_stereo,
+	.g_signal = trust_g_signal,
+};
+
+static const int trust_ioports[] = { 0x350, 0x358 };
+
+static struct radio_isa_driver trust_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-trust",
+		},
+	},
+	.io_params = io,
+	.radio_nr_params = radio_nr,
+	.io_ports = trust_ioports,
+	.num_of_io_ports = ARRAY_SIZE(trust_ioports),
+	.region_size = 2,
+	.card = "Trust FM Radio",
+	.ops = &trust_ops,
+	.has_stereo = true,
+	.max_volume = 31,
+};
+
+static int __init trust_init(void)
+{
+	return isa_register_driver(&trust_driver.driver, TRUST_MAX);
+}
+
+static void __exit trust_exit(void)
+{
+	isa_unregister_driver(&trust_driver.driver);
+}
+
+module_init(trust_init);
+module_exit(trust_exit);
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
new file mode 100644
index 000000000..3454c9a6f
--- /dev/null
+++ b/drivers/media/radio/radio-typhoon.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Typhoon Radio Card driver for radio support
+ * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de>
+ *
+ * Notes on the hardware
+ *
+ * This card has two output sockets, one for speakers and one for line.
+ * The speaker output has volume control, but only in four discrete
+ * steps. The line output has neither volume control nor mute.
+ *
+ * The card has auto-stereo according to its manual, although it all
+ * sounds mono to me (even with the Win/DOS drivers). Maybe it's my
+ * antenna - I really don't know for sure.
+ *
+ * Frequency control is done digitally.
+ *
+ * Volume control is done digitally, but there are only four different
+ * possible values. So you should better always turn the volume up and
+ * use line control. I got the best results by connecting line output
+ * to the sound card microphone input. For such a configuration the
+ * volume control has no effect, since volume control only influences
+ * the speaker output.
+ *
+ * There is no explicit mute/unmute. So I set the radio frequency to a
+ * value where I do expect just noise and turn the speaker volume down.
+ * The frequency change is necessary since the card never seems to be
+ * completely silent.
+ *
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
+ */
+
+#include <linux/module.h>	/* Modules                        */
+#include <linux/init.h>		/* Initdata                       */
+#include <linux/ioport.h>	/* request_region		  */
+#include <linux/videodev2.h>	/* kernel radio structs           */
+#include <linux/io.h>		/* outb, outb_p                   */
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include "radio-isa.h"
+
+#define DRIVER_VERSION "0.1.2"
+
+MODULE_AUTHOR("Dr. Henrik Seidel");
+MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio).");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.99");
+
+#ifndef CONFIG_RADIO_TYPHOON_PORT
+#define CONFIG_RADIO_TYPHOON_PORT -1
+#endif
+
+#ifndef CONFIG_RADIO_TYPHOON_MUTEFREQ
+#define CONFIG_RADIO_TYPHOON_MUTEFREQ 87000
+#endif
+
+#define TYPHOON_MAX 2
+
+static int io[TYPHOON_MAX] = { [0] = CONFIG_RADIO_TYPHOON_PORT,
+			      [1 ... (TYPHOON_MAX - 1)] = -1 };
+static int radio_nr[TYPHOON_MAX]	= { [0 ... (TYPHOON_MAX - 1)] = -1 };
+static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ;
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "I/O addresses of the Typhoon card (0x316 or 0x336)");
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+module_param(mutefreq, ulong, 0);
+MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)");
+
+struct typhoon {
+	struct radio_isa_card isa;
+	int muted;
+};
+
+static struct radio_isa_card *typhoon_alloc(void)
+{
+	struct typhoon *ty = kzalloc_obj(*ty);
+
+	return ty ? &ty->isa : NULL;
+}
+
+static int typhoon_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	unsigned long outval;
+	unsigned long x;
+
+	/*
+	 * The frequency transfer curve is not linear. The best fit I could
+	 * get is
+	 *
+	 * outval = -155 + exp((f + 15.55) * 0.057))
+	 *
+	 * where frequency f is in MHz. Since we don't have exp in the kernel,
+	 * I approximate this function by a third order polynomial.
+	 *
+	 */
+
+	x = freq / 160;
+	outval = (x * x + 2500) / 5000;
+	outval = (outval * x + 5000) / 10000;
+	outval -= (10 * x * x + 10433) / 20866;
+	outval += 4 * x - 11505;
+
+	outb_p((outval >> 8) & 0x01, isa->io + 4);
+	outb_p(outval >> 9, isa->io + 6);
+	outb_p(outval & 0xff, isa->io + 8);
+	return 0;
+}
+
+static int typhoon_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	struct typhoon *ty = container_of(isa, struct typhoon, isa);
+
+	if (mute)
+		vol = 0;
+	vol >>= 14;			/* Map 16 bit to 2 bit */
+	vol &= 3;
+	outb_p(vol / 2, isa->io);	/* Set the volume, high bit. */
+	outb_p(vol % 2, isa->io + 2);	/* Set the volume, low bit. */
+
+	if (vol == 0 && !ty->muted) {
+		ty->muted = true;
+		return typhoon_s_frequency(isa, mutefreq << 4);
+	}
+	if (vol && ty->muted) {
+		ty->muted = false;
+		return typhoon_s_frequency(isa, isa->freq);
+	}
+	return 0;
+}
+
+static const struct radio_isa_ops typhoon_ops = {
+	.alloc = typhoon_alloc,
+	.s_mute_volume = typhoon_s_mute_volume,
+	.s_frequency = typhoon_s_frequency,
+};
+
+static const int typhoon_ioports[] = { 0x316, 0x336 };
+
+static struct radio_isa_driver typhoon_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-typhoon",
+		},
+	},
+	.io_params = io,
+	.radio_nr_params = radio_nr,
+	.io_ports = typhoon_ioports,
+	.num_of_io_ports = ARRAY_SIZE(typhoon_ioports),
+	.region_size = 8,
+	.card = "Typhoon Radio",
+	.ops = &typhoon_ops,
+	.has_stereo = true,
+	.max_volume = 3,
+};
+
+static int __init typhoon_init(void)
+{
+	if (mutefreq < 87000 || mutefreq > 108000) {
+		printk(KERN_ERR "%s: You must set a frequency (in kHz) used when muting the card,\n",
+				typhoon_driver.driver.driver.name);
+		printk(KERN_ERR "%s: e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108000)\n",
+				typhoon_driver.driver.driver.name);
+		return -ENODEV;
+	}
+	return isa_register_driver(&typhoon_driver.driver, TYPHOON_MAX);
+}
+
+static void __exit typhoon_exit(void)
+{
+	isa_unregister_driver(&typhoon_driver.driver);
+}
+
+
+module_init(typhoon_init);
+module_exit(typhoon_exit);
+
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
new file mode 100644
index 000000000..b92b24973
--- /dev/null
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Zoltrix Radio Plus driver
+ * Copyright 1998 C. van Schaik <carl@leg.uct.ac.za>
+ *
+ * BUGS
+ *  Due to the inconsistency in reading from the signal flags
+ *  it is difficult to get an accurate tuned signal.
+ *
+ *  It seems that the card is not linear to 0 volume. It cuts off
+ *  at a low volume, and it is not possible (at least I have not found)
+ *  to get fine volume control over the low volume range.
+ *
+ *  Some code derived from code by Romolo Manfredini
+ *				   romolo@bicnet.it
+ *
+ * 1999-05-06 - (C. van Schaik)
+ *	      - Make signal strength and stereo scans
+ *		kinder to cpu while in delay
+ * 1999-01-05 - (C. van Schaik)
+ *	      - Changed tuning to 1/160Mhz accuracy
+ *	      - Added stereo support
+ *		(card defaults to stereo)
+ *		(can explicitly force mono on the card)
+ *		(can detect if station is in stereo)
+ *	      - Added unmute function
+ *	      - Reworked ioctl functions
+ * 2002-07-15 - Fix Stereo typo
+ *
+ * 2006-07-24 - Converted to V4L2 API
+ *		by Mauro Carvalho Chehab <mchehab@kernel.org>
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hverkuil@kernel.org>
+ *
+ * Note that this is the driver for the Zoltrix Radio Plus.
+ * This driver does not work for the Zoltrix Radio Plus 108 or the
+ * Zoltrix Radio Plus for Windows.
+ *
+ * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
+ */
+
+#include <linux/module.h>	/* Modules                        */
+#include <linux/init.h>		/* Initdata                       */
+#include <linux/ioport.h>	/* request_region		  */
+#include <linux/delay.h>	/* udelay, msleep                 */
+#include <linux/videodev2.h>	/* kernel radio structs           */
+#include <linux/mutex.h>
+#include <linux/io.h>		/* outb, outb_p                   */
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include "radio-isa.h"
+
+MODULE_AUTHOR("C. van Schaik");
+MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.99");
+
+#ifndef CONFIG_RADIO_ZOLTRIX_PORT
+#define CONFIG_RADIO_ZOLTRIX_PORT -1
+#endif
+
+#define ZOLTRIX_MAX 2
+
+static int io[ZOLTRIX_MAX] = { [0] = CONFIG_RADIO_ZOLTRIX_PORT,
+			       [1 ... (ZOLTRIX_MAX - 1)] = -1 };
+static int radio_nr[ZOLTRIX_MAX] = { [0 ... (ZOLTRIX_MAX - 1)] = -1 };
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "I/O addresses of the Zoltrix Radio Plus card (0x20c or 0x30c)");
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+struct zoltrix {
+	struct radio_isa_card isa;
+	int curvol;
+	bool muted;
+};
+
+static struct radio_isa_card *zoltrix_alloc(void)
+{
+	struct zoltrix *zol = kzalloc_obj(*zol);
+
+	return zol ? &zol->isa : NULL;
+}
+
+static int zoltrix_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
+
+	zol->curvol = vol;
+	zol->muted = mute;
+	if (mute || vol == 0) {
+		outb(0, isa->io);
+		outb(0, isa->io);
+		inb(isa->io + 3);            /* Zoltrix needs to be read to confirm */
+		return 0;
+	}
+
+	outb(vol - 1, isa->io);
+	msleep(10);
+	inb(isa->io + 2);
+	return 0;
+}
+
+/* tunes the radio to the desired frequency */
+static int zoltrix_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
+	struct v4l2_device *v4l2_dev = &isa->v4l2_dev;
+	unsigned long long bitmask, f, m;
+	bool stereo = isa->stereo;
+	int i;
+
+	if (freq == 0) {
+		v4l2_warn(v4l2_dev, "cannot set a frequency of 0.\n");
+		return -EINVAL;
+	}
+
+	m = (freq / 160 - 8800) * 2;
+	f = (unsigned long long)m + 0x4d1c;
+
+	bitmask = 0xc480402c10080000ull;
+	i = 45;
+
+	outb(0, isa->io);
+	outb(0, isa->io);
+	inb(isa->io + 3);            /* Zoltrix needs to be read to confirm */
+
+	outb(0x40, isa->io);
+	outb(0xc0, isa->io);
+
+	bitmask = (bitmask ^ ((f & 0xff) << 47) ^ ((f & 0xff00) << 30) ^ (stereo << 31));
+	while (i--) {
+		if ((bitmask & 0x8000000000000000ull) != 0) {
+			outb(0x80, isa->io);
+			udelay(50);
+			outb(0x00, isa->io);
+			udelay(50);
+			outb(0x80, isa->io);
+			udelay(50);
+		} else {
+			outb(0xc0, isa->io);
+			udelay(50);
+			outb(0x40, isa->io);
+			udelay(50);
+			outb(0xc0, isa->io);
+			udelay(50);
+		}
+		bitmask *= 2;
+	}
+	/* termination sequence */
+	outb(0x80, isa->io);
+	outb(0xc0, isa->io);
+	outb(0x40, isa->io);
+	udelay(1000);
+	inb(isa->io + 2);
+	udelay(1000);
+
+	return zoltrix_s_mute_volume(isa, zol->muted, zol->curvol);
+}
+
+/* Get signal strength */
+static u32 zoltrix_g_rxsubchans(struct radio_isa_card *isa)
+{
+	struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
+	int a, b;
+
+	outb(0x00, isa->io);         /* This stuff I found to do nothing */
+	outb(zol->curvol, isa->io);
+	msleep(20);
+
+	a = inb(isa->io);
+	msleep(10);
+	b = inb(isa->io);
+
+	return (a == b && a == 0xcf) ?
+		V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
+}
+
+static u32 zoltrix_g_signal(struct radio_isa_card *isa)
+{
+	struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
+	int a, b;
+
+	outb(0x00, isa->io);         /* This stuff I found to do nothing */
+	outb(zol->curvol, isa->io);
+	msleep(20);
+
+	a = inb(isa->io);
+	msleep(10);
+	b = inb(isa->io);
+
+	if (a != b)
+		return 0;
+
+	/* I found this out by playing with a binary scanner on the card io */
+	return (a == 0xcf || a == 0xdf || a == 0xef) ? 0xffff : 0;
+}
+
+static int zoltrix_s_stereo(struct radio_isa_card *isa, bool stereo)
+{
+	return zoltrix_s_frequency(isa, isa->freq);
+}
+
+static const struct radio_isa_ops zoltrix_ops = {
+	.alloc = zoltrix_alloc,
+	.s_mute_volume = zoltrix_s_mute_volume,
+	.s_frequency = zoltrix_s_frequency,
+	.s_stereo = zoltrix_s_stereo,
+	.g_rxsubchans = zoltrix_g_rxsubchans,
+	.g_signal = zoltrix_g_signal,
+};
+
+static const int zoltrix_ioports[] = { 0x20c, 0x30c };
+
+static struct radio_isa_driver zoltrix_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-zoltrix",
+		},
+	},
+	.io_params = io,
+	.radio_nr_params = radio_nr,
+	.io_ports = zoltrix_ioports,
+	.num_of_io_ports = ARRAY_SIZE(zoltrix_ioports),
+	.region_size = 2,
+	.card = "Zoltrix Radio Plus",
+	.ops = &zoltrix_ops,
+	.has_stereo = true,
+	.max_volume = 15,
+};
+
+static int __init zoltrix_init(void)
+{
+	return isa_register_driver(&zoltrix_driver.driver, ZOLTRIX_MAX);
+}
+
+static void __exit zoltrix_exit(void)
+{
+	isa_unregister_driver(&zoltrix_driver.driver);
+}
+
+module_init(zoltrix_init);
+module_exit(zoltrix_exit);
+
diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c
new file mode 100644
index 000000000..bd8bd295a
--- /dev/null
+++ b/drivers/media/radio/saa7706h.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * saa7706.c Philips SAA7706H Car Radio DSP driver
+ * Copyright (c) 2009 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+#define DRIVER_NAME "saa7706h"
+
+/* the I2C memory map looks like this
+
+	$1C00 - $FFFF Not Used
+	$2200 - $3FFF Reserved YRAM (DSP2) space
+	$2000 - $21FF YRAM (DSP2)
+	$1FF0 - $1FFF Hardware Registers
+	$1280 - $1FEF Reserved XRAM (DSP2) space
+	$1000 - $127F XRAM (DSP2)
+	$0FFF        DSP CONTROL
+	$0A00 - $0FFE Reserved
+	$0980 - $09FF Reserved YRAM (DSP1) space
+	$0800 - $097F YRAM (DSP1)
+	$0200 - $07FF Not Used
+	$0180 - $01FF Reserved XRAM (DSP1) space
+	$0000 - $017F XRAM (DSP1)
+*/
+
+#define SAA7706H_REG_CTRL		0x0fff
+#define SAA7706H_CTRL_BYP_PLL		0x0001
+#define SAA7706H_CTRL_PLL_DIV_MASK	0x003e
+#define SAA7706H_CTRL_PLL3_62975MHZ	0x003e
+#define SAA7706H_CTRL_DSP_TURBO		0x0040
+#define SAA7706H_CTRL_PC_RESET_DSP1	0x0080
+#define SAA7706H_CTRL_PC_RESET_DSP2	0x0100
+#define SAA7706H_CTRL_DSP1_ROM_EN_MASK	0x0600
+#define SAA7706H_CTRL_DSP1_FUNC_PROM	0x0000
+#define SAA7706H_CTRL_DSP2_ROM_EN_MASK	0x1800
+#define SAA7706H_CTRL_DSP2_FUNC_PROM	0x0000
+#define SAA7706H_CTRL_DIG_SIL_INTERPOL	0x8000
+
+#define SAA7706H_REG_EVALUATION			0x1ff0
+#define SAA7706H_EVAL_DISABLE_CHARGE_PUMP	0x000001
+#define SAA7706H_EVAL_DCS_CLOCK			0x000002
+#define SAA7706H_EVAL_GNDRC1_ENABLE		0x000004
+#define SAA7706H_EVAL_GNDRC2_ENABLE		0x000008
+
+#define SAA7706H_REG_CL_GEN1			0x1ff3
+#define SAA7706H_CL_GEN1_MIN_LOOPGAIN_MASK	0x00000f
+#define SAA7706H_CL_GEN1_LOOPGAIN_MASK		0x0000f0
+#define SAA7706H_CL_GEN1_COARSE_RATION		0xffff00
+
+#define SAA7706H_REG_CL_GEN2			0x1ff4
+#define SAA7706H_CL_GEN2_WSEDGE_FALLING		0x000001
+#define SAA7706H_CL_GEN2_STOP_VCO		0x000002
+#define SAA7706H_CL_GEN2_FRERUN			0x000004
+#define SAA7706H_CL_GEN2_ADAPTIVE		0x000008
+#define SAA7706H_CL_GEN2_FINE_RATIO_MASK	0x0ffff0
+
+#define SAA7706H_REG_CL_GEN4		0x1ff6
+#define SAA7706H_CL_GEN4_BYPASS_PLL1	0x001000
+#define SAA7706H_CL_GEN4_PLL1_DIV_MASK	0x03e000
+#define SAA7706H_CL_GEN4_DSP1_TURBO	0x040000
+
+#define SAA7706H_REG_SEL	0x1ff7
+#define SAA7706H_SEL_DSP2_SRCA_MASK	0x000007
+#define SAA7706H_SEL_DSP2_FMTA_MASK	0x000031
+#define SAA7706H_SEL_DSP2_SRCB_MASK	0x0001c0
+#define SAA7706H_SEL_DSP2_FMTB_MASK	0x000e00
+#define SAA7706H_SEL_DSP1_SRC_MASK	0x003000
+#define SAA7706H_SEL_DSP1_FMT_MASK	0x01c003
+#define SAA7706H_SEL_SPDIF2		0x020000
+#define SAA7706H_SEL_HOST_IO_FMT_MASK	0x1c0000
+#define SAA7706H_SEL_EN_HOST_IO		0x200000
+
+#define SAA7706H_REG_IAC		0x1ff8
+#define SAA7706H_REG_CLK_SET		0x1ff9
+#define SAA7706H_REG_CLK_COEFF		0x1ffa
+#define SAA7706H_REG_INPUT_SENS		0x1ffb
+#define SAA7706H_INPUT_SENS_RDS_VOL_MASK	0x0003f
+#define SAA7706H_INPUT_SENS_FM_VOL_MASK		0x00fc0
+#define SAA7706H_INPUT_SENS_FM_MPX		0x01000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_A_EN	0x02000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_B_EN	0x04000
+#define SAA7706H_REG_PHONE_NAV_AUDIO	0x1ffc
+#define SAA7706H_REG_IO_CONF_DSP2	0x1ffd
+#define SAA7706H_REG_STATUS_DSP2	0x1ffe
+#define SAA7706H_REG_PC_DSP2		0x1fff
+
+#define SAA7706H_DSP1_MOD0	0x0800
+#define SAA7706H_DSP1_ROM_VER	0x097f
+#define SAA7706H_DSP2_MPTR0	0x1000
+
+#define SAA7706H_DSP1_MODPNTR	0x0000
+
+#define SAA7706H_DSP2_XMEM_CONTLLCW	0x113e
+#define SAA7706H_DSP2_XMEM_BUSAMP	0x114a
+#define SAA7706H_DSP2_XMEM_FDACPNTR	0x11f9
+#define SAA7706H_DSP2_XMEM_IIS1PNTR	0x11fb
+
+#define SAA7706H_DSP2_YMEM_PVGA		0x212a
+#define SAA7706H_DSP2_YMEM_PVAT1	0x212b
+#define SAA7706H_DSP2_YMEM_PVAT		0x212c
+#define SAA7706H_DSP2_YMEM_ROM_VER	0x21ff
+
+#define SUPPORTED_DSP1_ROM_VER		0x667
+
+struct saa7706h_state {
+	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+	unsigned muted;
+};
+
+static inline struct saa7706h_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct saa7706h_state, sd);
+}
+
+static int saa7706h_i2c_send(struct i2c_client *client, const u8 *data, int len)
+{
+	int err = i2c_master_send(client, data, len);
+	if (err == len)
+		return 0;
+	return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_i2c_transfer(struct i2c_client *client,
+	struct i2c_msg *msgs, int num)
+{
+	int err = i2c_transfer(client->adapter, msgs, num);
+	if (err == num)
+		return 0;
+	return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_set_reg24(struct v4l2_subdev *sd, u16 reg, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[5];
+	int pos = 0;
+
+	buf[pos++] = reg >> 8;
+	buf[pos++] = reg;
+	buf[pos++] = val >> 16;
+	buf[pos++] = val >> 8;
+	buf[pos++] = val;
+
+	return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg24_err(struct v4l2_subdev *sd, u16 reg, u32 val,
+	int *err)
+{
+	return *err ? *err : saa7706h_set_reg24(sd, reg, val);
+}
+
+static int saa7706h_set_reg16(struct v4l2_subdev *sd, u16 reg, u16 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[4];
+	int pos = 0;
+
+	buf[pos++] = reg >> 8;
+	buf[pos++] = reg;
+	buf[pos++] = val >> 8;
+	buf[pos++] = val;
+
+	return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg16_err(struct v4l2_subdev *sd, u16 reg, u16 val,
+	int *err)
+{
+	return *err ? *err : saa7706h_set_reg16(sd, reg, val);
+}
+
+static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[2];
+	int err;
+	u8 regaddr[] = {reg >> 8, reg};
+	struct i2c_msg msg[] = {
+					{
+						.addr = client->addr,
+						.len = sizeof(regaddr),
+						.buf = regaddr
+					},
+					{
+						.addr = client->addr,
+						.flags = I2C_M_RD,
+						.len = sizeof(buf),
+						.buf = buf
+					}
+				};
+
+	err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg));
+	if (err)
+		return err;
+
+	return buf[0] << 8 | buf[1];
+}
+
+static int saa7706h_unmute(struct v4l2_subdev *sd)
+{
+	struct saa7706h_state *state = to_state(sd);
+	int err = 0;
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+		SAA7706H_CTRL_PC_RESET_DSP2, &err);
+
+	/* newer versions of the chip requires a small sleep after reset */
+	msleep(1);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_EVALUATION, 0, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN1, 0x040022, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN2,
+		SAA7706H_CL_GEN2_WSEDGE_FALLING, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN4, 0x024080, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_SEL, 0x200080, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IAC, 0xf4caed, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_SET, 0x124334, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_COEFF, 0x004a1a,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_INPUT_SENS, 0x0071c7,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PHONE_NAV_AUDIO,
+		0x0e22ff, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IO_CONF_DSP2, 0x001ff8,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_STATUS_DSP2, 0x080003,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PC_DSP2, 0x000004, &err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP1_MOD0, 0x0c6c, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_MPTR0, 0x000b4b, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x000600, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x0000c0, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000819,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x00085a,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_BUSAMP, 0x7fffff,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_FDACPNTR, 0x2000cb,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_IIS1PNTR, 0x2000cb,
+		&err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVGA, 0x0f80, &err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT1, 0x0800,
+		&err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT, 0x0800, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000905,
+		&err);
+	if (!err)
+		state->muted = 0;
+	return err;
+}
+
+static int saa7706h_mute(struct v4l2_subdev *sd)
+{
+	struct saa7706h_state *state = to_state(sd);
+	int err;
+
+	err = saa7706h_set_reg16(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+		SAA7706H_CTRL_PC_RESET_DSP2);
+	if (!err)
+		state->muted = 1;
+	return err;
+}
+
+static int saa7706h_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct saa7706h_state *state =
+		container_of(ctrl->handler, struct saa7706h_state, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (ctrl->val)
+			return saa7706h_mute(&state->sd);
+		return saa7706h_unmute(&state->sd);
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops saa7706h_ctrl_ops = {
+	.s_ctrl = saa7706h_s_ctrl,
+};
+
+static const struct v4l2_subdev_ops empty_ops = {};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int saa7706h_probe(struct i2c_client *client)
+{
+	struct saa7706h_state *state;
+	struct v4l2_subdev *sd;
+	int err;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	v4l_info(client, "chip found @ 0x%02x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	state = kzalloc_obj(struct saa7706h_state);
+	if (state == NULL)
+		return -ENOMEM;
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &empty_ops);
+
+	v4l2_ctrl_handler_init(&state->hdl, 4);
+	v4l2_ctrl_new_std(&state->hdl, &saa7706h_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	sd->ctrl_handler = &state->hdl;
+	err = state->hdl.error;
+	if (err)
+		goto err;
+
+	/* check the rom versions */
+	err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER);
+	if (err < 0)
+		goto err;
+	if (err != SUPPORTED_DSP1_ROM_VER)
+		v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err);
+	state->muted = 1;
+
+	/* startup in a muted state */
+	err = saa7706h_mute(sd);
+	if (err)
+		goto err;
+
+	return 0;
+
+err:
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(to_state(sd));
+
+	printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
+
+	return err;
+}
+
+static void saa7706h_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct saa7706h_state *state = to_state(sd);
+
+	saa7706h_mute(sd);
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(to_state(sd));
+}
+
+static const struct i2c_device_id saa7706h_id[] = {
+	{ .name = DRIVER_NAME },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, saa7706h_id);
+
+static struct i2c_driver saa7706h_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= saa7706h_probe,
+	.remove		= saa7706h_remove,
+	.id_table	= saa7706h_id,
+};
+
+module_i2c_driver(saa7706h_driver);
+
+MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/radio/si470x/Kconfig b/drivers/media/radio/si470x/Kconfig
new file mode 100644
index 000000000..9f7d35b04
--- /dev/null
+++ b/drivers/media/radio/si470x/Kconfig
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config RADIO_SI470X
+	tristate "Silicon Labs Si470x FM Radio Receiver support"
+	depends on VIDEO_DEV
+	help
+	  This is a driver for devices with the Silicon Labs SI470x
+	  chip (either via USB or I2C buses).
+
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port or if it is used by some other driver
+	  via I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-si470x-common.
+
+config USB_SI470X
+	tristate "Silicon Labs Si470x FM Radio Receiver support with USB"
+	depends on USB && RADIO_SI470X
+	help
+	  This is a driver for USB devices with the Silicon Labs SI470x
+	  chip. Currently these devices are known to work:
+	  - 10c4:818a: Silicon Labs USB FM Radio Reference Design
+	  - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music)
+	  - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
+	  - 10c5:819a: Sanei Electric FM USB Radio (aka DealExtreme.com PCear)
+
+	  Sound is provided by the ALSA USB Audio/MIDI driver. Therefore
+	  if you don't want to use the device solely for RDS receiving,
+	  it is recommended to also select SND_USB_AUDIO.
