ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 283 insertions, 0 deletions

diff --git a/drivers/md/md-autodetect.c b/drivers/md/md-autodetect.c
new file mode 100644
index 000000000..4b80165af
--- /dev/null
+++ b/drivers/md/md-autodetect.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/init.h>
+#include <linux/mount.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/init_syscalls.h>
+#include <linux/raid/detect.h>
+#include <linux/raid/md_u.h>
+#include <linux/raid/md_p.h>
+#include "md.h"
+
+/*
+ * When md (and any require personalities) are compiled into the kernel
+ * (not a module), arrays can be assembles are boot time using with AUTODETECT
+ * where specially marked partitions are registered with md_autodetect_dev(),
+ * and with MD_BOOT where devices to be collected are given on the boot line
+ * with md=.....
+ * The code for that is here.
+ */
+
+#ifdef CONFIG_MD_AUTODETECT
+static int __initdata raid_noautodetect;
+#else
+static int __initdata raid_noautodetect=1;
+#endif
+static int __initdata raid_autopart;
+
+static struct md_setup_args {
+	int minor;
+	int partitioned;
+	int level;
+	int chunk;
+	char *device_names;
+} md_setup_args[256] __initdata;
+
+static int md_setup_ents __initdata;
+
+/*
+ * Parse the command-line parameters given our kernel, but do not
+ * actually try to invoke the MD device now; that is handled by
+ * md_setup_drive after the low-level disk drivers have initialised.
+ *
+ * 27/11/1999: Fixed to work correctly with the 2.3 kernel (which
+ *             assigns the task of parsing integer arguments to the
+ *             invoked program now).  Added ability to initialise all
+ *             the MD devices (by specifying multiple "md=" lines)
+ *             instead of just one.  -- KTK
+ * 18May2000: Added support for persistent-superblock arrays:
+ *             md=n,0,factor,fault,device-list   uses RAID0 for device n
+ *             md=n,-1,factor,fault,device-list  uses LINEAR for device n
+ *             md=n,device-list      reads a RAID superblock from the devices
+ *             elements in device-list are read by name_to_kdev_t so can be
+ *             a hex number or something like /dev/hda1 /dev/sdb
+ * 2001-06-03: Dave Cinege <dcinege@psychosis.com>
+ *		Shifted name_to_kdev_t() and related operations to md_set_drive()
+ *		for later execution. Rewrote section to make devfs compatible.
+ */
+static int __init md_setup(char *str)
+{
+	int minor, level, factor, fault, partitioned = 0;
+	char *pername = "";
+	char *str1;
+	int ent;
+
+	if (*str == 'd') {
+		partitioned = 1;
+		str++;
+	}
+	if (get_option(&str, &minor) != 2) {	/* MD Number */
+		printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
+		return 0;
+	}
+	str1 = str;
+	for (ent=0 ; ent< md_setup_ents ; ent++)
+		if (md_setup_args[ent].minor == minor &&
+		    md_setup_args[ent].partitioned == partitioned) {
+			printk(KERN_WARNING "md: md=%s%d, Specified more than once. "
+			       "Replacing previous definition.\n", partitioned?"d":"", minor);
+			break;
+		}
+	if (ent >= ARRAY_SIZE(md_setup_args)) {
+		printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor);
+		return 0;
+	}
+	if (ent >= md_setup_ents)
+		md_setup_ents++;
+	switch (get_option(&str, &level)) {	/* RAID level */
+	case 2: /* could be 0 or -1.. */
+		if (level == 0 || level == LEVEL_LINEAR) {
+			if (get_option(&str, &factor) != 2 ||	/* Chunk Size */
+					get_option(&str, &fault) != 2) {
+				printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
+				return 0;
+			}
+			md_setup_args[ent].level = level;
+			md_setup_args[ent].chunk = 1 << (factor+12);
+			if (level ==  LEVEL_LINEAR)
+				pername = "linear";
+			else
+				pername = "raid0";
+			break;
+		}
+		fallthrough;
+	case 1: /* the first device is numeric */
+		str = str1;
+		fallthrough;
+	case 0:
+		md_setup_args[ent].level = LEVEL_NONE;
+		pername="super-block";
+	}
+
