Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 96 insertions, 0 deletions

diff --git a/drivers/md/dm-vdo/status-codes.c b/drivers/md/dm-vdo/status-codes.c
new file mode 100644
index 000000000..9df5e4d7f
--- /dev/null
+++ b/drivers/md/dm-vdo/status-codes.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2023 Red Hat
+ */
+
+#include "status-codes.h"
+
+#include "errors.h"
+#include "logger.h"
+#include "permassert.h"
+#include "thread-utils.h"
+
+const struct error_info vdo_status_list[] = {
+	{ "VDO_NOT_IMPLEMENTED", "Not implemented" },
+	{ "VDO_OUT_OF_RANGE", "Out of range" },
+	{ "VDO_REF_COUNT_INVALID", "Reference count would become invalid" },
+	{ "VDO_NO_SPACE", "Out of space" },
+	{ "VDO_BAD_CONFIGURATION", "Bad configuration option" },
+	{ "VDO_COMPONENT_BUSY", "Prior operation still in progress" },
+	{ "VDO_BAD_PAGE", "Corrupt or incorrect page" },
+	{ "VDO_UNSUPPORTED_VERSION", "Unsupported component version" },
+	{ "VDO_INCORRECT_COMPONENT", "Component id mismatch in decoder" },
+	{ "VDO_PARAMETER_MISMATCH", "Parameters have conflicting values" },
+	{ "VDO_UNKNOWN_PARTITION", "No partition exists with a given id" },
+	{ "VDO_PARTITION_EXISTS", "A partition already exists with a given id" },
+	{ "VDO_INCREMENT_TOO_SMALL", "Physical block growth of too few blocks" },
+	{ "VDO_CHECKSUM_MISMATCH", "Incorrect checksum" },
+	{ "VDO_LOCK_ERROR", "A lock is held incorrectly" },
+	{ "VDO_READ_ONLY", "The device is in read-only mode" },
+	{ "VDO_SHUTTING_DOWN", "The device is shutting down" },
+	{ "VDO_CORRUPT_JOURNAL", "Recovery journal corrupted" },
+	{ "VDO_TOO_MANY_SLABS", "Exceeds maximum number of slabs supported" },
+	{ "VDO_INVALID_FRAGMENT", "Compressed block fragment is invalid" },
+	{ "VDO_RETRY_AFTER_REBUILD", "Retry operation after rebuilding finishes" },
+	{ "VDO_BAD_MAPPING", "Invalid page mapping" },
+	{ "VDO_BIO_CREATION_FAILED", "Bio creation failed" },
+	{ "VDO_BAD_MAGIC", "Bad magic number" },
+	{ "VDO_BAD_NONCE", "Bad nonce" },
+	{ "VDO_JOURNAL_OVERFLOW", "Journal sequence number overflow" },
+	{ "VDO_INVALID_ADMIN_STATE", "Invalid operation for current state" },
+};
+
+/**
+ * vdo_register_status_codes() - Register the VDO status codes.
+ * Return: A success or error code.
+ */
+int vdo_register_status_codes(void)
+{
+	int result;
+
+	BUILD_BUG_ON((VDO_STATUS_CODE_LAST - VDO_STATUS_CODE_BASE) !=
+		     ARRAY_SIZE(vdo_status_list));
+
+	result = uds_register_error_block("VDO Status", VDO_STATUS_CODE_BASE,
+					  VDO_STATUS_CODE_BLOCK_END, vdo_status_list,
+					  sizeof(vdo_status_list));
+	return (result == UDS_SUCCESS) ? VDO_SUCCESS : result;
+}
+
+/**
+ * vdo_status_to_errno() - Given an error code, return a value we can return to the OS.
+ * @error: The error code to convert.
+ *
+ * The input error code may be a system-generated value (such as -EIO), an errno macro used in our
+ * code (such as EIO), or a UDS or VDO status code; the result must be something the rest of the OS
+ * can consume (negative errno values such as -EIO, in the case of the kernel).
+ *
+ * Return: A system error code value.
+ */
+int vdo_status_to_errno(int error)
+{
+	char error_name[VDO_MAX_ERROR_NAME_SIZE];
+	char error_message[VDO_MAX_ERROR_MESSAGE_SIZE];
+
+	/* 0 is success, negative a system error code */
+	if (likely(error <= 0))
+		return error;
+	if (error < 1024)
+		return -error;
+
+	/* VDO or UDS error */
+	switch (error) {
+	case VDO_BAD_CONFIGURATION:
+		return -EINVAL;
+	case VDO_NO_SPACE:
+		return -ENOSPC;
+	case VDO_READ_ONLY:
+		return -EIO;
+	default:
+		vdo_log_info("%s: mapping internal status code %d (%s: %s) to EIO",
+			     __func__, error,
+			     uds_string_error_name(error, error_name, sizeof(error_name)),
+			     uds_string_error(error, error_message, sizeof(error_message)));
+		return -EIO;
+	}
+}