+
+	  Please have a look at the documentation, especially on how
+	  to redirect the audio stream from the radio to your sound device:
+	  Documentation/admin-guide/media/si470x.rst
+
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-usb-si470x.
+
+config I2C_SI470X
+	tristate "Silicon Labs Si470x FM Radio Receiver support with I2C"
+	depends on I2C && RADIO_SI470X
+	help
+	  This is a driver for I2C devices with the Silicon Labs SI470x
+	  chip.
+
+	  Say Y here if you want to connect this type of radio to your
+	  computer's I2C port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-i2c-si470x.
diff --git a/drivers/media/radio/si470x/Makefile b/drivers/media/radio/si470x/Makefile
new file mode 100644
index 000000000..e392126b0
--- /dev/null
+++ b/drivers/media/radio/si470x/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for radios with Silicon Labs Si470x FM Radio Receivers
+#
+
+obj-$(CONFIG_RADIO_SI470X) += radio-si470x-common.o
+obj-$(CONFIG_USB_SI470X) += radio-si470x-usb.o
+obj-$(CONFIG_I2C_SI470X) += radio-si470x-i2c.o
diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c
new file mode 100644
index 000000000..af0a70910
--- /dev/null
+++ b/drivers/media/radio/si470x/radio-si470x-common.c
@@ -0,0 +1,794 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  drivers/media/radio/si470x/radio-si470x-common.c
+ *
+ *  Driver for radios with Silicon Labs Si470x FM Radio Receivers
+ *
+ *  Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net>
+ *  Copyright (c) 2012 Hans de Goede <hdegoede@redhat.com>
+ */
+
+
+/*
+ * History:
+ * 2008-01-12	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Version 1.0.0
+ *		- First working version
+ * 2008-01-13	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Version 1.0.1
+ *		- Improved error handling, every function now returns errno
+ *		- Improved multi user access (start/mute/stop)
+ *		- Channel doesn't get lost anymore after start/mute/stop
+ *		- RDS support added (polling mode via interrupt EP 1)
+ *		- marked default module parameters with *value*
+ *		- switched from bit structs to bit masks
+ *		- header file cleaned and integrated
+ * 2008-01-14	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Version 1.0.2
+ *		- hex values are now lower case
+ *		- commented USB ID for ADS/Tech moved on todo list
+ *		- blacklisted si470x in hid-quirks.c
+ *		- rds buffer handling functions integrated into *_work, *_read
+ *		- rds_command in si470x_poll exchanged against simple retval
+ *		- check for firmware version 15
+ *		- code order and prototypes still remain the same
+ *		- spacing and bottom of band codes remain the same
+ * 2008-01-16	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Version 1.0.3
+ *		- code reordered to avoid function prototypes
+ *		- switch/case defaults are now more user-friendly
+ *		- unified comment style
+ *		- applied all checkpatch.pl v1.12 suggestions
+ *		  except the warning about the too long lines with bit comments
+ *		- renamed FMRADIO to RADIO to cut line length (checkpatch.pl)
+ * 2008-01-22	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Version 1.0.4
+ *		- avoid poss. locking when doing copy_to_user which may sleep
+ *		- RDS is automatically activated on read now
+ *		- code cleaned of unnecessary rds_commands
+ *		- USB Vendor/Product ID for ADS/Tech FM Radio Receiver verified
+ *		  (thanks to Guillaume RAMOUSSE)
+ * 2008-01-27	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Version 1.0.5
+ *		- number of seek_retries changed to tune_timeout
+ *		- fixed problem with incomplete tune operations by own buffers
+ *		- optimization of variables and printf types
+ *		- improved error logging
+ * 2008-01-31	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Oliver Neukum <oliver@neukum.org>
+ *		Version 1.0.6
+ *		- fixed coverity checker warnings in *_usb_driver_disconnect
+ *		- probe()/open() race by correct ordering in probe()
+ *		- DMA coherency rules by separate allocation of all buffers
+ *		- use of endianness macros
+ *		- abuse of spinlock, replaced by mutex
+ *		- racy handling of timer in disconnect,
+ *		  replaced by delayed_work
+ *		- racy interruptible_sleep_on(),
+ *		  replaced with wait_event_interruptible()
+ *		- handle signals in read()
+ * 2008-02-08	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Oliver Neukum <oliver@neukum.org>
+ *		Version 1.0.7
+ *		- usb autosuspend support
+ *		- unplugging fixed
+ * 2008-05-07	Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		Version 1.0.8
+ *		- hardware frequency seek support
+ *		- afc indication
+ *		- more safety checks, let si470x_get_freq return errno
+ *		- vidioc behavior corrected according to v4l2 spec
+ * 2008-10-20	Alexey Klimov <klimov.linux@gmail.com>
+ *		- add support for KWorld USB FM Radio FM700
+ *		- blacklisted KWorld radio in hid-core.c and hid-ids.h
+ * 2008-12-03	Mark Lord <mlord@pobox.com>
+ *		- add support for DealExtreme USB Radio
+ * 2009-01-31	Bob Ross <pigiron@gmx.com>
+ *		- correction of stereo detection/setting
+ *		- correction of signal strength indicator scaling
+ * 2009-01-31	Rick Bronson <rick@efn.org>
+ *		Tobias Lorenz <tobias.lorenz@gmx.net>
+ *		- add LED status output
+ *		- get HW/SW version from scratchpad
+ * 2009-06-16   Edouard Lafargue <edouard@lafargue.name>
+ *		Version 1.0.10
+ *		- add support for interrupt mode for RDS endpoint,
+ *                instead of polling.
+ *                Improves RDS reception significantly
+ */
+
+
+/* kernel includes */
+#include "radio-si470x.h"
+
+/**************************************************************************
+ * Module Parameters
+ **************************************************************************/
+
+/* Spacing (kHz) */
+/* 0: 200 kHz (USA, Australia) */
+/* 1: 100 kHz (Europe, Japan) */
+/* 2:  50 kHz */
+static unsigned short space = 2;
+module_param(space, ushort, 0444);
+MODULE_PARM_DESC(space, "Spacing: 0=200kHz 1=100kHz *2=50kHz*");
+
+/* De-emphasis */
+/* 0: 75 us (USA) */
+/* 1: 50 us (Europe, Australia, Japan) */
+static unsigned short de = 1;
+module_param(de, ushort, 0444);
+MODULE_PARM_DESC(de, "De-emphasis: 0=75us *1=50us*");
+
+/* Tune timeout */
+static unsigned int tune_timeout = 3000;
+module_param(tune_timeout, uint, 0644);
+MODULE_PARM_DESC(tune_timeout, "Tune timeout: *3000*");
+
+/* Seek timeout */
+static unsigned int seek_timeout = 5000;
+module_param(seek_timeout, uint, 0644);
+MODULE_PARM_DESC(seek_timeout, "Seek timeout: *5000*");
+
+static const struct v4l2_frequency_band bands[] = {
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			    V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO |
+			    V4L2_TUNER_CAP_FREQ_BANDS |
+			    V4L2_TUNER_CAP_HWSEEK_BOUNDED |
+			    V4L2_TUNER_CAP_HWSEEK_WRAP,
+		.rangelow   =  87500 * 16,
+		.rangehigh  = 108000 * 16,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 1,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			    V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO |
+			    V4L2_TUNER_CAP_FREQ_BANDS |
+			    V4L2_TUNER_CAP_HWSEEK_BOUNDED |
+			    V4L2_TUNER_CAP_HWSEEK_WRAP,
+		.rangelow   =  76000 * 16,
+		.rangehigh  = 108000 * 16,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 2,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			    V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO |
+			    V4L2_TUNER_CAP_FREQ_BANDS |
+			    V4L2_TUNER_CAP_HWSEEK_BOUNDED |
+			    V4L2_TUNER_CAP_HWSEEK_WRAP,
+		.rangelow   =  76000 * 16,
+		.rangehigh  =  90000 * 16,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+};
+
+/**************************************************************************
+ * Generic Functions
+ **************************************************************************/
+
+/*
+ * si470x_set_band - set the band
+ */
+static int si470x_set_band(struct si470x_device *radio, int band)
+{
+	if (radio->band == band)
+		return 0;
+
+	radio->band = band;
+	radio->registers[SYSCONFIG2] &= ~SYSCONFIG2_BAND;
+	radio->registers[SYSCONFIG2] |= radio->band << 6;
+	return radio->set_register(radio, SYSCONFIG2);
+}
+
+/*
+ * si470x_set_chan - set the channel
+ */
+static int si470x_set_chan(struct si470x_device *radio, unsigned short chan)
+{
+	int retval;
+	unsigned long time_left;
+	bool timed_out = false;
+
+	retval = radio->get_register(radio, POWERCFG);
+	if (retval)
+		return retval;
+
+	if ((radio->registers[POWERCFG] & (POWERCFG_ENABLE|POWERCFG_DMUTE))
+		!= (POWERCFG_ENABLE|POWERCFG_DMUTE)) {
+		return 0;
+	}
+
+	/* start tuning */
+	radio->registers[CHANNEL] &= ~CHANNEL_CHAN;
+	radio->registers[CHANNEL] |= CHANNEL_TUNE | chan;
+	retval = radio->set_register(radio, CHANNEL);
+	if (retval < 0)
+		goto done;
+
+	/* wait till tune operation has completed */
+	reinit_completion(&radio->completion);
+	time_left = wait_for_completion_timeout(&radio->completion,
+						msecs_to_jiffies(tune_timeout));
+	if (time_left == 0)
+		timed_out = true;
+
+	if ((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0)
+		dev_warn(&radio->videodev.dev, "tune does not complete\n");
+	if (timed_out)
+		dev_warn(&radio->videodev.dev,
+			"tune timed out after %u ms\n", tune_timeout);
+
+	/* stop tuning */
+	radio->registers[CHANNEL] &= ~CHANNEL_TUNE;
+	retval = radio->set_register(radio, CHANNEL);
+
+done:
+	return retval;
+}
+
+/*
+ * si470x_get_step - get channel spacing
+ */
+static unsigned int si470x_get_step(struct si470x_device *radio)
+{
+	/* Spacing (kHz) */
+	switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) {
+	/* 0: 200 kHz (USA, Australia) */
+	case 0:
+		return 200 * 16;
+	/* 1: 100 kHz (Europe, Japan) */
+	case 1:
+		return 100 * 16;
+	/* 2:  50 kHz */
+	default:
+		return 50 * 16;
+	}
+}
+
+
+/*
+ * si470x_get_freq - get the frequency
+ */
+static int si470x_get_freq(struct si470x_device *radio, unsigned int *freq)
+{
+	int chan, retval;
+
+	/* read channel */
+	retval = radio->get_register(radio, READCHAN);
+	chan = radio->registers[READCHAN] & READCHAN_READCHAN;
+
+	/* Frequency (MHz) = Spacing (kHz) x Channel + Bottom of Band (MHz) */
+	*freq = chan * si470x_get_step(radio) + bands[radio->band].rangelow;
+
+	return retval;
+}
+
+
+/*
+ * si470x_set_freq - set the frequency
+ */
+int si470x_set_freq(struct si470x_device *radio, unsigned int freq)
+{
+	unsigned short chan;
+
+	freq = clamp(freq, bands[radio->band].rangelow,
+			   bands[radio->band].rangehigh);
+	/* Chan = [ Freq (Mhz) - Bottom of Band (MHz) ] / Spacing (kHz) */
+	chan = (freq - bands[radio->band].rangelow) / si470x_get_step(radio);
+
+	return si470x_set_chan(radio, chan);
+}
+EXPORT_SYMBOL_GPL(si470x_set_freq);
+
+
+/*
+ * si470x_set_seek - set seek
+ */
+static int si470x_set_seek(struct si470x_device *radio,
+			   const struct v4l2_hw_freq_seek *seek)
+{
+	int band, retval;
+	unsigned int freq;
+	bool timed_out = false;
+	unsigned long time_left;
+
+	/* set band */
+	if (seek->rangelow || seek->rangehigh) {
+		for (band = 0; band < ARRAY_SIZE(bands); band++) {
+			if (bands[band].rangelow  == seek->rangelow &&
+			    bands[band].rangehigh == seek->rangehigh)
+				break;
+		}
+		if (band == ARRAY_SIZE(bands))
+			return -EINVAL; /* No matching band found */
+	} else
+		band = 1; /* If nothing is specified seek 76 - 108 Mhz */
+
+	if (radio->band != band) {
+		retval = si470x_get_freq(radio, &freq);
+		if (retval)
+			return retval;
+		retval = si470x_set_band(radio, band);
+		if (retval)
+			return retval;
+		retval = si470x_set_freq(radio, freq);
+		if (retval)
+			return retval;
+	}
+
+	/* start seeking */
+	radio->registers[POWERCFG] |= POWERCFG_SEEK;
+	if (seek->wrap_around)
+		radio->registers[POWERCFG] &= ~POWERCFG_SKMODE;
+	else
+		radio->registers[POWERCFG] |= POWERCFG_SKMODE;
+	if (seek->seek_upward)
+		radio->registers[POWERCFG] |= POWERCFG_SEEKUP;
+	else
+		radio->registers[POWERCFG] &= ~POWERCFG_SEEKUP;
+	retval = radio->set_register(radio, POWERCFG);
+	if (retval < 0)
+		return retval;
+
+	/* wait till tune operation has completed */
+	reinit_completion(&radio->completion);
+	time_left = wait_for_completion_timeout(&radio->completion,
+						msecs_to_jiffies(seek_timeout));
+	if (time_left == 0)
+		timed_out = true;
+
+	if ((radio->registers[STATUSRSSI] & STATUSRSSI_STC) == 0)
+		dev_warn(&radio->videodev.dev, "seek does not complete\n");
+	if (radio->registers[STATUSRSSI] & STATUSRSSI_SF)
+		dev_warn(&radio->videodev.dev,
+			"seek failed / band limit reached\n");
+
+	/* stop seeking */
+	radio->registers[POWERCFG] &= ~POWERCFG_SEEK;
+	retval = radio->set_register(radio, POWERCFG);
+
+	/* try again, if timed out */
+	if (retval == 0 && timed_out)
+		return -ENODATA;
+	return retval;
+}
+
+
+/*
+ * si470x_start - switch on radio
+ */
+int si470x_start(struct si470x_device *radio)
+{
+	int retval;
+
+	/* powercfg */
+	radio->registers[POWERCFG] =
+		POWERCFG_DMUTE | POWERCFG_ENABLE | POWERCFG_RDSM;
+	retval = radio->set_register(radio, POWERCFG);
+	if (retval < 0)
+		goto done;
+
+	/* sysconfig 1 */
+	radio->registers[SYSCONFIG1] |= SYSCONFIG1_RDSIEN | SYSCONFIG1_STCIEN |
+					SYSCONFIG1_RDS;
+	radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_GPIO2;
+	radio->registers[SYSCONFIG1] |= SYSCONFIG1_GPIO2_INT;
+	if (de)
+		radio->registers[SYSCONFIG1] |= SYSCONFIG1_DE;
+	retval = radio->set_register(radio, SYSCONFIG1);
+	if (retval < 0)
+		goto done;
+
+	/* sysconfig 2 */
+	radio->registers[SYSCONFIG2] =
+		(0x1f  << 8) |				/* SEEKTH */
+		((radio->band << 6) & SYSCONFIG2_BAND) |/* BAND */
+		((space << 4) & SYSCONFIG2_SPACE) |	/* SPACE */
+		15;					/* VOLUME (max) */
+	retval = radio->set_register(radio, SYSCONFIG2);
+	if (retval < 0)
+		goto done;
+
+	/* reset last channel */
+	retval = si470x_set_chan(radio,
+		radio->registers[CHANNEL] & CHANNEL_CHAN);
+
+done:
+	return retval;
+}
+EXPORT_SYMBOL_GPL(si470x_start);
+
+
+/*
+ * si470x_stop - switch off radio
+ */
+int si470x_stop(struct si470x_device *radio)
+{
+	int retval;
+
+	/* sysconfig 1 */
+	radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_RDS;
+	retval = radio->set_register(radio, SYSCONFIG1);
+	if (retval < 0)
+		goto done;
+
+	/* powercfg */
+	radio->registers[POWERCFG] &= ~POWERCFG_DMUTE;
+	/* POWERCFG_ENABLE has to automatically go low */
+	radio->registers[POWERCFG] |= POWERCFG_ENABLE |	POWERCFG_DISABLE;
+	retval = radio->set_register(radio, POWERCFG);
+
+done:
+	return retval;
+}
+EXPORT_SYMBOL_GPL(si470x_stop);
+
+
+/*
+ * si470x_rds_on - switch on rds reception
+ */
+static int si470x_rds_on(struct si470x_device *radio)
+{
+	int retval;
+
+	/* sysconfig 1 */
+	radio->registers[SYSCONFIG1] |= SYSCONFIG1_RDS;
+	retval = radio->set_register(radio, SYSCONFIG1);
+	if (retval < 0)
+		radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_RDS;
+
+	return retval;
+}
+
+
+
+/**************************************************************************
+ * File Operations Interface
+ **************************************************************************/
+
+/*
+ * si470x_fops_read - read RDS data
+ */
+static ssize_t si470x_fops_read(struct file *file, char __user *buf,
+		size_t count, loff_t *ppos)
+{
+	struct si470x_device *radio = video_drvdata(file);
+	int retval = 0;
+	unsigned int block_count = 0;
+
+	/* switch on rds reception */
+	if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0)
+		si470x_rds_on(radio);
+
+	/* block if no new data available */
+	while (radio->wr_index == radio->rd_index) {
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EWOULDBLOCK;
+			goto done;
+		}
+		if (wait_event_interruptible(radio->read_queue,
+			radio->wr_index != radio->rd_index) < 0) {
+			retval = -EINTR;
+			goto done;
+		}
+	}
+
+	/* calculate block count from byte count */
+	count /= 3;
+
+	/* copy RDS block out of internal buffer and to user buffer */
+	while (block_count < count) {
+		if (radio->rd_index == radio->wr_index)
+			break;
+
+		/* always transfer rds complete blocks */
+		if (copy_to_user(buf, &radio->buffer[radio->rd_index], 3))
+			/* retval = -EFAULT; */
+			break;
+
+		/* increment and wrap read pointer */
+		radio->rd_index += 3;
+		if (radio->rd_index >= radio->buf_size)
+			radio->rd_index = 0;
+
+		/* increment counters */
+		block_count++;
+		buf += 3;
+		retval += 3;
+	}
+
+done:
+	return retval;
+}
+
+
+/*
+ * si470x_fops_poll - poll RDS data
+ */
+static __poll_t si470x_fops_poll(struct file *file,
+		struct poll_table_struct *pts)
+{
+	struct si470x_device *radio = video_drvdata(file);
+	__poll_t req_events = poll_requested_events(pts);
+	__poll_t retval = v4l2_ctrl_poll(file, pts);
+
+	if (req_events & (EPOLLIN | EPOLLRDNORM)) {
+		/* switch on rds reception */
+		if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0)
+			si470x_rds_on(radio);
+
+		poll_wait(file, &radio->read_queue, pts);
+
+		if (radio->rd_index != radio->wr_index)
+			retval |= EPOLLIN | EPOLLRDNORM;
+	}
+
+	return retval;
+}
+
+
+static int si470x_fops_open(struct file *file)
+{
+	struct si470x_device *radio = video_drvdata(file);
+
+	return radio->fops_open(file);
+}
+
+
+/*
+ * si470x_fops_release - file release
+ */
+static int si470x_fops_release(struct file *file)
+{
+	struct si470x_device *radio = video_drvdata(file);
+
+	return radio->fops_release(file);
+}
+
+
+/*
+ * si470x_fops - file operations interface
+ */
+static const struct v4l2_file_operations si470x_fops = {
+	.owner			= THIS_MODULE,
+	.read			= si470x_fops_read,
+	.poll			= si470x_fops_poll,
+	.unlocked_ioctl		= video_ioctl2,
+	.open			= si470x_fops_open,
+	.release		= si470x_fops_release,
+};
+
+
+
+/**************************************************************************
+ * Video4Linux Interface
+ **************************************************************************/
+
+
+static int si470x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct si470x_device *radio =
+		container_of(ctrl->handler, struct si470x_device, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_VOLUME:
+		radio->registers[SYSCONFIG2] &= ~SYSCONFIG2_VOLUME;
+		radio->registers[SYSCONFIG2] |= ctrl->val;
+		return radio->set_register(radio, SYSCONFIG2);
+	case V4L2_CID_AUDIO_MUTE:
+		if (ctrl->val)
+			radio->registers[POWERCFG] &= ~POWERCFG_DMUTE;
+		else
+			radio->registers[POWERCFG] |= POWERCFG_DMUTE;
+		return radio->set_register(radio, POWERCFG);
+	default:
+		return -EINVAL;
+	}
+}
+
+
+/*
+ * si470x_vidioc_g_tuner - get tuner attributes
+ */
+static int si470x_vidioc_g_tuner(struct file *file, void *priv,
+		struct v4l2_tuner *tuner)
+{
+	struct si470x_device *radio = video_drvdata(file);
+	int retval = 0;
+
+	if (tuner->index != 0)
+		return -EINVAL;
+
+	if (!radio->status_rssi_auto_update) {
+		retval = radio->get_register(radio, STATUSRSSI);
+		if (retval < 0)
+			return retval;
+	}
+
+	/* driver constants */
+	strscpy(tuner->name, "FM", sizeof(tuner->name));
+	tuner->type = V4L2_TUNER_RADIO;
+	tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			    V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO |
+			    V4L2_TUNER_CAP_HWSEEK_BOUNDED |
+			    V4L2_TUNER_CAP_HWSEEK_WRAP;
+	tuner->rangelow  =  76 * FREQ_MUL;
+	tuner->rangehigh = 108 * FREQ_MUL;
+
+	/* stereo indicator == stereo (instead of mono) */
+	if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0)
+		tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+	else
+		tuner->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	/* If there is a reliable method of detecting an RDS channel,
+	   then this code should check for that before setting this
+	   RDS subchannel. */
+	tuner->rxsubchans |= V4L2_TUNER_SUB_RDS;
+
+	/* mono/stereo selector */
+	if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0)
+		tuner->audmode = V4L2_TUNER_MODE_STEREO;
+	else
+		tuner->audmode = V4L2_TUNER_MODE_MONO;
+
+	/* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */
+	/* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */
+	tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI);
+	/* the ideal factor is 0xffff/75 = 873,8 */
+	tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10);
+	if (tuner->signal > 0xffff)
+		tuner->signal = 0xffff;
+
+	/* automatic frequency control: -1: freq to low, 1 freq to high */
+	/* AFCRL does only indicate that freq. differs, not if too low/high */
+	tuner->afc = (radio->registers[STATUSRSSI] & STATUSRSSI_AFCRL) ? 1 : 0;
+
+	return retval;
+}
+
+
+/*
+ * si470x_vidioc_s_tuner - set tuner attributes
+ */
+static int si470x_vidioc_s_tuner(struct file *file, void *priv,
+		const struct v4l2_tuner *tuner)
+{
+	struct si470x_device *radio = video_drvdata(file);
+
+	if (tuner->index != 0)
+		return -EINVAL;
+
+	/* mono/stereo selector */
+	switch (tuner->audmode) {
+	case V4L2_TUNER_MODE_MONO:
+		radio->registers[POWERCFG] |= POWERCFG_MONO;  /* force mono */
+		break;
+	case V4L2_TUNER_MODE_STEREO:
+	default:
+		radio->registers[POWERCFG] &= ~POWERCFG_MONO; /* try stereo */
+		break;
+	}
+
+	return radio->set_register(radio, POWERCFG);
+}
+
+
+/*
+ * si470x_vidioc_g_frequency - get tuner or modulator radio frequency
+ */
+static int si470x_vidioc_g_frequency(struct file *file, void *priv,
+		struct v4l2_frequency *freq)
+{
+	struct si470x_device *radio = video_drvdata(file);
+
+	if (freq->tuner != 0)
+		return -EINVAL;
+
+	freq->type = V4L2_TUNER_RADIO;
+	return si470x_get_freq(radio, &freq->frequency);
+}
+
+
+/*
+ * si470x_vidioc_s_frequency - set tuner or modulator radio frequency
+ */
+static int si470x_vidioc_s_frequency(struct file *file, void *priv,
+		const struct v4l2_frequency *freq)
+{
+	struct si470x_device *radio = video_drvdata(file);
+	int retval;
+
+	if (freq->tuner != 0)
+		return -EINVAL;
+
+	if (freq->frequency < bands[radio->band].rangelow ||
+	    freq->frequency > bands[radio->band].rangehigh) {
+		/* Switch to band 1 which covers everything we support */
+		retval = si470x_set_band(radio, 1);
+		if (retval)
+			return retval;
+	}
+	return si470x_set_freq(radio, freq->frequency);
+}
+
+
+/*
+ * si470x_vidioc_s_hw_freq_seek - set hardware frequency seek
+ */
+static int si470x_vidioc_s_hw_freq_seek(struct file *file, void *priv,
+		const struct v4l2_hw_freq_seek *seek)
+{
+	struct si470x_device *radio = video_drvdata(file);
+
+	if (seek->tuner != 0)
+		return -EINVAL;
+
+	if (file->f_flags & O_NONBLOCK)
+		return -EWOULDBLOCK;
+
+	return si470x_set_seek(radio, seek);
+}
+
+/*
+ * si470x_vidioc_enum_freq_bands - enumerate supported bands
+ */
+static int si470x_vidioc_enum_freq_bands(struct file *file, void *priv,
+					 struct v4l2_frequency_band *band)
+{
+	if (band->tuner != 0)
+		return -EINVAL;
+	if (band->index >= ARRAY_SIZE(bands))
+		return -EINVAL;
+	*band = bands[band->index];
+	return 0;
+}
+
+const struct v4l2_ctrl_ops si470x_ctrl_ops = {
+	.s_ctrl = si470x_s_ctrl,
+};
+EXPORT_SYMBOL_GPL(si470x_ctrl_ops);
+
+static int si470x_vidioc_querycap(struct file *file, void *priv,
+		struct v4l2_capability *capability)
+{
+	struct si470x_device *radio = video_drvdata(file);
+
+	return radio->vidioc_querycap(file, priv, capability);
+};
+
+/*
+ * si470x_ioctl_ops - video device ioctl operations
+ */
+static const struct v4l2_ioctl_ops si470x_ioctl_ops = {
+	.vidioc_querycap	= si470x_vidioc_querycap,
+	.vidioc_g_tuner		= si470x_vidioc_g_tuner,
+	.vidioc_s_tuner		= si470x_vidioc_s_tuner,
+	.vidioc_g_frequency	= si470x_vidioc_g_frequency,
+	.vidioc_s_frequency	= si470x_vidioc_s_frequency,
+	.vidioc_s_hw_freq_seek	= si470x_vidioc_s_hw_freq_seek,
+	.vidioc_enum_freq_bands = si470x_vidioc_enum_freq_bands,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+
+/*
+ * si470x_viddev_template - video device interface
+ */
+const struct video_device si470x_viddev_template = {
+	.fops			= &si470x_fops,
+	.name			= DRIVER_NAME,
+	.release		= video_device_release_empty,
+	.ioctl_ops		= &si470x_ioctl_ops,
+};
+EXPORT_SYMBOL_GPL(si470x_viddev_template);
+
+MODULE_DESCRIPTION("Core radio driver for Si470x FM Radio Receivers");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
new file mode 100644
index 000000000..a1e570af9
--- /dev/null
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/media/radio/si470x/radio-si470x-i2c.c
+ *
+ * I2C driver for radios with Silicon Labs Si470x FM Radio Receivers
+ *
+ * Copyright (c) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ */
+
+
+/* driver definitions */
+#define DRIVER_AUTHOR "Joonyoung Shim <jy0922.shim@samsung.com>"
+#define DRIVER_CARD "Silicon Labs Si470x FM Radio"
