Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 428 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/sp2.c b/drivers/media/dvb-frontends/sp2.c
new file mode 100644
index 000000000..63dec4b4f
--- /dev/null
+++ b/drivers/media/dvb-frontends/sp2.c
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * CIMaX SP2/SP2HF (Atmel T90FJR) CI driver
+ *
+ * Copyright (C) 2014 Olli Salonen <olli.salonen@iki.fi>
+ *
+ * Heavily based on CIMax2(R) SP2 driver in conjunction with NetUp Dual
+ * DVB-S2 CI card (cimax2) with following copyrights:
+ *
+ *  Copyright (C) 2009 NetUP Inc.
+ *  Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ *  Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ */
+
+#include "sp2_priv.h"
+
+static int sp2_read_i2c(struct sp2 *s, u8 reg, u8 *buf, int len)
+{
+	int ret;
+	struct i2c_client *client = s->client;
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.buf = &reg,
+			.len = 1
+		}, {
+			.addr = client->addr,
+			.flags	= I2C_M_RD,
+			.buf = buf,
+			.len = len
+		}
+	};
+
+	ret = i2c_transfer(adap, msg, 2);
+
+	if (ret != 2) {
+		dev_err(&client->dev, "i2c read error, reg = 0x%02x, status = %d\n",
+				reg, ret);
+		if (ret < 0)
+			return ret;
+		else
+			return -EIO;
+	}
+
+	dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %02x\n",
+				client->addr, reg, buf[0]);
+
+	return 0;
+}
+
+static int sp2_write_i2c(struct sp2 *s, u8 reg, u8 *buf, int len)
+{
+	int ret;
+	u8 buffer[35];
+	struct i2c_client *client = s->client;
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg = {
+		.addr = client->addr,
+		.flags = 0,
+		.buf = &buffer[0],
+		.len = len + 1
+	};
+
+	if ((len + 1) > sizeof(buffer)) {
+		dev_err(&client->dev, "i2c wr reg=%02x: len=%d is too big!\n",
+				reg, len);
+		return -EINVAL;
+	}
+
+	buffer[0] = reg;
+	memcpy(&buffer[1], buf, len);
+
+	ret = i2c_transfer(adap, &msg, 1);
+
+	if (ret != 1) {
+		dev_err(&client->dev, "i2c write error, reg = 0x%02x, status = %d\n",
+				reg, ret);
+		if (ret < 0)
+			return ret;
+		else
+			return -EIO;
+	}
+
+	dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %*ph\n",
+				client->addr, reg, len, buf);
+
+	return 0;
+}
+
+static int sp2_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, u8 acs,
+			u8 read, int addr, u8 data)
+{
+	struct sp2 *s = en50221->data;
+	u8 store;
+	int mem, ret;
+	int (*ci_op_cam)(void*, u8, int, u8, int*) = s->ci_control;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	/*
+	 * change module access type between IO space and attribute memory
+	 * when needed
+	 */
+	if (s->module_access_type != acs) {
+		ret = sp2_read_i2c(s, 0x00, &store, 1);
+
+		if (ret)
+			return ret;
+
+		store &= ~(SP2_MOD_CTL_ACS1 | SP2_MOD_CTL_ACS0);
+		store |= acs;
+
+		ret = sp2_write_i2c(s, 0x00, &store, 1);
+		if (ret)
+			return ret;
+	}
+
+	s->module_access_type = acs;
+
+	/* implementation of ci_op_cam is device specific */
+	if (ci_op_cam) {
+		ret = ci_op_cam(s->priv, read, addr, data, &mem);
+	} else {
+		dev_err(&s->client->dev, "callback not defined");
+		return -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	dev_dbg(&s->client->dev, "%s: slot=%d, addr=0x%04x, %s, data=%x",
+			(read) ? "read" : "write", slot, addr,
