Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 175 insertions, 0 deletions

diff --git a/drivers/md/bcache/journal.h b/drivers/md/bcache/journal.h
new file mode 100644
index 000000000..9e9d1b301
--- /dev/null
+++ b/drivers/md/bcache/journal.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _BCACHE_JOURNAL_H
+#define _BCACHE_JOURNAL_H
+
+/*
+ * THE JOURNAL:
+ *
+ * The journal is treated as a circular buffer of buckets - a journal entry
+ * never spans two buckets. This means (not implemented yet) we can resize the
+ * journal at runtime, and will be needed for bcache on raw flash support.
+ *
+ * Journal entries contain a list of keys, ordered by the time they were
+ * inserted; thus journal replay just has to reinsert the keys.
+ *
+ * We also keep some things in the journal header that are logically part of the
+ * superblock - all the things that are frequently updated. This is for future
+ * bcache on raw flash support; the superblock (which will become another
+ * journal) can't be moved or wear leveled, so it contains just enough
+ * information to find the main journal, and the superblock only has to be
+ * rewritten when we want to move/wear level the main journal.
+ *
+ * Currently, we don't journal BTREE_REPLACE operations - this will hopefully be
+ * fixed eventually. This isn't a bug - BTREE_REPLACE is used for insertions
+ * from cache misses, which don't have to be journaled, and for writeback and
+ * moving gc we work around it by flushing the btree to disk before updating the
+ * gc information. But it is a potential issue with incremental garbage
+ * collection, and it's fragile.
+ *
+ * OPEN JOURNAL ENTRIES:
+ *
+ * Each journal entry contains, in the header, the sequence number of the last
+ * journal entry still open - i.e. that has keys that haven't been flushed to
+ * disk in the btree.
+ *
+ * We track this by maintaining a refcount for every open journal entry, in a
+ * fifo; each entry in the fifo corresponds to a particular journal
+ * entry/sequence number. When the refcount at the tail of the fifo goes to
+ * zero, we pop it off - thus, the size of the fifo tells us the number of open
+ * journal entries
+ *
+ * We take a refcount on a journal entry when we add some keys to a journal
+ * entry that we're going to insert (held by struct btree_op), and then when we
+ * insert those keys into the btree the btree write we're setting up takes a
+ * copy of that refcount (held by struct btree_write). That refcount is dropped
+ * when the btree write completes.
+ *
+ * A struct btree_write can only hold a refcount on a single journal entry, but
+ * might contain keys for many journal entries - we handle this by making sure
+ * it always has a refcount on the _oldest_ journal entry of all the journal
+ * entries it has keys for.
+ *
+ * JOURNAL RECLAIM:
+ *
+ * As mentioned previously, our fifo of refcounts tells us the number of open
+ * journal entries; from that and the current journal sequence number we compute
+ * last_seq - the oldest journal entry we still need. We write last_seq in each
+ * journal entry, and we also have to keep track of where it exists on disk so
+ * we don't overwrite it when we loop around the journal.
+ *
+ * To do that we track, for each journal bucket, the sequence number of the
+ * newest journal entry it contains - if we don't need that journal entry we
+ * don't need anything in that bucket anymore. From that we track the last
+ * journal bucket we still need; all this is tracked in struct journal_device
+ * and updated by journal_reclaim().
+ *
+ * JOURNAL FILLING UP:
+ *
+ * There are two ways the journal could fill up; either we could run out of
+ * space to write to, or we could have too many open journal entries and run out
+ * of room in the fifo of refcounts. Since those refcounts are decremented
+ * without any locking we can't safely resize that fifo, so we handle it the
+ * same way.
+ *
+ * If the journal fills up, we start flushing dirty btree nodes until we can
+ * allocate space for a journal write again - preferentially flushing btree
+ * nodes that are pinning the oldest journal entries first.
+ */
+
+/*
+ * Only used for holding the journal entries we read in btree_journal_read()
+ * during cache_registration
+ */
+struct journal_replay {
+	struct list_head	list;
+	atomic_t		*pin;
+	struct jset		j;
+};
+
+/*
+ * We put two of these in struct journal; we used them for writes to the
+ * journal that are being staged or in flight.
+ */
+struct journal_write {
+	struct jset		*data;
+#define JSET_BITS		3
+
+	struct cache_set	*c;
+	struct closure_waitlist	wait;
+	bool			dirty;
+	bool			need_write;
+};
+
+/* Embedded in struct cache_set */
+struct journal {
+	spinlock_t		lock;
+	spinlock_t		flush_write_lock;
+	bool			btree_flushing;
+	bool			do_reserve;
+	/* used when waiting because the journal was full */
+	struct closure_waitlist	wait;
+	struct closure		io;
+	int			io_in_flight;
+	struct delayed_work	work;
+
+	/* Number of blocks free in the bucket(s) we're currently writing to */
+	unsigned int		blocks_free;
+	uint64_t		seq;
+	DECLARE_FIFO(atomic_t, pin);
+
+	BKEY_PADDED(key);
+
+	struct journal_write	w[2], *cur;
+};
+
+/*
+ * Embedded in struct cache. First three fields refer to the array of journal
+ * buckets, in cache_sb.
+ */
+struct journal_device {
+	/*
+	 * For each journal bucket, contains the max sequence number of the
+	 * journal writes it contains - so we know when a bucket can be reused.
+	 */
+	uint64_t		seq[SB_JOURNAL_BUCKETS];
+
+	/* Journal bucket we're currently writing to */
+	unsigned int		cur_idx;
+
+	/* Last journal bucket that still contains an open journal entry */
+	unsigned int		last_idx;
+
+	/* Bio for journal reads/writes to this device */
+	struct bio		bio;
+	struct bio_vec		bv[8];
+};
+
+#define BTREE_FLUSH_NR	8
+
+#define journal_pin_cmp(c, l, r)				\
+	(fifo_idx(&(c)->journal.pin, (l)) > fifo_idx(&(c)->journal.pin, (r)))
+
+#define JOURNAL_PIN	20000
+
+#define journal_full(j)						\
+	(!(j)->blocks_free || fifo_free(&(j)->pin) <= 1)
+
+struct closure;
+struct cache_set;
+struct btree_op;
+struct keylist;
+
+atomic_t *bch_journal(struct cache_set *c,
+		      struct keylist *keys,
+		      struct closure *parent);
+void bch_journal_next(struct journal *j);
+void bch_journal_mark(struct cache_set *c, struct list_head *list);
+void bch_journal_meta(struct cache_set *c, struct closure *cl);
+int bch_journal_read(struct cache_set *c, struct list_head *list);
+int bch_journal_replay(struct cache_set *c, struct list_head *list);
+
+void bch_journal_free(struct cache_set *c);
+int bch_journal_alloc(struct cache_set *c);
+void bch_journal_space_reserve(struct journal *j);
+
+#endif /* _BCACHE_JOURNAL_H */