+#define DRIVER_DESC "I2C radio driver for Si470x FM Radio Receivers"
+#define DRIVER_VERSION "1.0.2"
+
+/* kernel includes */
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+
+#include "radio-si470x.h"
+
+
+/* I2C Device ID List */
+static const struct i2c_device_id si470x_i2c_id[] = {
+	/* Generic Entry */
+	{ .name = "si470x" },
+	/* Terminating entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, si470x_i2c_id);
+
+
+/**************************************************************************
+ * Module Parameters
+ **************************************************************************/
+
+/* Radio Nr */
+static int radio_nr = -1;
+module_param(radio_nr, int, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio Nr");
+
+/* RDS buffer blocks */
+static unsigned int rds_buf = 100;
+module_param(rds_buf, uint, 0444);
+MODULE_PARM_DESC(rds_buf, "RDS buffer entries: *100*");
+
+/* RDS maximum block errors */
+static unsigned short max_rds_errors = 1;
+/* 0 means   0  errors requiring correction */
+/* 1 means 1-2  errors requiring correction (used by original USBRadio.exe) */
+/* 2 means 3-5  errors requiring correction */
+/* 3 means   6+ errors or errors in checkword, correction not possible */
+module_param(max_rds_errors, ushort, 0644);
+MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*");
+
+
+
+/**************************************************************************
+ * I2C Definitions
+ **************************************************************************/
+
+/* Write starts with the upper byte of register 0x02 */
+#define WRITE_REG_NUM		8
+#define WRITE_INDEX(i)		(i + 0x02)
+
+/* Read starts with the upper byte of register 0x0a */
+#define READ_REG_NUM		RADIO_REGISTER_NUM
+#define READ_INDEX(i)		((i + RADIO_REGISTER_NUM - 0x0a) % READ_REG_NUM)
+
+
+
+/**************************************************************************
+ * General Driver Functions - REGISTERs
+ **************************************************************************/
+
+/*
+ * si470x_get_register - read register
+ */
+static int si470x_get_register(struct si470x_device *radio, int regnr)
+{
+	__be16 buf[READ_REG_NUM];
+	struct i2c_msg msgs[1] = {
+		{
+			.addr = radio->client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(u16) * READ_REG_NUM,
+			.buf = (void *)buf
+		},
+	};
+
+	if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
+		return -EIO;
+
+	radio->registers[regnr] = __be16_to_cpu(buf[READ_INDEX(regnr)]);
+
+	return 0;
+}
+
+
+/*
+ * si470x_set_register - write register
+ */
+static int si470x_set_register(struct si470x_device *radio, int regnr)
+{
+	int i;
+	__be16 buf[WRITE_REG_NUM];
+	struct i2c_msg msgs[1] = {
+		{
+			.addr = radio->client->addr,
+			.len = sizeof(u16) * WRITE_REG_NUM,
+			.buf = (void *)buf
+		},
+	};
+
+	for (i = 0; i < WRITE_REG_NUM; i++)
+		buf[i] = __cpu_to_be16(radio->registers[WRITE_INDEX(i)]);
+
+	if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+
+
+/**************************************************************************
+ * General Driver Functions - ENTIRE REGISTERS
+ **************************************************************************/
+
+/*
+ * si470x_get_all_registers - read entire registers
+ */
+static int si470x_get_all_registers(struct si470x_device *radio)
+{
+	int i;
+	__be16 buf[READ_REG_NUM];
+	struct i2c_msg msgs[1] = {
+		{
+			.addr = radio->client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(u16) * READ_REG_NUM,
+			.buf = (void *)buf
+		},
+	};
+
+	if (i2c_transfer(radio->client->adapter, msgs, 1) != 1)
+		return -EIO;
+
+	for (i = 0; i < READ_REG_NUM; i++)
+		radio->registers[i] = __be16_to_cpu(buf[READ_INDEX(i)]);
+
+	return 0;
+}
+
+
+
+/**************************************************************************
+ * File Operations Interface
+ **************************************************************************/
+
+/*
+ * si470x_fops_open - file open
+ */
+static int si470x_fops_open(struct file *file)
+{
+	struct si470x_device *radio = video_drvdata(file);
+	int retval = v4l2_fh_open(file);
+
+	if (retval)
+		return retval;
+
+	if (v4l2_fh_is_singular_file(file)) {
+		/* start radio */
+		retval = si470x_start(radio);
+		if (retval < 0)
+			goto done;
+
+		/* enable RDS / STC interrupt */
+		radio->registers[SYSCONFIG1] |= SYSCONFIG1_RDSIEN;
+		radio->registers[SYSCONFIG1] |= SYSCONFIG1_STCIEN;
+		radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_GPIO2;
+		radio->registers[SYSCONFIG1] |= 0x1 << 2;
+		retval = si470x_set_register(radio, SYSCONFIG1);
+	}
+
+done:
+	if (retval)
+		v4l2_fh_release(file);
+	return retval;
+}
+
+
+/*
+ * si470x_fops_release - file release
+ */
+static int si470x_fops_release(struct file *file)
+{
+	struct si470x_device *radio = video_drvdata(file);
+
+	if (v4l2_fh_is_singular_file(file))
+		/* stop radio */
+		si470x_stop(radio);
+
+	return v4l2_fh_release(file);
+}
+
+
+
+/**************************************************************************
+ * Video4Linux Interface
+ **************************************************************************/
+
+/*
+ * si470x_vidioc_querycap - query device capabilities
+ */
+static int si470x_vidioc_querycap(struct file *file, void *priv,
+				  struct v4l2_capability *capability)
+{
+	strscpy(capability->driver, DRIVER_NAME, sizeof(capability->driver));
+	strscpy(capability->card, DRIVER_CARD, sizeof(capability->card));
+	return 0;
+}
+
+
+
+/**************************************************************************
+ * I2C Interface
+ **************************************************************************/
+
+/*
+ * si470x_i2c_interrupt - interrupt handler
+ */
+static irqreturn_t si470x_i2c_interrupt(int irq, void *dev_id)
+{
+	struct si470x_device *radio = dev_id;
+	unsigned char regnr;
+	unsigned char blocknum;
+	unsigned short bler; /* rds block errors */
+	unsigned short rds;
+	unsigned char tmpbuf[3];
+	int retval = 0;
+
+	/* check Seek/Tune Complete */
+	retval = si470x_get_register(radio, STATUSRSSI);
+	if (retval < 0)
+		goto end;
+
+	if (radio->registers[STATUSRSSI] & STATUSRSSI_STC)
+		complete(&radio->completion);
+
+	/* safety checks */
+	if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0)
+		goto end;
+
+	/* Update RDS registers */
+	for (regnr = 1; regnr < RDS_REGISTER_NUM; regnr++) {
+		retval = si470x_get_register(radio, STATUSRSSI + regnr);
+		if (retval < 0)
+			goto end;
+	}
+
+	/* get rds blocks */
+	if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSR) == 0)
+		/* No RDS group ready, better luck next time */
+		goto end;
+
+	for (blocknum = 0; blocknum < 4; blocknum++) {
+		switch (blocknum) {
+		default:
+			bler = (radio->registers[STATUSRSSI] &
+					STATUSRSSI_BLERA) >> 9;
+			rds = radio->registers[RDSA];
+			break;
+		case 1:
+			bler = (radio->registers[READCHAN] &
+					READCHAN_BLERB) >> 14;
+			rds = radio->registers[RDSB];
+			break;
+		case 2:
+			bler = (radio->registers[READCHAN] &
+					READCHAN_BLERC) >> 12;
+			rds = radio->registers[RDSC];
+			break;
+		case 3:
+			bler = (radio->registers[READCHAN] &
+					READCHAN_BLERD) >> 10;
+			rds = radio->registers[RDSD];
+			break;
+		}
+
+		/* Fill the V4L2 RDS buffer */
+		put_unaligned_le16(rds, &tmpbuf);
+		tmpbuf[2] = blocknum;		/* offset name */
+		tmpbuf[2] |= blocknum << 3;	/* received offset */
+		if (bler > max_rds_errors)
+			tmpbuf[2] |= 0x80;	/* uncorrectable errors */
+		else if (bler > 0)
+			tmpbuf[2] |= 0x40;	/* corrected error(s) */
+
+		/* copy RDS block to internal buffer */
+		memcpy(&radio->buffer[radio->wr_index], &tmpbuf, 3);
+		radio->wr_index += 3;
+
+		/* wrap write pointer */
+		if (radio->wr_index >= radio->buf_size)
+			radio->wr_index = 0;
+
+		/* check for overflow */
+		if (radio->wr_index == radio->rd_index) {
+			/* increment and wrap read pointer */
+			radio->rd_index += 3;
+			if (radio->rd_index >= radio->buf_size)
+				radio->rd_index = 0;
+		}
+	}
+
+	if (radio->wr_index != radio->rd_index)
+		wake_up_interruptible(&radio->read_queue);
+
+end:
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * si470x_i2c_probe - probe for the device
+ */
+static int si470x_i2c_probe(struct i2c_client *client)
+{
+	struct si470x_device *radio;
+	int retval = 0;
+
+	/* private data allocation and initialization */
+	radio = devm_kzalloc(&client->dev, sizeof(*radio), GFP_KERNEL);
+	if (!radio) {
+		retval = -ENOMEM;
+		goto err_initial;
+	}
+
+	radio->client = client;
+	radio->band = 1; /* Default to 76 - 108 MHz */
+	mutex_init(&radio->lock);
+	init_completion(&radio->completion);
+
+	radio->get_register = si470x_get_register;
+	radio->set_register = si470x_set_register;
+	radio->fops_open = si470x_fops_open;
+	radio->fops_release = si470x_fops_release;
+	radio->vidioc_querycap = si470x_vidioc_querycap;
+
+	retval = v4l2_device_register(&client->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&client->dev, "couldn't register v4l2_device\n");
+		goto err_initial;
+	}
+
+	v4l2_ctrl_handler_init(&radio->hdl, 2);
+	v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops,
+			V4L2_CID_AUDIO_VOLUME, 0, 15, 1, 15);
+	if (radio->hdl.error) {
+		retval = radio->hdl.error;
+		dev_err(&client->dev, "couldn't register control\n");
+		goto err_all;
+	}
+
+	/* video device initialization */
+	radio->videodev = si470x_viddev_template;
+	radio->videodev.ctrl_handler = &radio->hdl;
+	radio->videodev.lock = &radio->lock;
+	radio->videodev.v4l2_dev = &radio->v4l2_dev;
+	radio->videodev.release = video_device_release_empty;
+	radio->videodev.device_caps =
+		V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_READWRITE | V4L2_CAP_TUNER |
+		V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE;
+	video_set_drvdata(&radio->videodev, radio);
+
+	radio->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
+						    GPIOD_OUT_LOW);
+	if (IS_ERR(radio->gpio_reset)) {
+		retval = PTR_ERR(radio->gpio_reset);
+		dev_err(&client->dev, "Failed to request gpio: %d\n", retval);
+		goto err_all;
+	}
+
+	if (radio->gpio_reset)
+		gpiod_set_value(radio->gpio_reset, 1);
+
+	/* power up : need 110ms */
+	radio->registers[POWERCFG] = POWERCFG_ENABLE;
+	if (si470x_set_register(radio, POWERCFG) < 0) {
+		retval = -EIO;
+		goto err_all;
+	}
+	msleep(110);
+
+	/* get device and chip versions */
+	if (si470x_get_all_registers(radio) < 0) {
+		retval = -EIO;
+		goto err_all;
+	}
+	dev_info(&client->dev, "DeviceID=0x%4.4hx ChipID=0x%4.4hx\n",
+			radio->registers[DEVICEID], radio->registers[SI_CHIPID]);
+	if ((radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE) < RADIO_FW_VERSION) {
+		dev_warn(&client->dev,
+			"This driver is known to work with firmware version %u, but the device has firmware version %u.\n"
+			"If you have some trouble using this driver, please report to V4L ML at linux-media@vger.kernel.org\n",
+			RADIO_FW_VERSION,
+			radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE);
+	}
+
+	/* set initial frequency */
+	si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
+
+	/* rds buffer allocation */
+	radio->buf_size = rds_buf * 3;
+	radio->buffer = devm_kmalloc(&client->dev, radio->buf_size, GFP_KERNEL);
+	if (!radio->buffer) {
+		retval = -EIO;
+		goto err_all;
+	}
+
+	/* rds buffer configuration */
+	radio->wr_index = 0;
+	radio->rd_index = 0;
+	init_waitqueue_head(&radio->read_queue);
+
+	retval = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					   si470x_i2c_interrupt,
+					   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					   DRIVER_NAME, radio);
+	if (retval) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_all;
+	}
+
+	/* register video device */
+	retval = video_register_device(&radio->videodev, VFL_TYPE_RADIO,
+			radio_nr);
+	if (retval) {
+		dev_warn(&client->dev, "Could not register video device\n");
+		goto err_all;
+	}
+	i2c_set_clientdata(client, radio);
+
+	return 0;
+err_all:
+	v4l2_ctrl_handler_free(&radio->hdl);
+	v4l2_device_unregister(&radio->v4l2_dev);
+err_initial:
+	return retval;
+}
+
+
+/*
+ * si470x_i2c_remove - remove the device
+ */
+static void si470x_i2c_remove(struct i2c_client *client)
+{
+	struct si470x_device *radio = i2c_get_clientdata(client);
+
+	video_unregister_device(&radio->videodev);
+
+	if (radio->gpio_reset)
+		gpiod_set_value(radio->gpio_reset, 0);
+
+	v4l2_ctrl_handler_free(&radio->hdl);
+	v4l2_device_unregister(&radio->v4l2_dev);
+}
+
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * si470x_i2c_suspend - suspend the device
+ */
+static int si470x_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct si470x_device *radio = i2c_get_clientdata(client);
+
+	/* power down */
+	radio->registers[POWERCFG] |= POWERCFG_DISABLE;
+	if (si470x_set_register(radio, POWERCFG) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+
+/*
+ * si470x_i2c_resume - resume the device
+ */
+static int si470x_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct si470x_device *radio = i2c_get_clientdata(client);
+
+	/* power up : need 110ms */
+	radio->registers[POWERCFG] |= POWERCFG_ENABLE;
+	if (si470x_set_register(radio, POWERCFG) < 0)
+		return -EIO;
+	msleep(110);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(si470x_i2c_pm, si470x_i2c_suspend, si470x_i2c_resume);
+#endif
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id si470x_of_match[] = {
+	{ .compatible = "silabs,si470x" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, si470x_of_match);
+#endif
+
+/*
+ * si470x_i2c_driver - i2c driver interface
+ */
+static struct i2c_driver si470x_i2c_driver = {
+	.driver = {
+		.name		= "si470x",
+		.of_match_table = of_match_ptr(si470x_of_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm		= &si470x_i2c_pm,
+#endif
+	},
+	.probe			= si470x_i2c_probe,
+	.remove			= si470x_i2c_remove,
+	.id_table		= si470x_i2c_id,
+};
+
+module_i2c_driver(si470x_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
new file mode 100644
index 000000000..869b1e7e3
--- /dev/null
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  drivers/media/radio/si470x/radio-si470x-usb.c
+ *
+ *  USB driver for radios with Silicon Labs Si470x FM Radio Receivers
+ *
+ *  Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net>
+ */
+
+
+/*
+ * ToDo:
+ * - add firmware download/update support
+ */
+
+
+/* driver definitions */
+#define DRIVER_AUTHOR "Tobias Lorenz <tobias.lorenz@gmx.net>"
+#define DRIVER_CARD "Silicon Labs Si470x FM Radio"
+#define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers"
+#define DRIVER_VERSION "1.0.10"
+
+/* kernel includes */
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include <linux/slab.h>
+
+#include "radio-si470x.h"
+
+
+/* USB Device ID List */
+static const struct usb_device_id si470x_usb_driver_id_table[] = {
+	/* Silicon Labs USB FM Radio Reference Design */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) },
+	/* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) },
+	/* KWorld USB FM Radio SnapMusic Mobile 700 (FM700) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) },
+	/* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) },
+	/* Axentia ALERT FM USB Receiver */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x12cf, 0x7111, USB_CLASS_HID, 0, 0) },
+	/* Terminating entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, si470x_usb_driver_id_table);
+
+
+
+/**************************************************************************
+ * Module Parameters
+ **************************************************************************/
+
+/* Radio Nr */
+static int radio_nr = -1;
+module_param(radio_nr, int, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio Nr");
+
+/* USB timeout */
+static unsigned int usb_timeout = 500;
+module_param(usb_timeout, uint, 0644);
+MODULE_PARM_DESC(usb_timeout, "USB timeout (ms): *500*");
+
+/* RDS buffer blocks */
+static unsigned int rds_buf = 100;
+module_param(rds_buf, uint, 0444);
+MODULE_PARM_DESC(rds_buf, "RDS buffer entries: *100*");
+
+/* RDS maximum block errors */
+static unsigned short max_rds_errors = 1;
+/* 0 means   0  errors requiring correction */
+/* 1 means 1-2  errors requiring correction (used by original USBRadio.exe) */
+/* 2 means 3-5  errors requiring correction */
+/* 3 means   6+ errors or errors in checkword, correction not possible */
+module_param(max_rds_errors, ushort, 0644);
+MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*");
+
+
+
+/**************************************************************************
+ * USB HID Reports
+ **************************************************************************/
+
+/* Reports 1-16 give direct read/write access to the 16 Si470x registers */
+/* with the (REPORT_ID - 1) corresponding to the register address across USB */
+/* endpoint 0 using GET_REPORT and SET_REPORT */
+#define REGISTER_REPORT_SIZE	(RADIO_REGISTER_SIZE + 1)
+#define REGISTER_REPORT(reg)	((reg) + 1)
+
+/* Report 17 gives direct read/write access to the entire Si470x register */
+/* map across endpoint 0 using GET_REPORT and SET_REPORT */
+#define ENTIRE_REPORT_SIZE	(RADIO_REGISTER_NUM * RADIO_REGISTER_SIZE + 1)
+#define ENTIRE_REPORT		17
+
+/* Report 18 is used to send the lowest 6 Si470x registers up the HID */
+/* interrupt endpoint 1 to Windows every 20 milliseconds for status */
+#define RDS_REPORT_SIZE		(RDS_REGISTER_NUM * RADIO_REGISTER_SIZE + 1)
+#define RDS_REPORT		18
+
+/* Report 19: LED state */
+#define LED_REPORT_SIZE		3
+#define LED_REPORT		19
+
+/* Report 19: stream */
+#define STREAM_REPORT_SIZE	3
+#define STREAM_REPORT		19
+
+/* Report 20: scratch */
+#define SCRATCH_PAGE_SIZE	63
+#define SCRATCH_REPORT_SIZE	(SCRATCH_PAGE_SIZE + 1)
+#define SCRATCH_REPORT		20
+
+/* Reports 19-22: flash upgrade of the C8051F321 */
+#define WRITE_REPORT_SIZE	4
+#define WRITE_REPORT		19
+#define FLASH_REPORT_SIZE	64
+#define FLASH_REPORT		20
+#define CRC_REPORT_SIZE		3
+#define CRC_REPORT		21
+#define RESPONSE_REPORT_SIZE	2
+#define RESPONSE_REPORT		22
+
+/* Report 23: currently unused, but can accept 60 byte reports on the HID */
+/* interrupt out endpoint 2 every 1 millisecond */
+#define UNUSED_REPORT		23
+
+#define MAX_REPORT_SIZE		64
+
+
+
+/**************************************************************************
+ * Software/Hardware Versions from Scratch Page
+ **************************************************************************/
+#define RADIO_HW_VERSION			1
+
+
+
+/**************************************************************************
+ * LED State Definitions
+ **************************************************************************/
+#define LED_COMMAND		0x35
+
+#define NO_CHANGE_LED		0x00
+#define ALL_COLOR_LED		0x01	/* streaming state */
+#define BLINK_GREEN_LED		0x02	/* connect state */
+#define BLINK_RED_LED		0x04
+#define BLINK_ORANGE_LED	0x10	/* disconnect state */
+#define SOLID_GREEN_LED		0x20	/* tuning/seeking state */
+#define SOLID_RED_LED		0x40	/* bootload state */
+#define SOLID_ORANGE_LED	0x80
+
+
+
+/**************************************************************************
+ * Stream State Definitions
+ **************************************************************************/
+#define STREAM_COMMAND	0x36
+#define STREAM_VIDPID	0x00
+#define STREAM_AUDIO	0xff
+
+
+
+/**************************************************************************
+ * Bootloader / Flash Commands
+ **************************************************************************/
+
+/* unique id sent to bootloader and required to put into a bootload state */
+#define UNIQUE_BL_ID		0x34
+
+/* mask for the flash data */
+#define FLASH_DATA_MASK		0x55
+
+/* bootloader commands */
+#define GET_SW_VERSION_COMMAND	0x00
+#define SET_PAGE_COMMAND	0x01
+#define ERASE_PAGE_COMMAND	0x02
+#define WRITE_PAGE_COMMAND	0x03
+#define CRC_ON_PAGE_COMMAND	0x04
+#define READ_FLASH_BYTE_COMMAND	0x05
+#define RESET_DEVICE_COMMAND	0x06
+#define GET_HW_VERSION_COMMAND	0x07
+#define BLANK			0xff
+
+/* bootloader command responses */
+#define COMMAND_OK		0x01
+#define COMMAND_FAILED		0x02
+#define COMMAND_PENDING		0x03
+
+
+
+/**************************************************************************
+ * General Driver Functions - REGISTER_REPORTs
+ **************************************************************************/
+
+/*
+ * si470x_get_report - receive a HID report
+ */
+static int si470x_get_report(struct si470x_device *radio, void *buf, int size)
+{
+	unsigned char *report = buf;
+	int retval;
+
+	retval = usb_control_msg(radio->usbdev,
+		usb_rcvctrlpipe(radio->usbdev, 0),
+		HID_REQ_GET_REPORT,
+		USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+		report[0], 2,
+		buf, size, usb_timeout);
+
+	if (retval < 0)
+		dev_warn(&radio->intf->dev,
+			"si470x_get_report: usb_control_msg returned %d\n",
+			retval);
+	return retval;
+}
+
+
+/*
+ * si470x_set_report - send a HID report
+ */
+static int si470x_set_report(struct si470x_device *radio, void *buf, int size)
+{
+	unsigned char *report = buf;
+	int retval;
+
+	retval = usb_control_msg(radio->usbdev,
+		usb_sndctrlpipe(radio->usbdev, 0),
+		HID_REQ_SET_REPORT,
+		USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+		report[0], 2,
+		buf, size, usb_timeout);
+
+	if (retval < 0)
+		dev_warn(&radio->intf->dev,
+			"si470x_set_report: usb_control_msg returned %d\n",
+			retval);
+	return retval;
+}
+
+
+/*
+ * si470x_get_register - read register
+ */
+static int si470x_get_register(struct si470x_device *radio, int regnr)
+{
+	int retval;
+
+	radio->usb_buf[0] = REGISTER_REPORT(regnr);
+
+	retval = si470x_get_report(radio, radio->usb_buf, REGISTER_REPORT_SIZE);
+
+	if (retval >= 0)
+		radio->registers[regnr] = get_unaligned_be16(&radio->usb_buf[1]);
+
+	return (retval < 0) ? -EINVAL : 0;
+}
+
+
+/*
+ * si470x_set_register - write register
+ */
+static int si470x_set_register(struct si470x_device *radio, int regnr)
+{
+	int retval;
+
+	radio->usb_buf[0] = REGISTER_REPORT(regnr);
+	put_unaligned_be16(radio->registers[regnr], &radio->usb_buf[1]);
+
+	retval = si470x_set_report(radio, radio->usb_buf, REGISTER_REPORT_SIZE);
+
+	return (retval < 0) ? -EINVAL : 0;
+}
+
+
+
+/**************************************************************************
+ * General Driver Functions - ENTIRE_REPORT
+ **************************************************************************/
+
+/*
+ * si470x_get_all_registers - read entire registers
+ */
+static int si470x_get_all_registers(struct si470x_device *radio)
+{
+	int retval;
+	unsigned char regnr;
+
+	radio->usb_buf[0] = ENTIRE_REPORT;
+
+	retval = si470x_get_report(radio, radio->usb_buf, ENTIRE_REPORT_SIZE);
+
+	if (retval >= 0)
+		for (regnr = 0; regnr < RADIO_REGISTER_NUM; regnr++)
+			radio->registers[regnr] = get_unaligned_be16(
+				&radio->usb_buf[regnr * RADIO_REGISTER_SIZE + 1]);
+
+	return (retval < 0) ? -EINVAL : 0;
+}
+
+
+
+/**************************************************************************
+ * General Driver Functions - LED_REPORT
+ **************************************************************************/
+
+/*
+ * si470x_set_led_state - sets the led state
+ */
+static int si470x_set_led_state(struct si470x_device *radio,
+		unsigned char led_state)
+{
+	int retval;
+
+	radio->usb_buf[0] = LED_REPORT;
+	radio->usb_buf[1] = LED_COMMAND;
+	radio->usb_buf[2] = led_state;
+
+	retval = si470x_set_report(radio, radio->usb_buf, LED_REPORT_SIZE);
+
+	return (retval < 0) ? -EINVAL : 0;
+}
+
+
+
+/**************************************************************************
+ * General Driver Functions - SCRATCH_REPORT
+ **************************************************************************/
+
+/*
+ * si470x_get_scratch_versions - gets the scratch page and version infos
+ */
+static int si470x_get_scratch_page_versions(struct si470x_device *radio)
+{
+	int retval;
+
+	radio->usb_buf[0] = SCRATCH_REPORT;
+
+	retval = si470x_get_report(radio, radio->usb_buf, SCRATCH_REPORT_SIZE);
+
+	if (retval < 0)
+		dev_warn(&radio->intf->dev, "si470x_get_scratch: si470x_get_report returned %d\n",
+			 retval);
+	else {
+		radio->software_version = radio->usb_buf[1];
+		radio->hardware_version = radio->usb_buf[2];
+	}
+
+	return (retval < 0) ? -EINVAL : 0;
+}
+
+
+
+/**************************************************************************
+ * RDS Driver Functions
+ **************************************************************************/
+
+/*
+ * si470x_int_in_callback - rds callback and processing function
+ *
+ * TODO: do we need to use mutex locks in some sections?
