Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 268 insertions, 0 deletions

diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
new file mode 100644
index 000000000..6abc9302c
--- /dev/null
+++ b/drivers/media/Kconfig
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Multimedia device configuration
+#
+
+#
+# NOTE: CEC and Remote Controller support should not depend on MEDIA_SUPPORT
+#
+source "drivers/media/rc/Kconfig"
+source "drivers/media/cec/Kconfig"
+
+menuconfig MEDIA_SUPPORT
+	tristate "Multimedia support"
+	depends on HAS_IOMEM
+	help
+	  If you want to use media devices, including Webcams, Video grabber
+	  devices and/or TV devices, V4L2 codecs, etc, enable this option
+	  and other options below.
+
+	  Additional info and docs are available on the web at
+	  <https://linuxtv.org>
+
+if MEDIA_SUPPORT
+
+config MEDIA_SUPPORT_FILTER
+	bool "Filter media drivers"
+	default y if !EXPERT
+	help
+	   Configuring the media subsystem can be complex, as there are
+	   hundreds of drivers and other config options.
+
+	   This menu offers option that will help the Kernel's config
+	   system to hide drivers that are out of the scope of the
+	   user needs, and disabling core support for unused APIs.
+
+	   If not selected, all non-optional media core functionality
+	   needed to support media drivers will be enabled. Also, all
+	   media device drivers should be shown.
+
+config MEDIA_SUBDRV_AUTOSELECT
+	bool "Autoselect ancillary drivers (tuners, sensors, i2c, spi, frontends)"
+	depends on HAS_IOMEM
+	select I2C
+	select I2C_MUX
+	default y if MEDIA_SUPPORT_FILTER
+	help
+	  By default, a media driver auto-selects all possible ancillary
+	  devices such as tuners, sensors, video encoders/decoders and
+	  frontends, that are used by any of the supported devices.
+
+	  This is generally the right thing to do, except when there
+	  are strict constraints with regards to the kernel size,
+	  like on embedded systems.
+
+	  Use this option with care, as deselecting ancillary drivers which
+	  are, in fact, necessary will result in the lack of the needed
+	  functionality for your device (it may not tune or may not have
+	  the needed demodulators).
+
+	  If unsure say Y.
+
+menu "Media device types"
+
+#
+# Multimedia support - automatically enable V4L2 and DVB core
+#
+config MEDIA_CAMERA_SUPPORT
+	bool
+	prompt "Cameras and video grabbers" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable support for webcams and video grabbers.
+
+	  Say Y when you have a webcam or a video capture grabber board.
+
+config MEDIA_ANALOG_TV_SUPPORT
+	bool
+	prompt "Analog TV" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable analog TV support.
+
+	  Say Y when you have a TV board with analog support or with a
+	  hybrid analog/digital TV chipset.
+
+	  Note: There are several DVB cards that are based on chips that
+		support both analog and digital TV. Disabling this option
+		will disable support for them.
+
+config MEDIA_DIGITAL_TV_SUPPORT
+	bool
+	prompt "Digital TV" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable digital TV support.
+
+	  Say Y when you have a board with digital support or a board with
+	  hybrid digital TV and analog TV.
+
+config MEDIA_RADIO_SUPPORT
+	bool
+	prompt "AM/FM radio receivers/transmitters" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable AM/FM radio support.
+
+	  Additional info and docs are available on the web at
+	  <https://linuxtv.org>
+
+	  Say Y when you have a board with radio support.
+
+	  Note: There are several TV cards that are based on chips that
+		support radio reception. Disabling this option will
+		disable support for them.
+
+config MEDIA_SDR_SUPPORT
+	bool
+	prompt "Software defined radio" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable software defined radio support.
+
+	  Say Y when you have a software defined radio device.
+
+config MEDIA_PLATFORM_SUPPORT
+	bool
+	prompt "Platform-specific devices" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  Enable support for complex cameras, codecs, and other hardware
+	  that are integrated at the CPU, GPU or on Image Signalling Processor
+	  and don't use PCI, USB or Firewire buses.
