Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 268 insertions, 0 deletions

diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
new file mode 100644
index 000000000..6abc9302c
--- /dev/null
+++ b/drivers/media/Kconfig
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Multimedia device configuration
+#
+
+#
+# NOTE: CEC and Remote Controller support should not depend on MEDIA_SUPPORT
+#
+source "drivers/media/rc/Kconfig"
+source "drivers/media/cec/Kconfig"
+
+menuconfig MEDIA_SUPPORT
+	tristate "Multimedia support"
+	depends on HAS_IOMEM
+	help
+	  If you want to use media devices, including Webcams, Video grabber
+	  devices and/or TV devices, V4L2 codecs, etc, enable this option
+	  and other options below.
+
+	  Additional info and docs are available on the web at
+	  <https://linuxtv.org>
+
+if MEDIA_SUPPORT
+
+config MEDIA_SUPPORT_FILTER
+	bool "Filter media drivers"
+	default y if !EXPERT
+	help
+	   Configuring the media subsystem can be complex, as there are
+	   hundreds of drivers and other config options.
+
+	   This menu offers option that will help the Kernel's config
+	   system to hide drivers that are out of the scope of the
+	   user needs, and disabling core support for unused APIs.
+
+	   If not selected, all non-optional media core functionality
+	   needed to support media drivers will be enabled. Also, all
+	   media device drivers should be shown.
+
+config MEDIA_SUBDRV_AUTOSELECT
+	bool "Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)"
+	depends on HAS_IOMEM
+	select I2C
+	select I2C_MUX
+	default y if MEDIA_SUPPORT_FILTER
+	help
+	  By default, a media driver auto-selects all possible ancillary
+	  devices such as tuners, sensors, video encoders/decoders and
+	  frontends, that are used by any of the supported devices.
+
+	  This is generally the right thing to do, except when there
+	  are strict constraints with regards to the kernel size,
+	  like on embedded systems.
+
+	  Use this option with care, as deselecting ancillary drivers which
+	  are, in fact, necessary will result in the lack of the needed
+	  functionality for your device (it may not tune or may not have
+	  the needed demodulators).
+
+	  If unsure say Y.
+
+menu "Media device types"
+
+#
+# Multimedia support - automatically enable V4L2 and DVB core
+#
+config MEDIA_CAMERA_SUPPORT
+	bool
+	prompt "Cameras and video grabbers" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable support for webcams and video grabbers.
+
+	  Say Y when you have a webcam or a video capture grabber board.
+
+config MEDIA_ANALOG_TV_SUPPORT
+	bool
+	prompt "Analog TV" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable analog TV support.
+
+	  Say Y when you have a TV board with analog support or with a
+	  hybrid analog/digital TV chipset.
+
+	  Note: There are several DVB cards that are based on chips that
+		support both analog and digital TV. Disabling this option
+		will disable support for them.
+
+config MEDIA_DIGITAL_TV_SUPPORT
+	bool
+	prompt "Digital TV" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable digital TV support.
+
+	  Say Y when you have a board with digital support or a board with
+	  hybrid digital TV and analog TV.
+
+config MEDIA_RADIO_SUPPORT
+	bool
+	prompt "AM/FM radio receivers/transmitters" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable AM/FM radio support.
+
+	  Additional info and docs are available on the web at
+	  <https://linuxtv.org>
+
+	  Say Y when you have a board with radio support.
+
+	  Note: There are several TV cards that are based on chips that
+		support radio reception. Disabling this option will
+		disable support for them.
+
+config MEDIA_SDR_SUPPORT
+	bool
+	prompt "Software defined radio" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable software defined radio support.
+
+	  Say Y when you have a software defined radio device.
+
+config MEDIA_PLATFORM_SUPPORT
+	bool
+	prompt "Platform-specific devices" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable support for complex cameras, codecs, and other hardware
+	  that are integrated at the CPU, GPU or on Image Signalling Processor
+	  and don't use PCI, USB or Firewire buses.