+ */
+static void si470x_int_in_callback(struct urb *urb)
+{
+	struct si470x_device *radio = urb->context;
+	int retval;
+	unsigned char regnr;
+	unsigned char blocknum;
+	unsigned short bler; /* rds block errors */
+	unsigned short rds;
+	unsigned char tmpbuf[3];
+
+	if (urb->status) {
+		if (urb->status == -ENOENT ||
+				urb->status == -ECONNRESET ||
+				urb->status == -ESHUTDOWN) {
+			return;
+		} else {
+			dev_warn(&radio->intf->dev,
+			 "non-zero urb status (%d)\n", urb->status);
+			goto resubmit; /* Maybe we can recover. */
+		}
+	}
+
+	/* Sometimes the device returns len 0 packets */
+	if (urb->actual_length != RDS_REPORT_SIZE)
+		goto resubmit;
+
+	radio->registers[STATUSRSSI] =
+		get_unaligned_be16(&radio->int_in_buffer[1]);
+
+	if (radio->registers[STATUSRSSI] & STATUSRSSI_STC)
+		complete(&radio->completion);
+
+	if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS)) {
+		/* Update RDS registers with URB data */
+		for (regnr = 1; regnr < RDS_REGISTER_NUM; regnr++)
+			radio->registers[STATUSRSSI + regnr] =
+			    get_unaligned_be16(&radio->int_in_buffer[
+				regnr * RADIO_REGISTER_SIZE + 1]);
+		/* get rds blocks */
+		if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSR) == 0) {
+			/* No RDS group ready, better luck next time */
+			goto resubmit;
+		}
+		if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSS) == 0) {
+			/* RDS decoder not synchronized */
+			goto resubmit;
+		}
+		for (blocknum = 0; blocknum < 4; blocknum++) {
+			switch (blocknum) {
+			default:
+				bler = (radio->registers[STATUSRSSI] &
+						STATUSRSSI_BLERA) >> 9;
+				rds = radio->registers[RDSA];
+				break;
+			case 1:
+				bler = (radio->registers[READCHAN] &
+						READCHAN_BLERB) >> 14;
+				rds = radio->registers[RDSB];
+				break;
+			case 2:
+				bler = (radio->registers[READCHAN] &
+						READCHAN_BLERC) >> 12;
+				rds = radio->registers[RDSC];
+				break;
+			case 3:
+				bler = (radio->registers[READCHAN] &
+						READCHAN_BLERD) >> 10;
+				rds = radio->registers[RDSD];
+				break;
+			}
+
+			/* Fill the V4L2 RDS buffer */
+			put_unaligned_le16(rds, &tmpbuf);
+			tmpbuf[2] = blocknum;		/* offset name */
+			tmpbuf[2] |= blocknum << 3;	/* received offset */
+			if (bler > max_rds_errors)
+				tmpbuf[2] |= 0x80; /* uncorrectable errors */
+			else if (bler > 0)
+				tmpbuf[2] |= 0x40; /* corrected error(s) */
+
+			/* copy RDS block to internal buffer */
+			memcpy(&radio->buffer[radio->wr_index], &tmpbuf, 3);
+			radio->wr_index += 3;
+
+			/* wrap write pointer */
+			if (radio->wr_index >= radio->buf_size)
+				radio->wr_index = 0;
+
+			/* check for overflow */
+			if (radio->wr_index == radio->rd_index) {
+				/* increment and wrap read pointer */
+				radio->rd_index += 3;
+				if (radio->rd_index >= radio->buf_size)
+					radio->rd_index = 0;
+			}
+		}
+		if (radio->wr_index != radio->rd_index)
+			wake_up_interruptible(&radio->read_queue);
+	}
+
+resubmit:
+	/* Resubmit if we're still running. */
+	if (radio->int_in_running && radio->usbdev) {
+		retval = usb_submit_urb(radio->int_in_urb, GFP_ATOMIC);
+		if (retval) {
+			dev_warn(&radio->intf->dev,
+			       "resubmitting urb failed (%d)", retval);
+			radio->int_in_running = 0;
+		}
+	}
+	radio->status_rssi_auto_update = radio->int_in_running;
+}
+
+
+static int si470x_fops_open(struct file *file)
+{
+	return v4l2_fh_open(file);
+}
+
+static int si470x_fops_release(struct file *file)
+{
+	return v4l2_fh_release(file);
+}
+
+static void si470x_usb_release(struct v4l2_device *v4l2_dev)
+{
+	struct si470x_device *radio =
+		container_of(v4l2_dev, struct si470x_device, v4l2_dev);
+
+	usb_free_urb(radio->int_in_urb);
+	v4l2_ctrl_handler_free(&radio->hdl);
+	v4l2_device_unregister(&radio->v4l2_dev);
+	kfree(radio->int_in_buffer);
+	kfree(radio->buffer);
+	kfree(radio->usb_buf);
+	kfree(radio);
+}
+
+
+/**************************************************************************
+ * Video4Linux Interface
+ **************************************************************************/
+
+/*
+ * si470x_vidioc_querycap - query device capabilities
+ */
+static int si470x_vidioc_querycap(struct file *file, void *priv,
+				  struct v4l2_capability *capability)
+{
+	struct si470x_device *radio = video_drvdata(file);
+
+	strscpy(capability->driver, DRIVER_NAME, sizeof(capability->driver));
+	strscpy(capability->card, DRIVER_CARD, sizeof(capability->card));
+	usb_make_path(radio->usbdev, capability->bus_info,
+			sizeof(capability->bus_info));
+	return 0;
+}
+
+
+static int si470x_start_usb(struct si470x_device *radio)
+{
+	int retval;
+
+	/* initialize interrupt urb */
+	usb_fill_int_urb(radio->int_in_urb, radio->usbdev,
+			usb_rcvintpipe(radio->usbdev,
+				radio->int_in_endpoint->bEndpointAddress),
+			radio->int_in_buffer,
+			le16_to_cpu(radio->int_in_endpoint->wMaxPacketSize),
+			si470x_int_in_callback,
+			radio,
+			radio->int_in_endpoint->bInterval);
+
+	radio->int_in_running = 1;
+	mb();
+
+	retval = usb_submit_urb(radio->int_in_urb, GFP_KERNEL);
+	if (retval) {
+		dev_info(&radio->intf->dev,
+				"submitting int urb failed (%d)\n", retval);
+		radio->int_in_running = 0;
+	}
+	radio->status_rssi_auto_update = radio->int_in_running;
+
+	/* start radio */
+	retval = si470x_start(radio);
+	if (retval < 0)
+		return retval;
+
+	v4l2_ctrl_handler_setup(&radio->hdl);
+
+	return retval;
+}
+
+/**************************************************************************
+ * USB Interface
+ **************************************************************************/
+
+/*
+ * si470x_usb_driver_probe - probe for the device
+ */
+static int si470x_usb_driver_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	struct si470x_device *radio;
+	struct usb_host_interface *iface_desc;
+	int int_end_size, retval;
+	unsigned char version_warning = 0;
+
+	/* private data allocation and initialization */
+	radio = kzalloc_obj(struct si470x_device);
+	if (!radio) {
+		retval = -ENOMEM;
+		goto err_initial;
+	}
+	radio->usb_buf = kmalloc(MAX_REPORT_SIZE, GFP_KERNEL);
+	if (radio->usb_buf == NULL) {
+		retval = -ENOMEM;
+		goto err_radio;
+	}
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->intf = intf;
+	radio->band = 1; /* Default to 76 - 108 MHz */
+	mutex_init(&radio->lock);
+	init_completion(&radio->completion);
+
+	radio->get_register = si470x_get_register;
+	radio->set_register = si470x_set_register;
+	radio->fops_open = si470x_fops_open;
+	radio->fops_release = si470x_fops_release;
+	radio->vidioc_querycap = si470x_vidioc_querycap;
+
+	iface_desc = intf->cur_altsetting;
+
+	/* Set up interrupt endpoint information. */
+	retval = usb_find_int_in_endpoint(iface_desc, &radio->int_in_endpoint);
+	if (retval) {
+		dev_info(&intf->dev, "could not find interrupt in endpoint\n");
+		retval = -EIO;
+		goto err_usbbuf;
+	}
+
+	int_end_size = le16_to_cpu(radio->int_in_endpoint->wMaxPacketSize);
+
+	radio->int_in_buffer = kmalloc(int_end_size, GFP_KERNEL);
+	if (!radio->int_in_buffer) {
+		dev_info(&intf->dev, "could not allocate int_in_buffer");
+		retval = -ENOMEM;
+		goto err_usbbuf;
+	}
+
+	radio->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!radio->int_in_urb) {
+		retval = -ENOMEM;
+		goto err_intbuffer;
+	}
+
+	radio->v4l2_dev.release = si470x_usb_release;
+
+	/*
+	 * The si470x SiLabs reference design uses the same USB IDs as
+	 * 'Thanko's Raremono' si4734 based receiver. So check here which we
+	 * have: attempt to read the device ID from the si470x: the lower 12
+	 * bits should be 0x0242 for the si470x.
+	 *
+	 * We use this check to determine which device we are dealing with.
+	 */
+	if (id->idVendor == 0x10c4 && id->idProduct == 0x818a) {
+		retval = usb_control_msg(radio->usbdev,
+				usb_rcvctrlpipe(radio->usbdev, 0),
+				HID_REQ_GET_REPORT,
+				USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+				1, 2,
+				radio->usb_buf, 3, 500);
+		if (retval != 3 ||
+		    (get_unaligned_be16(&radio->usb_buf[1]) & 0xfff) != 0x0242) {
+			dev_info(&intf->dev, "this is not a si470x device.\n");
+			retval = -ENODEV;
+			goto err_urb;
+		}
+	}
+
+	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&intf->dev, "couldn't register v4l2_device\n");
+		goto err_urb;
+	}
+
+	v4l2_ctrl_handler_init(&radio->hdl, 2);
+	v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops,
+			  V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops,
+			  V4L2_CID_AUDIO_VOLUME, 0, 15, 1, 15);
+	if (radio->hdl.error) {
+		retval = radio->hdl.error;
+		dev_err(&intf->dev, "couldn't register control\n");
+		goto err_dev;
+	}
+	radio->videodev = si470x_viddev_template;
+	radio->videodev.ctrl_handler = &radio->hdl;
+	radio->videodev.lock = &radio->lock;
+	radio->videodev.v4l2_dev = &radio->v4l2_dev;
+	radio->videodev.release = video_device_release_empty;
+	radio->videodev.device_caps =
+		V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_READWRITE | V4L2_CAP_TUNER |
+		V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE;
+	video_set_drvdata(&radio->videodev, radio);
+
+	/* get device and chip versions */
+	if (si470x_get_all_registers(radio) < 0) {
+		retval = -EIO;
+		goto err_ctrl;
+	}
+	dev_info(&intf->dev, "DeviceID=0x%4.4hx ChipID=0x%4.4hx\n",
+			radio->registers[DEVICEID], radio->registers[SI_CHIPID]);
+	if ((radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE) < RADIO_FW_VERSION) {
+		dev_warn(&intf->dev,
+			"This driver is known to work with firmware version %u, but the device has firmware version %u.\n",
+			RADIO_FW_VERSION,
+			radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE);
+		version_warning = 1;
+	}
+
+	/* get software and hardware versions */
+	if (si470x_get_scratch_page_versions(radio) < 0) {
+		retval = -EIO;
+		goto err_ctrl;
+	}
+	dev_info(&intf->dev, "software version %d, hardware version %d\n",
+			radio->software_version, radio->hardware_version);
+	if (radio->hardware_version < RADIO_HW_VERSION) {
+		dev_warn(&intf->dev,
+			"This driver is known to work with hardware version %u, but the device has hardware version %u.\n",
+			RADIO_HW_VERSION,
+			radio->hardware_version);
+		version_warning = 1;
+	}
+
+	/* give out version warning */
+	if (version_warning == 1) {
+		dev_warn(&intf->dev,
+			"If you have some trouble using this driver, please report to V4L ML at linux-media@vger.kernel.org\n");
+	}
+
+	/* set led to connect state */
+	si470x_set_led_state(radio, BLINK_GREEN_LED);
+
+	/* rds buffer allocation */
+	radio->buf_size = rds_buf * 3;
+	radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
+	if (!radio->buffer) {
+		retval = -EIO;
+		goto err_ctrl;
+	}
+
+	/* rds buffer configuration */
+	radio->wr_index = 0;
+	radio->rd_index = 0;
+	init_waitqueue_head(&radio->read_queue);
+	usb_set_intfdata(intf, radio);
+
+	/* start radio */
+	retval = si470x_start_usb(radio);
+	if (retval < 0 && !radio->int_in_running)
+		goto err_buf;
+	else if (retval < 0)	/* in case of radio->int_in_running == 1 */
+		goto err_all;
+
+	/* set initial frequency */
+	si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
+
+	/* register video device */
+	retval = video_register_device(&radio->videodev, VFL_TYPE_RADIO,
+			radio_nr);
+	if (retval) {
+		dev_err(&intf->dev, "Could not register video device\n");
+		goto err_all;
+	}
+
+	return 0;
+err_all:
+	usb_kill_urb(radio->int_in_urb);
+err_buf:
+	kfree(radio->buffer);
+err_ctrl:
+	v4l2_ctrl_handler_free(&radio->hdl);
+err_dev:
+	v4l2_device_unregister(&radio->v4l2_dev);
+err_urb:
+	usb_free_urb(radio->int_in_urb);
+err_intbuffer:
+	kfree(radio->int_in_buffer);
+err_usbbuf:
+	kfree(radio->usb_buf);
+err_radio:
+	kfree(radio);
+err_initial:
+	return retval;
+}
+
+
+/*
+ * si470x_usb_driver_suspend - suspend the device
+ */
+static int si470x_usb_driver_suspend(struct usb_interface *intf,
+		pm_message_t message)
+{
+	struct si470x_device *radio = usb_get_intfdata(intf);
+
+	dev_info(&intf->dev, "suspending now...\n");
+
+	/* shutdown interrupt handler */
+	if (radio->int_in_running) {
+		radio->int_in_running = 0;
+		if (radio->int_in_urb)
+			usb_kill_urb(radio->int_in_urb);
+	}
+
+	/* cancel read processes */
+	wake_up_interruptible(&radio->read_queue);
+
+	/* stop radio */
+	si470x_stop(radio);
+	return 0;
+}
+
+
+/*
+ * si470x_usb_driver_resume - resume the device
+ */
+static int si470x_usb_driver_resume(struct usb_interface *intf)
+{
+	struct si470x_device *radio = usb_get_intfdata(intf);
+	int ret;
+
+	dev_info(&intf->dev, "resuming now...\n");
+
+	/* start radio */
+	ret = si470x_start_usb(radio);
+	if (ret == 0)
+		v4l2_ctrl_handler_setup(&radio->hdl);
+
+	return ret;
+}
+
+
+/*
+ * si470x_usb_driver_disconnect - disconnect the device
+ */
+static void si470x_usb_driver_disconnect(struct usb_interface *intf)
+{
+	struct si470x_device *radio = usb_get_intfdata(intf);
+
+	mutex_lock(&radio->lock);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	video_unregister_device(&radio->videodev);
+	usb_kill_urb(radio->int_in_urb);
+	usb_set_intfdata(intf, NULL);
+	mutex_unlock(&radio->lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+
+/*
+ * si470x_usb_driver - usb driver interface
+ *
+ * A note on suspend/resume: this driver had only empty suspend/resume
+ * functions, and when I tried to test suspend/resume it always disconnected
+ * instead of resuming (using my ADS InstantFM stick). So I've decided to
+ * remove these callbacks until someone else with better hardware can
+ * implement and test this.
+ */
+static struct usb_driver si470x_usb_driver = {
+	.name			= DRIVER_NAME,
+	.probe			= si470x_usb_driver_probe,
+	.disconnect		= si470x_usb_driver_disconnect,
+	.suspend		= si470x_usb_driver_suspend,
+	.resume			= si470x_usb_driver_resume,
+	.reset_resume		= si470x_usb_driver_resume,
+	.id_table		= si470x_usb_driver_id_table,
+};
+
+module_usb_driver(si470x_usb_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/media/radio/si470x/radio-si470x.h b/drivers/media/radio/si470x/radio-si470x.h
new file mode 100644
index 000000000..2915c0023
--- /dev/null
+++ b/drivers/media/radio/si470x/radio-si470x.h
@@ -0,0 +1,220 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  drivers/media/radio/si470x/radio-si470x.h
+ *
+ *  Driver for radios with Silicon Labs Si470x FM Radio Receivers
+ *
+ *  Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net>
+ */
+
+
+/* driver definitions */
+#define DRIVER_NAME "radio-si470x"
+
+
+/* kernel includes */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/videodev2.h>
+#include <linux/mutex.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-device.h>
+#include <linux/unaligned.h>
+
+
+
+/**************************************************************************
+ * Register Definitions
+ **************************************************************************/
+#define RADIO_REGISTER_SIZE	2	/* 16 register bit width */
+#define RADIO_REGISTER_NUM	16	/* DEVICEID   ... RDSD */
+#define RDS_REGISTER_NUM	6	/* STATUSRSSI ... RDSD */
+
+#define DEVICEID		0	/* Device ID */
+#define DEVICEID_PN		0xf000	/* bits 15..12: Part Number */
+#define DEVICEID_MFGID		0x0fff	/* bits 11..00: Manufacturer ID */
+
+#define SI_CHIPID		1	/* Chip ID */
+#define SI_CHIPID_REV		0xfc00	/* bits 15..10: Chip Version */
+#define SI_CHIPID_DEV		0x0200	/* bits 09..09: Device */
+#define SI_CHIPID_FIRMWARE	0x01ff	/* bits 08..00: Firmware Version */
+
+#define POWERCFG		2	/* Power Configuration */
+#define POWERCFG_DSMUTE		0x8000	/* bits 15..15: Softmute Disable */
+#define POWERCFG_DMUTE		0x4000	/* bits 14..14: Mute Disable */
+#define POWERCFG_MONO		0x2000	/* bits 13..13: Mono Select */
+#define POWERCFG_RDSM		0x0800	/* bits 11..11: RDS Mode (Si4701 only) */
+#define POWERCFG_SKMODE		0x0400	/* bits 10..10: Seek Mode */
+#define POWERCFG_SEEKUP		0x0200	/* bits 09..09: Seek Direction */
+#define POWERCFG_SEEK		0x0100	/* bits 08..08: Seek */
+#define POWERCFG_DISABLE	0x0040	/* bits 06..06: Powerup Disable */
+#define POWERCFG_ENABLE		0x0001	/* bits 00..00: Powerup Enable */
+
+#define CHANNEL			3	/* Channel */
+#define CHANNEL_TUNE		0x8000	/* bits 15..15: Tune */
+#define CHANNEL_CHAN		0x03ff	/* bits 09..00: Channel Select */
+
+#define SYSCONFIG1		4	/* System Configuration 1 */
+#define SYSCONFIG1_RDSIEN	0x8000	/* bits 15..15: RDS Interrupt Enable (Si4701 only) */
+#define SYSCONFIG1_STCIEN	0x4000	/* bits 14..14: Seek/Tune Complete Interrupt Enable */
+#define SYSCONFIG1_RDS		0x1000	/* bits 12..12: RDS Enable (Si4701 only) */
+#define SYSCONFIG1_DE		0x0800	/* bits 11..11: De-emphasis (0=75us 1=50us) */
+#define SYSCONFIG1_AGCD		0x0400	/* bits 10..10: AGC Disable */
+#define SYSCONFIG1_BLNDADJ	0x00c0	/* bits 07..06: Stereo/Mono Blend Level Adjustment */
+#define SYSCONFIG1_GPIO3	0x0030	/* bits 05..04: General Purpose I/O 3 */
+#define SYSCONFIG1_GPIO2	0x000c	/* bits 03..02: General Purpose I/O 2 */
+#define SYSCONFIG1_GPIO2_DIS	0x0000	/* Disable GPIO 2 interrupt */
+#define SYSCONFIG1_GPIO2_INT	0x0004	/* Enable STC/RDS interrupt */
+#define SYSCONFIG1_GPIO1	0x0003	/* bits 01..00: General Purpose I/O 1 */
+
+#define SYSCONFIG2		5	/* System Configuration 2 */
+#define SYSCONFIG2_SEEKTH	0xff00	/* bits 15..08: RSSI Seek Threshold */
+#define SYSCONFIG2_BAND		0x00c0	/* bits 07..06: Band Select */
+#define SYSCONFIG2_SPACE	0x0030	/* bits 05..04: Channel Spacing */
+#define SYSCONFIG2_VOLUME	0x000f	/* bits 03..00: Volume */
+
+#define SYSCONFIG3		6	/* System Configuration 3 */
+#define SYSCONFIG3_SMUTER	0xc000	/* bits 15..14: Softmute Attack/Recover Rate */
+#define SYSCONFIG3_SMUTEA	0x3000	/* bits 13..12: Softmute Attenuation */
+#define SYSCONFIG3_SKSNR	0x00f0	/* bits 07..04: Seek SNR Threshold */
+#define SYSCONFIG3_SKCNT	0x000f	/* bits 03..00: Seek FM Impulse Detection Threshold */
+
+#define TEST1			7	/* Test 1 */
+#define TEST1_AHIZEN		0x4000	/* bits 14..14: Audio High-Z Enable */
+
+#define TEST2			8	/* Test 2 */
+/* TEST2 only contains reserved bits */
+
+#define BOOTCONFIG		9	/* Boot Configuration */
+/* BOOTCONFIG only contains reserved bits */
+
+#define STATUSRSSI		10	/* Status RSSI */
+#define STATUSRSSI_RDSR		0x8000	/* bits 15..15: RDS Ready (Si4701 only) */
+#define STATUSRSSI_STC		0x4000	/* bits 14..14: Seek/Tune Complete */
+#define STATUSRSSI_SF		0x2000	/* bits 13..13: Seek Fail/Band Limit */
+#define STATUSRSSI_AFCRL	0x1000	/* bits 12..12: AFC Rail */
+#define STATUSRSSI_RDSS		0x0800	/* bits 11..11: RDS Synchronized (Si4701 only) */
+#define STATUSRSSI_BLERA	0x0600	/* bits 10..09: RDS Block A Errors (Si4701 only) */
+#define STATUSRSSI_ST		0x0100	/* bits 08..08: Stereo Indicator */
+#define STATUSRSSI_RSSI		0x00ff	/* bits 07..00: RSSI (Received Signal Strength Indicator) */
+
+#define READCHAN		11	/* Read Channel */
+#define READCHAN_BLERB		0xc000	/* bits 15..14: RDS Block D Errors (Si4701 only) */
+#define READCHAN_BLERC		0x3000	/* bits 13..12: RDS Block C Errors (Si4701 only) */
+#define READCHAN_BLERD		0x0c00	/* bits 11..10: RDS Block B Errors (Si4701 only) */
+#define READCHAN_READCHAN	0x03ff	/* bits 09..00: Read Channel */
+
+#define RDSA			12	/* RDSA */
+#define RDSA_RDSA		0xffff	/* bits 15..00: RDS Block A Data (Si4701 only) */
+
+#define RDSB			13	/* RDSB */
+#define RDSB_RDSB		0xffff	/* bits 15..00: RDS Block B Data (Si4701 only) */
+
+#define RDSC			14	/* RDSC */
+#define RDSC_RDSC		0xffff	/* bits 15..00: RDS Block C Data (Si4701 only) */
+
+#define RDSD			15	/* RDSD */
+#define RDSD_RDSD		0xffff	/* bits 15..00: RDS Block D Data (Si4701 only) */
+
+
+
+/**************************************************************************
+ * General Driver Definitions
+ **************************************************************************/
+
+/*
+ * si470x_device - private data
+ */
+struct si470x_device {
+	struct v4l2_device v4l2_dev;
+	struct video_device videodev;
+	struct v4l2_ctrl_handler hdl;
+	int band;
+
+	/* Silabs internal registers (0..15) */
+	unsigned short registers[RADIO_REGISTER_NUM];
+
+	/* RDS receive buffer */
+	wait_queue_head_t read_queue;
+	struct mutex lock;		/* buffer locking */
+	unsigned char *buffer;		/* size is always multiple of three */
+	unsigned int buf_size;
+	unsigned int rd_index;
+	unsigned int wr_index;
+
+	struct completion completion;
+	bool status_rssi_auto_update;	/* Does RSSI get updated automatic? */
+
+	/* si470x ops */
+
+	int (*get_register)(struct si470x_device *radio, int regnr);
+	int (*set_register)(struct si470x_device *radio, int regnr);
+	int (*fops_open)(struct file *file);
+	int (*fops_release)(struct file *file);
+	int (*vidioc_querycap)(struct file *file, void *priv,
+			       struct v4l2_capability *capability);
+
+#if IS_ENABLED(CONFIG_USB_SI470X)
+	/* reference to USB and video device */
+	struct usb_device *usbdev;
+	struct usb_interface *intf;
+	char *usb_buf;
+
+	/* Interrupt endpoint handling */
+	char *int_in_buffer;
+	struct usb_endpoint_descriptor *int_in_endpoint;
+	struct urb *int_in_urb;
+	int int_in_running;
+
+	/* scratch page */
+	unsigned char software_version;
+	unsigned char hardware_version;
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_SI470X)
+	struct i2c_client *client;
+	struct gpio_desc *gpio_reset;
+#endif
+};
+
+
+
+/**************************************************************************
+ * Firmware Versions
+ **************************************************************************/
+
+#define RADIO_FW_VERSION	12
+
+
+
+/**************************************************************************
+ * Frequency Multiplicator
+ **************************************************************************/
+
+/*
+ * The frequency is set in units of 62.5 Hz when using V4L2_TUNER_CAP_LOW,
+ * 62.5 kHz otherwise.
+ * The tuner is able to have a channel spacing of 50, 100 or 200 kHz.
+ * tuner->capability is therefore set to V4L2_TUNER_CAP_LOW
+ * The FREQ_MUL is then: 1 MHz / 62.5 Hz = 16000
+ */
+#define FREQ_MUL (1000000 / 62.5)
+
+
+
+/**************************************************************************
+ * Common Functions
+ **************************************************************************/
+extern const struct video_device si470x_viddev_template;
+extern const struct v4l2_ctrl_ops si470x_ctrl_ops;
+int si470x_disconnect_check(struct si470x_device *radio);
+int si470x_set_freq(struct si470x_device *radio, unsigned int freq);
+int si470x_start(struct si470x_device *radio);
+int si470x_stop(struct si470x_device *radio);
diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig
new file mode 100644
index 000000000..490bc6f20
--- /dev/null
+++ b/drivers/media/radio/si4713/Kconfig
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config USB_SI4713
+	tristate "Silicon Labs Si4713 FM Radio Transmitter support with USB"
+	depends on USB && I2C && RADIO_SI4713
+	select I2C_SI4713
+	help
+	  This is a driver for USB devices with the Silicon Labs SI4713
+	  chip. Currently these devices are known to work.
+	  - 10c4:8244: Silicon Labs FM Transmitter USB device.
+
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-usb-si4713.
+
+config PLATFORM_SI4713
+	tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C"
+	depends on I2C && RADIO_SI4713
+	select I2C_SI4713
+	help
+	  This is a driver for I2C devices with the Silicon Labs SI4713
+	  chip.
+
+	  Say Y here if you want to connect this type of radio to your
+	  computer's I2C port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-platform-si4713.
+
+config I2C_SI4713
+	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
+	depends on I2C && RADIO_SI4713
+	help
+	  Say Y here if you want support to Si4713 FM Radio Transmitter.