+
+	  This is found on Embedded hardware (SoC), on V4L2 codecs and
+	  on some GPU and newer CPU chipsets.
+
+	  Say Y when you want to be able to see such devices.
+
+config MEDIA_TEST_SUPPORT
+	bool
+	prompt "Test drivers" if MEDIA_SUPPORT_FILTER
+	default y if !MEDIA_SUPPORT_FILTER
+	help
+	  These drivers should not be used on production kernels, but
+	  can be useful on debug ones. This option enables several dummy drivers
+	  that simulate real hardware. Very useful to test userspace
+	  applications and to validate if the subsystem core doesn't
+	  have regressions.
+
+	  Say Y if you want to use some virtual test driver.
+
+	  In case of doubts, say N.
+	  Say Y when you have a software defined radio device.
+endmenu # media device types
+
+
+menu "Media core support"
+	visible if !MEDIA_SUPPORT_FILTER
+
+config VIDEO_DEV
+	tristate "Video4Linux core"
+	default MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT || MEDIA_PLATFORM_SUPPORT || MEDIA_TEST_SUPPORT
+	depends on (I2C || I2C=n)
+	select RATIONAL
+	select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
+	help
+	  Enables the V4L2 API, used by cameras, analog TV, video grabbers,
+	  radio devices and by some input devices.
+
+config MEDIA_CONTROLLER
+	bool "Media Controller API"
+	default MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_PLATFORM_SUPPORT
+	help
+	  Enable the media controller API used to query media devices internal
+	  topology and configure it dynamically.
+
+	  This API is mostly used by camera interfaces in embedded platforms.
+
+#
+# DVB Core
+#	Only enables if one of DTV is selected
+#
+
+config DVB_CORE
+	tristate "DVB Core"
+	depends on MEDIA_DIGITAL_TV_SUPPORT
+	depends on (I2C || I2C=n)
+	default MEDIA_DIGITAL_TV_SUPPORT
+	select CRC32
+	help
+	  Enables the DVB API, used by Digital TV devices. Supports several
+	  standards, including DVB, ATSC, ISDB and CMDB.
+
+endmenu # Media core support
+
+#
+# Extra per-media API core functionality
+
+menu "Video4Linux options"
+	visible if VIDEO_DEV
+
+source "drivers/media/v4l2-core/Kconfig"
+endmenu
+
+menu "Media controller options"
+	visible if MEDIA_CONTROLLER
+
+source "drivers/media/mc/Kconfig"
+endmenu
+
+menu "Digital TV options"
+	visible if DVB_CORE
+
+source "drivers/media/dvb-core/Kconfig"
+endmenu
+
+menu "Media drivers"
+
+comment "Drivers filtered as selected at 'Filter media drivers'"
+	depends on MEDIA_SUPPORT_FILTER
+
+comment "Media drivers"
+
+source "drivers/media/usb/Kconfig"
+source "drivers/media/pci/Kconfig"
+source "drivers/media/radio/Kconfig"
+
+if MEDIA_PLATFORM_SUPPORT
+source "drivers/media/platform/Kconfig"
+source "drivers/media/mmc/Kconfig"
+endif
+
+if MEDIA_TEST_SUPPORT
+source "drivers/media/test-drivers/Kconfig"
+endif
+
+source "drivers/media/firewire/Kconfig"
+
+# Common driver options
+source "drivers/media/common/Kconfig"
+
+endmenu
+
+#
+# Ancillary drivers (tuners, i2c, spi, frontends)
+#
+
+config MEDIA_HIDE_ANCILLARY_SUBDRV
+	bool
+	depends on MEDIA_SUBDRV_AUTOSELECT && !COMPILE_TEST && !EXPERT
+	default y
+
+menu "Media ancillary drivers"
+
+config MEDIA_ATTACH
+	bool
+	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
+	depends on MODULES
+	default MODULES
+
+source "drivers/media/i2c/Kconfig"
+source "drivers/media/spi/Kconfig"
+source "drivers/media/tuners/Kconfig"
+source "drivers/media/dvb-frontends/Kconfig"
+
+endmenu
+
+endif # MEDIA_SUPPORT