Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Fix error output of boot instance creation failure

   Currently if a boot instance creation fails, instead of printing out
   the name of the instance that failed, it prints "(null)". That is
   because it prints "cur_str" that had already been processed by
   strsep(). Print the saved name instead.

   While at it, print the error code of the failure.

 - Fix use-after-free for same named historgrams

   Histograms can be named so that they can be used in multiple events.
   But if the named histogram has a variable attached, the second event
   that uses the named histogram which duplicates it and needs to free
   the original after duplication leaves the old variable in place and
   still visible. If another histogram uses than variable, it will use
   the stale one which will try to reference the freed duplicate
   histogram and crash the kernel.

   Free the duplicate variables along with the duplicated histogram
   data.

 - Check return value of kthread_run() in event self test

   The events self tests uses a kthread for testing but does not check
   if it succeeded in creating a kthread. If the kthread creation were
   to fail, the code will still try to call kthread_stop() on the error
   returned.

 - Fix race between reading trace_pipe and updating subbuffer size

   If a user is reading the trace_pipe file at the same time they update
   the ring buffer sub-buffer size, can cause the trace_pipe read to
   read stale data. Add trace_access_lock() around updating the ring
   buffer sub-buffer size.

 - Fix eventfs_inode on failure path in creation of the events directory

   In the creation of the "events" directory, if after allocating the
   eventfs_inode a failure is detected, it calls cleanup_ei() which
   calls free_ei(). The free_ei() will test if eventfs_inode being freed
   has no children. It is a bug if it does. But on the failure case of
   the creation of the "events" directory, the children lists have not
   yet been initialized and the free will trigger a warning because
   list_empty() on an uninitialized list returns false.

   Move the initialization into init_ei() where it makes more sense and
   makes sure that a created eventfs_inode has its lists initialized
   upon creation.

 - Check return value of kthread_run() in ftrace direct sample code

   The sample code that shows how to use the ftrace direct calls does
   not test the return of kthread_run() to see if it succeeds. Return a
   failure if the kthread_run() doesn't succeed.

 - Clear user events state on fork in case of alloc failure

   On fork, the child gets a pointer to the parent's user events state.
   It makes a copy of it then updates the child's pointer to it. But if
   the allocation fails, the duplication function leaves the child with
   a pointer to its parent's descriptor. When the child cleans up its
   data, it will free the parent's descriptor while the parent is still
   using it.

   In the duplication function, set the child's user_event_mm to NULL
   before testing if the allocation succeeded, and when it exits it will
   not free the parent's descriptor.

 - Fix retry exhaustion in simple ring buffer reader swap

   simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
   post-decrements it only after a failed link replacement. On the final
   attempt, a successful replacement leaves retry at zero, while a
   failed replacement leaves it at -1.

   But the check for success expects the retry value to be non-zero and
   exits with an error on zero. This is the opposite result. Fix it.

 - Fail nicely when the remote swap_reader_page() returns an error

   Currently, if the swap_reader_page() of a remote buffer fails, it
   triggers a WARN_ON_ONCE() and continues normally. Instead, have it
   exit with an error and a pr_warn() print instead of a full WARNING.

* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Stop remote reader update when page swap fails
  tracing: Fix retry exhaustion in simple ring buffer reader swap
  tracing/user_events: Clear copied tracing state before fork duplication
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
  eventfs: Initialize ei->children and ei->list in init_ei()
  tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
  tracing: Fix crash passing ERR_PTR to kthread_stop()
  tracing: Fix use-after-free with same-name named triggers
  tracing: Fix logged instance name on creation failure