+	  This device can transmit audio through FM. It can transmit
+	  RDS and RBDS signals as well. This module is the v4l2 radio
+	  interface for the i2c driver of this device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called si4713.
diff --git a/drivers/media/radio/si4713/Makefile b/drivers/media/radio/si4713/Makefile
new file mode 100644
index 000000000..3411514a5
--- /dev/null
+++ b/drivers/media/radio/si4713/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for radios with Silicon Labs Si4713 FM Radio Transmitters
+#
+
+obj-$(CONFIG_I2C_SI4713) += si4713.o
+obj-$(CONFIG_USB_SI4713) += radio-usb-si4713.o
+obj-$(CONFIG_PLATFORM_SI4713) += radio-platform-si4713.o
diff --git a/drivers/media/radio/si4713/radio-platform-si4713.c b/drivers/media/radio/si4713/radio-platform-si4713.c
new file mode 100644
index 000000000..413296811
--- /dev/null
+++ b/drivers/media/radio/si4713/radio-platform-si4713.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/media/radio/radio-si4713.c
+ *
+ * Platform Driver for Silicon Labs Si4713 FM Radio Transmitter:
+ *
+ * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include "si4713.h"
+
+/* module parameters */
+static int radio_nr = -1;	/* radio device minor (-1 ==> auto assign) */
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr,
+		 "Minor number for radio device (-1 ==> auto assign)");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>");
+MODULE_DESCRIPTION("Platform driver for Si4713 FM Radio Transmitter");
+MODULE_VERSION("0.0.1");
+MODULE_ALIAS("platform:radio-si4713");
+
+/* Driver state struct */
+struct radio_si4713_device {
+	struct v4l2_device		v4l2_dev;
+	struct video_device		radio_dev;
+	struct mutex lock;
+};
+
+/* radio_si4713_fops - file operations interface */
+static const struct v4l2_file_operations radio_si4713_fops = {
+	.owner		= THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = v4l2_fh_release,
+	.poll = v4l2_ctrl_poll,
+	/* Note: locking is done at the subdev level in the i2c driver. */
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+/* Video4Linux Interface */
+
+/* radio_si4713_querycap - query device capabilities */
+static int radio_si4713_querycap(struct file *file, void *priv,
+					struct v4l2_capability *capability)
+{
+	strscpy(capability->driver, "radio-si4713", sizeof(capability->driver));
+	strscpy(capability->card, "Silicon Labs Si4713 Modulator",
+		sizeof(capability->card));
+	strscpy(capability->bus_info, "platform:radio-si4713",
+		sizeof(capability->bus_info));
+	return 0;
+}
+
+/*
+ * v4l2 ioctl call backs.
+ * we are just a wrapper for v4l2_sub_devs.
+ */
+static inline struct v4l2_device *get_v4l2_dev(struct file *file)
+{
+	return &((struct radio_si4713_device *)video_drvdata(file))->v4l2_dev;
+}
+
+static int radio_si4713_g_modulator(struct file *file, void *priv,
+				    struct v4l2_modulator *vm)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+					  g_modulator, vm);
+}
+
+static int radio_si4713_s_modulator(struct file *file, void *priv,
+				    const struct v4l2_modulator *vm)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+					  s_modulator, vm);
+}
+
+static int radio_si4713_g_frequency(struct file *file, void *priv,
+				    struct v4l2_frequency *vf)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+					  g_frequency, vf);
+}
+
+static int radio_si4713_s_frequency(struct file *file, void *priv,
+				    const struct v4l2_frequency *vf)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+					  s_frequency, vf);
+}
+
+static long radio_si4713_default(struct file *file, void *priv,
+				 bool valid_prio, unsigned int cmd, void *arg)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, core,
+					  ioctl, cmd, arg);
+}
+
+static const struct v4l2_ioctl_ops radio_si4713_ioctl_ops = {
+	.vidioc_querycap	= radio_si4713_querycap,
+	.vidioc_g_modulator	= radio_si4713_g_modulator,
+	.vidioc_s_modulator	= radio_si4713_s_modulator,
+	.vidioc_g_frequency	= radio_si4713_g_frequency,
+	.vidioc_s_frequency	= radio_si4713_s_frequency,
+	.vidioc_log_status      = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+	.vidioc_default		= radio_si4713_default,
+};
+
+/* radio_si4713_vdev_template - video device interface */
+static const struct video_device radio_si4713_vdev_template = {
+	.fops			= &radio_si4713_fops,
+	.name			= "radio-si4713",
+	.release		= video_device_release_empty,
+	.ioctl_ops		= &radio_si4713_ioctl_ops,
+	.vfl_dir		= VFL_DIR_TX,
+};
+
+/* Platform driver interface */
+/* radio_si4713_pdriver_probe - probe for the device */
+static int radio_si4713_pdriver_probe(struct platform_device *pdev)
+{
+	struct radio_si4713_platform_data *pdata = pdev->dev.platform_data;
+	struct radio_si4713_device *rsdev;
+	struct v4l2_subdev *sd;
+	int rval = 0;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Cannot proceed without platform data.\n");
+		rval = -EINVAL;
+		goto exit;
+	}
+
+	rsdev = devm_kzalloc(&pdev->dev, sizeof(*rsdev), GFP_KERNEL);
+	if (!rsdev) {
+		dev_err(&pdev->dev, "Failed to alloc video device.\n");
+		rval = -ENOMEM;
+		goto exit;
+	}
+	mutex_init(&rsdev->lock);
+
+	rval = v4l2_device_register(&pdev->dev, &rsdev->v4l2_dev);
+	if (rval) {
+		dev_err(&pdev->dev, "Failed to register v4l2 device.\n");
+		goto exit;
+	}
+
+	sd = i2c_get_clientdata(pdata->subdev);
+	rval = v4l2_device_register_subdev(&rsdev->v4l2_dev, sd);
+	if (rval) {
+		dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n");
+		goto unregister_v4l2_dev;
+	}
+
+	rsdev->radio_dev = radio_si4713_vdev_template;
+	rsdev->radio_dev.v4l2_dev = &rsdev->v4l2_dev;
+	rsdev->radio_dev.ctrl_handler = sd->ctrl_handler;
+	/* Serialize all access to the si4713 */
+	rsdev->radio_dev.lock = &rsdev->lock;
+	rsdev->radio_dev.device_caps = V4L2_CAP_MODULATOR | V4L2_CAP_RDS_OUTPUT;
+	video_set_drvdata(&rsdev->radio_dev, rsdev);
+	if (video_register_device(&rsdev->radio_dev, VFL_TYPE_RADIO, radio_nr)) {
+		dev_err(&pdev->dev, "Could not register video device.\n");
+		rval = -EIO;
+		goto unregister_v4l2_dev;
+	}
+	dev_info(&pdev->dev, "New device successfully probed\n");
+
+	goto exit;
+
+unregister_v4l2_dev:
+	v4l2_device_unregister(&rsdev->v4l2_dev);
+exit:
+	return rval;
+}
+
+/* radio_si4713_pdriver_remove - remove the device */
+static void radio_si4713_pdriver_remove(struct platform_device *pdev)
+{
+	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
+	struct radio_si4713_device *rsdev;
+
+	rsdev = container_of(v4l2_dev, struct radio_si4713_device, v4l2_dev);
+	video_unregister_device(&rsdev->radio_dev);
+	v4l2_device_unregister(&rsdev->v4l2_dev);
+}
+
+static struct platform_driver radio_si4713_pdriver = {
+	.driver		= {
+		.name	= "radio-si4713",
+	},
+	.probe		= radio_si4713_pdriver_probe,
+	.remove         = radio_si4713_pdriver_remove,
+};
+
+module_platform_driver(radio_si4713_pdriver);
diff --git a/drivers/media/radio/si4713/radio-usb-si4713.c b/drivers/media/radio/si4713/radio-usb-si4713.c
new file mode 100644
index 000000000..6e6764143
--- /dev/null
+++ b/drivers/media/radio/si4713/radio-usb-si4713.c
@@ -0,0 +1,522 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates.
+ * All rights reserved.
+ */
+
+/* kernel includes */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+/* V4l includes */
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include <linux/platform_data/media/si4713.h>
+
+#include "si4713.h"
+
+/* driver and module definitions */
+MODULE_AUTHOR("Dinesh Ram <dinesh.ram@cern.ch>");
+MODULE_DESCRIPTION("Si4713 FM Transmitter USB driver");
+MODULE_LICENSE("GPL v2");
+
+/* The Device announces itself as Cygnal Integrated Products, Inc. */
+#define USB_SI4713_VENDOR		0x10c4
+#define USB_SI4713_PRODUCT		0x8244
+
+#define BUFFER_LENGTH			64
+#define USB_TIMEOUT			1000
+#define USB_RESP_TIMEOUT		50000
+
+/* USB Device ID List */
+static const struct usb_device_id usb_si4713_usb_device_table[] = {
+	{USB_DEVICE_AND_INTERFACE_INFO(USB_SI4713_VENDOR, USB_SI4713_PRODUCT,
+							USB_CLASS_HID, 0, 0) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_si4713_usb_device_table);
+
+struct si4713_usb_device {
+	struct usb_device	*usbdev;
+	struct usb_interface	*intf;
+	struct video_device	vdev;
+	struct v4l2_device	v4l2_dev;
+	struct v4l2_subdev	*v4l2_subdev;
+	struct mutex		lock;
+	struct i2c_adapter	i2c_adapter;
+
+	u8			*buffer;
+};
+
+static inline struct si4713_usb_device *to_si4713_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct si4713_usb_device, v4l2_dev);
+}
+
+static int vidioc_querycap(struct file *file, void *priv,
+					struct v4l2_capability *v)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	strscpy(v->driver, "radio-usb-si4713", sizeof(v->driver));
+	strscpy(v->card, "Si4713 FM Transmitter", sizeof(v->card));
+	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
+	return 0;
+}
+
+static int vidioc_g_modulator(struct file *file, void *priv,
+				struct v4l2_modulator *vm)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	return v4l2_subdev_call(radio->v4l2_subdev, tuner, g_modulator, vm);
+}
+
+static int vidioc_s_modulator(struct file *file, void *priv,
+				const struct v4l2_modulator *vm)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	return v4l2_subdev_call(radio->v4l2_subdev, tuner, s_modulator, vm);
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *vf)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	return v4l2_subdev_call(radio->v4l2_subdev, tuner, s_frequency, vf);
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *vf)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	return v4l2_subdev_call(radio->v4l2_subdev, tuner, g_frequency, vf);
+}
+
+static const struct v4l2_ioctl_ops usb_si4713_ioctl_ops = {
+	.vidioc_querycap	  = vidioc_querycap,
+	.vidioc_g_modulator	  = vidioc_g_modulator,
+	.vidioc_s_modulator	  = vidioc_s_modulator,
+	.vidioc_g_frequency	  = vidioc_g_frequency,
+	.vidioc_s_frequency	  = vidioc_s_frequency,
+	.vidioc_log_status	  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event   = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/* File system interface */
+static const struct v4l2_file_operations usb_si4713_fops = {
+	.owner		= THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = v4l2_fh_release,
+	.poll           = v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static void usb_si4713_video_device_release(struct v4l2_device *v4l2_dev)
+{
+	struct si4713_usb_device *radio = to_si4713_dev(v4l2_dev);
+	struct i2c_adapter *adapter = &radio->i2c_adapter;
+
+	i2c_del_adapter(adapter);
+	v4l2_device_unregister(&radio->v4l2_dev);
+	kfree(radio->buffer);
+	kfree(radio);
+}
+
+/*
+ * This command sequence emulates the behaviour of the Windows driver.
+ * The structure of these commands was determined by sniffing the
+ * usb traffic of the device during startup.
+ * Most likely, these commands make some queries to the device.
+ * Commands are sent to enquire parameters like the bus mode,
+ * component revision, boot mode, the device serial number etc.
+ *
+ * These commands are necessary to be sent in this order during startup.
+ * The device fails to powerup if these commands are not sent.
+ *
+ * The complete list of startup commands is given in the start_seq table below.
+ */
+static int si4713_send_startup_command(struct si4713_usb_device *radio)
+{
+	unsigned long until_jiffies = jiffies + usecs_to_jiffies(USB_RESP_TIMEOUT) + 1;
+	u8 *buffer = radio->buffer;
+	int retval;
+
+	/* send the command */
+	retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+					0x09, 0x21, 0x033f, 0, radio->buffer,
+					BUFFER_LENGTH, USB_TIMEOUT);
+	if (retval < 0)
+		return retval;
+
+	for (;;) {
+		/* receive the response */
+		retval = usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+				0x01, 0xa1, 0x033f, 0, radio->buffer,
+				BUFFER_LENGTH, USB_TIMEOUT);
+		if (retval < 0)
+			return retval;
+		if (!radio->buffer[1]) {
+			/* USB traffic sniffing showed that some commands require
+			 * additional checks. */
+			switch (buffer[1]) {
+			case 0x32:
+				if (radio->buffer[2] == 0)
+					return 0;
+				break;
+			case 0x14:
+			case 0x12:
+				if (radio->buffer[2] & SI4713_CTS)
+					return 0;
+				break;
+			case 0x06:
+				if ((radio->buffer[2] & SI4713_CTS) && radio->buffer[9] == 0x08)
+					return 0;
+				break;
+			default:
+				return 0;
+			}
+		}
+		if (time_is_before_jiffies(until_jiffies))
+			return -EIO;
+		msleep(3);
+	}
+
+	return retval;
+}
+
+struct si4713_start_seq_table {
+	int len;
+	u8 payload[8];
+};
+
+/*
+ * Some of the startup commands that could be recognized are :
+ * (0x03): Get serial number of the board (Response : CB000-00-00)
+ * (0x06, 0x03, 0x03, 0x08, 0x01, 0x0f) : Get Component revision
+ */
+static const struct si4713_start_seq_table start_seq[] = {
+
+	{ 1, { 0x03 } },
+	{ 2, { 0x32, 0x7f } },
+	{ 6, { 0x06, 0x03, 0x03, 0x08, 0x01, 0x0f } },
+	{ 2, { 0x14, 0x02 } },
+	{ 2, { 0x09, 0x90 } },
+	{ 3, { 0x08, 0x90, 0xfa } },
+	{ 2, { 0x36, 0x01 } },
+	{ 2, { 0x05, 0x03 } },
+	{ 7, { 0x06, 0x00, 0x06, 0x0e, 0x01, 0x0f, 0x05 } },
+	{ 1, { 0x12 } },
+	/* Commands that are sent after pressing the 'Initialize'
+		button in the windows application */
+	{ 1, { 0x03 } },
+	{ 1, { 0x01 } },
+	{ 2, { 0x09, 0x90 } },
+	{ 3, { 0x08, 0x90, 0xfa } },
+	{ 1, { 0x34 } },
+	{ 2, { 0x35, 0x01 } },
+	{ 2, { 0x36, 0x01 } },
+	{ 2, { 0x30, 0x09 } },
+	{ 4, { 0x30, 0x06, 0x00, 0xe2 } },
+	{ 3, { 0x31, 0x01, 0x30 } },
+	{ 3, { 0x31, 0x04, 0x09 } },
+	{ 2, { 0x05, 0x02 } },
+	{ 6, { 0x06, 0x03, 0x03, 0x08, 0x01, 0x0f } },
+};
+
+static int si4713_start_seq(struct si4713_usb_device *radio)
+{
+	int retval = 0;
+	int i;
+
+	radio->buffer[0] = 0x3f;
+
+	for (i = 0; i < ARRAY_SIZE(start_seq); i++) {
+		int len = start_seq[i].len;
+		const u8 *payload = start_seq[i].payload;
+
+		memcpy(radio->buffer + 1, payload, len);
+		memset(radio->buffer + len + 1, 0, BUFFER_LENGTH - 1 - len);
+		retval = si4713_send_startup_command(radio);
+	}
+
+	return retval;
+}
+
+static struct i2c_board_info si4713_board_info = {
+	I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
+};
+
+struct si4713_command_table {
+	int command_id;
+	u8 payload[8];
+};
+
+/*
+ * Structure of a command :
+ *	Byte 1 : 0x3f (always)
+ *	Byte 2 : 0x06 (send a command)
+ *	Byte 3 : Unknown
+ *	Byte 4 : Number of arguments + 1 (for the command byte)
+ *	Byte 5 : Number of response bytes
+ */
+static struct si4713_command_table command_table[] = {
+
+	{ SI4713_CMD_POWER_UP,		{ 0x00, SI4713_PWUP_NARGS + 1, SI4713_PWUP_NRESP} },
+	{ SI4713_CMD_GET_REV,		{ 0x03, 0x01, SI4713_GETREV_NRESP } },
+	{ SI4713_CMD_POWER_DOWN,	{ 0x00, 0x01, SI4713_PWDN_NRESP} },
+	{ SI4713_CMD_SET_PROPERTY,	{ 0x00, SI4713_SET_PROP_NARGS + 1, SI4713_SET_PROP_NRESP } },
+	{ SI4713_CMD_GET_PROPERTY,	{ 0x00, SI4713_GET_PROP_NARGS + 1, SI4713_GET_PROP_NRESP } },
+	{ SI4713_CMD_TX_TUNE_FREQ,	{ 0x03, SI4713_TXFREQ_NARGS + 1, SI4713_TXFREQ_NRESP } },
+	{ SI4713_CMD_TX_TUNE_POWER,	{ 0x03, SI4713_TXPWR_NARGS + 1, SI4713_TXPWR_NRESP } },
+	{ SI4713_CMD_TX_TUNE_MEASURE,	{ 0x03, SI4713_TXMEA_NARGS + 1, SI4713_TXMEA_NRESP } },
+	{ SI4713_CMD_TX_TUNE_STATUS,	{ 0x00, SI4713_TXSTATUS_NARGS + 1, SI4713_TXSTATUS_NRESP } },
+	{ SI4713_CMD_TX_ASQ_STATUS,	{ 0x03, SI4713_ASQSTATUS_NARGS + 1, SI4713_ASQSTATUS_NRESP } },
+	{ SI4713_CMD_GET_INT_STATUS,	{ 0x03, 0x01, SI4713_GET_STATUS_NRESP } },
+	{ SI4713_CMD_TX_RDS_BUFF,	{ 0x03, SI4713_RDSBUFF_NARGS + 1, SI4713_RDSBUFF_NRESP } },
+	{ SI4713_CMD_TX_RDS_PS,		{ 0x00, SI4713_RDSPS_NARGS + 1, SI4713_RDSPS_NRESP } },
+};
+
+static int send_command(struct si4713_usb_device *radio, u8 *payload, char *data, int len)
+{
+	int retval;
+
+	radio->buffer[0] = 0x3f;
+	radio->buffer[1] = 0x06;
+
+	memcpy(radio->buffer + 2, payload, 3);
+	memcpy(radio->buffer + 5, data, len);
+	memset(radio->buffer + 5 + len, 0, BUFFER_LENGTH - 5 - len);
+
+	/* send the command */
+	retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+					0x09, 0x21, 0x033f, 0, radio->buffer,
+					BUFFER_LENGTH, USB_TIMEOUT);
+
+	return retval < 0 ? retval : 0;
+}
+
+static int si4713_i2c_read(struct si4713_usb_device *radio, char *data, int len)
+{
+	unsigned long until_jiffies = jiffies + usecs_to_jiffies(USB_RESP_TIMEOUT) + 1;
+	int retval;
+
+	/* receive the response */
+	for (;;) {
+		retval = usb_control_msg(radio->usbdev,
+					usb_rcvctrlpipe(radio->usbdev, 0),
+					0x01, 0xa1, 0x033f, 0, radio->buffer,
+					BUFFER_LENGTH, USB_TIMEOUT);
+		if (retval < 0)
+			return retval;
+
+		/*
+		 * Check that we get a valid reply back (buffer[1] == 0) and
+		 * that CTS is set before returning, otherwise we wait and try
+		 * again. The i2c driver also does the CTS check, but the timeouts
+		 * used there are much too small for this USB driver, so we wait
+		 * for it here.
+		 */
+		if (radio->buffer[1] == 0 && (radio->buffer[2] & SI4713_CTS)) {
+			memcpy(data, radio->buffer + 2, len);
+			return 0;
+		}
+		if (time_is_before_jiffies(until_jiffies)) {
+			/* Zero the status value, ensuring CTS isn't set */
+			data[0] = 0;
+			return 0;
+		}
+		msleep(3);
+	}
+}
+
+static int si4713_i2c_write(struct si4713_usb_device *radio, char *data, int len)
+{
+	int retval = -EINVAL;
+	int i;
+
+	if (len > BUFFER_LENGTH - 5)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(command_table); i++) {
+		if (data[0] == command_table[i].command_id)
+			retval = send_command(radio, command_table[i].payload,
+						data, len);
+	}
+
+	return retval < 0 ? retval : 0;
+}
+
+static int si4713_transfer(struct i2c_adapter *i2c_adapter,
+				struct i2c_msg *msgs, int num)
+{
+	struct si4713_usb_device *radio = i2c_get_adapdata(i2c_adapter);
+	int retval = -EINVAL;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		if (msgs[i].flags & I2C_M_RD)
+			retval = si4713_i2c_read(radio, msgs[i].buf, msgs[i].len);
+		else
+			retval = si4713_i2c_write(radio, msgs[i].buf, msgs[i].len);
+		if (retval)
+			break;
+	}
+
+	return retval ? retval : num;
+}
+
+static u32 si4713_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm si4713_algo = {
+	.master_xfer   = si4713_transfer,
+	.functionality = si4713_functionality,
+};
+
+/* This name value shows up in the sysfs filename associated
+		with this I2C adapter */
+static const struct i2c_adapter si4713_i2c_adapter_template = {
+	.name   = "si4713-i2c",
+	.owner  = THIS_MODULE,
+	.algo   = &si4713_algo,
+};
+
+static int si4713_register_i2c_adapter(struct si4713_usb_device *radio)
+{
+	radio->i2c_adapter = si4713_i2c_adapter_template;
+	/* set up sysfs linkage to our parent device */
+	radio->i2c_adapter.dev.parent = &radio->usbdev->dev;
+	i2c_set_adapdata(&radio->i2c_adapter, radio);
+
+	return i2c_add_adapter(&radio->i2c_adapter);
+}
+
+/* check if the device is present and register with v4l and usb if it is */
+static int usb_si4713_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct si4713_usb_device *radio;
+	struct i2c_adapter *adapter;
+	struct v4l2_subdev *sd;
+	int retval;
+
+	dev_info(&intf->dev, "Si4713 development board discovered: (%04X:%04X)\n",
+			id->idVendor, id->idProduct);
+
+	/* Initialize local device structure */
+	radio = kzalloc_obj(struct si4713_usb_device);
+	if (radio)
+		radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
+
+	if (!radio || !radio->buffer) {
+		dev_err(&intf->dev, "kmalloc for si4713_usb_device failed\n");
+		kfree(radio);
+		return -ENOMEM;
+	}
+
+	mutex_init(&radio->lock);
+
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->intf = intf;
+	usb_set_intfdata(intf, &radio->v4l2_dev);
+
+	retval = si4713_start_seq(radio);
+	if (retval < 0)
+		goto err_v4l2;
+
+	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&intf->dev, "couldn't register v4l2_device\n");
+		goto err_v4l2;
+	}
+
+	retval = si4713_register_i2c_adapter(radio);
+	if (retval < 0) {
+		dev_err(&intf->dev, "could not register i2c device\n");
+		goto err_i2cdev;
+	}
+
+	adapter = &radio->i2c_adapter;
+	sd = v4l2_i2c_new_subdev_board(&radio->v4l2_dev, adapter,
+					  &si4713_board_info, NULL);
+	radio->v4l2_subdev = sd;
+	if (!sd) {
+		dev_err(&intf->dev, "cannot get v4l2 subdevice\n");
+		retval = -ENODEV;
+		goto del_adapter;
+	}
+
+	radio->vdev.ctrl_handler = sd->ctrl_handler;
+	radio->v4l2_dev.release = usb_si4713_video_device_release;
+	strscpy(radio->vdev.name, radio->v4l2_dev.name,
+		sizeof(radio->vdev.name));
+	radio->vdev.v4l2_dev = &radio->v4l2_dev;
+	radio->vdev.fops = &usb_si4713_fops;
+	radio->vdev.ioctl_ops = &usb_si4713_ioctl_ops;
+	radio->vdev.lock = &radio->lock;
+	radio->vdev.release = video_device_release_empty;
+	radio->vdev.vfl_dir = VFL_DIR_TX;
+	radio->vdev.device_caps = V4L2_CAP_MODULATOR | V4L2_CAP_RDS_OUTPUT;
+
+	video_set_drvdata(&radio->vdev, radio);
+
+	retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1);
+	if (retval < 0) {
+		dev_err(&intf->dev, "could not register video device\n");
+		goto del_adapter;
+	}
+
+	dev_info(&intf->dev, "V4L2 device registered as %s\n",
+			video_device_node_name(&radio->vdev));
+
+	return 0;
+
+del_adapter:
+	i2c_del_adapter(adapter);
+err_i2cdev:
+	v4l2_device_unregister(&radio->v4l2_dev);
+err_v4l2:
+	kfree(radio->buffer);
+	kfree(radio);
+	return retval;
+}
+
+static void usb_si4713_disconnect(struct usb_interface *intf)
+{
+	struct si4713_usb_device *radio = to_si4713_dev(usb_get_intfdata(intf));
+
+	dev_info(&intf->dev, "Si4713 development board now disconnected\n");
+
+	mutex_lock(&radio->lock);
+	usb_set_intfdata(intf, NULL);
+	video_unregister_device(&radio->vdev);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	mutex_unlock(&radio->lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+/* USB subsystem interface */
+static struct usb_driver usb_si4713_driver = {
+	.name			= "radio-usb-si4713",
+	.probe			= usb_si4713_probe,
+	.disconnect		= usb_si4713_disconnect,
+	.id_table		= usb_si4713_usb_device_table,
+};
+
+module_usb_driver(usb_si4713_driver);
diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c
new file mode 100644
index 000000000..0c0354566
--- /dev/null
+++ b/drivers/media/radio/si4713/si4713.c
@@ -0,0 +1,1665 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/media/radio/si4713-i2c.c
+ *
+ * Silicon Labs Si4713 FM Radio Transmitter I2C commands.