+			(acs == SP2_CI_ATTR_ACS) ? "attr" : "io",
+			(read) ? mem : data);
+
+	if (read)
+		return mem;
+	else
+		return 0;
+
+}
+
+int sp2_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+				int slot, int addr)
+{
+	return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS,
+			SP2_CI_RD, addr, 0);
+}
+
+int sp2_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+				int slot, int addr, u8 data)
+{
+	return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS,
+			SP2_CI_WR, addr, data);
+}
+
+int sp2_ci_read_cam_control(struct dvb_ca_en50221 *en50221,
+				int slot, u8 addr)
+{
+	return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS,
+			SP2_CI_RD, addr, 0);
+}
+
+int sp2_ci_write_cam_control(struct dvb_ca_en50221 *en50221,
+				int slot, u8 addr, u8 data)
+{
+	return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS,
+			SP2_CI_WR, addr, data);
+}
+
+int sp2_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct sp2 *s = en50221->data;
+	u8 buf;
+	int ret;
+
+	dev_dbg(&s->client->dev, "slot: %d\n", slot);
+
+	if (slot != 0)
+		return -EINVAL;
+
+	/* RST on */
+	buf = SP2_MOD_CTL_RST;
+	ret = sp2_write_i2c(s, 0x00, &buf, 1);
+
+	if (ret)
+		return ret;
+
+	usleep_range(500, 600);
+
+	/* RST off */
+	buf = 0x00;
+	ret = sp2_write_i2c(s, 0x00, &buf, 1);
+
+	if (ret)
+		return ret;
+
+	msleep(1000);
+
+	return 0;
+}
+
+int sp2_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct sp2 *s = en50221->data;
+
+	dev_dbg(&s->client->dev, "slot:%d\n", slot);
+
+	/* not implemented */
+	return 0;
+}
+
+int sp2_ci_slot_ts_enable(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct sp2 *s = en50221->data;
+	u8 buf;
+
+	dev_dbg(&s->client->dev, "slot:%d\n", slot);
+
+	if (slot != 0)
+		return -EINVAL;
+
+	sp2_read_i2c(s, 0x00, &buf, 1);
+
+	/* disable bypass and enable TS */
+	buf |= (SP2_MOD_CTL_TSOEN | SP2_MOD_CTL_TSIEN);
+	return sp2_write_i2c(s, 0, &buf, 1);
+}
+
+int sp2_ci_poll_slot_status(struct dvb_ca_en50221 *en50221,
+				int slot, int open)
+{
+	struct sp2 *s = en50221->data;
+	u8 buf[2];
+	int ret;
+
+	dev_dbg(&s->client->dev, "slot:%d open:%d\n", slot, open);
+
+	/*
+	 * CAM module INSERT/REMOVE processing. Slow operation because of i2c
+	 * transfers. Throttle read to one per sec.
+	 */
+	if (time_after(jiffies, s->next_status_checked_time)) {
+		ret = sp2_read_i2c(s, 0x00, buf, 1);
+		s->next_status_checked_time = jiffies +	msecs_to_jiffies(1000);
+
+		if (ret)
+			return 0;
+
+		if (buf[0] & SP2_MOD_CTL_DET)
+			s->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
+					DVB_CA_EN50221_POLL_CAM_READY;
+		else
+			s->status = 0;
+	}
+
+	return s->status;
+}
+
+static int sp2_init(struct sp2 *s)
+{
+	int ret = 0;
+	u8 buf;
+	u8 cimax_init[34] = {
+		0x00, /* module A control*/
+		0x00, /* auto select mask high A */
+		0x00, /* auto select mask low A */
+		0x00, /* auto select pattern high A */
+		0x00, /* auto select pattern low A */
+		0x44, /* memory access time A, 600 ns */
+		0x00, /* invert input A */
+		0x00, /* RFU */
+		0x00, /* RFU */
+		0x00, /* module B control*/
+		0x00, /* auto select mask high B */
+		0x00, /* auto select mask low B */
+		0x00, /* auto select pattern high B */