1 files changed, 194 insertions, 0 deletions

diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
new file mode 100644
index 000000000..c98d43a7a
--- /dev/null
+++ b/drivers/md/raid1.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _RAID1_H
+#define _RAID1_H
+
+/*
+ * each barrier unit size is 64MB fow now
+ * note: it must be larger than RESYNC_DEPTH
+ */
+#define BARRIER_UNIT_SECTOR_BITS	17
+#define BARRIER_UNIT_SECTOR_SIZE	(1<<17)
+/*
+ * In struct r1conf, the following members are related to I/O barrier
+ * buckets,
+ *	atomic_t	*nr_pending;
+ *	atomic_t	*nr_waiting;
+ *	atomic_t	*nr_queued;
+ *	atomic_t	*barrier;
+ * Each of them points to array of atomic_t variables, each array is
+ * designed to have BARRIER_BUCKETS_NR elements and occupy a single
+ * memory page. The data width of atomic_t variables is 4 bytes, equal
+ * to 1<<(ilog2(sizeof(atomic_t))), BARRIER_BUCKETS_NR_BITS is defined
+ * as (PAGE_SHIFT - ilog2(sizeof(int))) to make sure an array of
+ * atomic_t variables with BARRIER_BUCKETS_NR elements just exactly
+ * occupies a single memory page.
+ */
+#define BARRIER_BUCKETS_NR_BITS		(PAGE_SHIFT - ilog2(sizeof(atomic_t)))
+#define BARRIER_BUCKETS_NR		(1<<BARRIER_BUCKETS_NR_BITS)
+
+/* Note: raid1_info.rdev can be set to NULL asynchronously by raid1_remove_disk.
+ * There are three safe ways to access raid1_info.rdev.
+ * 1/ when holding mddev->reconfig_mutex
+ * 2/ when resync/recovery is known to be happening - i.e. in code that is
+ *    called as part of performing resync/recovery.
+ * 3/ while holding rcu_read_lock(), use rcu_dereference to get the pointer
+ *    and if it is non-NULL, increment rdev->nr_pending before dropping the
+ *    RCU lock.
+ * When .rdev is set to NULL, the nr_pending count checked again and if it has
+ * been incremented, the pointer is put back in .rdev.
+ */
+
+struct raid1_info {
+	struct md_rdev	*rdev;
+	sector_t	head_position;
+
+	/* When choose the best device for a read (read_balance())
+	 * we try to keep sequential reads one the same device
+	 */
+	sector_t	next_seq_sect;
+	sector_t	seq_start;
+};
+
+struct r1conf {
+	struct mddev		*mddev;
+	struct raid1_info	*mirrors;	/* twice 'raid_disks' to
+						 * allow for replacements.
+						 */
+	int			raid_disks;
+	int			nonrot_disks;
+
+	spinlock_t		device_lock;
+
+	/* list of 'struct r1bio' that need to be processed by raid1d,
+	 * whether to retry a read, writeout a resync or recovery
+	 * block, or anything else.
+	 */
+	struct list_head	retry_list;
+	/* A separate list of r1bio which just need raid_end_bio_io called.
+	 * This mustn't happen for writes which had any errors if the superblock
+	 * needs to be written.
+	 */
+	struct list_head	bio_end_io_list;
+
+	/* queue pending writes to be submitted on unplug */
+	struct bio_list		pending_bio_list;
+
+	/* for use when syncing mirrors:
+	 * We don't allow both normal IO and resync/recovery IO at
+	 * the same time - resync/recovery can only happen when there
+	 * is no other IO.  So when either is active, the other has to wait.
+	 * See more details description in raid1.c near raise_barrier().
+	 */
+	wait_queue_head_t	wait_barrier;
+	spinlock_t		resync_lock;
+	atomic_t		nr_sync_pending;
+	atomic_t		*nr_pending;
+	atomic_t		*nr_waiting;
+	atomic_t		*nr_queued;
+	atomic_t		*barrier;
+	int			array_frozen;
+
+	/* Set to 1 if a full sync is needed, (fresh device added).
+	 * Cleared when a sync completes.
+	 */
+	int			fullsync;
+
+	mempool_t		*r1bio_pool;
+	mempool_t		r1buf_pool;
+
+	struct bio_set		bio_split;
+
+	/* temporary buffer to synchronous IO when attempting to repair
+	 * a read error.
+	 */
+	struct page		*tmppage;
+
+	/* When taking over an array from a different personality, we store
+	 * the new thread here until we fully activate the array.
+	 */
+	struct md_thread __rcu	*thread;
+
+	/* Keep track of cluster resync window to send to other
+	 * nodes.
+	 */
+	sector_t		cluster_sync_low;
+	sector_t		cluster_sync_high;
+
+};
+
+/*
+ * this is our 'private' RAID1 bio.
+ *
+ * it contains information about what kind of IO operations were started
+ * for this RAID1 operation, and about their status:
+ */
+
+struct r1bio {
+	atomic_t		remaining; /* 'have we finished' count,
+					    * used from IRQ handlers
+					    */
+	atomic_t		behind_remaining; /* number of write-behind ios remaining
+						 * in this BehindIO request
+						 */
+	sector_t		sector;
+	int			sectors;
+	unsigned long		state;
+	struct mddev		*mddev;
+	/*
+	 * original bio going to /dev/mdx
+	 */
+	struct bio		*master_bio;
+	/*
+	 * if the IO is in READ direction, then this is where we read
+	 */
+	int			read_disk;
+
+	struct list_head	retry_list;
+
+	/*
+	 * When R1BIO_BehindIO is set, we store pages for write behind
+	 * in behind_master_bio.
+	 */
+	struct bio		*behind_master_bio;
+
+	/*
+	 * if the IO is in WRITE direction, then multiple bios are used.
+	 * We choose the number when they are allocated.
+	 */
+	struct bio		*bios[];
+	/* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/
+};
+
+/* bits for r1bio.state */
+enum r1bio_state {
+	R1BIO_Uptodate,
+	R1BIO_IsSync,
+	R1BIO_BehindIO,
+/* Set ReadError on bios that experience a readerror so that
+ * raid1d knows what to do with them.
+ */
+	R1BIO_ReadError,
+/* For write-behind requests, we call bi_end_io when
+ * the last non-write-behind device completes, providing
+ * any write was successful.  Otherwise we call when
+ * any write-behind write succeeds, otherwise we call
+ * with failure when last write completes (and all failed).
+ *
+ * And for bio_split errors, record that bi_end_io was called
+ * with this flag...
+ */
+	R1BIO_Returned,
+/* If a write for this request means we can clear some
+ * known-bad-block records, we set this flag
+ */
+	R1BIO_MadeGood,
+	R1BIO_WriteError,
+	R1BIO_FailFast,
+};
+
+static inline int sector_to_idx(sector_t sector)
+{
+	return hash_long(sector >> BARRIER_UNIT_SECTOR_BITS,
+			 BARRIER_BUCKETS_NR_BITS);
+}
+#endif