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-common.h>
+
+#include "si4713.h"
+
+/* module parameters */
+static int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level (0 - 2)");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>");
+MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
+MODULE_VERSION("0.0.1");
+
+#define DEFAULT_RDS_PI			0x00
+#define DEFAULT_RDS_PTY			0x00
+#define DEFAULT_RDS_DEVIATION		0x00C8
+#define DEFAULT_RDS_PS_REPEAT_COUNT	0x0003
+#define DEFAULT_LIMITER_RTIME		0x1392
+#define DEFAULT_LIMITER_DEV		0x102CA
+#define DEFAULT_PILOT_FREQUENCY		0x4A38
+#define DEFAULT_PILOT_DEVIATION		0x1A5E
+#define DEFAULT_ACOMP_ATIME		0x0000
+#define DEFAULT_ACOMP_RTIME		0xF4240L
+#define DEFAULT_ACOMP_GAIN		0x0F
+#define DEFAULT_ACOMP_THRESHOLD		(-0x28)
+#define DEFAULT_MUTE			0x01
+#define DEFAULT_POWER_LEVEL		88
+#define DEFAULT_FREQUENCY		8800
+#define DEFAULT_PREEMPHASIS		FMPE_EU
+#define DEFAULT_TUNE_RNL		0xFF
+
+#define to_si4713_device(sd)	container_of(sd, struct si4713_device, sd)
+
+/* frequency domain transformation (using times 10 to avoid floats) */
+#define FREQDEV_UNIT	100000
+#define FREQV4L2_MULTI	625
+#define si4713_to_v4l2(f)	((f * FREQDEV_UNIT) / FREQV4L2_MULTI)
+#define v4l2_to_si4713(f)	((f * FREQV4L2_MULTI) / FREQDEV_UNIT)
+#define FREQ_RANGE_LOW			7600
+#define FREQ_RANGE_HIGH			10800
+
+#define MAX_ARGS 7
+
+#define RDS_BLOCK			8
+#define RDS_BLOCK_CLEAR			0x03
+#define RDS_BLOCK_LOAD			0x04
+#define RDS_RADIOTEXT_2A		0x20
+#define RDS_RADIOTEXT_BLK_SIZE		4
+#define RDS_RADIOTEXT_INDEX_MAX		0x0F
+#define RDS_CARRIAGE_RETURN		0x0D
+
+#define rds_ps_nblocks(len)	((len / RDS_BLOCK) + (len % RDS_BLOCK ? 1 : 0))
+
+#define get_status_bit(p, b, m)	(((p) & (m)) >> (b))
+#define set_bits(p, v, b, m)	(((p) & ~(m)) | ((v) << (b)))
+
+#define ATTACK_TIME_UNIT	500
+
+#define POWER_OFF			0x00
+#define POWER_ON			0x01
+
+#define msb(x)                  ((u8)((u16) x >> 8))
+#define lsb(x)                  ((u8)((u16) x &  0x00FF))
+#define compose_u16(msb, lsb)	(((u16)msb << 8) | lsb)
+#define check_command_failed(status)	(!(status & SI4713_CTS) || \
+					(status & SI4713_ERR))
+/* mute definition */
+#define set_mute(p)	(((p) & 1) | (((p) & 1) << 1))
+
+#ifdef DEBUG
+#define DBG_BUFFER(device, message, buffer, size)			\
+	{								\
+		int i;							\
+		char str[(size)*5];					\
+		for (i = 0; i < size; i++)				\
+			sprintf(str + i * 5, " 0x%02x", buffer[i]);	\
+		v4l2_dbg(2, debug, device, "%s:%s\n", message, str);	\
+	}
+#else
+#define DBG_BUFFER(device, message, buffer, size)
+#endif
+
+/*
+ * Values for limiter release time (sorted by second column)
+ *	device	release
+ *	value	time (us)
+ */
+static long limiter_times[] = {
+	2000,	250,
+	1000,	500,
+	510,	1000,
+	255,	2000,
+	170,	3000,
+	127,	4020,
+	102,	5010,
+	85,	6020,
+	73,	7010,
+	64,	7990,
+	57,	8970,
+	51,	10030,
+	25,	20470,
+	17,	30110,
+	13,	39380,
+	10,	51190,
+	8,	63690,
+	7,	73140,
+	6,	85330,
+	5,	102390,
+};
+
+/*
+ * Values for audio compression release time (sorted by second column)
+ *	device	release
+ *	value	time (us)
+ */
+static unsigned long acomp_rtimes[] = {
+	0,	100000,
+	1,	200000,
+	2,	350000,
+	3,	525000,
+	4,	1000000,
+};
+
+/*
+ * Values for preemphasis (sorted by second column)
+ *	device	preemphasis
+ *	value	value (v4l2)
+ */
+static unsigned long preemphasis_values[] = {
+	FMPE_DISABLED,	V4L2_PREEMPHASIS_DISABLED,
+	FMPE_EU,	V4L2_PREEMPHASIS_50_uS,
+	FMPE_USA,	V4L2_PREEMPHASIS_75_uS,
+};
+
+static int usecs_to_dev(unsigned long usecs, unsigned long const array[],
+			int size)
+{
+	int i;
+	int rval = -EINVAL;
+
+	for (i = 0; i < size / 2; i++)
+		if (array[(i * 2) + 1] >= usecs) {
+			rval = array[i * 2];
+			break;
+		}
+
+	return rval;
+}
+
+/* si4713_handler: IRQ handler, just complete work */
+static irqreturn_t si4713_handler(int irq, void *dev)
+{
+	struct si4713_device *sdev = dev;
+
+	v4l2_dbg(2, debug, &sdev->sd,
+			"%s: sending signal to completion work.\n", __func__);
+	complete(&sdev->work);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * si4713_send_command - sends a command to si4713 and waits its response
+ * @sdev: si4713_device structure for the device we are communicating
+ * @command: command id
+ * @args: command arguments we are sending (up to 7)
+ * @argn: actual size of @args
+ * @response: buffer to place the expected response from the device (up to 15)
+ * @respn: actual size of @response
+ * @usecs: amount of time to wait before reading the response (in usecs)
+ */
+static int si4713_send_command(struct si4713_device *sdev, const u8 command,
+				const u8 args[], const int argn,
+				u8 response[], const int respn, const int usecs)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+	unsigned long until_jiffies;
+	u8 data1[MAX_ARGS + 1];
+	int err;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	/* First send the command and its arguments */
+	data1[0] = command;
+	memcpy(data1 + 1, args, argn);
+	DBG_BUFFER(&sdev->sd, "Parameters", data1, argn + 1);
+
+	err = i2c_master_send(client, data1, argn + 1);
+	if (err != argn + 1) {
+		v4l2_err(&sdev->sd, "Error while sending command 0x%02x\n",
+			command);
+		return err < 0 ? err : -EIO;
+	}
+
+	until_jiffies = jiffies + usecs_to_jiffies(usecs) + 1;
+
+	/* Wait response from interrupt */
+	if (client->irq) {
+		if (!wait_for_completion_timeout(&sdev->work,
+				usecs_to_jiffies(usecs) + 1))
+			v4l2_warn(&sdev->sd,
+				"(%s) Device took too much time to answer.\n",
+				__func__);
+	}
+
+	do {
+		err = i2c_master_recv(client, response, respn);
+		if (err != respn) {
+			v4l2_err(&sdev->sd,
+				"Error %d while reading response for command 0x%02x\n",
+				err, command);
+			return err < 0 ? err : -EIO;
+		}
+
+		DBG_BUFFER(&sdev->sd, "Response", response, respn);
+		if (!check_command_failed(response[0]))
+			return 0;
+
+		if (client->irq)
+			return -EBUSY;
+		if (usecs <= 1000)
+			usleep_range(usecs, 1000);
+		else
+			usleep_range(1000, 2000);
+	} while (time_is_after_jiffies(until_jiffies));
+
+	return -EBUSY;
+}
+
+/*
+ * si4713_read_property - reads a si4713 property
+ * @sdev: si4713_device structure for the device we are communicating
+ * @prop: property identification number
+ * @pv: property value to be returned on success
+ */
+static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv)
+{
+	int err;
+	u8 val[SI4713_GET_PROP_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = property's MSB
+	 *	.Third byte = property's LSB
+	 */
+	const u8 args[SI4713_GET_PROP_NARGS] = {
+		0x00,
+		msb(prop),
+		lsb(prop),
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_GET_PROPERTY,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	*pv = compose_u16(val[2], val[3]);
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: property=0x%02x value=0x%02x status=0x%02x\n",
+			__func__, prop, *pv, val[0]);
+
+	return err;
+}
+
+/*
+ * si4713_write_property - modifies a si4713 property
+ * @sdev: si4713_device structure for the device we are communicating
+ * @prop: property identification number
+ * @val: new value for that property
+ */
+static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val)
+{
+	int rval;
+	u8 resp[SI4713_SET_PROP_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = property's MSB
+	 *	.Third byte = property's LSB
+	 *	.Fourth byte = value's MSB
+	 *	.Fifth byte = value's LSB
+	 */
+	const u8 args[SI4713_SET_PROP_NARGS] = {
+		0x00,
+		msb(prop),
+		lsb(prop),
+		msb(val),
+		lsb(val),
+	};
+
+	rval = si4713_send_command(sdev, SI4713_CMD_SET_PROPERTY,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					DEFAULT_TIMEOUT);
+
+	if (rval < 0)
+		return rval;
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: property=0x%02x value=0x%02x status=0x%02x\n",
+			__func__, prop, val, resp[0]);
+
+	/*
+	 * As there is no command response for SET_PROPERTY,
+	 * wait Tcomp time to finish before proceed, in order
+	 * to have property properly set.
+	 */
+	msleep(TIMEOUT_SET_PROPERTY);
+
+	return rval;
+}
+
+/*
+ * si4713_powerup - Powers the device up
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_powerup(struct si4713_device *sdev)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+	int err;
+	u8 resp[SI4713_PWUP_NRESP];
+	/*
+	 *	.First byte = Enabled interrupts and boot function
+	 *	.Second byte = Input operation mode
+	 */
+	u8 args[SI4713_PWUP_NARGS] = {
+		SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
+		SI4713_PWUP_OPMOD_ANALOG,
+	};
+
+	if (sdev->power_state)
+		return 0;
+
+	if (sdev->vdd) {
+		err = regulator_enable(sdev->vdd);
+		if (err) {
+			v4l2_err(&sdev->sd, "Failed to enable vdd: %d\n", err);
+			return err;
+		}
+	}
+
+	if (sdev->vio) {
+		err = regulator_enable(sdev->vio);
+		if (err) {
+			v4l2_err(&sdev->sd, "Failed to enable vio: %d\n", err);
+			return err;
+		}
+	}
+
+	if (sdev->gpio_reset) {
+		udelay(50);
+		gpiod_set_value(sdev->gpio_reset, 1);
+	}
+
+	if (client->irq)
+		args[0] |= SI4713_PWUP_CTSIEN;
+
+	err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					TIMEOUT_POWER_UP);
+
+	if (!err) {
+		v4l2_dbg(1, debug, &sdev->sd, "Powerup response: 0x%02x\n",
+				resp[0]);
+		v4l2_dbg(1, debug, &sdev->sd, "Device in power up mode\n");
+		sdev->power_state = POWER_ON;
+
+		if (client->irq)
+			err = si4713_write_property(sdev, SI4713_GPO_IEN,
+						SI4713_STC_INT | SI4713_CTS);
+		return err;
+	}
+	gpiod_set_value(sdev->gpio_reset, 0);
+
+
+	if (sdev->vdd) {
+		err = regulator_disable(sdev->vdd);
+		if (err)
+			v4l2_err(&sdev->sd, "Failed to disable vdd: %d\n", err);
+	}
+
+	if (sdev->vio) {
+		err = regulator_disable(sdev->vio);
+		if (err)
+			v4l2_err(&sdev->sd, "Failed to disable vio: %d\n", err);
+	}
+
+	return err;
+}
+
+/*
+ * si4713_powerdown - Powers the device down
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_powerdown(struct si4713_device *sdev)
+{
+	int err;
+	u8 resp[SI4713_PWDN_NRESP];
+
+	if (!sdev->power_state)
+		return 0;
+
+	err = si4713_send_command(sdev, SI4713_CMD_POWER_DOWN,
+					NULL, 0,
+					resp, ARRAY_SIZE(resp),
+					DEFAULT_TIMEOUT);
+
+	if (!err) {
+		v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
+				resp[0]);
+		v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
+		if (sdev->gpio_reset)
+			gpiod_set_value(sdev->gpio_reset, 0);
+
+		if (sdev->vdd) {
+			err = regulator_disable(sdev->vdd);
+			if (err) {
+				v4l2_err(&sdev->sd,
+					"Failed to disable vdd: %d\n", err);
+			}
+		}
+
+		if (sdev->vio) {
+			err = regulator_disable(sdev->vio);
+			if (err) {
+				v4l2_err(&sdev->sd,
+					"Failed to disable vio: %d\n", err);
+			}
+		}
+		sdev->power_state = POWER_OFF;
+	}
+
+	return err;
+}
+
+/*
+ * si4713_checkrev - Checks if we are treating a device with the correct rev.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_checkrev(struct si4713_device *sdev)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+	int rval;
+	u8 resp[SI4713_GETREV_NRESP];
+
+	rval = si4713_send_command(sdev, SI4713_CMD_GET_REV,
+					NULL, 0,
+					resp, ARRAY_SIZE(resp),
+					DEFAULT_TIMEOUT);
+
+	if (rval < 0)
+		return rval;
+
+	if (resp[1] == SI4713_PRODUCT_NUMBER) {
+		v4l2_info(&sdev->sd, "chip found @ 0x%02x (%s)\n",
+				client->addr << 1, client->adapter->name);
+	} else {
+		v4l2_err(&sdev->sd, "Invalid product number 0x%X\n", resp[1]);
+		rval = -EINVAL;
+	}
+	return rval;
+}
+
+/*
+ * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful
+ *		     for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
+ * @sdev: si4713_device structure for the device we are communicating
+ * @usecs: timeout to wait for STC interrupt signal
+ */
+static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+	u8 resp[SI4713_GET_STATUS_NRESP];
+	unsigned long start_jiffies = jiffies;
+	int err;
+
+	if (client->irq &&
+	    !wait_for_completion_timeout(&sdev->work, usecs_to_jiffies(usecs) + 1))
+		v4l2_warn(&sdev->sd,
+			"(%s) Device took too much time to answer.\n", __func__);
+
+	for (;;) {
+		/* Clear status bits */
+		err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS,
+				NULL, 0,
+				resp, ARRAY_SIZE(resp),
+				DEFAULT_TIMEOUT);
+		/* The USB device returns errors when it waits for the
+		 * STC bit to be set. Hence polling */
+		if (err >= 0) {
+			v4l2_dbg(1, debug, &sdev->sd,
+				"%s: status bits: 0x%02x\n", __func__, resp[0]);
+
+			if (resp[0] & SI4713_STC_INT)
+				return 0;
+		}
+		if (jiffies_to_usecs(jiffies - start_jiffies) > usecs)
+			return err < 0 ? err : -EIO;
+		/* We sleep here for 3-4 ms in order to avoid flooding the device
+		 * with USB requests. The si4713 USB driver was developed
+		 * by reverse engineering the Windows USB driver. The windows
+		 * driver also has a ~2.5 ms delay between responses. */
+		usleep_range(3000, 4000);
+	}
+}
+
+/*
+ * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
+ *			frequency between 76 and 108 MHz in 10 kHz units and
+ *			steps of 50 kHz.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
+ */
+static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
+{
+	int err;
+	u8 val[SI4713_TXFREQ_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = frequency's MSB
+	 *	.Third byte = frequency's LSB
+	 */
+	const u8 args[SI4713_TXFREQ_NARGS] = {
+		0x00,
+		msb(frequency),
+		lsb(frequency),
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_FREQ,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: frequency=0x%02x status=0x%02x\n", __func__,
+			frequency, val[0]);
+
+	err = si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
+	if (err < 0)
+		return err;
+
+	return compose_u16(args[1], args[2]);
+}
+
+/*
+ * si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in
+ *			1 dB units. A value of 0x00 indicates off. The command
+ *			also sets the antenna tuning capacitance. A value of 0
+ *			indicates autotuning, and a value of 1 - 191 indicates
+ *			a manual override, which results in a tuning
+ *			capacitance of 0.25 pF x @antcap.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @power: tuning power (88 - 120 dBuV, unit/step 1 dB)
+ * @antcap: value of antenna tuning capacitor (0 - 191)
+ */
+static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
+				u8 antcap)
+{
+	int err;
+	u8 val[SI4713_TXPWR_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = 0
+	 *	.Third byte = power
+	 *	.Fourth byte = antcap
+	 */
+	u8 args[SI4713_TXPWR_NARGS] = {
+		0x00,
+		0x00,
+		power,
+		antcap,
+	};
+
+	/* Map power values 1-87 to MIN_POWER (88) */
+	if (power > 0 && power < SI4713_MIN_POWER)
+		args[2] = power = SI4713_MIN_POWER;
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: power=0x%02x antcap=0x%02x status=0x%02x\n",
+			__func__, power, antcap, val[0]);
+
+	return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER);
+}
+
+/*
+ * si4713_tx_tune_measure - Enters receive mode and measures the received noise
+ *			level in units of dBuV on the selected frequency.
+ *			The Frequency must be between 76 and 108 MHz in 10 kHz
+ *			units and steps of 50 kHz. The command also sets the
+ *			antenna	tuning capacitance. A value of 0 means
+ *			autotuning, and a value of 1 to 191 indicates manual
+ *			override.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
+ * @antcap: value of antenna tuning capacitor (0 - 191)
+ */
+static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
+					u8 antcap)
+{
+	int err;
+	u8 val[SI4713_TXMEA_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = frequency's MSB
+	 *	.Third byte = frequency's LSB
+	 *	.Fourth byte = antcap
+	 */
+	const u8 args[SI4713_TXMEA_NARGS] = {
+		0x00,
+		msb(frequency),
+		lsb(frequency),
+		antcap,
+	};
+
+	sdev->tune_rnl = DEFAULT_TUNE_RNL;
+
+	if (antcap > SI4713_MAX_ANTCAP)
+		return -EDOM;
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_MEASURE,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: frequency=0x%02x antcap=0x%02x status=0x%02x\n",
+			__func__, frequency, antcap, val[0]);
+
+	return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
+}
+
+/*
+ * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
+ *			tx_tune_power commands. This command return the current
+ *			frequency, output voltage in dBuV, the antenna tunning
+ *			capacitance value and the received noise level. The
+ *			command also clears the stcint interrupt bit when the
+ *			first bit of its arguments is high.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
+ * @frequency: returned frequency
+ * @power: returned power
+ * @antcap: returned antenna capacitance
+ * @noise: returned noise level
+ */
+static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
+					u16 *frequency,	u8 *power,
+					u8 *antcap, u8 *noise)
+{
+	int err;
+	u8 val[SI4713_TXSTATUS_NRESP];
+	/*
+	 *	.First byte = intack bit
+	 */
+	const u8 args[SI4713_TXSTATUS_NARGS] = {
+		intack & SI4713_INTACK_MASK,
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_STATUS,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (!err) {
+		v4l2_dbg(1, debug, &sdev->sd,
+			"%s: status=0x%02x\n", __func__, val[0]);
+		*frequency = compose_u16(val[2], val[3]);
+		sdev->frequency = *frequency;
+		*power = val[5];
+		*antcap = val[6];
+		*noise = val[7];
+		v4l2_dbg(1, debug, &sdev->sd,
+			 "%s: response: %d x 10 kHz (power %d, antcap %d, rnl %d)\n",
+			 __func__, *frequency, *power, *antcap, *noise);
+	}
+
+	return err;
+}
+
+/*
+ * si4713_tx_rds_buff - Loads the RDS group buffer FIFO or circular buffer.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @mode: the buffer operation mode.
+ * @rdsb: RDS Block B
+ * @rdsc: RDS Block C
+ * @rdsd: RDS Block D
+ * @cbleft: returns the number of available circular buffer blocks minus the
+ *          number of used circular buffer blocks.
+ */
+static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb,
+				u16 rdsc, u16 rdsd, s8 *cbleft)
+{
+	int err;
+	u8 val[SI4713_RDSBUFF_NRESP];
+
+	const u8 args[SI4713_RDSBUFF_NARGS] = {
+		mode & SI4713_RDSBUFF_MODE_MASK,
+		msb(rdsb),
+		lsb(rdsb),
+		msb(rdsc),
+		lsb(rdsc),
+		msb(rdsd),
+		lsb(rdsd),
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_BUFF,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (!err) {
+		v4l2_dbg(1, debug, &sdev->sd,
+			"%s: status=0x%02x\n", __func__, val[0]);
+		*cbleft = (s8)val[2] - val[3];
+		v4l2_dbg(1, debug, &sdev->sd,
+			 "%s: response: interrupts 0x%02x cb avail: %d cb used %d fifo avail %d fifo used %d\n",
+			 __func__, val[1], val[2], val[3], val[4], val[5]);
+	}
+
+	return err;
+}
+
+/*
+ * si4713_tx_rds_ps - Loads the program service buffer.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @psid: program service id to be loaded.
+ * @pschar: assumed 4 size char array to be loaded into the program service
+ */
+static int si4713_tx_rds_ps(struct si4713_device *sdev, u8 psid,
+				unsigned char *pschar)
+{
+	int err;
+	u8 val[SI4713_RDSPS_NRESP];
+
+	const u8 args[SI4713_RDSPS_NARGS] = {
+		psid & SI4713_RDSPS_PSID_MASK,
+		pschar[0],
+		pschar[1],
+		pschar[2],
+		pschar[3],
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_PS,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	v4l2_dbg(1, debug, &sdev->sd, "%s: status=0x%02x\n", __func__, val[0]);
+
+	return err;
+}
+
+static int si4713_set_power_state(struct si4713_device *sdev, u8 value)
+{
+	if (value)
+		return si4713_powerup(sdev);
+	return si4713_powerdown(sdev);
+}
+
+static int si4713_set_mute(struct si4713_device *sdev, u16 mute)
+{
+	int rval = 0;
+
+	mute = set_mute(mute);
+
+	if (sdev->power_state)
+		rval = si4713_write_property(sdev,
+				SI4713_TX_LINE_INPUT_MUTE, mute);
+
+	return rval;
+}
+
+static int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name)
+{
+	int rval = 0, i;
+	u8 len = 0;
+
+	/* We want to clear the whole thing */
+	if (!strlen(ps_name))
+		memset(ps_name, 0, MAX_RDS_PS_NAME + 1);
+
+	if (sdev->power_state) {
+		/* Write the new ps name and clear the padding */
+		for (i = 0; i < MAX_RDS_PS_NAME; i += (RDS_BLOCK / 2)) {
+			rval = si4713_tx_rds_ps(sdev, (i / (RDS_BLOCK / 2)),
+						ps_name + i);
+			if (rval < 0)
+				return rval;
+		}
+
+		/* Setup the size to be sent */
+		if (strlen(ps_name))
+			len = strlen(ps_name) - 1;
+		else
+			len = 1;
+
+		rval = si4713_write_property(sdev,
+				SI4713_TX_RDS_PS_MESSAGE_COUNT,
+				rds_ps_nblocks(len));
+		if (rval < 0)
+			return rval;
+
+		rval = si4713_write_property(sdev,
+				SI4713_TX_RDS_PS_REPEAT_COUNT,
+				DEFAULT_RDS_PS_REPEAT_COUNT * 2);
+		if (rval < 0)
+			return rval;
+	}
+
+	return rval;
+}
+
+static int si4713_set_rds_radio_text(struct si4713_device *sdev, const char *rt)
+{
+	static const char cr[RDS_RADIOTEXT_BLK_SIZE] = { RDS_CARRIAGE_RETURN, 0 };
+	int rval = 0, i;
+	u16 t_index = 0;
+	u8 b_index = 0, cr_inserted = 0;
+	s8 left;
+
+	if (!sdev->power_state)
+		return rval;
+
+	rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_CLEAR, 0, 0, 0, &left);
+	if (rval < 0)
+		return rval;
+
+	if (!strlen(rt))
+		return rval;
+
+	do {
+		/* RDS spec says that if the last block isn't used,
+		 * then apply a carriage return
+		 */
+		if (t_index < (RDS_RADIOTEXT_INDEX_MAX * RDS_RADIOTEXT_BLK_SIZE)) {
+			for (i = 0; i < RDS_RADIOTEXT_BLK_SIZE; i++) {
+				if (!rt[t_index + i] ||
+				    rt[t_index + i] == RDS_CARRIAGE_RETURN) {
+					rt = cr;
+					cr_inserted = 1;
+					break;
+				}
+			}
+		}
+
+		rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_LOAD,
+				compose_u16(RDS_RADIOTEXT_2A, b_index++),
+				compose_u16(rt[t_index], rt[t_index + 1]),
+				compose_u16(rt[t_index + 2], rt[t_index + 3]),
+				&left);
+		if (rval < 0)
+			return rval;
+
+		t_index += RDS_RADIOTEXT_BLK_SIZE;
+
+		if (cr_inserted)
+			break;
+	} while (left > 0);
+
+	return rval;
+}
+
+/*
+ * si4713_update_tune_status - update properties from tx_tune_status
+ * command. Must be called with sdev->mutex held.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_update_tune_status(struct si4713_device *sdev)
+{
+	int rval;
+	u16 f = 0;
+	u8 p = 0, a = 0, n = 0;
+
+	rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);
+
+	if (rval < 0)
+		goto exit;
+
+/*	TODO: check that power_level and antenna_capacitor really are not
+	changed by the hardware. If they are, then these controls should become
+	volatiles.