+	printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
+		minor, pername, str);
+	md_setup_args[ent].device_names = str;
+	md_setup_args[ent].partitioned = partitioned;
+	md_setup_args[ent].minor = minor;
+
+	return 1;
+}
+
+static void __init md_setup_drive(struct md_setup_args *args)
+{
+	char *devname = args->device_names;
+	dev_t devices[MD_SB_DISKS + 1], mdev;
+	struct mdu_array_info_s ainfo = { };
+	struct mddev *mddev;
+	int err = 0, i;
+	char name[16];
+
+	if (args->partitioned) {
+		mdev = MKDEV(mdp_major, args->minor << MdpMinorShift);
+		sprintf(name, "md_d%d", args->minor);
+	} else {
+		mdev = MKDEV(MD_MAJOR, args->minor);
+		sprintf(name, "md%d", args->minor);
+	}
+
+	for (i = 0; i < MD_SB_DISKS && devname != NULL; i++) {
+		struct kstat stat;
+		char *p;
+		char comp_name[64];
+		dev_t dev;
+
+		p = strchr(devname, ',');
+		if (p)
+			*p++ = 0;
+
+		if (early_lookup_bdev(devname, &dev))
+			dev = 0;
+		if (strncmp(devname, "/dev/", 5) == 0)
+			devname += 5;
+		snprintf(comp_name, 63, "/dev/%s", devname);
+		if (init_stat(comp_name, &stat, 0) == 0 && S_ISBLK(stat.mode))
+			dev = new_decode_dev(stat.rdev);
+		if (!dev) {
+			pr_warn("md: Unknown device name: %s\n", devname);
+			break;
+		}
+
+		devices[i] = dev;
+		devname = p;
+	}
+	devices[i] = 0;
+
+	if (!i)
+		return;
+
+	pr_info("md: Loading %s: %s\n", name, args->device_names);
+
+	mddev = md_alloc(mdev, name);
+	if (IS_ERR(mddev)) {
+		pr_err("md: md_alloc failed - cannot start array %s\n", name);
+		return;
+	}
+
+	err = mddev_suspend_and_lock(mddev);
+	if (err) {
+		pr_err("md: failed to lock array %s\n", name);
+		goto out_mddev_put;
+	}
+
+	if (!list_empty(&mddev->disks) || mddev->raid_disks) {
+		pr_warn("md: Ignoring %s, already autodetected. (Use raid=noautodetect)\n",
+		       name);
+		goto out_unlock;
+	}
+
+	if (args->level != LEVEL_NONE) {
+		/* non-persistent */
+		ainfo.level = args->level;
+		ainfo.md_minor = args->minor;
+		ainfo.not_persistent = 1;
+		ainfo.state = (1 << MD_SB_CLEAN);
+		ainfo.chunk_size = args->chunk;
+		while (devices[ainfo.raid_disks])
+			ainfo.raid_disks++;
+	}
+
+	err = md_set_array_info(mddev, &ainfo);
+
+	for (i = 0; i <= MD_SB_DISKS && devices[i]; i++) {
+		struct mdu_disk_info_s dinfo = {
+			.major	= MAJOR(devices[i]),
+			.minor	= MINOR(devices[i]),
+		};
+
+		if (args->level != LEVEL_NONE) {
+			dinfo.number = i;
+			dinfo.raid_disk = i;
+			dinfo.state =
+				(1 << MD_DISK_ACTIVE) | (1 << MD_DISK_SYNC);
+		}
+
+		md_add_new_disk(mddev, &dinfo);
+	}
+
+	if (!err)
+		err = do_md_run(mddev);
+	if (err)
+		pr_warn("md: starting %s failed\n", name);
+out_unlock:
+	mddev_unlock_and_resume(mddev);
+out_mddev_put:
+	mddev_put(mddev);
+}
+
+static int __init raid_setup(char *str)
+{
+	int len, pos;
+
+	len = strlen(str) + 1;
+	pos = 0;
+
+	while (pos < len) {
+		char *comma = strchr(str+pos, ',');
+		int wlen;
+		if (comma)
+			wlen = (comma-str)-pos;
+		else	wlen = (len-1)-pos;
+
+		if (!strncmp(str, "noautodetect", wlen))
+			raid_noautodetect = 1;
+		if (!strncmp(str, "autodetect", wlen))
+			raid_noautodetect = 0;
+		if (strncmp(str, "partitionable", wlen)==0)
+			raid_autopart = 1;
+		if (strncmp(str, "part", wlen)==0)
+			raid_autopart = 1;
+		pos += wlen+1;
+	}
+	return 1;
+}
+
+__setup("raid=", raid_setup);
+__setup("md=", md_setup);
+
+static void __init autodetect_raid(void)
+{
+	/*
+	 * Since we don't want to detect and use half a raid array, we need to
+	 * wait for the known devices to complete their probing
+	 */
+	printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
+	printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
+
+	wait_for_device_probe();
+	md_autostart_arrays(raid_autopart);
+}
+
+void __init md_run_setup(void)
+{
+	int ent;
+
+	if (raid_noautodetect)
+		printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n");
+	else
+		autodetect_raid();
+
+	for (ent = 0; ent < md_setup_ents; ent++)
+		md_setup_drive(&md_setup_args[ent]);
+}