+		0x00, /* auto select pattern low B */
+		0x44, /* memory access time B, 600 ns */
+		0x00, /* invert input B */
+		0x00, /* RFU */
+		0x00, /* RFU */
+		0x00, /* auto select mask high Ext */
+		0x00, /* auto select mask low Ext */
+		0x00, /* auto select pattern high Ext */
+		0x00, /* auto select pattern low Ext */
+		0x00, /* RFU */
+		0x02, /* destination - module A */
+		0x01, /* power control reg, VCC power on */
+		0x00, /* RFU */
+		0x00, /* int status read only */
+		0x00, /* Interrupt Mask Register */
+		0x05, /* EXTINT=active-high, INT=push-pull */
+		0x00, /* USCG1 */
+		0x04, /* ack active low */
+		0x00, /* LOCK = 0 */
+		0x22, /* unknown */
+		0x00, /* synchronization? */
+	};
+
+	dev_dbg(&s->client->dev, "\n");
+
+	s->ca.owner = THIS_MODULE;
+	s->ca.read_attribute_mem = sp2_ci_read_attribute_mem;
+	s->ca.write_attribute_mem = sp2_ci_write_attribute_mem;
+	s->ca.read_cam_control = sp2_ci_read_cam_control;
+	s->ca.write_cam_control = sp2_ci_write_cam_control;
+	s->ca.slot_reset = sp2_ci_slot_reset;
+	s->ca.slot_shutdown = sp2_ci_slot_shutdown;
+	s->ca.slot_ts_enable = sp2_ci_slot_ts_enable;
+	s->ca.poll_slot_status = sp2_ci_poll_slot_status;
+	s->ca.data = s;
+	s->module_access_type = 0;
+
+	/* initialize all regs */
+	ret = sp2_write_i2c(s, 0x00, &cimax_init[0], 34);
+	if (ret)
+		goto err;
+
+	/* lock registers */
+	buf = 1;
+	ret = sp2_write_i2c(s, 0x1f, &buf, 1);
+	if (ret)
+		goto err;
+
+	/* power on slots */
+	ret = sp2_write_i2c(s, 0x18, &buf, 1);
+	if (ret)
+		goto err;
+
+	ret = dvb_ca_en50221_init(s->dvb_adap, &s->ca, 0, 1);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_dbg(&s->client->dev, "init failed=%d\n", ret);
+	return ret;
+}
+
+static int sp2_exit(struct i2c_client *client)
+{
+	struct sp2 *s;
+
+	dev_dbg(&client->dev, "\n");
+
+	if (!client)
+		return 0;
+
+	s = i2c_get_clientdata(client);
+	if (!s)
+		return 0;
+
+	if (!s->ca.data)
+		return 0;
+
+	dvb_ca_en50221_release(&s->ca);
+
+	return 0;
+}
+
+static int sp2_probe(struct i2c_client *client)
+{
+	struct sp2_config *cfg = client->dev.platform_data;
+	struct sp2 *s;
+	int ret;
+
+	dev_dbg(&client->dev, "\n");
+
+	s = kzalloc_obj(*s);
+	if (!s) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	s->client = client;
+	s->dvb_adap = cfg->dvb_adap;
+	s->priv = cfg->priv;
+	s->ci_control = cfg->ci_control;
+
+	i2c_set_clientdata(client, s);
+
+	ret = sp2_init(s);
+	if (ret)
+		goto err;
+
+	dev_info(&s->client->dev, "CIMaX SP2 successfully attached\n");
+	return 0;
+err:
+	dev_dbg(&client->dev, "init failed=%d\n", ret);
+	kfree(s);
+
+	return ret;
+}
+
+static void sp2_remove(struct i2c_client *client)
+{
+	struct sp2 *s = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "\n");
+	sp2_exit(client);
+	kfree(s);
+}
+
+static const struct i2c_device_id sp2_id[] = {
+	{ .name = "sp2" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sp2_id);
+
+static struct i2c_driver sp2_driver = {
+	.driver = {
+		.name	= "sp2",
+	},
+	.probe		= sp2_probe,
+	.remove		= sp2_remove,
+	.id_table	= sp2_id,
+};
+
+module_i2c_driver(sp2_driver);
+
+MODULE_DESCRIPTION("CIMaX SP2/HF CI driver");
+MODULE_AUTHOR("Olli Salonen <olli.salonen@iki.fi>");
+MODULE_LICENSE("GPL");