+	sdev->power_level = p;
+	sdev->antenna_capacitor = a;*/
+	sdev->tune_rnl = n;
+
+exit:
+	return rval;
+}
+
+static int si4713_choose_econtrol_action(struct si4713_device *sdev, u32 id,
+		s32 *bit, s32 *mask, u16 *property, int *mul,
+		unsigned long **table, int *size)
+{
+	s32 rval = 0;
+
+	switch (id) {
+	/* FM_TX class controls */
+	case V4L2_CID_RDS_TX_PI:
+		*property = SI4713_TX_RDS_PI;
+		*mul = 1;
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+		*property = SI4713_TX_ACOMP_THRESHOLD;
+		*mul = 1;
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+		*property = SI4713_TX_ACOMP_GAIN;
+		*mul = 1;
+		break;
+	case V4L2_CID_PILOT_TONE_FREQUENCY:
+		*property = SI4713_TX_PILOT_FREQUENCY;
+		*mul = 1;
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+		*property = SI4713_TX_ACOMP_ATTACK_TIME;
+		*mul = ATTACK_TIME_UNIT;
+		break;
+	case V4L2_CID_PILOT_TONE_DEVIATION:
+		*property = SI4713_TX_PILOT_DEVIATION;
+		*mul = 10;
+		break;
+	case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+		*property = SI4713_TX_AUDIO_DEVIATION;
+		*mul = 10;
+		break;
+	case V4L2_CID_RDS_TX_DEVIATION:
+		*property = SI4713_TX_RDS_DEVIATION;
+		*mul = 1;
+		break;
+
+	case V4L2_CID_RDS_TX_PTY:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 5;
+		*mask = 0x1F << 5;
+		break;
+	case V4L2_CID_RDS_TX_DYNAMIC_PTY:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 15;
+		*mask = 1 << 15;
+		break;
+	case V4L2_CID_RDS_TX_COMPRESSED:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 14;
+		*mask = 1 << 14;
+		break;
+	case V4L2_CID_RDS_TX_ARTIFICIAL_HEAD:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 13;
+		*mask = 1 << 13;
+		break;
+	case V4L2_CID_RDS_TX_MONO_STEREO:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 12;
+		*mask = 1 << 12;
+		break;
+	case V4L2_CID_RDS_TX_TRAFFIC_PROGRAM:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 10;
+		*mask = 1 << 10;
+		break;
+	case V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 4;
+		*mask = 1 << 4;
+		break;
+	case V4L2_CID_RDS_TX_MUSIC_SPEECH:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 3;
+		*mask = 1 << 3;
+		break;
+	case V4L2_CID_AUDIO_LIMITER_ENABLED:
+		*property = SI4713_TX_ACOMP_ENABLE;
+		*bit = 1;
+		*mask = 1 << 1;
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+		*property = SI4713_TX_ACOMP_ENABLE;
+		*bit = 0;
+		*mask = 1 << 0;
+		break;
+	case V4L2_CID_PILOT_TONE_ENABLED:
+		*property = SI4713_TX_COMPONENT_ENABLE;
+		*bit = 0;
+		*mask = 1 << 0;
+		break;
+
+	case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+		*property = SI4713_TX_LIMITER_RELEASE_TIME;
+		*table = limiter_times;
+		*size = ARRAY_SIZE(limiter_times);
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+		*property = SI4713_TX_ACOMP_RELEASE_TIME;
+		*table = acomp_rtimes;
+		*size = ARRAY_SIZE(acomp_rtimes);
+		break;
+	case V4L2_CID_TUNE_PREEMPHASIS:
+		*property = SI4713_TX_PREEMPHASIS;
+		*table = preemphasis_values;
+		*size = ARRAY_SIZE(preemphasis_values);
+		break;
+
+	default:
+		rval = -EINVAL;
+		break;
+	}
+
+	return rval;
+}
+
+static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f);
+static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *);
+/*
+ * si4713_setup - Sets the device up with current configuration.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_setup(struct si4713_device *sdev)
+{
+	struct v4l2_frequency f;
+	struct v4l2_modulator vm;
+	int rval;
+
+	/* Device procedure needs to set frequency first */
+	f.tuner = 0;
+	f.frequency = sdev->frequency ? sdev->frequency : DEFAULT_FREQUENCY;
+	f.frequency = si4713_to_v4l2(f.frequency);
+	rval = si4713_s_frequency(&sdev->sd, &f);
+
+	vm.index = 0;
+	if (sdev->stereo)
+		vm.txsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		vm.txsubchans = V4L2_TUNER_SUB_MONO;
+	if (sdev->rds_enabled)
+		vm.txsubchans |= V4L2_TUNER_SUB_RDS;
+	si4713_s_modulator(&sdev->sd, &vm);
+
+	return rval;
+}
+
+/*
+ * si4713_initialize - Sets the device up with default configuration.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_initialize(struct si4713_device *sdev)
+{
+	int rval;
+
+	rval = si4713_set_power_state(sdev, POWER_ON);
+	if (rval < 0)
+		return rval;
+
+	rval = si4713_checkrev(sdev);
+	if (rval < 0)
+		return rval;
+
+	rval = si4713_set_power_state(sdev, POWER_OFF);
+	if (rval < 0)
+		return rval;
+
+	sdev->frequency = DEFAULT_FREQUENCY;
+	sdev->stereo = 1;
+	sdev->tune_rnl = DEFAULT_TUNE_RNL;
+	return 0;
+}
+
+/* si4713_s_ctrl - set the value of a control */
+static int si4713_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct si4713_device *sdev =
+		container_of(ctrl->handler, struct si4713_device, ctrl_handler);
+	u32 val = 0;
+	s32 bit = 0, mask = 0;
+	u16 property = 0;
+	int mul = 0;
+	unsigned long *table = NULL;
+	int size = 0;
+	bool force = false;
+	int c;
+	int ret = 0;
+
+	if (ctrl->id != V4L2_CID_AUDIO_MUTE)
+		return -EINVAL;
+	if (ctrl->is_new) {
+		if (ctrl->val) {
+			ret = si4713_set_mute(sdev, ctrl->val);
+			if (!ret)
+				ret = si4713_set_power_state(sdev, POWER_DOWN);
+			return ret;
+		}
+		ret = si4713_set_power_state(sdev, POWER_UP);
+		if (!ret)
+			ret = si4713_set_mute(sdev, ctrl->val);
+		if (!ret)
+			ret = si4713_setup(sdev);
+		if (ret)
+			return ret;
+		force = true;
+	}
+
+	if (!sdev->power_state)
+		return 0;
+
+	for (c = 1; !ret && c < ctrl->ncontrols; c++) {
+		ctrl = ctrl->cluster[c];
+
+		if (!force && !ctrl->is_new)
+			continue;
+
+		switch (ctrl->id) {
+		case V4L2_CID_RDS_TX_PS_NAME:
+			ret = si4713_set_rds_ps_name(sdev, ctrl->p_new.p_char);
+			break;
+
+		case V4L2_CID_RDS_TX_RADIO_TEXT:
+			ret = si4713_set_rds_radio_text(sdev, ctrl->p_new.p_char);
+			break;
+
+		case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+			/* don't handle this control if we force setting all
+			 * controls since in that case it will be handled by
+			 * V4L2_CID_TUNE_POWER_LEVEL. */
+			if (force)
+				break;
+			fallthrough;
+		case V4L2_CID_TUNE_POWER_LEVEL:
+			ret = si4713_tx_tune_power(sdev,
+				sdev->tune_pwr_level->val, sdev->tune_ant_cap->val);
+			if (!ret) {
+				/* Make sure we don't set this twice */
+				sdev->tune_ant_cap->is_new = false;
+				sdev->tune_pwr_level->is_new = false;
+			}
+			break;
+
+		case V4L2_CID_RDS_TX_ALT_FREQS_ENABLE:
+		case V4L2_CID_RDS_TX_ALT_FREQS:
+			if (sdev->rds_alt_freqs_enable->val) {
+				val = sdev->rds_alt_freqs->p_new.p_u32[0];
+				val = val / 100 - 876 + 0xe101;
+			} else {
+				val = 0xe0e0;
+			}
+			ret = si4713_write_property(sdev, SI4713_TX_RDS_PS_AF, val);
+			break;
+
+		default:
+			ret = si4713_choose_econtrol_action(sdev, ctrl->id, &bit,
+					&mask, &property, &mul, &table, &size);
+			if (ret < 0)
+				break;
+
+			val = ctrl->val;
+			if (mul) {
+				val = val / mul;
+			} else if (table) {
+				ret = usecs_to_dev(val, table, size);
+				if (ret < 0)
+					break;
+				val = ret;
+				ret = 0;
+			}
+
+			if (mask) {
+				ret = si4713_read_property(sdev, property, &val);
+				if (ret < 0)
+					break;
+				val = set_bits(val, ctrl->val, bit, mask);
+			}
+
+			ret = si4713_write_property(sdev, property, val);
+			if (ret < 0)
+				break;
+			if (mask)
+				val = ctrl->val;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+/* si4713_ioctl - deal with private ioctls (only rnl for now) */
+static long si4713_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	struct si4713_rnl *rnl = arg;
+	u16 frequency;
+	int rval = 0;
+
+	if (!arg)
+		return -EINVAL;
+
+	switch (cmd) {
+	case SI4713_IOC_MEASURE_RNL:
+		frequency = v4l2_to_si4713(rnl->frequency);
+
+		if (sdev->power_state) {
+			/* Set desired measurement frequency */
+			rval = si4713_tx_tune_measure(sdev, frequency, 0);
+			if (rval < 0)
+				return rval;
+			/* get results from tune status */
+			rval = si4713_update_tune_status(sdev);
+			if (rval < 0)
+				return rval;
+		}
+		rnl->rnl = sdev->tune_rnl;
+		break;
+
+	default:
+		/* nothing */
+		rval = -ENOIOCTLCMD;
+	}
+
+	return rval;
+}
+
+/* si4713_g_modulator - get modulator attributes */
+static int si4713_g_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	int rval = 0;
+
+	if (!sdev)
+		return -ENODEV;
+
+	if (vm->index > 0)
+		return -EINVAL;
+
+	strscpy(vm->name, "FM Modulator", sizeof(vm->name));
+	vm->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW |
+		V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_CONTROLS;
+
+	/* Report current frequency range limits */
+	vm->rangelow = si4713_to_v4l2(FREQ_RANGE_LOW);
+	vm->rangehigh = si4713_to_v4l2(FREQ_RANGE_HIGH);
+
+	if (sdev->power_state) {
+		u32 comp_en = 0;
+
+		rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE,
+						&comp_en);
+		if (rval < 0)
+			return rval;
+
+		sdev->stereo = get_status_bit(comp_en, 1, 1 << 1);
+	}
+
+	/* Report current audio mode: mono or stereo */
+	if (sdev->stereo)
+		vm->txsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		vm->txsubchans = V4L2_TUNER_SUB_MONO;
+
+	/* Report rds feature status */
+	if (sdev->rds_enabled)
+		vm->txsubchans |= V4L2_TUNER_SUB_RDS;
+	else
+		vm->txsubchans &= ~V4L2_TUNER_SUB_RDS;
+
+	return rval;
+}
+
+/* si4713_s_modulator - set modulator attributes */
+static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *vm)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	int rval = 0;
+	u16 stereo, rds;
+	u32 p;
+
+	if (!sdev)
+		return -ENODEV;
+
+	if (vm->index > 0)
+		return -EINVAL;
+
+	/* Set audio mode: mono or stereo */
+	if (vm->txsubchans & V4L2_TUNER_SUB_STEREO)
+		stereo = 1;
+	else if (vm->txsubchans & V4L2_TUNER_SUB_MONO)
+		stereo = 0;
+	else
+		return -EINVAL;
+
+	rds = !!(vm->txsubchans & V4L2_TUNER_SUB_RDS);
+
+	if (sdev->power_state) {
+		rval = si4713_read_property(sdev,
+						SI4713_TX_COMPONENT_ENABLE, &p);
+		if (rval < 0)
+			return rval;
+
+		p = set_bits(p, stereo, 1, 1 << 1);
+		p = set_bits(p, rds, 2, 1 << 2);
+
+		rval = si4713_write_property(sdev,
+						SI4713_TX_COMPONENT_ENABLE, p);
+		if (rval < 0)
+			return rval;
+	}
+
+	sdev->stereo = stereo;
+	sdev->rds_enabled = rds;
+
+	return rval;
+}
+
+/* si4713_g_frequency - get tuner or modulator radio frequency */
+static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	int rval = 0;
+
+	if (f->tuner)
+		return -EINVAL;
+
+	if (sdev->power_state) {
+		u16 freq;
+		u8 p, a, n;
+
+		rval = si4713_tx_tune_status(sdev, 0x00, &freq, &p, &a, &n);
+		if (rval < 0)
+			return rval;
+
+		sdev->frequency = freq;
+	}
+
+	f->frequency = si4713_to_v4l2(sdev->frequency);
+
+	return rval;
+}
+
+/* si4713_s_frequency - set tuner or modulator radio frequency */
+static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	int rval = 0;
+	u16 frequency = v4l2_to_si4713(f->frequency);
+
+	if (f->tuner)
+		return -EINVAL;
+
+	/* Check frequency range */
+	frequency = clamp_t(u16, frequency, FREQ_RANGE_LOW, FREQ_RANGE_HIGH);
+
+	if (sdev->power_state) {
+		rval = si4713_tx_tune_freq(sdev, frequency);
+		if (rval < 0)
+			return rval;
+		frequency = rval;
+		rval = 0;
+	}
+	sdev->frequency = frequency;
+
+	return rval;
+}
+
+static const struct v4l2_ctrl_ops si4713_ctrl_ops = {
+	.s_ctrl = si4713_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops si4713_subdev_core_ops = {
+	.ioctl		= si4713_ioctl,
+};
+
+static const struct v4l2_subdev_tuner_ops si4713_subdev_tuner_ops = {
+	.g_frequency	= si4713_g_frequency,
+	.s_frequency	= si4713_s_frequency,
+	.g_modulator	= si4713_g_modulator,
+	.s_modulator	= si4713_s_modulator,
+};
+
+static const struct v4l2_subdev_ops si4713_subdev_ops = {
+	.core		= &si4713_subdev_core_ops,
+	.tuner		= &si4713_subdev_tuner_ops,
+};
+
+static const struct v4l2_ctrl_config si4713_alt_freqs_ctrl = {
+	.id = V4L2_CID_RDS_TX_ALT_FREQS,
+	.type = V4L2_CTRL_TYPE_U32,
+	.min = 87600,
+	.max = 107900,
+	.step = 100,
+	.def = 87600,
+	.dims = { 1 },
+	.elem_size = sizeof(u32),
+};
+
+/*
+ * I2C driver interface
+ */
+/* si4713_probe - probe for the device */
+static int si4713_probe(struct i2c_client *client)
+{
+	struct si4713_device *sdev;
+	struct v4l2_ctrl_handler *hdl;
+	struct si4713_platform_data *pdata = client->dev.platform_data;
+	struct device_node *np = client->dev.of_node;
+	struct radio_si4713_platform_data si4713_pdev_pdata;
+	struct platform_device *si4713_pdev;
+	int rval;
+
+	sdev = devm_kzalloc(&client->dev, sizeof(*sdev), GFP_KERNEL);
+	if (!sdev) {
+		dev_err(&client->dev, "Failed to alloc video device.\n");
+		rval = -ENOMEM;
+		goto exit;
+	}
+
+	sdev->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
+						   GPIOD_OUT_LOW);
+	if (IS_ERR(sdev->gpio_reset)) {
+		rval = PTR_ERR(sdev->gpio_reset);
+		dev_err(&client->dev, "Failed to request gpio: %d\n", rval);
+		goto exit;
+	}
+
+	sdev->vdd = devm_regulator_get_optional(&client->dev, "vdd");
+	if (IS_ERR(sdev->vdd)) {
+		rval = PTR_ERR(sdev->vdd);
+		if (rval == -EPROBE_DEFER)
+			goto exit;
+
+		dev_dbg(&client->dev, "no vdd regulator found: %d\n", rval);
+		sdev->vdd = NULL;
+	}
+
+	sdev->vio = devm_regulator_get_optional(&client->dev, "vio");
+	if (IS_ERR(sdev->vio)) {
+		rval = PTR_ERR(sdev->vio);
+		if (rval == -EPROBE_DEFER)
+			goto exit;
+
+		dev_dbg(&client->dev, "no vio regulator found: %d\n", rval);
+		sdev->vio = NULL;
+	}
+
+	v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
+
+	init_completion(&sdev->work);
+
+	hdl = &sdev->ctrl_handler;
+	v4l2_ctrl_handler_init(hdl, 20);
+	sdev->mute = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, DEFAULT_MUTE);
+
+	sdev->rds_pi = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_PI, 0, 0xffff, 1, DEFAULT_RDS_PI);
+	sdev->rds_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_PTY, 0, 31, 1, DEFAULT_RDS_PTY);
+	sdev->rds_compressed = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_COMPRESSED, 0, 1, 1, 0);
+	sdev->rds_art_head = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_ARTIFICIAL_HEAD, 0, 1, 1, 0);
+	sdev->rds_stereo = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_MONO_STEREO, 0, 1, 1, 1);
+	sdev->rds_tp = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_TRAFFIC_PROGRAM, 0, 1, 1, 0);
+	sdev->rds_ta = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0);
+	sdev->rds_ms = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_MUSIC_SPEECH, 0, 1, 1, 1);
+	sdev->rds_dyn_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_DYNAMIC_PTY, 0, 1, 1, 0);
+	sdev->rds_alt_freqs_enable = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_ALT_FREQS_ENABLE, 0, 1, 1, 0);
+	sdev->rds_alt_freqs = v4l2_ctrl_new_custom(hdl, &si4713_alt_freqs_ctrl, NULL);
+	sdev->rds_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_DEVIATION, 0, MAX_RDS_DEVIATION,
+			10, DEFAULT_RDS_DEVIATION);
+	/*
+	 * Report step as 8. From RDS spec, psname
+	 * should be 8. But there are receivers which scroll strings
+	 * sized as 8xN.
+	 */
+	sdev->rds_ps_name = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_PS_NAME, 0, MAX_RDS_PS_NAME, 8, 0);
+	/*
+	 * Report step as 32 (2A block). From RDS spec,
+	 * radio text should be 32 for 2A block. But there are receivers
+	 * which scroll strings sized as 32xN. Setting default to 32.
+	 */
+	sdev->rds_radio_text = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_RADIO_TEXT, 0, MAX_RDS_RADIO_TEXT, 32, 0);
+
+	sdev->limiter_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_LIMITER_ENABLED, 0, 1, 1, 1);
+	sdev->limiter_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_LIMITER_RELEASE_TIME, 250,
+			MAX_LIMITER_RELEASE_TIME, 10, DEFAULT_LIMITER_RTIME);
+	sdev->limiter_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_LIMITER_DEVIATION, 0,
+			MAX_LIMITER_DEVIATION, 10, DEFAULT_LIMITER_DEV);
+
+	sdev->compression_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_ENABLED, 0, 1, 1, 1);
+	sdev->compression_gain = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1,
+			DEFAULT_ACOMP_GAIN);
+	sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_THRESHOLD,
+			MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1,
+			DEFAULT_ACOMP_THRESHOLD);
+	sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0,
+			MAX_ACOMP_ATTACK_TIME, 500, DEFAULT_ACOMP_ATIME);
+	sdev->compression_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME, 100000,
+			MAX_ACOMP_RELEASE_TIME, 100000, DEFAULT_ACOMP_RTIME);
+
+	sdev->pilot_tone_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_PILOT_TONE_ENABLED, 0, 1, 1, 1);
+	sdev->pilot_tone_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_PILOT_TONE_DEVIATION, 0, MAX_PILOT_DEVIATION,
+			10, DEFAULT_PILOT_DEVIATION);
+	sdev->pilot_tone_freq = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_PILOT_TONE_FREQUENCY, 0, MAX_PILOT_FREQUENCY,
+			1, DEFAULT_PILOT_FREQUENCY);
+
+	sdev->tune_preemphasis = v4l2_ctrl_new_std_menu(hdl, &si4713_ctrl_ops,
+			V4L2_CID_TUNE_PREEMPHASIS,
+			V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS);
+	sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER,
+			1, DEFAULT_POWER_LEVEL);
+	sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP,
+			1, 0);
+
+	if (hdl->error) {
+		rval = hdl->error;
+		goto free_ctrls;
+	}
+	v4l2_ctrl_cluster(29, &sdev->mute);
+	sdev->sd.ctrl_handler = hdl;
+
+	if (client->irq) {
+		rval = devm_request_irq(&client->dev, client->irq,
+			si4713_handler, IRQF_TRIGGER_FALLING,
+			client->name, sdev);
+		if (rval < 0) {
+			v4l2_err(&sdev->sd, "Could not request IRQ\n");
+			goto free_ctrls;
+		}
+		v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
+	} else {
+		v4l2_warn(&sdev->sd, "IRQ not configured. Using timeouts.\n");
+	}
+
+	rval = si4713_initialize(sdev);
+	if (rval < 0) {
+		v4l2_err(&sdev->sd, "Failed to probe device information.\n");
+		goto free_ctrls;
+	}
+
+	if (!np && (!pdata || !pdata->is_platform_device))
+		return 0;
+
+	si4713_pdev = platform_device_alloc("radio-si4713", -1);
+	if (!si4713_pdev) {
+		rval = -ENOMEM;
+		goto put_main_pdev;
+	}
+
+	si4713_pdev_pdata.subdev = client;
+	rval = platform_device_add_data(si4713_pdev, &si4713_pdev_pdata,
+					sizeof(si4713_pdev_pdata));
+	if (rval)
+		goto put_main_pdev;
+
+	rval = platform_device_add(si4713_pdev);
+	if (rval)
+		goto put_main_pdev;
+
+	sdev->pd = si4713_pdev;
+
+	return 0;
+
+put_main_pdev:
+	platform_device_put(si4713_pdev);
+	v4l2_device_unregister_subdev(&sdev->sd);
+free_ctrls:
+	v4l2_ctrl_handler_free(hdl);
+exit:
+	return rval;
+}
+
+/* si4713_remove - remove the device */
+static void si4713_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct si4713_device *sdev = to_si4713_device(sd);
+
+	platform_device_unregister(sdev->pd);
+
+	if (sdev->power_state)
+		si4713_set_power_state(sdev, POWER_DOWN);
+
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+}
+
+/* si4713_i2c_driver - i2c driver interface */
+static const struct i2c_device_id si4713_id[] = {
+	{ .name = "si4713" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, si4713_id);
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id si4713_of_match[] = {
+	{ .compatible = "silabs,si4713" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, si4713_of_match);
+#endif
+
+static struct i2c_driver si4713_i2c_driver = {
+	.driver		= {
+		.name	= "si4713",
+		.of_match_table = of_match_ptr(si4713_of_match),
+	},
+	.probe		= si4713_probe,
+	.remove         = si4713_remove,
+	.id_table       = si4713_id,
+};
+
+module_i2c_driver(si4713_i2c_driver);
diff --git a/drivers/media/radio/si4713/si4713.h b/drivers/media/radio/si4713/si4713.h
new file mode 100644
index 000000000..29d0e1f10
--- /dev/null
+++ b/drivers/media/radio/si4713/si4713.h
@@ -0,0 +1,254 @@
+/*
+ * drivers/media/radio/si4713-i2c.h
+ *
+ * Property and commands definitions for Si4713 radio transmitter chip.
+ *
+ * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef SI4713_I2C_H
+#define SI4713_I2C_H
+
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-ctrls.h>
+#include <linux/platform_data/media/si4713.h>
+
+#define SI4713_PRODUCT_NUMBER		0x0D
+
+/* Command Timeouts */
+#define DEFAULT_TIMEOUT			500
+#define TIMEOUT_SET_PROPERTY		20
+#define TIMEOUT_TX_TUNE_POWER		30000
+#define TIMEOUT_TX_TUNE			110000
+#define TIMEOUT_POWER_UP		200000
+
+/*
+ * Command and its arguments definitions
+ */
+#define SI4713_PWUP_CTSIEN		(1<<7)
+#define SI4713_PWUP_GPO2OEN		(1<<6)
+#define SI4713_PWUP_PATCH		(1<<5)
+#define SI4713_PWUP_XOSCEN		(1<<4)
+#define SI4713_PWUP_FUNC_TX		0x02
+#define SI4713_PWUP_FUNC_PATCH		0x0F
+#define SI4713_PWUP_OPMOD_ANALOG	0x50
+#define SI4713_PWUP_OPMOD_DIGITAL	0x0F
+#define SI4713_PWUP_NARGS		2
+#define SI4713_PWUP_NRESP		1
+#define SI4713_CMD_POWER_UP		0x01
+
+#define SI4713_GETREV_NRESP		9
+#define SI4713_CMD_GET_REV		0x10
+
+#define SI4713_PWDN_NRESP		1
+#define SI4713_CMD_POWER_DOWN		0x11
+
+#define SI4713_SET_PROP_NARGS		5
+#define SI4713_SET_PROP_NRESP		1
+#define SI4713_CMD_SET_PROPERTY		0x12
+
+#define SI4713_GET_PROP_NARGS		3
+#define SI4713_GET_PROP_NRESP		4
+#define SI4713_CMD_GET_PROPERTY		0x13
+
+#define SI4713_GET_STATUS_NRESP		1
+#define SI4713_CMD_GET_INT_STATUS	0x14
+
+#define SI4713_CMD_PATCH_ARGS		0x15
+#define SI4713_CMD_PATCH_DATA		0x16
+
+#define SI4713_MAX_FREQ			10800
+#define SI4713_MIN_FREQ			7600
+#define SI4713_TXFREQ_NARGS		3
+#define SI4713_TXFREQ_NRESP		1
+#define SI4713_CMD_TX_TUNE_FREQ		0x30
+
+#define SI4713_MAX_POWER		120
+#define SI4713_MIN_POWER		88
+#define SI4713_MAX_ANTCAP		191
+#define SI4713_MIN_ANTCAP		0
+#define SI4713_TXPWR_NARGS		4
+#define SI4713_TXPWR_NRESP		1
+#define SI4713_CMD_TX_TUNE_POWER	0x31
+
+#define SI4713_TXMEA_NARGS		4
+#define SI4713_TXMEA_NRESP		1
+#define SI4713_CMD_TX_TUNE_MEASURE	0x32
+
+#define SI4713_INTACK_MASK		0x01
+#define SI4713_TXSTATUS_NARGS		1
+#define SI4713_TXSTATUS_NRESP		8
+#define SI4713_CMD_TX_TUNE_STATUS	0x33
+
+#define SI4713_OVERMOD_BIT		(1 << 2)
+#define SI4713_IALH_BIT			(1 << 1)
+#define SI4713_IALL_BIT			(1 << 0)
+#define SI4713_ASQSTATUS_NARGS		1
+#define SI4713_ASQSTATUS_NRESP		5
+#define SI4713_CMD_TX_ASQ_STATUS	0x34
+
+#define SI4713_RDSBUFF_MODE_MASK	0x87
+#define SI4713_RDSBUFF_NARGS		7
+#define SI4713_RDSBUFF_NRESP		6
+#define SI4713_CMD_TX_RDS_BUFF		0x35
+
+#define SI4713_RDSPS_PSID_MASK		0x1F
+#define SI4713_RDSPS_NARGS		5
+#define SI4713_RDSPS_NRESP		1
+#define SI4713_CMD_TX_RDS_PS		0x36
+
+#define SI4713_CMD_GPO_CTL		0x80
+#define SI4713_CMD_GPO_SET		0x81
+
+/*
+ * Bits from status response
+ */
+#define SI4713_CTS			(1<<7)
+#define SI4713_ERR			(1<<6)
+#define SI4713_RDS_INT			(1<<2)
+#define SI4713_ASQ_INT			(1<<1)
+#define SI4713_STC_INT			(1<<0)
+
+/*
+ * Property definitions
+ */
+#define SI4713_GPO_IEN			0x0001
+#define SI4713_DIG_INPUT_FORMAT		0x0101
+#define SI4713_DIG_INPUT_SAMPLE_RATE	0x0103
+#define SI4713_REFCLK_FREQ		0x0201
+#define SI4713_REFCLK_PRESCALE		0x0202
+#define SI4713_TX_COMPONENT_ENABLE	0x2100
+#define SI4713_TX_AUDIO_DEVIATION	0x2101
+#define SI4713_TX_PILOT_DEVIATION	0x2102
+#define SI4713_TX_RDS_DEVIATION		0x2103
+#define SI4713_TX_LINE_INPUT_LEVEL	0x2104
+#define SI4713_TX_LINE_INPUT_MUTE	0x2105
+#define SI4713_TX_PREEMPHASIS		0x2106
+#define SI4713_TX_PILOT_FREQUENCY	0x2107
+#define SI4713_TX_ACOMP_ENABLE		0x2200
+#define SI4713_TX_ACOMP_THRESHOLD	0x2201
+#define SI4713_TX_ACOMP_ATTACK_TIME	0x2202
+#define SI4713_TX_ACOMP_RELEASE_TIME	0x2203
+#define SI4713_TX_ACOMP_GAIN		0x2204
+#define SI4713_TX_LIMITER_RELEASE_TIME	0x2205
+#define SI4713_TX_ASQ_INTERRUPT_SOURCE	0x2300
+#define SI4713_TX_ASQ_LEVEL_LOW		0x2301
+#define SI4713_TX_ASQ_DURATION_LOW	0x2302
+#define SI4713_TX_ASQ_LEVEL_HIGH	0x2303
+#define SI4713_TX_ASQ_DURATION_HIGH	0x2304
+#define SI4713_TX_RDS_INTERRUPT_SOURCE	0x2C00
+#define SI4713_TX_RDS_PI		0x2C01
+#define SI4713_TX_RDS_PS_MIX		0x2C02
+#define SI4713_TX_RDS_PS_MISC		0x2C03
+#define SI4713_TX_RDS_PS_REPEAT_COUNT	0x2C04
+#define SI4713_TX_RDS_PS_MESSAGE_COUNT	0x2C05
+#define SI4713_TX_RDS_PS_AF		0x2C06
+#define SI4713_TX_RDS_FIFO_SIZE		0x2C07
+
+#define PREEMPHASIS_USA			75
+#define PREEMPHASIS_EU			50
+#define PREEMPHASIS_DISABLED		0
+#define FMPE_USA			0x00
+#define FMPE_EU				0x01
+#define FMPE_DISABLED			0x02
+
+#define POWER_UP			0x01
+#define POWER_DOWN			0x00
+
+#define MAX_RDS_PTY			31
+#define MAX_RDS_DEVIATION		90000
+
+/*
+ * PSNAME is known to be defined as 8 character sized (RDS Spec).
