Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 179 insertions, 0 deletions

diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
new file mode 100644
index 000000000..ec79d87fb
--- /dev/null
+++ b/drivers/md/raid10.h
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _RAID10_H
+#define _RAID10_H
+
+/* Note: raid10_info.rdev can be set to NULL asynchronously by
+ * raid10_remove_disk.
+ * There are three safe ways to access raid10_info.rdev.
+ * 1/ when holding mddev->reconfig_mutex
+ * 2/ when resync/recovery/reshape is known to be happening - i.e. in code
+ *    that is called as part of performing resync/recovery/reshape.
+ * 3/ while holding rcu_read_lock(), use rcu_dereference to get the pointer
+ *    and if it is non-NULL, increment rdev->nr_pending before dropping the
+ *    RCU lock.
+ * When .rdev is set to NULL, the nr_pending count checked again and if it has
+ * been incremented, the pointer is put back in .rdev.
+ */
+
+struct raid10_info {
+	struct md_rdev	*rdev, *replacement;
+	sector_t	head_position;
+};
+
+struct r10conf {
+	struct mddev		*mddev;
+	struct raid10_info	*mirrors;
+	struct raid10_info	*mirrors_new, *mirrors_old;
+	spinlock_t		device_lock;
+
+	/* geometry */
+	struct geom {
+		int		raid_disks;
+		int		near_copies;  /* number of copies laid out
+					       * raid0 style */
+		int		far_copies;   /* number of copies laid out
+					       * at large strides across drives
+					       */
+		int		far_offset;   /* far_copies are offset by 1
+					       * stripe instead of many
+					       */
+		sector_t	stride;	      /* distance between far copies.
+					       * This is size / far_copies unless
+					       * far_offset, in which case it is
+					       * 1 stripe.
+					       */
+		int             far_set_size; /* The number of devices in a set,
+					       * where a 'set' are devices that
+					       * contain far/offset copies of
+					       * each other.
+					       */
+		int		chunk_shift; /* shift from chunks to sectors */
+		sector_t	chunk_mask;
+	} prev, geo;
+	int			copies;	      /* near_copies * far_copies.
+					       * must be <= raid_disks
+					       */
+
+	sector_t		dev_sectors;  /* temp copy of
+					       * mddev->dev_sectors */
+	sector_t		reshape_progress;
+	sector_t		reshape_safe;
+	unsigned long		reshape_checkpoint;
+	sector_t		offset_diff;
+
+	struct list_head	retry_list;
+	/* A separate list of r1bio which just need raid_end_bio_io called.
+	 * This mustn't happen for writes which had any errors if the superblock
+	 * needs to be written.
+	 */
+	struct list_head	bio_end_io_list;
+
+	/* queue pending writes and submit them on unplug */
+	struct bio_list		pending_bio_list;
+
+	seqlock_t		resync_lock;
+	atomic_t		nr_pending;
+	int			nr_waiting;
+	int			nr_queued;
+	int			barrier;
+	int			array_freeze_pending;
+	sector_t		next_resync;
+	int			fullsync;  /* set to 1 if a full sync is needed,
+					    * (fresh device added).
+					    * Cleared when a sync completes.
+					    */
+	int			have_replacement; /* There is at least one
+						   * replacement device.
+						   */
+	wait_queue_head_t	wait_barrier;
+
+	mempool_t		r10bio_pool;
+	mempool_t		r10buf_pool;
+	struct page		*tmppage;
+	struct bio_set		bio_split;
+
+	/* When taking over an array from a different personality, we store
+	 * the new thread here until we fully activate the array.
+	 */
+	struct md_thread __rcu	*thread;
+
+	/*
+	 * Keep track of cluster resync window to send to other nodes.
+	 */
+	sector_t		cluster_sync_low;
+	sector_t		cluster_sync_high;
+};
+
+/*
+ * this is our 'private' RAID10 bio.
+ *
+ * it contains information about what kind of IO operations were started
+ * for this RAID10 operation, and about their status:
+ */
+
+struct r10bio {
+	atomic_t		remaining; /* 'have we finished' count,
+					    * used from IRQ handlers
+					    */
+	sector_t		sector;	/* virtual sector number */
+	int			sectors;
+	unsigned long		state;
+	struct mddev		*mddev;
+	/*
+	 * original bio going to /dev/mdx
+	 */
+	struct bio		*master_bio;
+	/*
+	 * if the IO is in READ direction, then this is where we read
+	 */
+	int			read_slot;
+
+	struct list_head	retry_list;
+	/*
+	 * if the IO is in WRITE direction, then multiple bios are used,
+	 * one for each copy.
+	 * When resyncing we also use one for each copy.
+	 * When reconstructing, we use 2 bios, one for read, one for write.
+	 * We choose the number when they are allocated.
+	 * We sometimes need an extra bio to write to the replacement.
+	 */
+	struct r10dev {
+		struct bio	*bio;
+		union {
+			struct bio	*repl_bio; /* used for resync and
+						    * writes */
+			struct md_rdev	*rdev;	   /* used for reads
+						    * (read_slot >= 0) */
+		};
+		sector_t	addr;
+		int		devnum;
+	} devs[];
+};
+
+/* bits for r10bio.state */
+enum r10bio_state {
+	R10BIO_Uptodate,
+	R10BIO_IsSync,
+	R10BIO_IsRecover,
+	R10BIO_IsReshape,
+/* Set ReadError on bios that experience a read error
+ * so that raid10d knows what to do with them.
+ */
+	R10BIO_ReadError,
+/* For bio_split errors, record that bi_end_io was called. */
+	R10BIO_Returned,
+/* If a write for this request means we can clear some
+ * known-bad-block records, we set this flag.
+ */
+	R10BIO_MadeGood,
+	R10BIO_WriteError,
+/* During a reshape we might be performing IO on the
+ * 'previous' part of the array, in which case this
+ * flag is set
+ */
+	R10BIO_Previous,
+/* failfast devices did receive failfast requests. */
+	R10BIO_FailFast,
+	R10BIO_Discard,
+};
+#endif