+
+	  This is found on Embedded hardware (SoC), on V4L2 codecs and
+	  on some GPU and newer CPU chipsets.
+
+	  Say Y when you want to be able to see such devices.
+
+config MEDIA_TEST_SUPPORT
+	bool
+	prompt "Test drivers" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  These drivers should not be used on production kernels, but
+	  can be useful on debug ones. This option enables several dummy drivers
+	  that simulate real hardware. Very useful to test userspace
+	  applications and to validate if the subsystem core doesn't
+	  have regressions.
+
+	  Say Y if you want to use some virtual test driver.
+
+	  In case of doubts, say N.
+	  Say Y when you have a software defined radio device.
+endmenu # media device types
+
+
+menu "Media core support"
+	visible if !MEDIA_SUPPORT_FILTER
+
+config VIDEO_DEV
+	tristate "Video4Linux core"
+	default MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT || MEDIA_PLATFORM_SUPPORT || MEDIA_TEST_SUPPORT
+	depends on (I2C || I2C=n)
+	select RATIONAL
+	select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
+	help
+	  Enables the V4L2 API, used by cameras, analog TV, video grabbers,
+	  radio devices and by some input devices.
+
+config MEDIA_CONTROLLER
+	bool "Media Controller API"
+	default MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_PLATFORM_SUPPORT
+	help
+	  Enable the media controller API used to query media devices internal
+	  topology and configure it dynamically.
+
+	  This API is mostly used by camera interfaces in embedded platforms.
+
+#
+# DVB Core
+#	Only enables if one of DTV is selected
+#
+
+config DVB_CORE
+	tristate "DVB Core"
+	depends on MEDIA_DIGITAL_TV_SUPPORT
+	depends on (I2C || I2C=n)
+	default MEDIA_DIGITAL_TV_SUPPORT
+	select CRC32
+	help
+	  Enables the DVB API, used by Digital TV devices. Supports several
+	  standards, including DVB, ATSC, ISDB and CMDB.
+
+endmenu # Media core support
+
+#
+# Extra per-media API core functionality
+
+menu "Video4Linux options"
+	visible if VIDEO_DEV
+
+source "drivers/media/v4l2-core/Kconfig"
+endmenu
+
+menu "Media controller options"
+	visible if MEDIA_CONTROLLER
+
+source "drivers/media/mc/Kconfig"
+endmenu
+
+menu "Digital TV options"
+	visible if DVB_CORE
+
+source "drivers/media/dvb-core/Kconfig"
+endmenu
+
+menu "Media drivers"
+
+comment "Drivers filtered as selected at 'Filter media drivers'"
+	depends on MEDIA_SUPPORT_FILTER
+
+comment "Media drivers"
+
+source "drivers/media/usb/Kconfig"
+source "drivers/media/pci/Kconfig"
+source "drivers/media/radio/Kconfig"
+
+if MEDIA_PLATFORM_SUPPORT
+source "drivers/media/platform/Kconfig"
+source "drivers/media/mmc/Kconfig"
+endif
+
+if MEDIA_TEST_SUPPORT
+source "drivers/media/test-drivers/Kconfig"
+endif
+
+source "drivers/media/firewire/Kconfig"
+
+# Common driver options
+source "drivers/media/common/Kconfig"
+
+endmenu
+
+#
+# Ancillary drivers (tuners, i2c, spi, frontends)
+#
+
+config MEDIA_HIDE_ANCILLARY_SUBDRV
+	bool
+	depends on MEDIA_SUBDRV_AUTOSELECT && !COMPILE_TEST && !EXPERT
+	default y
+
+menu "Media ancillary drivers"
+
+config MEDIA_ATTACH
+	bool
+	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
+	depends on MODULES
+	default MODULES
+
+source "drivers/media/i2c/Kconfig"
+source "drivers/media/spi/Kconfig"
+source "drivers/media/tuners/Kconfig"
+source "drivers/media/dvb-frontends/Kconfig"
+
+endmenu
+
+endif # MEDIA_SUPPORT