+ * However, there is receivers which scroll PSNAME 8xN sized.
+ */
+#define MAX_RDS_PS_NAME			96
+
+/*
+ * MAX_RDS_RADIO_TEXT is known to be defined as 32 (2A group) or 64 (2B group)
+ * character sized (RDS Spec).
+ * However, there is receivers which scroll them as well.
+ */
+#define MAX_RDS_RADIO_TEXT		384
+
+#define MAX_LIMITER_RELEASE_TIME	102390
+#define MAX_LIMITER_DEVIATION		90000
+
+#define MAX_PILOT_DEVIATION		90000
+#define MAX_PILOT_FREQUENCY		19000
+
+#define MAX_ACOMP_RELEASE_TIME		1000000
+#define MAX_ACOMP_ATTACK_TIME		5000
+#define MAX_ACOMP_THRESHOLD		0
+#define MIN_ACOMP_THRESHOLD		(-40)
+#define MAX_ACOMP_GAIN			20
+
+/*
+ * si4713_device - private data
+ */
+struct si4713_device {
+	/* v4l2_subdev and i2c reference (v4l2_subdev priv data) */
+	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler ctrl_handler;
+	/* private data structures */
+	struct { /* si4713 control cluster */
+		/* This is one big cluster since the mute control
+		 * powers off the device and after unmuting again all
+		 * controls need to be set at once. The only way of doing
+		 * that is by making it one big cluster. */
+		struct v4l2_ctrl *mute;
+		struct v4l2_ctrl *rds_ps_name;
+		struct v4l2_ctrl *rds_radio_text;
+		struct v4l2_ctrl *rds_pi;
+		struct v4l2_ctrl *rds_deviation;
+		struct v4l2_ctrl *rds_pty;
+		struct v4l2_ctrl *rds_compressed;
+		struct v4l2_ctrl *rds_art_head;
+		struct v4l2_ctrl *rds_stereo;
+		struct v4l2_ctrl *rds_ta;
+		struct v4l2_ctrl *rds_tp;
+		struct v4l2_ctrl *rds_ms;
+		struct v4l2_ctrl *rds_dyn_pty;
+		struct v4l2_ctrl *rds_alt_freqs_enable;
+		struct v4l2_ctrl *rds_alt_freqs;
+		struct v4l2_ctrl *compression_enabled;
+		struct v4l2_ctrl *compression_threshold;
+		struct v4l2_ctrl *compression_gain;
+		struct v4l2_ctrl *compression_attack_time;
+		struct v4l2_ctrl *compression_release_time;
+		struct v4l2_ctrl *pilot_tone_enabled;
+		struct v4l2_ctrl *pilot_tone_freq;
+		struct v4l2_ctrl *pilot_tone_deviation;
+		struct v4l2_ctrl *limiter_enabled;
+		struct v4l2_ctrl *limiter_deviation;
+		struct v4l2_ctrl *limiter_release_time;
+		struct v4l2_ctrl *tune_preemphasis;
+		struct v4l2_ctrl *tune_pwr_level;
+		struct v4l2_ctrl *tune_ant_cap;
+	};
+	struct completion work;
+	struct regulator *vdd;
+	struct regulator *vio;
+	struct gpio_desc *gpio_reset;
+	struct platform_device *pd;
+	u32 power_state;
+	u32 rds_enabled;
+	u32 frequency;
+	u32 preemphasis;
+	u32 stereo;
+	u32 tune_rnl;
+};
+
+struct radio_si4713_platform_data {
+	struct i2c_client *subdev;
+};
+#endif /* ifndef SI4713_I2C_H */
diff --git a/drivers/media/radio/tea575x.c b/drivers/media/radio/tea575x.c
new file mode 100644
index 000000000..c37315226
--- /dev/null
+++ b/drivers/media/radio/tea575x.c
@@ -0,0 +1,577 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *   ALSA driver for TEA5757/5759 Philips AM/FM radio tuner chips
+ *
+ *	Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <asm/io.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include <media/drv-intf/tea575x.h>
+
+MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
+MODULE_DESCRIPTION("Routines for control of TEA5757/5759 Philips AM/FM radio tuner chips");
+MODULE_LICENSE("GPL");
+
+/*
+ * definitions
+ */
+
+#define TEA575X_BIT_SEARCH	(1<<24)		/* 1 = search action, 0 = tuned */
+#define TEA575X_BIT_UPDOWN	(1<<23)		/* 0 = search down, 1 = search up */
+#define TEA575X_BIT_MONO	(1<<22)		/* 0 = stereo, 1 = mono */
+#define TEA575X_BIT_BAND_MASK	(3<<20)
+#define TEA575X_BIT_BAND_FM	(0<<20)
+#define TEA575X_BIT_BAND_MW	(1<<20)
+#define TEA575X_BIT_BAND_LW	(2<<20)
+#define TEA575X_BIT_BAND_SW	(3<<20)
+#define TEA575X_BIT_PORT_0	(1<<19)		/* user bit */
+#define TEA575X_BIT_PORT_1	(1<<18)		/* user bit */
+#define TEA575X_BIT_SEARCH_MASK	(3<<16)		/* search level */
+#define TEA575X_BIT_SEARCH_5_28	     (0<<16)	/* FM >5uV, AM >28uV */
+#define TEA575X_BIT_SEARCH_10_40     (1<<16)	/* FM >10uV, AM > 40uV */
+#define TEA575X_BIT_SEARCH_30_63     (2<<16)	/* FM >30uV, AM > 63uV */
+#define TEA575X_BIT_SEARCH_150_1000  (3<<16)	/* FM > 150uV, AM > 1000uV */
+#define TEA575X_BIT_DUMMY	(1<<15)		/* buffer */
+#define TEA575X_BIT_FREQ_MASK	0x7fff
+
+enum { BAND_FM, BAND_FM_JAPAN, BAND_AM };
+
+static const struct v4l2_frequency_band bands[] = {
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			      V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   =  87500 * 16,
+		.rangehigh  = 108000 * 16,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			      V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = 76000 * 16,
+		.rangehigh  = 91000 * 16,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 1,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   =  530 * 16,
+		.rangehigh  = 1710 * 16,
+		.modulation = V4L2_BAND_MODULATION_AM,
+	},
+};
+
+/*
+ * lowlevel part
+ */
+
+static void snd_tea575x_write(struct snd_tea575x *tea, unsigned int val)
+{
+	u16 l;
+	u8 data;
+
+	if (tea->ops->write_val)
+		return tea->ops->write_val(tea, val);
+
+	tea->ops->set_direction(tea, 1);
+	udelay(16);
+
+	for (l = 25; l > 0; l--) {
+		data = (val >> 24) & TEA575X_DATA;
+		val <<= 1;			/* shift data */
+		tea->ops->set_pins(tea, data | TEA575X_WREN);
+		udelay(2);
+		tea->ops->set_pins(tea, data | TEA575X_WREN | TEA575X_CLK);
+		udelay(2);
+		tea->ops->set_pins(tea, data | TEA575X_WREN);
+		udelay(2);
+	}
+
+	if (!tea->mute)
+		tea->ops->set_pins(tea, 0);
+}
+
+static u32 snd_tea575x_read(struct snd_tea575x *tea)
+{
+	u16 l, rdata;
+	u32 data = 0;
+
+	if (tea->ops->read_val)
+		return tea->ops->read_val(tea);
+
+	tea->ops->set_direction(tea, 0);
+	tea->ops->set_pins(tea, 0);
+	udelay(16);
+
+	for (l = 24; l--;) {
+		tea->ops->set_pins(tea, TEA575X_CLK);
+		udelay(2);
+		if (!l)
+			tea->tuned = tea->ops->get_pins(tea) & TEA575X_MOST ? 0 : 1;
+		tea->ops->set_pins(tea, 0);
+		udelay(2);
+		data <<= 1;			/* shift data */
+		rdata = tea->ops->get_pins(tea);
+		if (!l)
+			tea->stereo = (rdata & TEA575X_MOST) ?  0 : 1;
+		if (rdata & TEA575X_DATA)
+			data++;
+		udelay(2);
+	}
+
+	if (tea->mute)
+		tea->ops->set_pins(tea, TEA575X_WREN);
+
+	return data;
+}
+
+static u32 snd_tea575x_val_to_freq(struct snd_tea575x *tea, u32 val)
+{
+	u32 freq = val & TEA575X_BIT_FREQ_MASK;
+
+	if (freq == 0)
+		return freq;
+
+	switch (tea->band) {
+	case BAND_FM:
+		/* freq *= 12.5 */
+		freq *= 125;
+		freq /= 10;
+		/* crystal fixup */
+		freq -= TEA575X_FMIF;
+		break;
+	case BAND_FM_JAPAN:
+		/* freq *= 12.5 */
+		freq *= 125;
+		freq /= 10;
+		/* crystal fixup */
+		freq += TEA575X_FMIF;
+		break;
+	case BAND_AM:
+		/* crystal fixup */
+		freq -= TEA575X_AMIF;
+		break;
+	}
+
+	return clamp(freq * 16, bands[tea->band].rangelow,
+				bands[tea->band].rangehigh); /* from kHz */
+}
+
+static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+{
+	return snd_tea575x_val_to_freq(tea, snd_tea575x_read(tea));
+}
+
+void snd_tea575x_set_freq(struct snd_tea575x *tea)
+{
+	u32 freq = tea->freq / 16;	/* to kHz */
+	u32 band = 0;
+
+	switch (tea->band) {
+	case BAND_FM:
+		band = TEA575X_BIT_BAND_FM;
+		/* crystal fixup */
+		freq += TEA575X_FMIF;
+		/* freq /= 12.5 */
+		freq *= 10;
+		freq /= 125;
+		break;
+	case BAND_FM_JAPAN:
+		band = TEA575X_BIT_BAND_FM;
+		/* crystal fixup */
+		freq -= TEA575X_FMIF;
+		/* freq /= 12.5 */
+		freq *= 10;
+		freq /= 125;
+		break;
+	case BAND_AM:
+		band = TEA575X_BIT_BAND_MW;
+		/* crystal fixup */
+		freq += TEA575X_AMIF;
+		break;
+	}
+
+	tea->val &= ~(TEA575X_BIT_FREQ_MASK | TEA575X_BIT_BAND_MASK);
+	tea->val |= band;
+	tea->val |= freq & TEA575X_BIT_FREQ_MASK;
+	snd_tea575x_write(tea, tea->val);
+	tea->freq = snd_tea575x_val_to_freq(tea, tea->val);
+}
+EXPORT_SYMBOL(snd_tea575x_set_freq);
+
+/*
+ * Linux Video interface
+ */
+
+static int vidioc_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *v)
+{
+	struct snd_tea575x *tea = video_drvdata(file);
+
+	strscpy(v->driver, tea->v4l2_dev->name, sizeof(v->driver));
+	strscpy(v->card, tea->card, sizeof(v->card));
+	strlcat(v->card, tea->tea5759 ? " TEA5759" : " TEA5757", sizeof(v->card));
+	strscpy(v->bus_info, tea->bus_info, sizeof(v->bus_info));
+	return 0;
+}
+
+int snd_tea575x_enum_freq_bands(struct snd_tea575x *tea,
+					struct v4l2_frequency_band *band)
+{
+	int index;
+
+	if (band->tuner != 0)
+		return -EINVAL;
+
+	switch (band->index) {
+	case 0:
+		if (tea->tea5759)
+			index = BAND_FM_JAPAN;
+		else
+			index = BAND_FM;
+		break;
+	case 1:
+		if (tea->has_am) {
+			index = BAND_AM;
+			break;
+		}
+		fallthrough;
+	default:
+		return -EINVAL;
+	}
+
+	*band = bands[index];
+	if (!tea->cannot_read_data)
+		band->capability |= V4L2_TUNER_CAP_HWSEEK_BOUNDED;
+
+	return 0;
+}
+EXPORT_SYMBOL(snd_tea575x_enum_freq_bands);
+
+static int vidioc_enum_freq_bands(struct file *file, void *priv,
+					 struct v4l2_frequency_band *band)
+{
+	struct snd_tea575x *tea = video_drvdata(file);
+
+	return snd_tea575x_enum_freq_bands(tea, band);
+}
+
+int snd_tea575x_g_tuner(struct snd_tea575x *tea, struct v4l2_tuner *v)
+{
+	struct v4l2_frequency_band band_fm = { 0, };
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	snd_tea575x_read(tea);
+	snd_tea575x_enum_freq_bands(tea, &band_fm);
+
+	memset(v, 0, sizeof(*v));
+	strscpy(v->name, tea->has_am ? "FM/AM" : "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->capability = band_fm.capability;
+	v->rangelow = tea->has_am ? bands[BAND_AM].rangelow : band_fm.rangelow;
+	v->rangehigh = band_fm.rangehigh;
+	v->rxsubchans = tea->stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
+	v->audmode = (tea->val & TEA575X_BIT_MONO) ?
+		V4L2_TUNER_MODE_MONO : V4L2_TUNER_MODE_STEREO;
+	v->signal = tea->tuned ? 0xffff : 0;
+	return 0;
+}
+EXPORT_SYMBOL(snd_tea575x_g_tuner);
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+					struct v4l2_tuner *v)
+{
+	struct snd_tea575x *tea = video_drvdata(file);
+
+	return snd_tea575x_g_tuner(tea, v);
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+					const struct v4l2_tuner *v)
+{
+	struct snd_tea575x *tea = video_drvdata(file);
+	u32 orig_val = tea->val;
+
+	if (v->index)
+		return -EINVAL;
+	tea->val &= ~TEA575X_BIT_MONO;
+	if (v->audmode == V4L2_TUNER_MODE_MONO)
+		tea->val |= TEA575X_BIT_MONO;
+	/* Only apply changes if currently tuning FM */
+	if (tea->band != BAND_AM && tea->val != orig_val)
+		snd_tea575x_set_freq(tea);
+
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+					struct v4l2_frequency *f)
+{
+	struct snd_tea575x *tea = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = tea->freq;
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+					const struct v4l2_frequency *f)
+{
+	struct snd_tea575x *tea = video_drvdata(file);
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	if (tea->has_am && f->frequency < (20000 * 16))
+		tea->band = BAND_AM;
+	else if (tea->tea5759)
+		tea->band = BAND_FM_JAPAN;
+	else
+		tea->band = BAND_FM;
+
+	tea->freq = clamp_t(u32, f->frequency, bands[tea->band].rangelow,
+					bands[tea->band].rangehigh);
+	snd_tea575x_set_freq(tea);
+	return 0;
+}
+
+int snd_tea575x_s_hw_freq_seek(struct file *file, struct snd_tea575x *tea,
+				const struct v4l2_hw_freq_seek *a)
+{
+	unsigned long timeout;
+	int i, spacing;
+
+	if (tea->cannot_read_data)
+		return -ENOTTY;
+	if (a->tuner || a->wrap_around)
+		return -EINVAL;
+
+	if (file->f_flags & O_NONBLOCK)
+		return -EWOULDBLOCK;
+
+	if (a->rangelow || a->rangehigh) {
+		for (i = 0; i < ARRAY_SIZE(bands); i++) {
+			if ((i == BAND_FM && tea->tea5759) ||
+			    (i == BAND_FM_JAPAN && !tea->tea5759) ||
+			    (i == BAND_AM && !tea->has_am))
+				continue;
+			if (bands[i].rangelow  == a->rangelow &&
+			    bands[i].rangehigh == a->rangehigh)
+				break;
+		}
+		if (i == ARRAY_SIZE(bands))
+			return -EINVAL; /* No matching band found */
+		if (i != tea->band) {
+			tea->band = i;
+			tea->freq = clamp(tea->freq, bands[i].rangelow,
+						     bands[i].rangehigh);
+			snd_tea575x_set_freq(tea);
+		}
+	}
+
+	spacing = (tea->band == BAND_AM) ? 5 : 50; /* kHz */
+
+	/* clear the frequency, HW will fill it in */
+	tea->val &= ~TEA575X_BIT_FREQ_MASK;
+	tea->val |= TEA575X_BIT_SEARCH;
+	if (a->seek_upward)
+		tea->val |= TEA575X_BIT_UPDOWN;
+	else
+		tea->val &= ~TEA575X_BIT_UPDOWN;
+	snd_tea575x_write(tea, tea->val);
+	timeout = jiffies + msecs_to_jiffies(10000);
+	for (;;) {
+		if (time_after(jiffies, timeout))
+			break;
+		if (schedule_timeout_interruptible(msecs_to_jiffies(10))) {
+			/* some signal arrived, stop search */
+			tea->val &= ~TEA575X_BIT_SEARCH;
+			snd_tea575x_set_freq(tea);
+			return -ERESTARTSYS;
+		}
+		if (!(snd_tea575x_read(tea) & TEA575X_BIT_SEARCH)) {
+			u32 freq;
+
+			/* Found a frequency, wait until it can be read */
+			for (i = 0; i < 100; i++) {
+				msleep(10);
+				freq = snd_tea575x_get_freq(tea);
+				if (freq) /* available */
+					break;
+			}
+			if (freq == 0) /* shouldn't happen */
+				break;
+			/*
+			 * if we moved by less than the spacing, or in the
+			 * wrong direction, continue seeking
+			 */
+			if (abs(tea->freq - freq) < 16 * spacing ||
+					(a->seek_upward && freq < tea->freq) ||
+					(!a->seek_upward && freq > tea->freq)) {
+				snd_tea575x_write(tea, tea->val);
+				continue;
+			}
+			tea->freq = freq;
+			tea->val &= ~TEA575X_BIT_SEARCH;
+			return 0;
+		}
+	}
+	tea->val &= ~TEA575X_BIT_SEARCH;
+	snd_tea575x_set_freq(tea);
+	return -ENODATA;
+}
+EXPORT_SYMBOL(snd_tea575x_s_hw_freq_seek);
+
+static int vidioc_s_hw_freq_seek(struct file *file, void *fh,
+					const struct v4l2_hw_freq_seek *a)
+{
+	struct snd_tea575x *tea = video_drvdata(file);
+
+	return snd_tea575x_s_hw_freq_seek(file, tea, a);
+}
+
+static int tea575x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct snd_tea575x *tea = container_of(ctrl->handler, struct snd_tea575x, ctrl_handler);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		tea->mute = ctrl->val;
+		snd_tea575x_set_freq(tea);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static const struct v4l2_file_operations tea575x_fops = {
+	.unlocked_ioctl	= video_ioctl2,
+	.open           = v4l2_fh_open,
+	.release        = v4l2_fh_release,
+	.poll           = v4l2_ctrl_poll,
+};
+
+static const struct v4l2_ioctl_ops tea575x_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_s_hw_freq_seek = vidioc_s_hw_freq_seek,
+	.vidioc_enum_freq_bands = vidioc_enum_freq_bands,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct video_device tea575x_radio = {
+	.ioctl_ops	= &tea575x_ioctl_ops,
+	.release        = video_device_release_empty,
+};
+
+static const struct v4l2_ctrl_ops tea575x_ctrl_ops = {
+	.s_ctrl = tea575x_s_ctrl,
+};
+
+
+int snd_tea575x_hw_init(struct snd_tea575x *tea)
+{
+	tea->mute = true;
+
+	/* Not all devices can or know how to read the data back.
+	   Such devices can set cannot_read_data to true. */
+	if (!tea->cannot_read_data) {
+		snd_tea575x_write(tea, 0x55AA);
+		if (snd_tea575x_read(tea) != 0x55AA)
+			return -ENODEV;
+	}
+
+	tea->val = TEA575X_BIT_BAND_FM | TEA575X_BIT_SEARCH_5_28;
+	tea->freq = 90500 * 16;		/* 90.5Mhz default */
+	snd_tea575x_set_freq(tea);
+
+	return 0;
+}
+EXPORT_SYMBOL(snd_tea575x_hw_init);
+
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner)
+{
+	int retval = snd_tea575x_hw_init(tea);
+
+	if (retval)
+		return retval;
+
+	tea->vd = tea575x_radio;
+	video_set_drvdata(&tea->vd, tea);
+	mutex_init(&tea->mutex);
+	strscpy(tea->vd.name, tea->v4l2_dev->name, sizeof(tea->vd.name));
+	tea->vd.lock = &tea->mutex;
+	tea->vd.v4l2_dev = tea->v4l2_dev;
+	tea->vd.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	if (!tea->cannot_read_data)
+		tea->vd.device_caps |= V4L2_CAP_HW_FREQ_SEEK;
+	tea->fops = tea575x_fops;
+	tea->fops.owner = owner;
+	tea->vd.fops = &tea->fops;
+	/* disable hw_freq_seek if we can't use it */
+	if (tea->cannot_read_data)
+		v4l2_disable_ioctl(&tea->vd, VIDIOC_S_HW_FREQ_SEEK);
+
+	if (!tea->cannot_mute) {
+		tea->vd.ctrl_handler = &tea->ctrl_handler;
+		v4l2_ctrl_handler_init(&tea->ctrl_handler, 1);
+		v4l2_ctrl_new_std(&tea->ctrl_handler, &tea575x_ctrl_ops,
+				  V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+		retval = tea->ctrl_handler.error;
+		if (retval) {
+			v4l2_err(tea->v4l2_dev, "can't initialize controls\n");
+			v4l2_ctrl_handler_free(&tea->ctrl_handler);
+			return retval;
+		}
+
+		if (tea->ext_init) {
+			retval = tea->ext_init(tea);
+			if (retval) {
+				v4l2_ctrl_handler_free(&tea->ctrl_handler);
+				return retval;
+			}
+		}
+
+		v4l2_ctrl_handler_setup(&tea->ctrl_handler);
+	}
+
+	retval = video_register_device(&tea->vd, VFL_TYPE_RADIO, tea->radio_nr);
+	if (retval) {
+		v4l2_err(tea->v4l2_dev, "can't register video device!\n");
+		v4l2_ctrl_handler_free(tea->vd.ctrl_handler);
+		return retval;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(snd_tea575x_init);
+
+void snd_tea575x_exit(struct snd_tea575x *tea)
+{
+	video_unregister_device(&tea->vd);
+	v4l2_ctrl_handler_free(tea->vd.ctrl_handler);
+}
+EXPORT_SYMBOL(snd_tea575x_exit);
diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c
new file mode 100644
index 000000000..2596d7f4f
--- /dev/null
+++ b/drivers/media/radio/tef6862.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tef6862.c Philips TEF6862 Car Radio Enhanced Selectivity Tuner
+ * Copyright (c) 2009 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+
+#define DRIVER_NAME "tef6862"
+
+#define FREQ_MUL 16000
+
+#define TEF6862_LO_FREQ (875U * FREQ_MUL / 10)
+#define TEF6862_HI_FREQ (108U * FREQ_MUL)
+
+/* Write mode sub addresses */
+#define WM_SUB_BANDWIDTH	0x0
+#define WM_SUB_PLLM		0x1
+#define WM_SUB_PLLL		0x2
+#define WM_SUB_DAA		0x3
+#define WM_SUB_AGC		0x4
+#define WM_SUB_BAND		0x5
+#define WM_SUB_CONTROL		0x6
+#define WM_SUB_LEVEL		0x7
+#define WM_SUB_IFCF		0x8
+#define WM_SUB_IFCAP		0x9
+#define WM_SUB_ACD		0xA
+#define WM_SUB_TEST		0xF
+
+/* Different modes of the MSA register */
+#define MSA_MODE_BUFFER		0x0
+#define MSA_MODE_PRESET		0x1
+#define MSA_MODE_SEARCH		0x2
+#define MSA_MODE_AF_UPDATE	0x3
+#define MSA_MODE_JUMP		0x4
+#define MSA_MODE_CHECK		0x5
+#define MSA_MODE_LOAD		0x6
+#define MSA_MODE_END		0x7
+#define MSA_MODE_SHIFT		5
+
+struct tef6862_state {
+	struct v4l2_subdev sd;
+	unsigned long freq;
+};
+
+static inline struct tef6862_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct tef6862_state, sd);
+}
+
+static u16 tef6862_sigstr(struct i2c_client *client)
+{
+	u8 buf[4];
+	int err = i2c_master_recv(client, buf, sizeof(buf));
+	if (err == sizeof(buf))
+		return buf[3] << 8;
+	return 0;
+}
+
+static int tef6862_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *v)
+{
+	if (v->index > 0)
+		return -EINVAL;
+
+	/* only support FM for now */
+	strscpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->rangelow = TEF6862_LO_FREQ;
+	v->rangehigh = TEF6862_HI_FREQ;
+	v->rxsubchans = V4L2_TUNER_SUB_MONO;
+	v->capability = V4L2_TUNER_CAP_LOW;
+	v->audmode = V4L2_TUNER_MODE_STEREO;
+	v->signal = tef6862_sigstr(v4l2_get_subdevdata(sd));
+
+	return 0;
+}
+
+static int tef6862_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *v)
+{
+	return v->index ? -EINVAL : 0;
+}
+
+static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f)
+{
+	struct tef6862_state *state = to_state(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	unsigned freq = f->frequency;
+	u16 pll;
+	u8 i2cmsg[3];
+	int err;
+
+	if (f->tuner != 0)
+		return -EINVAL;
+
+	freq = clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ);
+	pll = 1964 + ((freq - TEF6862_LO_FREQ) * 20) / FREQ_MUL;
+	i2cmsg[0] = (MSA_MODE_PRESET << MSA_MODE_SHIFT) | WM_SUB_PLLM;
+	i2cmsg[1] = (pll >> 8) & 0xff;
+	i2cmsg[2] = pll & 0xff;
+
+	err = i2c_master_send(client, i2cmsg, sizeof(i2cmsg));
+	if (err != sizeof(i2cmsg))
+		return err < 0 ? err : -EIO;
+
+	state->freq = freq;
+	return 0;
+}
+
+static int tef6862_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
+{
+	struct tef6862_state *state = to_state(sd);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = state->freq;
+	return 0;
+}
+
+static const struct v4l2_subdev_tuner_ops tef6862_tuner_ops = {
+	.g_tuner = tef6862_g_tuner,
+	.s_tuner = tef6862_s_tuner,
+	.s_frequency = tef6862_s_frequency,
+	.g_frequency = tef6862_g_frequency,
+};
+
+static const struct v4l2_subdev_ops tef6862_ops = {
+	.tuner = &tef6862_tuner_ops,
+};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int tef6862_probe(struct i2c_client *client)
+{
+	struct tef6862_state *state;
+	struct v4l2_subdev *sd;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	v4l_info(client, "chip found @ 0x%02x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	state = kzalloc_obj(struct tef6862_state);
+	if (state == NULL)
+		return -ENOMEM;
+	state->freq = TEF6862_LO_FREQ;
+
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &tef6862_ops);
+
+	return 0;
+}
+
+static void tef6862_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+	v4l2_device_unregister_subdev(sd);
+	kfree(to_state(sd));
+}
+
+static const struct i2c_device_id tef6862_id[] = {
+	{ .name = DRIVER_NAME },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, tef6862_id);
+
+static struct i2c_driver tef6862_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= tef6862_probe,
+	.remove		= tef6862_remove,
+	.id_table	= tef6862_id,
+};
+
+module_i2c_driver(tef6862_driver);
+
+MODULE_DESCRIPTION("TEF6862 Car Radio Enhanced Selectivity Tuner");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");