Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 48 insertions, 0 deletions

diff --git a/drivers/md/dm-builtin.c b/drivers/md/dm-builtin.c
new file mode 100644
index 000000000..e51076ea6
--- /dev/null
+++ b/drivers/md/dm-builtin.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "dm-core.h"
+
+/*
+ * The kobject release method must not be placed in the module itself,
+ * otherwise we are subject to module unload races.
+ *
+ * The release method is called when the last reference to the kobject is
+ * dropped. It may be called by any other kernel code that drops the last
+ * reference.
+ *
+ * The release method suffers from module unload race. We may prevent the
+ * module from being unloaded at the start of the release method (using
+ * increased module reference count or synchronizing against the release
+ * method), however there is no way to prevent the module from being
+ * unloaded at the end of the release method.
+ *
+ * If this code were placed in the dm module, the following race may
+ * happen:
+ *  1. Some other process takes a reference to dm kobject
+ *  2. The user issues ioctl function to unload the dm device
+ *  3. dm_sysfs_exit calls kobject_put, however the object is not released
+ *     because of the other reference taken at step 1
+ *  4. dm_sysfs_exit waits on the completion
+ *  5. The other process that took the reference in step 1 drops it,
+ *     dm_kobject_release is called from this process
+ *  6. dm_kobject_release calls complete()
+ *  7. a reschedule happens before dm_kobject_release returns
+ *  8. dm_sysfs_exit continues, the dm device is unloaded, module reference
+ *     count is decremented
+ *  9. The user unloads the dm module
+ * 10. The other process that was rescheduled in step 7 continues to run,
+ *     it is now executing code in unloaded module, so it crashes
+ *
+ * Note that if the process that takes the foreign reference to dm kobject
+ * has a low priority and the system is sufficiently loaded with
+ * higher-priority processes that prevent the low-priority process from
+ * being scheduled long enough, this bug may really happen.
+ *
+ * In order to fix this module unload race, we place the release method
+ * into a helper code that is compiled directly into the kernel.
+ */
+
+void dm_kobject_release(struct kobject *kobj)
+{
+	complete(dm_get_completion_from_kobject(kobj));
+}
+EXPORT_SYMBOL(dm_kobject_release);